XA7A50T-2CPG236I - 50T Artix-7 XA FPGA | AMD
MPN: XA7A50T-2CPG236I ✓ AktifXA7A50T-2CPG236I Ringkasan
An FPGA is a semiconductor whose digital logic can be configured after manufacture. It belongs to the programmable-logic hierarchy and can implement parallel processing, control, communications, signal conditioning, and interface functions. The Artix-7 XA family targets applications requiring adaptive logic, high I/O density, and efficient performance without the resources of a larger FPGA.
The XA7A50T designation identifies a 50,000-class Artix-7 XA device, while the -2 suffix identifies its performance grade. Key characteristics include 106 inputs and 106 outputs, a nominal 1 V core supply, a permitted supply range of 0.95 V to 1.05 V, and operation up to a 1286 MHz maximum clock frequency. These parameters suit designs requiring multiple high-speed parallel paths and deterministic digital control.
The FPGA architecture permits hardware functions to be mapped directly into parallel logic rather than executed sequentially by a general-purpose processor. This can reduce external component count, shorten data paths, and consolidate protocol, acquisition, and control functions in one device. Because a CSPBGA package requires careful escape routing and power distribution, the board design must include the device-specific pinout and reference design guidance from AMD/Xilinx.
Typical applications include industrial automation, data acquisition, communications infrastructure, test and measurement, embedded control, and high-speed signal processing. The 106 I/Os are particularly useful for parallel sensor interfaces, digital control buses, memory interfaces, and multiple low-speed communication channels. The -2 performance grade and XA family positioning make the device appropriate for designs requiring a balance of logic capacity, I/O access, and operating reliability.
Power delivery is a central design consideration for this 1.05 V maximum-core-supply device. The PCB should provide clean, low-impedance connections to every power terminal and adequate decoupling close to the package. Signal-integrity practices should also be applied to high-speed interfaces, with return paths, reference planes, and connector transitions considered together.
This product summary combines the key electrical, packaging, sourcing, replacement, and design information engineers need to evaluate the XA7A50T-2CPG236I. It also highlights pinout and lifecycle checks that should be completed against the manufacturer datasheet before schematic capture, PCB layout, or production release.
Pilihan pengganti yang segera untuk XA7A50T-2CPG236I — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
XA7A50T-1CPG236Q
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →XA7A50T-1CPG236C
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
XC7A50T-2CPG236I
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
XC7A50T-2CPG236C
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
XA7A50T-2CPG236C
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
XA7A50T-2CPG236I Penilaian maksimum & Ciri-ciri Elektrik
| FPGA Family | Artix-7 XA |
| Device Designation | XA7A50T |
| Number of I/Os | 106 |
| Number of Inputs | 106 |
| Bilangan Output | 106 |
| Number of Package Terminals | 236 |
| Nominal Core Supply Voltage | 1 V |
| Minimum Core Supply Voltage | 0.95 V |
| Maximum Core Supply Voltage | 1.05 V |
| Frekuensi Klock Maksimum | 1286 MHz |
| Performance Grade | -2 |
| Kemasan | 238-CSBGA (CPG236) |
| Jenis Pemasangan | Surface mount |
Panduan Konfigurasi Pin XA7A50T-2CPG236I 238-csbga (cpg236)
Konfigurasi pin untuk XA7A50T-2CPG236I (238-csbga (cpg236) pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk XA7A50T-2CPG236I.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
XA7A50T-2CPG236I patut untuk 6 aplikasis: Industrial Automation and Control, Parallel Data Acquisition, Communications Infrastructure, Test and Measurement, Embedded Control Platform, Aerospace and High-Reliability Systems.
Industrial Automation and Control
XA7A50T-2CPG236I is well suited to industrial automation because its 106 I/Os can support parallel sensors, actuators, encoders, and digital control logic in a single programmable device. The -2 performance grade and maximum clock frequency of 1286 MHz provide capacity for deterministic control and parallel data paths. Place the FPGA between field-level I/O and a communications processor, then implement acquisition, debounce, state-machine, and safety interlocks in parallel logic. Its nominal 1 V core supply requires a carefully decoupled power network, while the 238-CSBGA footprint demands package-aware escape routing and thermal verification.
Disebarkan
Parallel Data Acquisition
The 106 I/Os of XA7A50T-2CPG236I make it useful for collecting multiple channels of digital and low-speed analog-control information in parallel. Its maximum clock frequency of 1286 MHz supports tightly pipelined acquisition stages, while programmable logic can combine sampling control, timestamp capture, filtering, and buffer management. A practical system can use FPGA I/O for sensor and trigger signals and connect to external memory or a processing module over a validated parallel interface. Timing closure must account for I/O standards, pin placement, clock skew, and board-level channel skew, particularly where simultaneous sampling accuracy is required.
Disebarkan
Communications Infrastructure
XA7A50T-2CPG236I can implement parallel transport functions, protocol conversion, monitoring, and packet processing where deterministic hardware throughput is important. The 106-I/O count provides substantial connectivity for parallel datapaths, control signals, and network-facing interfaces, while the -2 grade supports demanding timing-oriented designs. Implement line-rate adaptation, framing, CRC generation, and traffic shaping as parallel pipelines, then use external PHY or network devices for the physical layer. The design must verify pin constraints and timing for each supported interface, and the PCB should preserve continuous return paths beneath high-speed routes to minimize signal-integrity problems.
Disebarkan
Test and Measurement
XA7A50T-2CPG236I is appropriate for test and measurement equipment that benefits from programmable acquisition, sequencing, and analysis logic. Its 106 I/Os can connect instruments, trigger sources, status lines, and external converters, while the maximum clock frequency of 1286 MHz enables deeply pipelined digital processing. A typical design can capture multiple channels, apply real-time filtering, and perform threshold analysis or histogram processing in parallel. For metrology-grade results, engineers must characterize clock jitter, channel-to-channel skew, I/O voltage thresholds, and power-supply noise. The same package can be evaluated across related -1 and -2 grade variants when timing closure permits.
Disebarkan
Embedded Control Platform
XA7A50T-2CPG236I can consolidate real-time control tasks that would otherwise occupy multiple discrete processors, interface chips, and programmable logic devices. Its 106 I/Os support motor and actuator controls, local bus interfaces, interlocks, and monitoring channels, while parallel logic offers deterministic response. The FPGA can execute a hardware state machine for sequencing and offload repetitive control operations from a higher-level processor. Critical design work includes separating power rails, following the configuration and startup requirements, validating every power terminal, and defining safe behavior when external sensors or actuators enter an invalid state. The -2 grade is attractive when timing margins are more important than the lowest possible unit cost.
Disebarkan
Aerospace and High-Reliability Systems
XA7A50T-2CPG236I may fit high-reliability digital subsystems that require programmable logic, extensive I/O, and a compact surface-mount package. The Artix-7 XA family is identified in the manufacturer documentation, and the device offers 106 I/Os with a -2 performance grade for parallel processing tasks such as telemetry, command decoding, health monitoring, and fault containment. Selection for flight or mission-critical use must include a formal review of radiation, temperature, qualification, longevity, and procurement requirements. The PCB should implement the recommended power and decoupling topology, while configuration storage, watchdog behavior, and fault-response logic should be designed according to the complete manufacturer documentation.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk XA7A50T-2CPG236I — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | XA7A50T-1CPG236Q | XA7A50T-1CPG236C | XC7A50T-2CPG236I | XC7A50T-2CPG236C | XA7A50T-2CPG236C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 238-CSBGA (CPG236) | 238-CSBGA (CPG236) | 238-CSBGA (CPG236) | 238-CSBGA (CPG236) | 238-CSBGA (CPG236) | 238-CSBGA (CPG236) |
| FPGA Family | Artix-7 XA | Artix-7 XA | Artix-7 XA | Artix-7 XC | Artix-7 XC | Artix-7 XA |
| Performance Grade | -2 | -1 | -1 | -2 | -2 | -2 |
Penyeberangsung Jelas
- Higher performance grade within the same XA7A50T package family (vsXA7A50T-1CPG236Q)
- Artix-7 XA family positioning with a high parallel-I/O count (vsXC7A50T-2CPG236I)
- One-package consolidation for high-channel digital systems (vsXC7A50T-2CPG236C)
Catatan Desain
Design the XA7A50T-2CPG236I power tree around the device-specific requirements for the 1 V nominal core rail, whose stated operating range is 0.95 V to 1.05 V. Separate core and auxiliary supplies where required, place decoupling capacitance directly at the relevant package balls, and minimize impedance between the regulator and the device. Validate steady-state and transient voltage at the pins because nominal rail voltage alone does not establish margin at the FPGA.
Use the AMD Artix-7 package device pinout files and the 238-CSBGA land pattern rather than assigning BGA balls from memory. Preserve uninterrupted reference planes beneath the FPGA, minimize via-stub lengths, and provide adequate escape routing for 106 user I/Os. Check interface pin constraints during placement so high-speed groups, clocks, configuration pins, and dedicated power terminals occupy sensible locations without violating the manufacturer’s simultaneous-switching guidance.
Apply endpoint, edge-rate, and return-path analysis to every high-speed interface rather than routing solely according to nominal clock frequency. The stated 1286 MHz maximum clock is a device capability, not a board-level guarantee. Use controlled-impedance topology where applicable, keep clocks away from noisy interfaces, include matched termination or series damping according to the interface specification, and verify eye margin, jitter, and crosstalk through post-layout simulation.
Do not assume that a shared CPG236 package makes every XA7A50T or XC7A50T ordering code interchangeable. The -1 and -2 suffixes denote different performance grades, while XA and XC family suffixes may carry different operating or qualification requirements. Before substitution, compare the complete datasheet, pinout file, timing limits, temperature requirements, configuration method, and system timing results. A successful footprint fit does not by itself prove drop-in qualification.
Maklumat Kesediaan
Compliance attributes require confirmation from the current manufacturer product record or declaration for the exact orderable MPN.