XC3S1500-5FG320C - 1.5M Gate Spartan-3 FPGA | AMD
MPN: XC3S1500-5FG320C ✗ Akhir HayatXC3S1500-5FG320C Ringkasan
A field-programmable gate array is a semiconductor whose digital logic, interconnects, and I/O behavior are configured after manufacture. An FPGA belongs to the programmable-logic hierarchy, where a CPLD provides comparatively simpler fixed-capacity structures while an FPGA offers substantially greater logic density, routing flexibility, and signal-processing resources. The Spartan-3 family occupies the middle ground between small CPLDs and larger high-end FPGAs, targeting cost-sensitive designs that still require considerable parallelism and configurable peripherals.
The XC3S1500-5FG320C provides 29,952 logic cells, 1,500,000 system gates, and 221 I/O. Its 90 nm fabrication supports a core supply of 1.2 V, while the -5 suffix identifies its performance grade. The 320-pin FBGA package reduces lead pitch and provides a compact implementation for systems requiring numerous board connections. These characteristics allow one package to carry control logic, memory interfaces, serial links, parallel buses, and arithmetic functions rather than requiring several separate programmable devices.
The programmable architecture supports parallel datapaths that can improve throughput through hardware pipelining and resource replication. Designers can assign logic to look-up tables, connect it through programmable routing, and instantiate dedicated block RAM or multiplier resources when regular logic would consume excessive area or power. Performance is design-dependent because routing congestion, external memory speed, I/O standards, clocking, and tool constraints influence the final clock rate. The 725 MHz figure associated with this device family should therefore not be interpreted as a guaranteed system frequency for every design.
Typical uses include industrial automation controllers, video-processing pipelines, communication gateways, data-acquisition systems, and embedded instruments. The 221 available I/O are valuable for parallel sensor interfaces, memory buses, control signals, and external converters. Because the FPGA can execute several operations concurrently, it can implement protocol conversion, filtering, buffering, and control functions in parallel. This reduces reliance on multiple processors when deterministic operation and direct hardware interaction are important.
PCB implementation requires careful attention to the fine-pitch BGA footprint, power-plane geometry, via distribution, and ball-assignment constraints. Decoupling and multiple power rails must follow the manufacturer’s pinout and reference guidance. Signal integrity also depends on controlled-impedance routing for clocks and high-speed interfaces. Before committing a layout, engineers should generate the physical constraints and perform stackup-aware signal-integrity analysis rather than treating the compact package as a conventional fine-pitch BGA breakout task.
This page combines device specifications, package and lifecycle information, qualification of same-footprint alternatives, parameter comparisons, and practical PCB-design guidance. The alternatives listed are restricted to pin-compatible Spartan-3 package variants, while unavailable technical details are clearly marked for datasheet review. This engineering-focused synthesis helps buyers compare migration choices while keeping board-level compatibility and timing closure as the primary decision criteria.
Pilihan pengganti yang segera untuk XC3S1500-5FG320C — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
XC3S1500-5FGG320C
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
XC3S1500-4FGG320C
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
XC3S1500-4FG320C
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak DisahkanHubungi untuk harga
Lihat Datasheet →XC3S1500-5FG320I
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
XC3S1500-4FG320I
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak DisahkanHubungi untuk harga
Lihat Datasheet →XC3S1500-5FG320C Penilaian maksimum & Ciri-ciri Elektrik
| Device Type | Field Programmable Gate Array (FPGA) |
| FPGA Family | Spartan-3 |
| System Gates | 1,500,000 gates |
| Logic Cells | 29,952 cells |
| Maximum Device Frequency | 725 MHz |
| Core Supply Voltage | 1.2 V |
| Process Technology | 90 nm |
| User I/O Count | 221 I/O |
| Package Type | 320-pin FBGA |
| Package Pin Count | 320 pins |
| Performance Grade | -5 |
| Suhu Operasi | 0°C to 85°C |
Panduan Konfigurasi Pin XC3S1500-5FG320C 320 pins
Konfigurasi pin untuk XC3S1500-5FG320C (320 pins pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk XC3S1500-5FG320C.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
XC3S1500-5FG320C patut untuk 6 aplikasis: Industrial Automation Controller, Data-Acquisition and Signal Conditioning, Video and Image Processing, Communication Protocol Gateway, Embedded Test and Measurement, Security and Access Control.
Industrial Automation Controller
The XC3S1500-5FG320C fits industrial automation controllers that combine deterministic sequencing, parallel I/O, communications, and motion-control logic in one FPGA. Its 29,952 logic cells provide substantial parallelism, while 221 I/O can connect encoders, sensors, actuators, safety interlocks, and external converters. The 1.2 V core supply and 90 nm architecture also make the device suitable for established control platforms designed around the Spartan-3 family. Engineers can implement state machines, interpolators, protocol converters, and fault handling in parallel to reduce reliance on a separate microcontroller. The listed 0°C to 85°C operating range suits controlled indoor equipment, although deployed temperature, vibration, and regulatory requirements must be reviewed before production release.
Disebarkan
Data-Acquisition and Signal Conditioning
The XC3S1500-5FG320C is appropriate for parallel data-acquisition systems requiring synchronized sampling control, digital filtering, and interface conversion. The programmable logic fabric can execute fixed-point filters, counters, trigger logic, and channel interleaving concurrently, while 221 I/O support wide data buses and multiple peripheral connections. A 725 MHz family benchmark can support fast internal processing, although the guaranteed acquisition rate depends on routing, memory bandwidth, clocking, and external converter timing. The 320-pin FBGA also provides a practical route for integrating several converters, memory devices, and communication PHYs on a compact board. Place clock and data interfaces with controlled impedance, and use pipeline registers at converter boundaries to prevent timing degradation from combinational routing delays.
Disebarkan
Video and Image Processing
The XC3S1500-5FG320C can implement parallel video timing, pixel formatting, color conversion, test-pattern generation, and interface bridging. Its 29,952 logic cells and 221 I/O allow multiple pipeline stages to operate concurrently, which is valuable for line-based processing and real-time inspection. Dedicated multipliers can accelerate selected arithmetic operations, while block memories can buffer rows or frames when supported by the selected design configuration. The compact 320-pin FBGA also offers enough connectivity for parallel or high-speed source interfaces. Timing closure should be based on routed design results rather than the 725 MHz family figure, and video clock domains require disciplined reset and clock-domain-crossing treatment to prevent metastability or corrupted frames.
Disebarkan
Communication Protocol Gateway
The XC3S1500-5FG320C suits communication gateways that must translate between serial, parallel, and memory-mapped interfaces. Programmable logic can perform framing, checksum generation, FIFO control, packet filtering, and bus arbitration simultaneously, reducing processor overhead and improving deterministic response. The 221 I/O provide connections for multiple PHY devices, status indicators, and configuration interfaces, while the 1.5 million-gate device offers room for several protocol engines. Design the system around a single low-jitter clock or implement proper asynchronous clock-domain crossings between independent interfaces. Validate protocol timing under maximum traffic, check worst-case routing delays after implementation, and reserve configuration pins and memory interfaces according to the exact manufacturer ball map.
Disebarkan
Embedded Test and Measurement
The XC3S1500-5FG320C is useful in embedded test and measurement equipment requiring precise timing, concurrent stimulus generation, and real-time analysis. FPGA logic can coordinate pulse generators, counters, waveform capture, digital pattern generation, and data reduction without relying entirely on a CPU. The 221 I/O support probes, trigger interfaces, status buses, and converters, while the large programmable fabric permits configurable measurement pipelines. The device’s 320-pin FBGA requires careful decoupling and high-density assembly, but it supports a compact instrument architecture. Engineers should define timing constraints from the instrument specification, account for probe loading and board skew, and perform signal-integrity simulations for high-speed analog interfaces and clock distribution before the first fabrication release.
Disebarkan
Security and Access Control
The XC3S1500-5FG320C can implement hardware-assisted security, access-control, and cryptographic-control functions when the required algorithm cores are properly licensed and integrated. Its parallel fabric can accelerate matching, bit manipulation, stream processing, and protocol handling, while 221 I/O support readers, sensors, displays, and network interfaces. A dedicated programmable-logic implementation can reduce latency and keep sensitive operations under direct hardware control. Because the device belongs to an obsolete Spartan-3 generation, projects must carefully assess silicon provenance, configuration-security features, tool support, and long-term availability. Cryptographic functions should be evaluated for algorithm strength and side-channel resistance rather than inferred from FPGA capacity, and configuration access should be restricted to prevent unauthorized bitstream modification.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk XC3S1500-5FG320C — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | XC3S1500-5FGG320C | XC3S1500-4FGG320C | XC3S1500-4FG320C | XC3S1500-5FG320I | XC3S1500-4FG320I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 320-pin FBGA | 320-pin FBGA | 320-pin FBGA | 320-pin FBGA | 320-pin FBGA | 320-pin FBGA |
| FPGA Family | Spartan-3 | Spartan-3 | Spartan-3 | Spartan-3 | Spartan-3 | Spartan-3 |
| Performance Grade | -5 | -5 | -4 | -4 | -5 | -4 |
Penyeberangsung Jelas
- Higher performance grade than -4 alternatives (vsXC3S1500-4FGG320C)
- Direct same-package resource match (vsXC3S1500-5FGG320C)
- Commercial temperature qualification versus an I-grade family option (vsXC3S1500-5FG320I)
Catatan Desain
Treat the 320-pin FBGA footprint as a high-density routed-pin design rather than a conventional two-row breakout. Assign power and ground balls directly from the manufacturer package drawing, place decoupling capacitors close to their associated supply pins, and use an uninterrupted ground reference plane. PCB assembly capability, solder-paste volume, stencil aperture design, component placement, and X-ray inspection access should be reviewed before layout release.
Create stackup-aware constraints for clocks and high-speed interfaces, then simulate return paths, crosstalk, and impedance discontinuities with realistic PCB and component models. The 725 MHz family figure does not guarantee a 725 MHz routed clock in an arbitrary design. Use dedicated clock-capable pins, minimize stubs, avoid plane splits beneath high-speed nets, and apply source-synchronous timing constraints based on external-device timing rather than device frequency alone.
Implement the complete power tree, including the 1.2 V core supply and auxiliary rails, using the exact datasheet requirements. Check steady-state and transient current for the highest-utilization design rather than assuming average logic activity. Sequence supplies and configure unused pins as defined by the manufacturer. Validate power-up, power-down, and restart behavior because incorrect ramp rates or sequencing can cause configuration failure even when steady-state voltage appears correct.
Do not select a substitute solely because it contains the XC3S1500 name or a 320-ball package. Confirm the complete ordering code, ball map, speed grade, temperature grade, supported I/O standards, configuration interface, and tool compatibility. For a -5 to -4 migration, rerun implementation and timing analysis; a lower numeric performance grade can change achievable timing without changing the board footprint. Also preserve configuration and security implications when changing legacy device variants.
Maklumat Kesediaan
A lead-free package indication appears in a third-party snippet, but no authoritative RoHS, REACH, halogen-free, or conflict-minerals declaration was identified for the exact MPN. Automotive qualification is not claimed for this commercial Spartan-3 device.