XC3S200-4PQ208I - 200K-Gate Spartan-3 FPGA | AMD Xilinx
MPN: XC3S200-4PQ208I ✓ AktifXC3S200-4PQ208I Ringkasan
A field-programmable gate array is a programmable semiconductor in which digital logic, interfaces, and system functions are configured after manufacture. Within the product hierarchy, an FPGA is a semiconductor and a programmable logic device. The Spartan-3 family targets cost-sensitive designs requiring more flexibility than fixed-function logic, while providing configurable logic blocks, dedicated arithmetic resources, block RAM, and programmable I/O within one integrated device.
The XC3S200-4PQ208I combines 480 configurable logic blocks with 4,320 logic cells and 141 user I/O according to the supplied manufacturer-family data. Its 200,000-system-gate count describes the family device's logic-equivalent capacity rather than a fixed gate count. The 630 MHz figure likewise requires careful interpretation because achievable system performance depends on the selected design, timing constraints, clocking, I/O standards, routing, and the associated Xilinx toolchain.
The 90 nm Spartan-3 architecture supports integration of control logic, data acquisition, communications glue logic, state machines, and modest parallel-processing functions. Reconfigurability allows design revisions to be implemented in the FPGA bitstream rather than through a PCB respin. Dedicated block RAM can buffer sampled or packet data, while programmable I/O can connect the device to external clocks, data buses, transceivers, displays, and industrial interfaces subject to voltage and timing constraints.
Typical uses include industrial automation, programmable logic controllers, motor-control and sensor-processing systems, embedded communications, instrumentation, and cost-sensitive consumer or control electronics. The 208-pin PQFP provides more I/O than a small FPGA package, making it useful where parallel external buses, control signals, or multiple interfaces must coexist with the Spartan-3 logic fabric.
Design planning should begin with the AMD/Xilinx Spartan-3 datasheet and the appropriate ISE or Vivado-era design flow for the installed device family. Verify the exact pinout, supported I/O standards, configuration requirements, decoupling, clock topology, and exposed thermal and power constraints on the selected package before layout release. This page consolidates verified distributor specifications, pricing references, same-family drop-in candidates, and practical selection considerations for engineers evaluating the XC3S200-4PQ208I.
Pilihan pengganti yang segera untuk XC3S200-4PQ208I — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera XC3S200-4PQ208I (sama faktor bentuk dan kaki) — berbeza dalam Configurable Logic Blocks, Device Type, Logic Cells, Operating Temperature, System Gates.
XC3S200-4PQG208I
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
XC3S200-4PQ208C
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak DisahkanHubungi untuk harga
Lihat Datasheet →XC3S200-4PQG208C
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
XC3S200-5PQ208I
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
XC3S200-5PQG208I
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
XC3S200-4PQ208I Penilaian maksimum & Ciri-ciri Elektrik
| Device Type | Field Programmable Gate Array (FPGA) |
| FPGA Family | Spartan-3 |
| System Gates | 200,000 |
| Logic Cells | 4,320 |
| Configurable Logic Blocks | 480 |
| User I/O | 141 |
| Maximum Stated Performance | 630 MHz |
| Process Technology | 90 nm CMOS |
| Core Supply Voltage | 1.2 V |
| Kemasan | 208-pin PQFP |
| Kiraan Pin | 208 pins |
| Suhu Operasi | -40 °C to +85 °C |
| Speed Grade | -4 |
| Temperature Grade | Industrial |
| Lead-Free Status | Lead free |
Panduan Konfigurasi Pin XC3S200-4PQ208I 208-pin pqfp
Konfigurasi pin untuk XC3S200-4PQ208I (208-pin pqfp pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk XC3S200-4PQ208I.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
XC3S200-4PQ208I patut untuk 6 aplikasis: Industrial Automation Controllers, Programmable Logic Control, Motor Control and Signal Conditioning, Embedded Communications Interfaces, Sensor Data Acquisition, Cost-Sensitive Embedded Instrumentation.
Industrial Automation Controllers
The XC3S200-4PQ208I fits industrial automation controllers because its 4,320 logic cells and 141 user I/O can combine sequencer logic, data acquisition, communication interfaces, and safety-adjacent monitoring in one Spartan-3 device. The -4 speed grade supports timing-oriented control logic, while the verified -40 °C to +85 °C industrial range covers typical factory environments. A designer would allocate I/O for sensors, actuator drives, status indicators, and communication transceivers, then use a clocked state machine to coordinate acquisition and control. The 208-pin PQFP also exposes more pins than compact packages, reducing the need for external I/O expanders. Before schematic release, verify each selected bank voltage, configuration source, clock input, and power requirement in the AMD/Xilinx package data.
Disebarkan
Programmable Logic Control
The XC3S200-4PQ208I is suitable for programmable logic control because 4,320 logic cells can implement multiple state machines, timing counters, interlocks, and data-routing functions while 141 user I/O supports field wiring and status signals. Its 200,000-system-gate density provides more capacity than a small programmable device without moving to the largest Spartan-3 devices. The FPGA can consolidate logic previously spread across discrete counters, timers, and glue logic, allowing firmware changes instead of hardware respins. Industrial-temperature operation supports equipment deployed outside controlled room conditions. Engineer the implementation with margin for worst-case timing and temperature, and use Spartan-3 power estimation and pin-planning tools before committing the board layout.
Disebarkan
Motor Control and Signal Conditioning
The XC3S200-4PQ208I can implement digital motor-control sequencing, sensor conditioning, pulse counting, fault capture, and communication formatting in a single Spartan-3 FPGA. Its 141 user I/O allow parallel interfaces to sensors, gate drivers, position feedback, and status buses, while 4,320 logic cells support control and datapath functions. The -4 grade is useful where deterministic logic timing is more important than minimum unit cost, and the industrial range supports factory machinery. The FPGA should not generate unsafe motor-control decisions without appropriate hardware and software safeguards. Validate timing against the selected external components, account for propagation delay and I/O slew behavior, and keep high-current switching paths separate from sensitive digital inputs.
Disebarkan
Embedded Communications Interfaces
The XC3S200-4PQ208I is well suited to protocol conversion, framing, buffering, and supervisory logic in embedded communication equipment. Its programmable I/O can accommodate multiple parallel buses and chip-select signals, while the Spartan-3 logic fabric can implement stateful packet handling without a separate microcontroller. The 208-pin PQFP offers a practical balance between logic capacity and external connectivity, and the industrial temperature range supports factory-network gateways and instrumentation. Clocking, data timing, and I/O voltage standards must be established before implementation. Use constraints that reflect actual board-level timing rather than nominal FPGA values, and reserve the configuration mechanism for reliable startup and field recovery.
Disebarkan
Sensor Data Acquisition
The XC3S200-4PQ208I can serve as the digital backbone of a sensor-acquisition subsystem, coordinating parallel sensor inputs, sample counters, filtering, threshold logic, and data transfer. Its 141 user I/O allows multiple converter or sensor-interface signals to coexist, while 4,320 logic cells support acquisition sequencing and local preprocessing. This is useful when the measurement chain requires deterministic timing or configurable logic that would be cumbersome in fixed-function devices. The -40 °C to +85 °C industrial range supports factory and process-monitoring equipment. Engineers should budget acquisition timing from the external sensor specifications, account for input threshold and I/O standard differences, and avoid treating the stated 630 MHz figure as a guaranteed sampling rate for every interface.
Disebarkan
Cost-Sensitive Embedded Instrumentation
The XC3S200-4PQ208I fits embedded instrumentation that requires programmable acquisition, display formatting, data logging, and control in one device. Its 200,000-system-gate and 4,320-cell density can consolidate several small-controller functions, while 141 user I/O simplifies connection to sensors, memory, human-interface logic, and communications. Reconfigurability enables field updates and product variants without redesigning the board. The Spartan-3 family was created for cost-sensitive applications, but the complete board-level result still depends on memory interface count, package availability, configuration method, and required I/O voltage standards. Validate the design with realistic timing constraints and check the selected package's thermal and power requirements before production release.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk XC3S200-4PQ208I — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | XC3S200-4PQG208I | XC3S200-4PQ208C | XC3S200-4PQG208C | XC3S200-5PQ208I | XC3S200-5PQG208I |
|---|---|---|---|---|---|---|
| Package | 208-pin PQFP | 208-pin PQFP | 208-pin PQFP | 208-pin PQFP | 208-pin PQFP | 208-pin PQFP |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| FPGA Family | Spartan-3 | Spartan-3 | Spartan-3 | Spartan-3 | Spartan-3 | Spartan-3 |
| System Gates | 200,000 | 200,000 | 200,000 | 200,000 | 200,000 | 200,000 |
| Logic Cells | 4,320 | 4,320 | 4,320 | 4,320 | 4,320 | 4,320 |
| User I/O | 141 | 141 | 141 | 141 | 141 | 141 |
| Speed Grade | -4 | -4 | -4 | -4 | -5 | -5 |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Process Technology | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS |
Penyeberangsung Jelas
- Closest verified same-family substitution candidate (vsXC3S200-4PQG208I)
- Higher-speed option within the same Spartan-3 density (vsXC3S200-5PQ208I)
- Broad 141-I/O interface capacity in the selected package (vsXC3S200-4PQ208C)
Catatan Desain
Treat the 208-pin PQFP land pattern as a high-pin-count escape and routing problem. Place the FPGA according to the official package drawing, preserve pin-1 orientation, and route power, ground, configuration, clock, and user I/O with the fanout required by the device. The verified excerpts do not include the complete pin table, so do not infer pin assignments from package position alone. Obtain the manufacturer package drawing and run the design through its I/O and power-planning tools before fabrication.
Separate the 1.2 V core supply requirement from external I/O voltage requirements; the supplied data does not define the complete power architecture. Follow the manufacturer guidance for bypass-capacitor placement, supply sequencing, and I/O-bank voltage compatibility. Estimated power cannot be stated responsibly without utilization, selected I/O standards, clocking, and temperature data. Use the Spartan-3 power estimator with a realistic design before assigning regulators and copper thermal capacity.
Do not treat the 630 MHz family figure as a guaranteed operating frequency for every XC3S200 design. Achievable frequency depends on the implemented path, clock source, I/O standard, pin placement, logic utilization, and timing constraints. Likewise, do not substitute ordering suffixes without checking the ordering guide: PQ, PQG, I, and C can affect package, lead, or temperature details even when the Spartan-3 density remains identical.
Plan configuration and startup behavior before assigning the remaining I/O. The verified excerpts do not identify the supported configuration interface, so use the official Spartan-3 data sheet and configuration guide to determine the required clock, programming source, startup behavior, and recovery method. Provide accessible test points for configuration signals and avoid placing sensitive analog or high-speed routing beneath regions where switching currents or FPGA supply noise could couple into the board.
Maklumat Kesediaan
The DigiKey result identifies the 208-pin PQFP device as lead free. No verified RoHS, REACH, halogen-free, or conflict-minerals statement was supplied. AEC-Q100 is not applicable because this is an FPGA rather than an automotive-qualified semiconductor order code.
