XC4VFX20-10FF672C - 19,224 Logic Cell Virtex-4 FX FPGA | AMD
MPN: XC4VFX20-10FF672C ✗ Akhir HayatXC4VFX20-10FF672C Ringkasan
A field-programmable gate array is a semiconductor whose logic, interconnect, and digital signal-processing resources are configured after manufacture. The FPGA hierarchy places this device in the Virtex-4 FX family, where it combines programmable logic blocks with dedicated DSP resources, general-purpose I/O, embedded memory, and clock-management circuitry. This makes the XC4VFX20 suitable when designers need parallel programmable logic and high-speed fixed-function processing on one device.
The principal device figures include 19,224 logic cells, 2,136 configurable logic blocks, 320 I/O, 1,028 MHz internal frequency, and a 1.2 V nominal supply. The 672-ball FCBGA package provides a high-density connection interface for designs requiring substantial external memory, parallel buses, high-speed transceivers, or multiple expansion interfaces. Its -10 suffix identifies the speed grade, while the commercial temperature range supports industrial-room-temperature laboratory, instrumentation, communications, and embedded-control systems.
The Virtex-4 architecture is implemented in 90 nm CMOS and uses Xilinx ASMBL architecture. Programmable logic can implement state machines, protocol controllers, arithmetic logic, and interface control, while DSP blocks accelerate filtering, correlation, waveform generation, and fixed-point signal-processing tasks. Designers should distinguish the reported 1,028 MHz internal frequency from the operating frequency available at every I/O or logic path; external timing depends on clock topology, pin location, routing, I/O standards, and design constraints.
Typical uses include industrial automation, test and measurement, communications infrastructure, embedded video processing, radar or signal-processing front ends, and high-speed interface aggregation. The large I/O count is particularly useful for parallel ADC and DAC interfaces, memory buses, network packet processing, and custom accelerator boards. A complete design also requires an FPGA configuration memory, compliant power rails, decoupling, clock routing, and a board-level thermal assessment.
For PCB implementation, use the AMD Virtex-4 package pinout files when assigning every one of the 672 package balls. Place decoupling and configuration components close to their associated supply pins, maintain the required ball-pad geometry, and follow the manufacturer's high-speed layout rules for clocks, differential pairs, and power distribution. Validate the final schematic, pin constraints, and configuration interface before fabrication.
This page combines the core Virtex-4 device specifications, ordering-code differences, practical application guidance, and drop-in comparison points to support faster engineering selection. The manufacturer family documentation and package pinout resources remain the controlling references for board design and device configuration.
Pilihan pengganti yang segera untuk XC4VFX20-10FF672C — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera XC4VFX20-10FF672C (sama faktor bentuk dan kaki) — berbeza dalam Device Type, Logic Family, Maximum Internal Frequency, Operating Temperature, User I/O.
XC4VFX20-10FF672I
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →XC4VFX20-10FFG672C
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
XC4VFX20-10FF672CS1
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
XC4VFX20-10FFG672CS1
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
XC4VFX20-10FF672C-ND
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
XC4VFX20-10FF672C Penilaian maksimum & Ciri-ciri Elektrik
| Device Type | Virtex-4 FX Field-Programmable Gate Array |
| Logic Cells | 19,224 cells |
| Configurable Logic Blocks | 2,136 CLBs |
| User I/O | 320 I/O |
| Package Pins | 672 pins |
| Package Type | 672-ball FCBGA, 27 mm × 27 mm |
| Logic Family | CMOS |
| Process Technology | 90 nm CMOS |
| Maximum Internal Frequency | 1,028 MHz |
| Nominal Core Supply Voltage | 1.2 V |
| Core Supply Voltage Range | 1.14 V to 1.26 V |
| Suhu Operasi | 0°C to 85°C |
| Speed Grade | -10 |
| Architecture | Xilinx ASMBL architecture |
| Jenis Pemasangan | Surface mount |
| Status RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_qualified |
| Lead-Free Status | unknown |
| Package Pitch | 1.00 mm |
Panduan Konfigurasi Pin XC4VFX20-10FF672C 1.00 mm
Konfigurasi pin untuk XC4VFX20-10FF672C (1.00 mm pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk XC4VFX20-10FF672C.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
XC4VFX20-10FF672C patut untuk 6 aplikasis: Industrial Automation and Control, High-Speed Data Acquisition, Communications Packet Processing, Test and Measurement Instrumentation, Digital Signal Processing, Legacy Equipment Maintenance.
Industrial Automation and Control
The XC4VFX20-10FF672C fits industrial controllers that combine parallel sensor and actuator interfaces with locally implemented control logic. Its 320 user I/O provide substantial connectivity for digital sensors, relay or transistor drive signals, encoders, and field-bus controllers, while 19,224 logic cells can host state machines, motion sequencing, diagnostics, and communication protocols. The 672-ball FCBGA also supports parallel buses to external memory or industrial peripherals. Because the commercial operating range is 0°C to 85°C, enclosure temperature and self-heating must remain within that range. For a new controller, also evaluate currently supported FPGA families because this Virtex-4 device is obsolete.
Disebarkan
High-Speed Data Acquisition
The XC4VFX20-10FF672C is suitable for parallel data-acquisition systems where an ADC or DAC bank must feed a programmable processing pipeline. Its 320 I/O allow substantial interconnection with converters, memory devices, capture logic, and trigger systems, while the 19,224 logic cells support buffering, filtering, interpolation, and protocol conversion. The device can implement DSP functions alongside control logic, reducing the need for separate programmable components. The 1,028 MHz internal frequency should not be treated as the guaranteed rate of every external interface; actual throughput depends on I/O standards, clocking, pin placement, routing, and timing closure.
Disebarkan
Communications Packet Processing
The XC4VFX20-10FF672C can be used in communications equipment for programmable packet classification, framing, buffering, and traffic management. With 19,224 logic cells and 320 I/O, the FPGA can combine line-rate interface logic, table lookups, counters, and protocol engines while retaining parallel ports to DDR memory or a network processor. The 672-ball FCBGA offers the pin density needed for multiple buses and differential interfaces, but board designers must follow AMD’s package and high-speed layout guidance. Existing legacy equipment may use this part for maintenance continuity; new network platforms should compare supported devices with integrated transceiver and security features.
Disebarkan
Test and Measurement Instrumentation
The XC4VFX20-10FF672C is a practical fit for modular laboratory instruments that combine precise timing, stimulus generation, measurement logic, and a host interface. Programmable logic can create clocks, counters, sequence engines, digital patterns, and analysis pipelines, while 320 I/O support synchronizing multiple converters and communication peripherals. Its 2,136 configurable logic blocks provide substantial parallelism for multichannel systems, and dedicated DSP resources can support filtering and modulation. Designers should separate sensitive analog functions from switching logic, use controlled clock distribution, and verify jitter and I/O timing through post-route static timing analysis before hardware release.
Disebarkan
Digital Signal Processing
The XC4VFX20-10FF672C supports digital signal-processing systems that benefit from programmable filters, correlation, waveform generation, and fixed-point arithmetic. Its large logic fabric can implement parallel datapaths and control code around dedicated DSP blocks, while the high I/O count connects it to ADCs, DACs, transceivers, and memory. A practical design should partition the algorithm into pipelined stages and use AMD timing constraints for every clock domain. Power and thermal results depend on actual multiplier use, switching activity, I/O activity, and the selected speed grade, so utilization reports and post-implementation power estimates should guide configuration.
Disebarkan
Legacy Equipment Maintenance
The XC4VFX20-10FF672C is especially relevant to maintenance programs that must reproduce an existing Virtex-4 FX board rather than redesign it. Its 19,224 logic cells, 320 I/O, and 672-ball FCBGA match the original platform, allowing a form-fit-and-function replacement strategy when the exact ordering option and temperature grade are confirmed. Engineers should compare the complete ordering code, package-ball file, configuration bitstream, and device identification before installation. Because the FPGA is obsolete, preserve the original project files, constraints, and archived tool versions so production replacements can be built with reproducible timing and configuration behavior.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk XC4VFX20-10FF672C — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | XC4VFX20-10FF672I | XC4VFX20-10FFG672C | XC4VFX20-10FF672CS1 | XC4VFX20-10FFG672CS1 | XC4VFX20-10FF672C-ND |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 672-ball FCBGA, 27 mm × 27 mm | 672-ball FCBGA, 27 mm × 27 mm | 672-ball FCBGA, 27 mm × 27 mm | 672-ball FCBGA, 27 mm × 27 mm | 672-ball FCBGA, 27 mm × 27 mm | 672-ball FCBGA, 27 mm × 27 mm |
| Logic Cells | 19,224 cells | 19,224 cells | 19,224 cells | 19,224 cells | 19,224 cells | 19,224 cells |
| Configurable Logic Blocks | 2,136 CLBs | 2,136 CLBs | 2,136 CLBs | 2,136 CLBs | 2,136 CLBs | 2,136 CLBs |
| User I/O | 320 I/O | 320 I/O | 320 I/O | 320 I/O | 320 I/O | 320 I/O |
| Maximum Internal Frequency | 1,028 MHz | 1,028 MHz | 1,028 MHz | 1,028 MHz | 1,028 MHz | 1,028 MHz |
| Nominal Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Temperature Grade | Commercial, 0°C to 85°C | Industrial ordering option | Commercial, 0°C to 85°C | Commercial ordering option | Commercial ordering option | Commercial ordering designation |
| Process Technology | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
Penyeberangsung Jelas
- Matches the complete XC4VFX20-10 resource profile (vsXC4VFX20-10FFG672C)
- Industrial-temperature ordering option exists in the same device family (vsXC4VFX20-10FF672C)
- High pin count supports parallel interfaces without a separate large companion FPGA (vsXC4VFX20-10FF672C-ND)
- Maintains the legacy Virtex-4 software and bitstream platform (vsModern cross-brand FPGA)
Catatan Desain
Assign the 672 package balls directly from AMD’s Virtex-4 package pinout files for the exact ordering code. A 1.00 mm-pitch FCBGA demands strict via, solder-mask, and pad geometry; use the manufacturer land pattern rather than extrapolating a generic BGA footprint. Keep configuration, clock, power, and decoupling assignments consistent with the schematic and validate them with design-rule and assembly checks before releasing the PCB.
Budget the 1.2 V core rail separately from every external I/O rail. The core range is 1.14 V to 1.26 V, but allowable ripple, sequencing, and current depend on the exact configuration and operating state. Use the AMD DC characteristics to size each regulator and place local high-frequency decoupling at the associated supply balls. Ground and power-plane geometry should minimize plane resistance because a large FPGA can produce rapid current transients.
Thermal design must use estimated power based on the final logic utilization, I/O activity, configuration state, and ambient temperature rather than a single nominal device-power value. Distribute heat through the FCBGA solder balls and multilayer PCB copper, account for the thermal resistance of the finished assembly, and verify junction temperature under worst-case operating conditions. Conductive cooling should be considered when the enclosure has limited airflow.
Do not treat the reported 1,028 MHz internal frequency as a guaranteed external interface rate. Achieve the required throughput through correct clock constraints, dedicated clock routing, legal I/O placement, suitable I/O standards, and post-route timing analysis. Also verify the configuration memory, startup sequence, bitstream compatibility, and obsolete-toolchain availability. Small ordering-code differences can change the temperature or package designation even when the FPGA resources appear identical.
Maklumat Kesediaan
The commercial XC4VFX20-10FF672C ordering option is not identified as an AEC-Q100-qualified automotive device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not identified in the product information.