XC4VLX25-10FFG668C - 24,192-Cell Virtex-4 LX FPGA | AMD
MPN: XC4VLX25-10FFG668C ✓ AktifXC4VLX25-10FFG668C Ringkasan
An FPGA is a programmable semiconductor whose configurable logic, interconnect, memory, and I/O resources implement digital systems that would otherwise require multiple discrete devices. The Virtex-4 LX FPGA family is positioned within the broader hierarchy of programmable logic devices, combining configurable logic blocks with embedded block RAM, programmable input/output resources, dedicated clock and routing networks, and high-speed serial connectivity. This makes the device suitable for communication, control, processing, and interface-intensive systems.
Key resources include 24,192 logic cells organized into 2,688 logic blocks, 1,327,104 bits of total RAM, and 448 I/O. The listed internal frequency is 1,028 MHz, while the -10 suffix identifies the device speed grade. The package is a 668-pin FCBGA measuring 27 mm by 27 mm according to the product listing, and the device uses a 1.2 V supply in the manufacturer’s family description. The lead-free G finish supports RoHS-oriented manufacturing, while the C suffix denotes the commercial temperature range.
Technically, the XC4VLX25-10FFG668C integrates programmable CLBs, distributed and block RAM, dedicated DSP resources, clock management, and SelectIO structures into one device. This resource mix allows parallel datapaths, protocol bridging, buffering, and control logic to be consolidated on a single FPGA. Designers must still constrain each design for its target clock, I/O standards, memory interfaces, and physical implementation using the supported AMD/Xilinx design environment.
Typical applications include industrial networking, telecommunications equipment, embedded control, test and measurement, signal processing, and high-speed data acquisition. Its 448 I/O and 1.327 Mbit of block RAM provide substantial integration capacity, while the Virtex-4 LX fabric supports parallel processing and clocked digital architectures. Industrial control systems can also use the FPGA for deterministic acquisition, protocol conversion, and supervisory logic.
A critical design consideration is package-level signal integrity. The 668-pin FCBGA requires a controlled multilayer PCB stack-up, exact escape routing, power and ground-plane distribution, and careful decoupling. Differential and high-speed interfaces must be routed according to the family datasheet and device pinout files. Because this is a large pin-count BGA, assembly inspection, via-in-pad strategy, thermal management, and connector or heatsink placement can materially affect system reliability.
This page combines the verified device specifications, resource comparisons, same-package replacement guidance, and practical implementation notes to help engineers evaluate the XC4VLX25-10FFG668C for legacy Virtex-4 LX designs. AMD identifies fully compatible replacements as other XC4VLX25 devices using the same package with a different speed or temperature grade.
Pilihan pengganti yang segera untuk XC4VLX25-10FFG668C — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera XC4VLX25-10FFG668C (sama faktor bentuk dan kaki) — berbeza dalam Device Type, Operating Temperature, Package Type, Speed Grade, Package.
XC4VLX25-10FFG668I
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →XC4VLX25-11FFG668C
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →XC4VLX25-10FF668C
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →XC4VLX25-11FFG668I
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak DisahkanHubungi untuk harga
Lihat Datasheet →XC4VLX25-12FFG668C
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak DisahkanHubungi untuk harga
Lihat Datasheet →XC4VLX25-10FFG668C Penilaian maksimum & Ciri-ciri Elektrik
| Device Type | Virtex-4 LX Field Programmable Gate Array |
| Logic Cells | 24,192 cells |
| Logic Blocks | 2,688 CLBs |
| Total Block RAM | 1,327,104 bits |
| User I/O | 448 I/O |
| Internal Frequency | 1,028 MHz |
| Technology | 90 nm CMOS |
| Speed Grade | -10 |
| Kemasan | 668-pin FCBGA, 27 mm x 27 mm |
| Jenis Pemasangan | Surface Mount |
| Suhu Operasi | 0°C to 85°C |
| Nominal Supply Voltage | 1.2 V |
| Lead-Free Finish | Lead-free G finish |
| Status RoHS | Compliant |
| Product Lifecycle Status | Active |
Panduan Konfigurasi Pin XC4VLX25-10FFG668C 668-pin fcbga, 27 mm x 27 mm
Konfigurasi pin untuk XC4VLX25-10FFG668C (668-pin fcbga, 27 mm x 27 mm pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk XC4VLX25-10FFG668C.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
XC4VLX25-10FFG668C patut untuk 6 aplikasis: Industrial Networking Gateways, Telecommunications Data Conversion, Embedded Industrial Control, High-Speed Data Acquisition, Test and Measurement Equipment, Video and Display Processing.
Industrial Networking Gateways
The XC4VLX25-10FFG668C fits industrial Ethernet gateways, protocol bridges, and multiport communication controllers because it combines 24,192 logic cells with 448 programmable I/O. Engineers can place packet buffering, framing logic, command processing, and multiple interface bridges in one FPGA rather than dividing them among processors and supporting logic. Its 1,327,104 bits of block RAM provide dedicated capacity for packet queues and data paths, while the -10 grade targets a predictable cost-performance balance. The commercial 0°C to 85°C range suits temperature-controlled cabinets. Implementation must preserve adequate drive strength and timing margin on industrial interfaces, and the 668-pin FCBGA requires careful decoupling and controlled-length routing.
Disebarkan
Telecommunications Data Conversion
The XC4VLX25-10FFG668C is suitable for telecommunications line-card adaptation, parallel-to-serial conversion, framing, and channel aggregation. Its 448 I/O support parallel fabric interfaces and clocked data buses, while the programmable logic can implement lane alignment, elastic buffering, and protocol-specific state machines. The 1.327 Mbit of block RAM can hold packet descriptors or capture windows without off-chip memory in modest designs. A -10 speed grade provides a conservative Virtex-4 LX implementation target for established 90 nm designs. Designers should use the manufacturer timing constraints for each supported clock and verify pin assignments through AMD’s Virtex-4 package pinout resources before routing the 668-pin FCBGA.
Disebarkan
Embedded Industrial Control
The XC4VLX25-10FFG668C can consolidate deterministic machine-control logic, sensor conditioning, actuator sequencing, and communication handling in industrial equipment. Its 2,688 logic blocks provide parallel implementation capacity for control loops and state machines, while 448 I/O reduce the number of external interface devices required. The commercial operating range of 0°C to 85°C works for enclosed factory equipment, provided the controller maintains thermal headroom. Firmware updates can be implemented through programmable configuration resources rather than fixed logic. In practice, designers must partition real-time logic carefully, constrain all clocks, reserve configuration pins, and validate the final timing against the -10 device characteristics rather than relying on nominal logic-cell counts.
Disebarkan
High-Speed Data Acquisition
The XC4VLX25-10FFG668C is appropriate for multichannel acquisition, waveform generation, and real-time filtering systems that need parallel sampling and deterministic data movement. Its 448 I/O can connect multiple converters or parallel buses, while 24,192 logic cells support parallel filters, counters, trigger logic, and packet assembly. The 1,327,104 bits of block RAM provide local buffering for captured samples and can be combined with external memory for deeper traces. The listed 1,028 MHz internal frequency describes the device family resource rather than a guaranteed user-clock rate, so the actual sampling and processing rates must be established through device-specific timing analysis. PCB implementation should use controlled impedance, solid return planes, and short analog-to-digital interface paths.
Disebarkan
Test and Measurement Equipment
The XC4VLX25-10FFG668C fits instrument-control and pattern-generation systems that combine parallel I/O, timing logic, and embedded storage. Logic cells can implement sequencers, digital filters, and measurement algorithms, while 448 I/O expose buses, triggers, and control signals to external test equipment. The available block RAM supports calibration tables, stimulus patterns, and intermediate processing buffers without requiring a separate memory controller for smaller data sets. The -10 grade and 0°C to 85°C range are appropriate for laboratory and production-test environments where conditions remain controlled. Signal-integrity work remains essential: use the family constraints and official package assignment files, maintain uninterrupted ground references, and terminate high-speed interfaces according to the manufacturer recommendations.
Disebarkan
Video and Display Processing
The XC4VLX25-10FFG668C can support parallel pixel processing, timing generation, scaler control, and multi-screen interface logic in professional display and broadcast equipment. Its 448 I/O are valuable for parallel LVDS or digital video interfaces, while the 24,192-cell fabric allows frame buffers, color conversion, and synchronization pipelines to be implemented in programmable logic. The 1.327 Mbit of block RAM can serve line buffers, lookup tables, or compact frame-storage functions, although full high-resolution frame storage generally requires external memory. Because video timing is sensitive to skew and clock quality, PCB traces should be length-matched where required, clocks should use supported routing resources, and power delivery to the 668-pin FCBGA should maintain low impedance under switching load.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk XC4VLX25-10FFG668C — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | XC4VLX25-10FFG668I | XC4VLX25-11FFG668C | XC4VLX25-10FF668C | XC4VLX25-11FFG668I | XC4VLX25-12FFG668C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 668-FCBGA | 668-FCBGA - same | 668-FCBGA - same | 668-FCBGA - same | 668-FCBGA - same | 668-FCBGA - same |
| Speed Grade | -10 | -10 - same | -11 - faster | -10 - same | -11 - faster | -12 - faster |
| Operating Temperature | 0°C to 85°C | -40°C to 100°C | 0°C to 85°C | 0°C to 85°C | -40°C to 100°C | 0°C to 85°C |
| Logic Cells | 24,192 cells | 24,192 cells | 24,192 cells | 24,192 cells | 24,192 cells | 24,192 cells |
| Logic Blocks | 2,688 CLBs | 2,688 CLBs | 2,688 CLBs | 2,688 CLBs | 2,688 CLBs | 2,688 CLBs |
| Block RAM | 1,327,104 bits | 1,327,104 bits | 1,327,104 bits | 1,327,104 bits | 1,327,104 bits | 1,327,104 bits |
| User I/O | 448 I/O | 448 I/O | 448 I/O | 448 I/O | 448 I/O | 448 I/O |
| Internal Frequency | 1,028 MHz | 1,028 MHz | 1,028 MHz listed family value | 1,028 MHz | 1,028 MHz listed family value | 1,028 MHz listed family value |
| Technology | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS |
Penyeberangsung Jelas
- Commercial-temperature target with same-package industrial option (vsXC4VLX25-10FFG668I)
- Direct timing-grade upgrade path (vsXC4VLX25-11FFG668C)
- Highest listed speed-grade option in the same footprint (vsXC4VLX25-12FFG668C)
- Large integration capacity for parallel control and data paths (vsXC4VLX25-10FF668C)
Catatan Desain
Treat the 668-pin FCBGA as a high-pin-count escape-routing problem. Use a manufacturer-referenced PCB stack-up, maintain continuous ground planes, and route power and ground connections through the shortest practical paths. Confirm ball assignments with the official Virtex-4 package pinout file rather than copying a pin map from another XC4VLX25 package. Prototype assembly should include the appropriate via and land-pattern geometry for the selected fabrication and assembly process.
Decouple each supply domain close to the package power balls and provide local bulk energy storage for transient load steps. The core supply is listed as 1.2 V, while I/O and auxiliary supply requirements must be taken directly from the manufacturer datasheet. Validate the complete power tree under maximum intended switching activity, and avoid sharing narrow supply paths among the FPGA, external memory, and high-speed transceivers when those loads can pull the rail dynamically.
The operating temperature range is 0°C to 85°C, but package dissipation depends on design utilization, clock activity, I/O loading, and board heat removal. Place the device where the 27 mm by 27 mm package can spread heat into internal planes and, when necessary, add a heat spreader or heatsink. Validate the assembled system at worst-case ambient temperature and realistic switching activity rather than relying on a nominal device rating.
Use the official package pinout and Virtex-4 design guidance when assigning clock, configuration, and high-speed interface balls. Route clocks through supported clock resources, maintain a continuous reference plane, and apply length matching where the selected interface requires it. Treat the 448 I/O as a mixed-signal and signal-integrity design problem because external standards, edge rates, loading, and board-level return paths can alter timing and noise margins.
Do not substitute a different package or logic density merely because its pin count appears similar. AMD states that fully compatible replacements are XC4VLX25 devices in the same package with an appropriate speed or temperature grade. After changing from -10 to -11 or -12, rerun static timing analysis, verify the configuration bitstream and operating limits, and revalidate power and system timing. An industrial-temperature alternative is required when the enclosure can fall below 0°C.
Maklumat Kesediaan
The Mouser product listing identifies the G-finish device as Pb-free, and a same-family product listing describes the lead-free finish as RoHS compliant. REACH, halogen-free, and conflict-minerals status are not confirmed.