XC7A12T-L1CSG325I - 12.8K Cell Artix-7 FPGA | AMD
MPN: XC7A12T-L1CSG325I ✓ AktifXC7A12T-L1CSG325I Ringkasan
An FPGA is a semiconductor device whose digital logic and interconnect can be configured after manufacture. The Artix-7 family occupies the hierarchy between general-purpose programmable logic and higher-end FPGA products, supporting parallel processing, interface bridging, control, and signal-processing functions without requiring a separately fabricated ASIC. This makes an Artix-7 FPGA useful when design requirements are evolving faster than a mask set can be revised.
Key device attributes include 12,800 logic cells, 150 available I/O locations, 28 nm fabrication technology, and a 1 V operating core voltage identified for the closely related XC7A12T-1CSG325I ordering information. The device also provides programmable logic blocks, dedicated digital signal processing resources, and block RAM for control logic, data acquisition, communication, and embedded image-processing applications. Its BGA package supports compact, high-density PCB layouts.
The Artix-7 architecture provides configurable logic, programmable interconnect, embedded memory, DSP resources, and integrated memory and I/O capabilities within one programmable device. This integration allows multiple fixed-function components to be consolidated into a single FPGA implementation. Configuration loading, clocking, power sequencing, and bank-specific voltage requirements must still be handled by the surrounding board and programming system.
Typical applications include industrial automation, sensor and test systems, embedded control, communications infrastructure, instrumentation, and compact edge-processing equipment. The 150-I/O interface is particularly useful for systems combining external memory, serial links, control signals, and high-speed data paths. The 12.8K-cell density is appropriate for moderate-complexity parallel processing where a larger FPGA would add unnecessary cost, size, and power.
Board design requires careful BGA fanout, power-plane planning, decoupling, and thermal management. The 324-CSBGA footprint should be implemented according to the AMD Artix-7 package files and pinout resources, while every power, ground, configuration, clock, and I/O connection should be checked against the exact ordering code before layout release.
This page organizes the device specifications, verified source links, practical design considerations, application guidance, and same-footprint ordering alternatives for engineers evaluating the XC7A12T-L1CSG325I. It also highlights the need to verify speed grade, temperature grade, package revisions, and lifecycle status against the manufacturer ordering guide before production release.
Pilihan pengganti yang segera untuk XC7A12T-L1CSG325I — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera XC7A12T-L1CSG325I (sama faktor bentuk dan kaki) — berbeza dalam Package, Device Type, Process Technology, Performance Grade, User I/O.
XC7A12T-1CSG325I
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →XC7A12T-2CSG325I
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →XC7A12T-3CSG325I
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
XC7A12T-1CSG325C
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak DisahkanHubungi untuk harga
Lihat Datasheet →XC7A12T-2CSG325C
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
XC7A12T-L1CSG325I Penilaian maksimum & Ciri-ciri Elektrik
| Device Type | Artix-7 field-programmable gate array (FPGA) |
| Logic Cells | 12,800 cells |
| User I/O | 150 I/O |
| Process Technology | 28 nm |
| Core Supply Voltage | 1 V |
| Kemasan | 324-CSBGA, 324-LFBGA |
| Kiraan Pin | 324 pins |
| Device Type Code | 1 |
| Jenis Pemasangan | Surface mount |
| Packaging Type | Tray |
Panduan Konfigurasi Pin XC7A12T-L1CSG325I 324-csbga, 324-lfbga
Konfigurasi pin untuk XC7A12T-L1CSG325I (324-csbga, 324-lfbga pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk XC7A12T-L1CSG325I.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
XC7A12T-L1CSG325I patut untuk 6 aplikasis: Industrial Automation Controller, Sensor and Signal Acquisition, Programmable Logic Instrumentation, Communications Interface Bridge, Motor Control and Power Electronics, Embedded Edge Processing.
Industrial Automation Controller
The XC7A12T-L1CSG325I fits compact automation controllers that coordinate sensors, motor-control signals, interlocks, communications, and local diagnostics. Its 12,800 logic cells provide moderate parallel capacity, while 150 I/O sites support digital control, status indication, and multiple peripheral interfaces. Place the FPGA between field-level circuitry and an embedded processor to offload timing-critical sequencing, protocol conversion, and signal conditioning. The 1 V core simplifies low-voltage digital power distribution, but all I/O rails must follow the exact device and package tables. PCB design should reserve continuous ground planes, local core and I/O decoupling, and clean clock routing.
Disebarkan
Sensor and Signal Acquisition
The XC7A12T-L1CSG325I is useful in sensor-acquisition systems that must combine parallel sampling, digital filtering, calibration logic, and data packing before transferring results to a processor. The Artix-7 fabric can implement parallel-to-serial conversion, trigger coordination, counters, and programmable timing while dedicated DSP resources support fixed-point filtering operations. With 150 I/O sites, the device can connect several converters, clocks, and digital sensors without moving every function into software. Designers should use the AMD package pinout files to assign high-speed I/O and preserve clock integrity, and should evaluate the exact block RAM and DSP totals against the required channel count.
Disebarkan
Programmable Logic Instrumentation
The XC7A12T-L1CSG325I can implement programmable counters, timing engines, pattern generators, and capture logic in laboratory or production-test instruments. Its 12,800 logic cells allow several channels of test sequencing and measurement control to share one device, while 150 I/O sites provide connections to stimulus and response circuitry. The FPGA can operate beside an embedded processor, with hard real-time functions handled in programmable logic and supervisory tasks handled in software. Timing closure depends on the selected speed grade, so the exact ordering code must be used during implementation. Layout should isolate sensitive measurement paths from switching nodes and provide independent filtering for analog and digital supply domains.
Disebarkan
Communications Interface Bridge
The XC7A12T-L1CSG325I is appropriate for protocol conversion, packet formatting, FIFO management, and interface bridging in compact communications equipment. Its programmable logic can translate between bus formats, maintain timing relationships, and absorb short traffic bursts without relying entirely on a processor. The 150-I/O capacity supports external memory and multiple control interfaces, while the 12,800-cell density is sufficient for moderate protocol engines. Engineers should budget clocking resources and route high-speed serial or parallel interfaces according to bank constraints. Configuration pins, serial transceiver interface pins, and dedicated clock-capable pins must be assigned using the official 324-CSBGA package file.
Disebarkan
Motor Control and Power Electronics
The XC7A12T-L1CSG325I can coordinate deterministic control functions for motor drives, power converters, and power-supply monitoring systems. It can generate pulse timing, process position or current feedback, and supervise interlocks while an embedded controller manages higher-level commands. The 1 V core and integrated programmable logic support low-voltage control domains, but gate-drive signals and analog feedback remain separate external circuits. Design work should include input synchronization, protection behavior during configuration loss, and deterministic shutdown paths. Isolation, creepage, and ground separation must be designed according to the power-stage requirements rather than inferred from FPGA logic timing.
Disebarkan
Embedded Edge Processing
The XC7A12T-L1CSG325I is suitable for compact edge nodes that preprocess sensor data, reduce bandwidth, or execute deterministic filtering before forwarding results over a network. Its 12,800 logic cells and DSP resources allow selected computations to run concurrently, while programmable I/O interfaces connect directly to sensors and communication devices. This architecture can reduce processor interrupts and improve deterministic response compared with performing every operation in software. The FPGA's resource limits should be checked using the complete design, including routing overhead, and the selected speed grade must satisfy interface timing. Board-level power integrity and thermal design should account for simultaneous activity across the core, I/O banks, and external regulators.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk XC7A12T-L1CSG325I — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | XC7A12T-1CSG325I | XC7A12T-2CSG325I | XC7A12T-3CSG325I | XC7A12T-1CSG325C | XC7A12T-2CSG325C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 324-CSBGA | 324-CSBGA | 324-CSBGA | 324-CSBGA | 324-CSBGA | 324-CSBGA |
| FPGA Family | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 |
| Logic Cells | 12,800 cells | 12,800 cells | 12,800 cells | 12,800 cells | 12,800 cells | 12,800 cells |
| User I/O | 150 I/O | 150 I/O | 150 I/O | 150 I/O | 150 I/O | 150 I/O |
| Process Technology | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm |
| Core Supply Voltage | 1 V | 1 V | 1 V | 1 V | 1 V | 1 V |
| Speed Grade | L1 ordering designation | Grade 1 | Grade 2 | Grade 3 | Grade 1 | Grade 2 |
Penyeberangsung Jelas
- Matches the 12,800-cell Artix-7 implementation while offering multiple ordering-grade choices (vsXC7A12T-2CSG325I)
- Provides an industrial-grade same-footprint option for extended-temperature designs (vsXC7A12T-1CSG325C)
- Offers grade flexibility without changing the device density (vsXC7A12T-3CSG325I)
Catatan Desain
Implement the 324-CSBGA land pattern from the official AMD package drawing and use the Artix-7 package pinout file for every ball assignment. Separate core, I/O, and auxiliary supplies into appropriately filtered power regions, place decoupling capacitors at the relevant supply pins, and avoid routing fast signals through the BGA power-and-ground array where unnecessary. Verify the assembled PCB with the package drawing and stackup-specific assembly rules before fabrication.
Create a complete power budget that includes the 1 V core rail, every enabled I/O bank, configuration current, and regulator losses. Because FPGA activity varies with logic utilization and switching rate, evaluate both typical and worst-case states rather than sizing the supply from idle current alone. Enable and sequence the rails according to the device configuration requirements, and retain a controlled path for deasserting configuration and driving outputs into a safe state during power loss.
Provide uninterrupted copper for the BGA ground balls and place thermal vias where the package and PCB construction permit. Estimate junction temperature from total device dissipation, package thermal characteristics, board construction, and ambient conditions, then apply an appropriate safety margin to the selected grade's maximum junction temperature. Move logic to a smaller Artix-7 device or reduce clock and I/O activity if the thermal analysis shows insufficient margin.
Route clock-capable pins to low-noise clock sources and keep configuration, serial programming, and JTAG signals away from high-swinging interfaces. Use source-synchronous or board-level timing constraints appropriate to each bank, account for package and PCB delay, and avoid via transitions that degrade edge quality. Confirm each I/O standard and voltage against the exact bank power plan before assigning pins.
Maklumat Kesediaan
The exact ordering code must be checked against the manufacturer compliance and product-qualification records before release.