XC7A15T-L2CSG324E - 16,640-LC Artix-7 FPGA | AMD
MPN: XC7A15T-L2CSG324E ✓ AktifXC7A15T-L2CSG324E Ringkasan
An FPGA is a programmable logic device that combines configurable logic blocks, programmable I/O, memory resources and digital signal processing into one semiconductor. The Artix-7 family belongs to the FPGA and CPLD hierarchy within programmable logic devices. It targets designs requiring more parallel processing capability than a microcontroller while avoiding the power, complexity and cost of a larger FPGA platform.
Key resources include 1,300 configurable logic blocks, 16,640 logic cells, 210 DSP slices and 921,600 bits of block RAM. The -2 speed grade supports performance-oriented designs, while the CSG324 package provides 210 I/O positions in a compact 15 x 15 mm, 0.8 mm-pitch ball-grid-array format. The device supports JTAG programming and is identified by AMD as the XC7A15T member of the Artix-7 family.
The 28 nm architecture supports an energy-efficient balance between configurable logic, dedicated DSP and block RAM. For parallel datapaths, the 210 DSP slices can accelerate fixed-point operations without consuming general-purpose logic. The 921,600-bit block RAM provides dedicated storage for buffering, packet processing and control-plane data, while 16,640 logic cells implement state machines, interfaces and supervisory logic.
Typical uses include industrial control, network packet processing, embedded vision, instrumentation and communications equipment. The same part can serve as a compact prototyping platform for parallel algorithms, as a final compact control-logic device in production equipment, or as a bridge between high-speed serial links and parallel processing blocks. Its compact BGA package requires careful PCB layout and thermal validation.
When assigning pins, use the CSG324 package files referenced by AMD UG475 rather than relying on a generic symbol. Confirm the power rails, decoupling, configuration interface and bank-specific I/O voltage limits against the XC7A15T datasheet. BGA assembly also requires appropriate stencil, via-in-pad, solder-paste and X-ray inspection practices.
This page combines the exact device identity, verified resource counts, package details, same-footprint family alternatives and practical migration guidance. It highlights the distinctions between speed and temperature-grade suffixes so engineers can choose a replacement without assuming that every CSG324 Artix-7 ordering code has identical qualification requirements.
Pilihan pengganti yang segera untuk XC7A15T-L2CSG324E — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera XC7A15T-L2CSG324E (sama faktor bentuk dan kaki) — berbeza dalam Mounting Type, Package, Block RAM, Logic Cells, DSP Slices.
XC7A15T-1CSG324I
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →XC7A15T-1CSG324E
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
XC7A15T-1CSG324C
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →XC7A15T-2CSG324C
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
XC7A15T-2CSG324I
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
XC7A15T-L2CSG324E Penilaian maksimum & Ciri-ciri Elektrik
| Device Type | Artix-7 field-programmable gate array (FPGA) |
| Logic Cells | 16,640 cells |
| Configurable Logic Blocks | 1,300 CLBs |
| DSP Slices | 210 slices |
| Block RAM | 921,600 bits |
| Process Technology | 28 nm |
| Nominal Core Voltage | 1.0 V |
| Maximum I/O Voltage | 3.465 V |
| Maximum Stated Frequency | 200 MHz |
| Speed Grade | -2 |
| Suhu Operasi | 0 °C to 100 °C |
| Kemasan | 324-terminal CSPBGA, 15 x 15 mm |
| Ball Pitch | 0.8 mm |
| Terminal Count | 324 balls |
| I/O Count | 210 I/O positions |
| Programming Interface | JTAG |
| Jenis Pemasangan | Surface-mount ball-grid array |
| Power Supply Class | Low-power FPGA |
| Status RoHS | RoHS |
| Pinout Reference | AMD Artix-7 package device pinout files |
Panduan Konfigurasi Pin XC7A15T-L2CSG324E 324-terminal cspbga, 15 x 15 mm
Konfigurasi pin untuk XC7A15T-L2CSG324E (324-terminal cspbga, 15 x 15 mm pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk XC7A15T-L2CSG324E.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
XC7A15T-L2CSG324E patut untuk 6 aplikasis: Industrial Control Systems, Network Packet Processing, Machine Vision Preprocessing, Embedded Instrumentation, Communications Infrastructure, Aerospace Test Equipment.
Industrial Control Systems
The XC7A15T-L2CSG324E fits compact industrial controllers that combine deterministic parallel logic with data acquisition and communications. Its 16,640 logic cells can implement multiple state machines, interlocks and protocol engines, while 210 DSP slices support signal conditioning, filtering and motion-control arithmetic. The 921,600 bits of block RAM can hold capture buffers or protocol queues without consuming general-purpose logic. Place the device beside precision converters and isolated communication transceivers, then use the CSG324 pin files to assign voltage-sensitive banks and the JTAG pins.
Disebarkan
Network Packet Processing
The XC7A15T-L2CSG324E is suitable for line-rate packet classification, filtering and buffering when a compact implementation is preferred over a larger network FPGA. Its 210 DSP slices can support parallel arithmetic used in header inspection, counters and traffic shaping, while 921,600 bits of block RAM provide packet storage. The 16,640 logic cells can host interfaces, finite-state machines and control logic. A practical design places serial transceiver outputs near the FPGA and uses clocking resources with controlled return paths to minimize deterministic timing and signal-integrity risk.
Disebarkan
Machine Vision Preprocessing
The XC7A15T-L2CSG324E can perform preprocessing between an image sensor and a higher-level processor by executing parallel pixel and block operations. Its 210 DSP slices are useful for multiply-accumulate operations associated with filtering, correlation and color conversion, while block RAM provides line buffers and working storage. The device also offers enough general logic for image acquisition control, counters and data formatting. Keep sensor and interface signals on dedicated banks, follow the AMD CSG324 ball map and validate timing with the intended image rate rather than relying only on the device's stated 200 MHz maximum frequency.
Disebarkan
Embedded Instrumentation
The XC7A15T-L2CSG324E supports embedded measurement systems that combine trigger sequencing, data capture, digital correction and a host interface. Block RAM can implement sample and trace buffers, while DSP slices accelerate scaling and filtering, and the programmable logic fabric manages timing-sensitive trigger paths. The compact 324-terminal CSPBGA package fits instrumentation where fewer external components and a small board area are important. For production hardware, use the AMD package files to define the configuration pins, power planes and decoupling, and measure junction and board temperatures across the required operating range.
Disebarkan
Communications Infrastructure
The XC7A15T-L2CSG324E can be used in communications infrastructure for aggregation, protocol conversion, clock recovery support and supervisory logic. Its dedicated DSP resources allow parallel filtering or modulation computations, while block RAM supports framed-data buffering and the logic fabric connects streaming interfaces. The -2 speed grade provides additional timing margin relative to -1 options when clocks are constrained. Place the FPGA next to the high-speed transceiver circuitry, preserve controlled clocking and differential routing geometry, and verify every I/O bank against its assigned voltage in the final board schematic.
Disebarkan
Aerospace Test Equipment
The XC7A15T-L2CSG324E can serve as programmable logic in compact aerospace test and monitoring equipment where parallel data reduction, pattern generation and status acquisition are required. The 210 DSP slices support arithmetic-heavy preprocessing, the 921,600-bit block memory accommodates working buffers, and the 16,640 logic cells implement sequencers and communication protocols. Its listed 0 °C to 100 °C range may suit many ground-support environments, but the complete system qualification determines whether the ordering code is acceptable. Use the package-device files for a reliable footprint and retain configuration access for diagnostics and field updates.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk XC7A15T-L2CSG324E — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | XC7A15T-1CSG324I | XC7A15T-1CSG324E | XC7A15T-1CSG324C | XC7A15T-2CSG324C | XC7A15T-2CSG324I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 324-terminal CSPBGA | 324-terminal CSPBGA | 324-terminal CSPBGA | 324-terminal CSPBGA | 324-terminal CSPBGA | 324-terminal CSPBGA |
| Speed Grade | -2 | -1 | -1 | -1 | -2 | -2 |
| Temperature Designation | E | I | E | C | C | I |
| Logic Cells | 16,640 cells | 16,640 cells | 16,640 cells | 16,640 cells | 16,640 cells | 16,640 cells |
| Configurable Logic Blocks | 1,300 CLBs | 1,300 CLBs | 1,300 CLBs | 1,300 CLBs | 1,300 CLBs | 1,300 CLBs |
| DSP Slices | 210 slices | 210 slices | 210 slices | 210 slices | 210 slices | 210 slices |
| Block RAM | 921,600 bits | 921,600 bits | 921,600 bits | 921,600 bits | 921,600 bits | 921,600 bits |
| Nominal Core Voltage | 1.0 V | 1.0 V | 1.0 V | 1.0 V | 1.0 V | 1.0 V |
Penyeberangsung Jelas
- Higher speed grade than the -1 alternatives (vsXC7A15T-1CSG324I)
- Retains the target temperature designation (vsXC7A15T-1CSG324C)
- Same -2 speed class with a different temperature designation (vsXC7A15T-2CSG324C)
- Preserves the full Artix-7 resource set (vsXC7A15T-1CSG324E)
Catatan Desain
Use the official AMD CSG324 package-device files as the authority for the 324-ball map, power pins, configuration pins and bank assignments. The 0.8 mm ball pitch requires a fine-pitch BGA land pattern and careful escape routing from the inner ball area. Preserve all required power and ground balls, avoid placing test or design changes beneath the package unless assembly and rework processes permit them, and independently check the PCB footprint against the latest package drawing.
Assign the core, auxiliary and user-I/O supplies according to the AMD XC7A15T datasheet and the selected CSG324 bank voltages. Decoupling must follow the recommended capacitance, voltage rating and placement for every supply ball. Because multiple balls can carry the same rail, fan out power and ground connections before layer transitions; incomplete plane connectivity or long series inductance can undermine the low-noise behavior expected from the Artix-7 architecture.
Estimate power from the final design utilization, clock activity and I/O toggling rather than using a generic FPGA power figure. The 15 x 15 mm CSPBGA has limited thermal area, so expose the package underside to a continuous ground plane and use thermal vias where the package and assembly process permit. Validate the assembled board at the highest expected ambient temperature and highest designed utilization, then increase copper area or airflow if junction-temperature margin is inadequate.
Route high-speed clocks and serial interfaces with continuous reference planes and avoid split-plane crossings. Match external transceiver data rates, package-bounce behavior and connector loss to the selected I/O standard before assigning banks. The stated 200 MHz frequency is not a guarantee for every interface or pin location; timing closure depends on the actual clocking architecture, pin placement, external components and board-level parasitics.
Do not treat every XC7A15T CSG324 ordering code as an unconditional drop-in substitute. A speed-grade change from -2 to -1 can invalidate timing closure, while a temperature-designation change can alter environmental suitability. Before substitution, compare the complete ordering codes, rerun synthesis and implementation, review new timing reports, confirm configuration compatibility and verify the thermal and operating-temperature requirements in the end product.
Maklumat Kesediaan
The component listing identifies the XC7A15T-L2CSG324E as RoHS. No additional REACH, halogen-free, lead-free or conflict-minerals declarations were identified for the exact MPN.