XC7Z020-3CLG484E - 866MHz Dual Cortex-A9 Zynq SoC | AMD
MPN: XC7Z020-3CLG484E ✓ AktifXC7Z020-3CLG484E Ringkasan
A Zynq system-on-chip integrates programmable logic and a microprocessor into one device. The ARM processing subsystem handles operating systems, networking, control functions, and software applications, while the FPGA fabric accelerates parallel processing, signal processing, interfaces, and custom hardware functions. This integration reduces the component count and inter-device communication requirements of a separate processor-plus-FPGA implementation.
Key features include two ARM Cortex-A9 processor cores operating at 866 MHz, CoreSight debug support, 85K FPGA logic cells, and a 484-CSPBGA package. The 19 x 19 mm package supports dense integration on complex embedded boards. The specified -3 speed grade, industrial temperature range, and extended ordering suffix identify the device for designs operating from 0°C to +100°C.
The architecture permits software-controlled FPGA configuration through the Zynq processing subsystem. Engineers can place datapaths, video pipelines, protocol interfaces, or other time-critical functions in programmable logic while running higher-level applications on the processor. CoreSight provides integrated visibility for debugging the complete hardware-software system, which can shorten fault isolation compared with a discrete implementation.
Typical uses include industrial IoT controllers, embedded vision systems, industrial automation, network equipment, and connected embedded products. The FPGA fabric is particularly useful when parallel data paths, deterministic interface behavior, or custom hardware acceleration must coexist with an embedded processor and its software ecosystem.
PCB design should follow the AMD CLG484 package, pinout, and power-supply guidance. Differential pairs, high-speed memory connections, power rails, decoupling, and exposed thermal-management requirements must be reviewed together because BGA assembly can require specialized inspection and rework capability.
This product page combines the verified device characteristics, speed- and temperature-grade alternatives, application guidance, package considerations, and structured engineering comparisons to support design selection and procurement planning.
Pilihan pengganti yang segera untuk XC7Z020-3CLG484E — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera XC7Z020-3CLG484E (sama faktor bentuk dan kaki) — berbeza dalam Mounting Type, Package, Logic Cells, Speed Grade, FPGA Family.
XC7Z020-2CLG484I
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan✗ Stok Habis
$49 / Unit
Lihat Datasheet →XC7Z020-1CLG484I
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan✓ Ada di Stok
$45.9375 / Unit
Lihat Datasheet →XC7Z020-2CLG484C
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
XC7Z020-1CLG484C
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak DisahkanHubungi untuk harga
Lihat Datasheet →XC7Z020-L1CLG484I
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
XC7Z020-3CLG484E Penilaian maksimum & Ciri-ciri Elektrik
| Product Type | Zynq-7000 FPGA system-on-chip |
| Processor Cores | 2 ARM Cortex-A9 cores |
| Processor Frequency | 866 MHz |
| FPGA Family | Artix-7 |
| Logic Cells | 85K logic cells |
| Debug Support | CoreSight |
| Processor Architecture | ARM Cortex-A9 MPCore |
| Kemasan | 484-CSPBGA |
| Package Dimensions | 19 x 19 mm |
| Gambaran Suhu Operasi | 0°C to +100°C |
| Speed Grade | -3 |
| Interface Resolution | 12-bit |
| Jenis Pemasangan | Surface-mount BGA |
Panduan Konfigurasi Pin XC7Z020-3CLG484E 19 x 19 mm
Konfigurasi pin untuk XC7Z020-3CLG484E (19 x 19 mm pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk XC7Z020-3CLG484E.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
XC7Z020-3CLG484E patut untuk 6 aplikasis: Industrial IoT Gateways, Embedded Vision Systems, Industrial Automation Controllers, Network and Communications Equipment, Connected Sensor Hubs, Secure Embedded Processing Platforms.
Industrial IoT Gateways
The XC7Z020-3CLG484E suits industrial gateways that combine network-facing software with custom serial, protocol, or data-acquisition logic. Its dual Cortex-A9 cores operate at 866 MHz for operating-system and application processing, while the 85K-cell Artix-7 fabric can implement parallel data paths or peripheral bridging. The 0°C to +100°C operating range supports industrial environments. A practical implementation places the Zynq device beside Ethernet and transceiver circuitry, uses DDR memory for working storage, and assigns latency-sensitive packet handling to programmable logic. This division reduces external glue logic while preserving a programmable processor environment for updates and protocol management.
Disebarkan
Embedded Vision Systems
The XC7Z020-3CLG484E is appropriate for embedded vision systems requiring deterministic parallel processing beside a general-purpose processor. Image capture, pixel formatting, thresholding, and filtering can be placed in the 85K-logic-cell Artix-7 fabric, while the dual 866 MHz Cortex-A9 cores handle camera control, object-level processing, networking, and user interfaces. The integrated processor-plus-FPGA architecture shortens the path between sensor data and local decisions. Engineers should match external DDR bandwidth to the image format and frame rate, then validate timing for the selected sensor interface and image-processing pipeline.
Disebarkan
Industrial Automation Controllers
The XC7Z020-3CLG484E can consolidate machine-control software, fieldbus handling, and deterministic hardware logic in one programmable device. The Cortex-A9 subsystem at 866 MHz supports control tasks and communications, while programmable logic can implement timing-critical encoder processing, pulse counting, or custom I/O sequencing. Its 0°C to +100°C range is appropriate for industrial equipment, although enclosure temperature and airflow must be considered. A robust design also checks isolation, surge requirements, grounding, and the fail-safe behavior of outputs when the processor or FPGA configuration is unavailable.
Disebarkan
Network and Communications Equipment
The XC7Z020-3CLG484E is useful in network appliances that need flexible hardware alongside an embedded processor. The two Cortex-A9 cores can run control-plane software at 866 MHz, and the FPGA fabric can accelerate packet classification, interface conversion, buffering, or custom protocols. This architecture is useful when a fixed-function interface is insufficient but a separate microcontroller would add unnecessary board area. For production networking equipment, validate clock-jitter requirements, external memory topology, transceiver impedance, and electromagnetic compatibility at the complete product level rather than relying only on device-level specifications.
Disebarkan
Connected Sensor Hubs
The XC7Z020-3CLG484E supports connected sensor hubs that aggregate measurements, perform local processing, and communicate results over industrial or network interfaces. The FPGA fabric can acquire or filter multiple sensor streams in parallel, while the dual Cortex-A9 cores manage configuration, calibration, diagnostics, and network protocols. The 866 MHz processor performance provides capacity for embedded software without requiring a separate host processor. For sensor-hub deployments, synchronize FPGA and processor clocks, define interrupt latency, and isolate analog front ends carefully because the programmable logic does not replace signal-conditioning or protection components.
Disebarkan
Secure Embedded Processing Platforms
The XC7Z020-3CLG484E can anchor an embedded platform that requires programmable hardware acceleration alongside a software processor. CoreSight-assisted processor debug helps inspect boot sequences, peripheral activity, and hardware-software interactions, while the FPGA fabric can isolate or accelerate selected functions. The 85K logic cells and dual Cortex-A9 cores provide a flexible architecture for gateways and control systems. Security still requires explicit implementation: use secure boot and key-management facilities supported by the selected platform, protect external memory interfaces, and avoid treating programmable logic as automatically trusted merely because it shares the package with the processor.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk XC7Z020-3CLG484E — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | XC7Z020-2CLG484I | XC7Z020-1CLG484I | XC7Z020-2CLG484C | XC7Z020-1CLG484C | XC7Z020-L1CLG484I |
|---|---|---|---|---|---|---|
| Package | 484-CSPBGA (19 x 19 mm) | 484-CSPBGA (19 x 19 mm) | 484-CSPBGA (19 x 19 mm) | 484-CSPBGA (19 x 19 mm) | 484-CSPBGA (19 x 19 mm) | 484-CSPBGA (19 x 19 mm) |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Processor | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore |
| FPGA Family | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 |
| Logic Cells | 85K logic cells | 85K logic cells | 85K logic cells | 85K logic cells | 85K logic cells | 85K logic cells |
| Speed Grade | -3 | -2 | -1 | -2 | -1 | -1 |
| Temperature Grade | I: 0°C to +100°C | I: 0°C to +100°C | I: 0°C to +100°C | C commercial grade | C commercial grade | I: 0°C to +100°C |
| Debug Support | CoreSight | CoreSight | CoreSight | CoreSight | CoreSight | CoreSight |
| Interface Resolution | 12-bit | 12-bit | 12-bit | 12-bit | 12-bit | 12-bit |
Penyeberangsung Jelas
- Combines an 866 MHz dual-core processor with 85K logic cells (vsXC7Z020-L1CLG484I)
- Maintains the full XC7Z020 programmable-logic resource set (vsXC7Z010 devices in CLG484)
- Uses the -3 industrial ordering combination (vsXC7Z020-2CLG484C)
Catatan Desain
Design the PCB around the AMD CLG484 package resources for the XC7Z020, not only the mechanical 19 x 19 mm outline. Assign every power, ground, processor, DDR, configuration, and programmable-logic signal according to the official package file. Preserve the distinction between MIO and PL pins, maintain the required ball-pad geometry, and account for via-in-pad, solder mask, and assembly requirements before schematic release.
Plan the Zynq power rails, sequencing, and decoupling from the AMD device power requirements before assigning external regulators. Separate processor and programmable-logic supplies according to the documented architecture, place bulk capacitance near the package supply entry points, and add local high-frequency decoupling at the relevant BGA balls. Validate startup, current transients, voltage tolerances, and rail ordering with the complete system load rather than a no-load condition.
Review DDR memory, configuration, clocks, and high-speed serial interfaces as one physical-design constraint set. Match trace lengths and impedances to the selected device and board stack-up, provide continuous reference planes where required, control skew across memory groups, and avoid splits or discontinuities beneath high-speed routes. Post-layout extraction and simulation should be repeated when stack-up, component placement, or memory topology changes.
Estimate worst-case junction temperature using the actual 866 MHz operating condition, selected I/O activity, board copper, airflow, and enclosure temperature. The BGA package depends on effective PCB heat spreading, so a small copper area or restrictive enclosure can raise junction temperature even when ambient temperature is acceptable. Validate with thermal simulation and, where appropriate, physical temperature testing under the highest expected processor, memory, and I/O load.
Maklumat Kesediaan
The manufacturer and distributor product information for this ordering code does not state the requested compliance classifications. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status from the current AMD documentation or a lot-specific supplier declaration before production release.