XC7Z045-2FFG676E - 350K Logic Cell Zynq-7000 SoC | AMD
MPN: XC7Z045-2FFG676E ✓ AktifXC7Z045-2FFG676E Ringkasan
A Zynq-7000 SoC is a programmable SoC that places a hard-processor subsystem and FPGA fabric in the same package. Unlike a conventional FPGA with an external microcontroller, the XC7Z045-2FFG676E allows software running on the ARM Cortex-A9 processor to communicate directly with programmable logic through dedicated interfaces. This architecture reduces system complexity and improves data-path performance for industrial, communications, embedded, and defense applications.
Key features include a dual ARM Cortex-A9 MPCore processor with CoreSight debug support, 350K Kintex-7 logic cells, 800 MHz processing capability, and a 676-ball FCBGA package. The device supports programmable-logic acceleration for image processing, control, networking, and protocol handling while the processor subsystem handles operating-system software, control functions, and application-level tasks.
The FPGA fabric provides flexible parallel processing resources, while the ARM subsystem handles sequential software workloads and supervisory control. Designers can partition an application between software and hardware, placing latency-sensitive or repetitive operations in programmable logic and reserving the processor for decision-making, data management, and external interfaces.
Typical applications include industrial automation, industrial Ethernet, motor control, video and image processing, communications infrastructure, test equipment, and embedded aerospace or defense systems. The 27 mm by 27 mm FCBGA package supports high-density PCB designs but requires careful escape routing, controlled impedance, thermal management, and reliable power delivery.
For a new design, use the AMD Zynq-7000 documentation for device configuration, memory interfaces, clocking, and package escape routing. When upgrading an existing board, confirm that the replacement retains the same package ballout and device configuration before substituting it in production hardware.
Pilihan pengganti yang segera untuk XC7Z045-2FFG676E — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera XC7Z045-2FFG676E (sama faktor bentuk dan kaki) — berbeza dalam Device Type, Architecture, Package, Package Type, Processor Core.
XC7Z045-2FFG676I
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →XC7Z045-L2FFG676I
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
XC7Z045-2FBG676E
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →XC7Z045-2FFG676E Penilaian maksimum & Ciri-ciri Elektrik
| Device Type | Zynq-7000 SoC |
| FPGA Family | Kintex-7 |
| Logic Cells | 350K |
| Processor | Dual ARM Cortex-A9 MPCore |
| Maximum Processor Frequency | 800 MHz |
| Architecture | ARM Cortex-A9 with CoreSight |
| Kemasan | 676-FCBGA (27x27) |
| Package Type | FCBGA |
| Package Dimensions | 27 mm x 27 mm |
| Number of Terminals | 676 |
| Terminal Form | Ball |
| Package Shape | Square |
| Terminal Position | Bottom |
| Technology | CMOS |
| Tegangan Pemberi Arus | 1.2 V / 3.3 V |
| Nominal Core Voltage | 1 V |
| Junction Temperature Range | 0 C to +100 C |
| Lead Time | 51 weeks |
| REACH Status | REACH Unaffected |
| HTSUS Code | 8542.39.0001 |
Panduan Konfigurasi Pin XC7Z045-2FFG676E square
Konfigurasi pin untuk XC7Z045-2FFG676E (square pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk XC7Z045-2FFG676E.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
XC7Z045-2FFG676E patut untuk 6 aplikasis: Industrial Automation and Motor Control, Machine Vision and Image Processing, Communications and Network Equipment, Test and Measurement Equipment, Aerospace and Defense Systems, High-Speed Data Acquisition.
Industrial Automation and Motor Control
The XC7Z045-2FFG676E fits industrial control systems that divide deterministic operations between programmable logic and embedded software. Its 350K Kintex-7 logic cells can host parallel control loops, encoder interfaces, timing blocks, and protection logic, while the dual 800 MHz ARM Cortex-A9 subsystem manages sequencing, diagnostics, communications, and supervisory control. The 676-FCBGA package supports dense integration but requires careful power decoupling and thermal validation. A production design should verify the junction-temperature budget, industrial interface requirements, and exact AMD package ballout before layout release.
Disebarkan
Machine Vision and Image Processing
For machine-vision and high-speed image-processing systems, the XC7Z045-2FFG676E allows parallel pixel operations, filtering, and frame-buffer interfacing to run as dedicated FPGA pipelines while the Cortex-A9 processors handle algorithms, configuration, and result management. The 350K logic cells provide substantial programmable-logic capacity, and the 800 MHz processor provides a separate software execution path for control software and network management. The design must account for external memory bandwidth, DDR routing, image-data timing closure, and thermal performance in the 27 mm by 27 mm FCBGA footprint.
Disebarkan
Communications and Network Equipment
The XC7Z045-2FFG676E is suitable for communications equipment requiring high-throughput packet processing, custom protocol handling, and embedded management. The Kintex-7 fabric can implement high-speed datapaths and time-critical interfaces, while the dual ARM Cortex-A9 subsystem runs control-plane software, network stacks, and diagnostics. The integrated SoC architecture reduces inter-chip communication compared with separate FPGA and processor solutions. Board-level validation should focus on SerDes or transceiver configuration, memory timing, clock jitter, reference-clock distribution, and the power-integrity requirements of the large FCBGA device.
Disebarkan
Test and Measurement Equipment
The XC7Z045-2FFG676E can serve as the programmable control core in test and measurement instruments where acquisition timing, pattern generation, and signal processing require deterministic hardware behavior. Programmable logic can execute parallel capture, correlation, or channel-sequencing operations, while the ARM subsystem manages test sequencing, calibration data, user interfaces, and data export. Its 800 MHz processor and 350K logic cells provide a flexible division of labor for evolving test platforms. Designers should evaluate external transceiver latency, memory interfaces, clock accuracy, and FPGA utilization in the final instrument architecture.
Disebarkan
Aerospace and Defense Systems
The XC7Z045-2FFG676E is applicable to aerospace, defense, and other embedded systems that benefit from combining hardened programmable logic with a processor subsystem. The Kintex-7 fabric supports concurrent acquisition, control, and communication functions, while the dual Cortex-A9 processors support operating-system software, health monitoring, and mission-data management. The listed 0 C to +100 C junction range and the REACH-unaffected status support early design planning but do not replace program-specific qualification. Use the AMD device documentation and your system assurance process to verify radiation, temperature, longevity, and sourcing requirements.
Disebarkan
High-Speed Data Acquisition
The XC7Z045-2FFG676E is well suited to high-speed data-acquisition designs where parallel logic resources must collect, filter, and buffer incoming data while the ARM subsystem handles triggering, analysis, and system control. The 350K logic cells can implement multiple acquisition channels or wide data paths, and the 800 MHz processor provides a separate management layer for configuration and post-processing. Practical implementation depends on the selected transceivers, memory architecture, and clocking scheme. Validate signal integrity at the device boundary, use the recommended power and ground ball geometry, and confirm timing closure against the actual data rates rather than the processor clock alone.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk XC7Z045-2FFG676E — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | XC7Z045-2FFG676I | XC7Z045-L2FFG676I | XC7Z045-2FBG676E |
|---|---|---|---|---|
| Package | 676-FCBGA (27x27) | 676-FCBGA (27x27) | 676-FCBGA (27x27) | 676-FCBGA (27x27) |
| Brand | AMD | AMD | AMD | AMD |
| FPGA Family | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 |
| Logic Cells | 350K | 350K | 350K | 350K |
| Processor | Dual ARM Cortex-A9 MPCore with CoreSight | Dual ARM Cortex-A9 MPCore with CoreSight | Dual ARM Cortex-A9 MPCore with CoreSight | Dual ARM Cortex-A9 MPCore with CoreSight |
| Maximum Processor Frequency | 800 MHz | 800 MHz | 800 MHz | 800 MHz |
| Number of Terminals | 676 | 676 | 676 | 676 |
| Supply Voltage | 1.2 V / 3.3 V | 1.2 V / 3.3 V | 1.2 V / 3.3 V | 1.2 V / 3.3 V |
| Junction Temperature Range | 0 C to +100 C | 0 C to +100 C | 0 C to +100 C | 0 C to +100 C |
| Technology | CMOS | CMOS | CMOS | CMOS |
| REACH Status | REACH Unaffected | REACH Unaffected | REACH Unaffected | REACH Unaffected |
Penyeberangsung Jelas
- Integrated dual-core processing and programmable logic (vsXC7Z045-2FFG676I)
- High-density integration in a 676-FCBGA package (vsXC7Z045-L2FFG676I)
- Broad software and hardware partitioning (vsXC7Z045-2FBG676E)
Catatan Desain
Use the AMD Zynq-7000 power-supply and decoupling guidance for the exact rails and operating modes. The listed 1.2 V and 3.3 V supplies are not interchangeable across the device, and the large FCBGA requires short, low-inductance connections from the power and ground balls to bulk and local decoupling capacitors. Check voltage tolerances, startup sequencing, and the load-current profile for every configured FPGA speed grade.
Estimate junction temperature using the AMD thermal model and the final PCB copper, via, airflow, and enclosure conditions. The device is listed for a 0 C to +100 C junction range, so board temperature alone is not the design limit. Provide the recommended thermal-via structure, avoid blocking airflow beneath the package where the design calls for it, and confirm margin at the highest expected ambient temperature and processing activity.
Plan the 676-FCBGA escape routing from the AMD package pinout and design rule documentation. Use the recommended ball-pad geometry and fanout strategy, maintain controlled-impedance routing for high-speed interfaces, and keep power, ground, and sensitive clock paths separated from noisy digital paths. A generic 676-ball symbol is not sufficient; cross-check every ball assignment against the device-specific package data.
Validate memory, transceiver, and high-speed I/O timing with the actual external devices and board models. The 800 MHz processor frequency does not define the maximum interface rate, and the 350K logic-cell count does not guarantee timing closure for a particular design. Run post-route timing analysis, power-integrity simulation, and channel compliance testing before releasing hardware for production.
Maklumat Kesediaan
REACH Unaffected is stated for the exact part in the product record. RoHS, lead-free, halogen-free, and conflict-minerals declarations were not identified for the exact ordering code.