AMD

XCKU040-L1FBVA676I Kintex UltraScale FPGA | AMD

MPN: XCKU040-L1FBVA676I ✓ Aktif
0.95 V or 0.90 V for -1L speed grade Vdss 676-pin FCBGA (FBVA676) Package -L1 Speed
MOQ: 1 |

XCKU040-L1FBVA676I Ringkasan

The AMD XCKU040-L1FBVA676I is a Kintex UltraScale field-programmable gate array built on 20 nm process technology, with approximately 530,250 FPGA logic cells and 312 I/O in a 676-pin FCBGA package. The -L1 speed grade is designed for lower static power than the standard -1 grade and supports operation at either 0.95 V or 0.90 V internal supply conditions, according to the AMD XCKU040 product documentation. It combines programmable logic, DSP resources, block RAM, high-speed serial transceivers, and general-purpose I/O in one adaptive-computing device.

A field-programmable gate array, or FPGA, is a semiconductor whose digital logic functions are configured after manufacture. An FPGA sits between fixed-function application-specific integrated circuits and software-programmable processors: it provides deterministic parallel processing and reconfigurable hardware acceleration while retaining the flexibility of firmware-driven updates. The Kintex UltraScale family is positioned between lower-cost Artix devices and higher-end Virtex devices for designs that require substantial logic density, signal-processing throughput, and high-speed connectivity.

The XCKU040 device is particularly suited to industrial control, test and measurement, telecommunications, data acquisition, embedded vision, and high-performance signal-processing systems. Its 530,250-cell resource count supports parallel algorithms, while the 676-ball FCBGA package exposes a large number of dedicated I/O, high-speed transceivers, and power-management connections. The package is appropriate for multilayer PCBs with controlled impedance, via-in-pad structures, and dense power distribution. Because the device is a large BGA, assembly yield, thermal management, and power sequencing should be planned before layout begins.

The -L1 suffix identifies the low-power speed-grade variant. Compared with the standard -1 device, the -L1 grade is screened for lower maximum static power and can operate with lower VCCINT voltage under the stated conditions. This makes it a sensible choice when energy consumption is a system constraint, but timing closure must still be verified against the selected tool version, clocking scheme, utilization, and I/O standards.

The AMD UltraScale FPGA product selection guide and the XCKU040 documentation provide the authoritative starting points for device selection. The -1L speed grade is explicitly described as supporting 0.95 V and 0.90 V VCCINT operation, while the family documentation should be used to confirm every configuration detail for the exact package and ordering code.

A complete deployment requires more than the FPGA itself: compatible DDR memory, high-speed clocking, configuration flash, power regulators, decoupling networks, and differential-pair routing must all be designed together. Use the package pinout files and the device-specific schematic, constraint, and layout guidance published by AMD rather than relying on a generic BGA pin map.

This page combines the device identity, package information, power and speed-grade context, drop-in alternatives, and engineering design notes for engineers evaluating the XCKU040-L1FBVA676I in production FPGA systems.

Pilihan pengganti yang segera untuk XCKU040-L1FBVA676I — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera XCKU040-L1FBVA676I (sama faktor bentuk dan kaki) — berbeza dalam Mounting Type, Speed Grade, Package Type, Temperature Grade.

AMD
Speed Grade: -1
Temperature Grade: Commercial
Bandingkan Dengan XCKU040-L1FBVA676I →
AMD
Mounting Type: Surface mount, ball grid array
Speed Grade: -1
Package Type: 676-ball FCBGA
Bandingkan Dengan XCKU040-L1FBVA676I →

XCKU040-1FBVA676I

✅ Masuk Drop-In
AMD
📦 676-pin FCBGA (FBVA676)
Kintex UltraScale FPGA · 424,200 cells · 312 I/O · 676-ball FCBGA · 676-BBGA, FCBGA · 676 balls · 20 nm · 0.95 V

Hubungi untuk harga

Lihat Datasheet →

XCKU040-1FBVA676C

✅ Masuk Drop-In
AMD
📦 676-pin FCBGA (FBVA676)
Kintex UltraScale FPGA · 530,250 cells · 242,400 CLBs · 21,606,000 bits · 312 I/O · 676 pins · 676-FCBGA, 27 x 27 mm · Surface mount

Hubungi untuk harga

Lihat Datasheet →

XCKU040-1LFBVA676I

✅ Masuk Drop-In
📦 676-pin FCBGA (FBVA676)
Same 676-pin FCBGA package and 530,250-cell Kintex UltraScale family, but ordering-code grade and temperature options require confirmation

📋 Alternatif rujukan (tidak dalam katalog)

XCKU040-L1FBVA676I Penilaian maksimum & Ciri-ciri Elektrik

Device Type Kintex UltraScale FPGA
FPGA Logic Cells 530,250 cells
I/O Count 312 I/O
Process Technology 20 nm
Internal Supply Voltage 0.95 V or 0.90 V for -1L speed grade
Speed Grade -L1
Package Type 676-pin FCBGA (FBVA676)
Package Ball Count 676 balls
Jenis Pemasangan Surface mount
Programmable Logic 530,250-cell Kintex UltraScale logic fabric
High-Speed I/O 312 user I/O
Configuration Support AMD UltraScale FPGA configuration architecture
FPGA Resource Type Reconfigurable digital logic, DSP, block RAM, and serial transceiver resources

Panduan Konfigurasi Pin XCKU040-L1FBVA676I 676 balls

Konfigurasi pin untuk XCKU040-L1FBVA676I (676 balls pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.

Garis bentuk pengecah pakai 676 balls untuk XCKU040-L1FBVA676I

Tiada data garisan pin yang diperoleh untuk XCKU040-L1FBVA676I.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

XCKU040-L1FBVA676I patut untuk 6 aplikasis: Industrial Control and Automation, Test and Measurement Instrumentation, Telecommunications and Network Interfaces, Data Acquisition and Signal Processing, Embedded Vision and Image Processing, Aerospace and Defense Evaluation Systems.

🏭

Industrial Control and Automation

The XCKU040-L1FBVA676I is suitable for industrial controllers that combine multiple real-time control loops with communication and data-acquisition functions. Its approximately 530,250 logic cells allow parallel execution of motion control, sensor conditioning, and protocol handling, while the 676-pin FCBGA package provides extensive connectivity for digital I/O, high-speed transceivers, and external memory. The -L1 speed grade is useful when static power must be controlled in continuously energized equipment, although the final timing margin must be checked against the industrial temperature range and selected clock frequencies.

📺

Test and Measurement Instrumentation

High-performance measurement instruments can use the XCKU040-L1FBVA676I for parallel acquisition, real-time filtering, waveform analysis, and protocol-specific processing. The large logic population supports wide parallel data paths and multiple DSP pipelines, while 312 I/O provide substantial interface parallelism for capture boards, digitizers, and clock-distribution networks. The -L1 grade reduces static-power emphasis in rack-mounted or portable test systems. Keep high-speed analog and digital sections physically separated, and use controlled-impedance routing for acquisition and reference-clock signals.

🌐

Telecommunications and Network Interfaces

The XCKU040-L1FBVA676I fits network-interface, line-card, and packet-processing designs that need substantial parallelism plus high-speed serial connectivity. Its programmable logic can implement protocol termination, aggregation, buffering, and traffic classification, while the Kintex UltraScale transceiver resources support high-speed serial links. The 676-pin package also allows a denser board layout than a leaded package, but it demands careful return-path continuity and reference-plane design. Power estimation should include both static device consumption and activity-dependent I/O and transceiver power.

🖥️

Data Acquisition and Signal Processing

The XCKU040-L1FBVA676I is appropriate for parallel data-acquisition systems, digital filtering, real-time spectral analysis, and high-throughput sensor processing. Approximately 530,250 logic cells allow multiple channels to be processed concurrently, and the 312-I/O count supports wide parallel buses and multi-chip synchronization. Use dedicated clocking resources for deterministic pipelines and constrain all high-speed interfaces in the implementation tool. The -L1 low-power grade can help in space-constrained or battery-influenced systems, but high-throughput designs should also evaluate thermal behavior under sustained activity.

🎥

Embedded Vision and Image Processing

The XCKU040-L1FBVA676I can implement parallel image pipelines, feature extraction, sensor fusion, and real-time pre-processing in industrial cameras and machine-vision systems. Its large programmable fabric allows multiple pixels or lanes to be processed simultaneously, while dedicated DSP and block-RAM resources accelerate convolution, filtering, and buffering tasks. The FBVA676 package provides enough connectivity for multi-camera or high-bandwidth sensor interfaces, but high-speed sensor links require strict length matching and continuous return paths. Validate the -L1 timing margin at the required pixel rate before release.

✈️

Aerospace and Defense Evaluation Systems

The XCKU040-L1FBVA676I is appropriate for laboratory, ground-support, and ruggedized evaluation platforms that need high programmable throughput and extensive pin access. Its configurable logic supports redundant data paths, protocol translation, timing instrumentation, and fault-capture features without relying on a fixed application processor. The -L1 grade is attractive where static power is important, but qualification for flight hardware requires a separate aerospace or defense procurement process and cannot be inferred from the commercial ordering code. Confirm temperature range, radiation, screening, and traceability requirements with the manufacturer before committing.

What is the AMD XCKU040-L1FBVA676I?
The AMD XCKU040-L1FBVA676I is a Kintex UltraScale FPGA with approximately 530,250 logic cells and 312 I/O in a 676-pin FCBGA package. It uses 20 nm process technology and belongs to the -L1 low-power speed grade, which supports 0.95 V or 0.90 V internal operating conditions according to the AMD XCKU040 documentation. It is intended for designs requiring high logic density, parallel signal processing, and programmable connectivity.
How many I/O and logic cells does the XCKU040-L1FBVA676I have?
The XCKU040-L1FBVA676I provides approximately 530,250 FPGA logic cells and 312 user I/O. These resources support parallel data paths, control logic, digital filtering, and accelerator functions in a single adaptive-computing device. The exact resource inventory for each embedded block should be confirmed in the AMD device resource tables before finalizing the design.
What does the -L1 speed grade mean for the XCKU040?
The -L1 designation identifies the low-power speed grade of the Kintex UltraScale family. According to the AMD XCKU040 datasheet information, -1L devices can operate at either 0.95 V or 0.90 V VCCINT and are screened for lower maximum static power than the standard -1 grade. This can reduce power consumption in designs that do not require the highest performance grade.
Where can I download the XCKU040-L1FBVA676I datasheet?
The XCKU040 family datasheet is available through the AMD documentation ecosystem, and distributor-hosted copies of the XCKU040-L1FBVA676I datasheet are also available through the listed part-detail pages. Use the AMD product-selection and device documentation for the authoritative device tables, package information, and configuration requirements. The AMD package-pinout-files page provides the matching ASCII pin files in TXT and CSV formats for board-level work.
Where can I find the XCKU040-L1FBVA676I pinout?
The XCKU040-L1FBVA676I pinout should be taken from the AMD UltraScale package-device pinout files rather than a generic 676-ball BGA diagram. AMD publishes package pin files in TXT and CSV formats and documents their structure in UG575. Match the exact FBVA676 package and the -L1 device configuration before assigning PCB nets, power rails, configuration pins, and transceiver connections.
Is the XCKU040-L1FBVA676I a drop-in replacement for the XCKU040-1FBVA676I?
The XCKU040-L1FBVA676I and XCKU040-1FBVA676I use the same 676-pin FCBGA package and the same Kintex UltraScale device family, so their physical land patterns are compatible. They are not electrically identical in every operating condition because the -L1 grade is the low-power speed option and supports the stated lower-voltage operating mode. Timing, power, thermal, and tool constraints must be revalidated before treating the two devices as interchangeable.
What is the best drop-in replacement for XCKU040-L1FBVA676I?
The closest same-package option identified for the XCKU040-L1FBVA676I is the XCKU040-1FBVA676I, which uses the same 676-pin FCBGA footprint and the same 530,250-logic-cell Kintex UltraScale platform. The main distinction is the speed and power grade: the -1 variant is the standard grade, while the -L1 variant emphasizes lower static power and supports the stated 0.90 V or 0.95 V options. Validate timing closure, thermal performance, and power sequencing for the replacement build.
Can the XCKU040-1FBVA676C replace the XCKU040-L1FBVA676I?
The XCKU040-1FBVA676C is a same-family, same-package option in the FBVA676 footprint, but it is not an unconditional functional substitute because the -L1 and -1C designations identify different speed and temperature grades. The package permits board-level reuse, while the device-level acceptance criteria include operating temperature, power mode, timing margin, and qualification requirements. Verify the complete ordering-code comparison with AMD documentation.
When should I choose the XCKU040-L1FBVA676I over the standard -1 grade?
Choose the XCKU040-L1FBVA676I when static power consumption is a primary constraint and the design can operate within the -L1 timing and voltage conditions. It is preferable for power-constrained industrial, communications, and embedded systems that do not need the standard -1 performance envelope. Choose the standard -1 grade when the design relies on the higher performance margin or requires a different temperature-grade combination.
How much power does the XCKU040-L1FBVA676I consume?
The XCKU040-L1FBVA676I power consumption depends on VCCINT voltage, utilization, switching activity, I/O loading, temperature, and the selected configuration. The -L1 speed grade is specifically screened for lower maximum static power, but a single operating figure is not representative of every design. Use AMD power estimation tools with the actual clock plan, utilized resources, and I/O activity, then verify the calculated rails against the device power-supply requirements.
What PCB design constraints apply to a 676-pin FCBGA FPGA?
A 676-pin FCBGA design requires a multilayer PCB with controlled-impedance routing, dense via-in-pad or via-construction rules, and careful power-plane segmentation. Place the FPGA centrally where practical, route high-speed differential pairs without excessive vias, and provide low-inductance connections from the package balls to the decoupling network. The AMD package-pinout and high-density design guidance should control the final escape-routing and thermal-via strategy.
Which tools are used to design the XCKU040-L1FBVA676I?
The XCKU040-L1FBVA676I is designed with the AMD/Xilinx FPGA implementation environment for Kintex UltraScale devices, including HDL synthesis, implementation, timing analysis, and programming tools. The exact supported tool versions and device files should be selected from the matching AMD Vivado release and device-support documentation. Confirm that the selected tools support the -L1 speed grade and FBVA676 package before beginning implementation.
What applications are best suited to the XCKU040-L1FBVA676I?
The XCKU040-L1FBVA676I is well suited to industrial control, test and measurement, telecommunications, data acquisition, embedded vision, and high-speed signal-processing systems. Its large programmable-logic population supports parallel pipelines, while the low-power -L1 grade helps when system energy limits are meaningful. The 676-pin FCBGA package provides substantial connectivity for high-speed memory, serial links, and parallel peripherals.
How do I check whether the XCKU040-L1FBVA676I is in stock?
The XCKU040-L1FBVA676I is listed as in stock by one of the distributor results, but inventory levels for high-value FPGAs change quickly. Use the Request a Quote form on this page to request current availability, quantity breaks, and lead-time confirmation for the exact MPN and package. Because these devices have long configuration and allocation cycles, confirm production quantities and delivery schedule early in the design schedule.
What is the price of the XCKU040-L1FBVA676I?
The XCKU040-L1FBVA676I is a high-value FPGA whose commercial terms can vary with quantity, allocation, and lead time. Use the Request a Quote form on this page for the current unit quote, volume pricing, and availability for the exact ordering code. The listed distributor reference confirms a price reference for the part, but purchasing decisions should use a current quotation rather than a static listing.
How do I request a quote and lead time for the XCKU040-L1FBVA676I?
Submit the XCKU040-L1FBVA676I requirement through the Request a Quote form on this page. Include annual usage, prototype quantities, target package details, and required delivery dates so the quote can reflect the correct allocation channel. For production programs, request a schedule that allows device sourcing, PCB fabrication, assembly, and system validation without relying on an unconfirmed inventory position.

Data referensi kejuruteraan untuk XCKU040-L1FBVA676I — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the XCKU040-L1FBVA676I when a design needs the Kintex UltraScale XCKU040 resource level and static power is more important than selecting the standard -1 performance grade. Its approximately 530,250 logic cells, 312 I/O, and 676-pin FCBGA package suit parallel processing, high-speed connectivity, and dense multi-channel systems. The XCKU040-1FBVA676I is the natural same-footprint alternative when standard -1 timing margin is preferable or the low-power voltage mode is not needed. Use the XCKU040-1FBVA676C when the required ordering code calls for the -1C grade, and use the XCKU040-1LFBVA676I when the -1L ordering code is required, after checking temperature and qualification details. None of these alternatives removes the need to re-run timing, power, thermal, and board-level validation because speed-grade and temperature-grade differences can change system behavior.

Perbandingan dengan Gantian

Parametr Produk Ini XCKU040-1FBVA676I XCKU040-1FBVA676C XCKU040-1LFBVA676I
Brand AMD AMD AMD AMD
Package 676-pin FCBGA (FBVA676) 676-pin FCBGA (FBVA676) 676-pin FCBGA (FBVA676) 676-pin FCBGA (FBVA676)
FPGA Family Kintex UltraScale Kintex UltraScale Kintex UltraScale Kintex UltraScale
Logic Cells 530,250 cells 530,250 cells 530,250 cells 530,250 cells
I/O Count 312 I/O 312 I/O 312 I/O 312 I/O
Process Technology 20 nm 20 nm 20 nm 20 nm
Speed and Power Grade -L1 low-power grade -1 standard grade -1C commercial temperature grade -1L low-power grade; ordering-code details require confirmation
Configuration Interface Kintex UltraScale configuration architecture Kintex UltraScale configuration architecture Kintex UltraScale configuration architecture Kintex UltraScale configuration architecture

Penyeberangsung Jelas

  • Low-power-oriented speed grade within the Kintex UltraScale family (vsXCKU040-1FBVA676I)
  • High-density programmable fabric in a standard 676-pin FCBGA footprint (vsXCKU040-1FBVA676C)
  • Same-family alternative with identical land-pattern strategy (vsXCKU040-1LFBVA676I)

Catatan Desain

Plan the complete rail sequence before PCB layout: VCCINT, VCCAUX, VCCBRAM, VCCO, configuration, and transceiver supplies have distinct sequencing and current requirements. The -L1 grade supports 0.95 V or 0.90 V VCCINT operation according to the AMD family documentation, so do not apply the -1 rail scheme by analogy. Use AMD power estimation with the expected clock rates, I/O activity, and transceiver utilization, then size regulators and inductors for both average and transient load.

A 676-ball FCBGA requires a dense escape-routing strategy. Use the AMD package-pinout files and the device-specific fanout guidance to assign every package ball, preserve uninterrupted reference planes beneath high-speed pairs, and place decoupling capacitance directly at the package power and ground balls. Confirm via-in-pad, buried via, solder-mask, and assembly rules with the selected PCB fabricator before releasing the design.

Do not estimate junction temperature from idle power alone. Kintex UltraScale power rises with logic utilization, clock activity, I/O toggling, and transceiver use, making a realistic activity profile necessary for thermal analysis. Spread the FPGA power and ground connections across the package, provide thermal-via arrays beneath the device, and validate the assembled board at maximum expected ambient temperature and activity level.

Constrain all external clock, transceiver, and memory interfaces with board-aware timing constraints rather than relying on default pin constraints. For high-speed serial links, verify reference-plane continuity, layer transitions, return vias, and connector or package escape losses in the signal-integrity workflow. Keep configuration and JTAG paths away from switching power stages to reduce susceptibility to false transitions during startup and programming.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The available product and distributor information identifies the device family, package, logic-cell count, I/O count, process technology, and speed grade, but does not state RoHS, REACH, halogen-free, conflict-minerals, or AEC-Q100 status for this exact ordering code.

Pencarian Berhubungan

xcku040 datasheet xcku040 2ffva1156e xcku040 2ffva1156i xcku040 1ffva1156c xcku040 ffva1156 xcku040 3ffva1156e xcku040 1fbva676c xcku040 2ffva1156e datasheet XCKU040-L1FBVA676I datasheet XCKU040-L1FBVA676I pinout XCKU040-L1FBVA676I equivalent XCKU040-L1FBVA676I replacement XCKU040-L1FBVA676I price AMD XCKU040-L1FBVA676I XCKU040-L1FBVA676I application circuit

Komponen dan Tanda berkaitan

AMD Xilinx Kintex UltraScale XCKU040 XCKU040-L1FBVA676I XCKU040-1FBVA676I XCKU040-1FBVA676C XCKU040-1LFBVA676I FPGA field-programmable gate array adaptive computing programmable logic Kintex UltraScale FPGA 20 nm process technology 530,250 logic cells 312 I/O 676-pin FCBGA FBVA676 VCCINT 0.95 V 0.90 V -L1 speed grade -1L speed grade Vivado DSP block RAM high-speed serial transceiver industrial control test and measurement telecommunications data acquisition embedded vision UG575 controlled impedance via-in-pad RoHS REACH AEC-Q100
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ