XCKU11P-L1FFVA1156I - Kintex UltraScale+ FPGA | AMD
MPN: XCKU11P-L1FFVA1156I ✓ AktifXCKU11P-L1FFVA1156I Ringkasan
An FPGA is a semiconductor whose digital functionality is defined after manufacture by loading a configuration bitstream. The XCKU11P-L1FFVA1156I belongs to the FPGA and CPLD hierarchy within programmable-logic devices. Its 653,100 logic elements provide parallel digital resources, while the Kintex UltraScale+ architecture also integrates programmable I/O, memory resources, clocking, and high-speed transceivers for complex connected designs.
The device provides 464 I/O and 37,320 LABs/CLBs, making the L1FFVA1156I suitable for designs requiring substantially more logic than conventional CPLDs or small FPGAs. Its large 1156-BBGA FCBGA package supports dense high-pin-count connectivity, including external memory interfaces, clocks, control signals, and serial I/O. The exact package dimensions, pin functions, voltage ratings, and power limits should be confirmed in the manufacturer package pinout and product documentation before layout release.
The -1 and -2 ordering options shown for the XCKU11P device family identify different speed grades within the same 1156-pin package organization. The L1 suffix belongs to the extended-temperature ordering family, while the final I suffix denotes industrial temperature grade. Designers must verify timing closure, power budgeting, and operating-temperature requirements against the exact AMD datasheet and product-selection guide before substituting speed grades.
Typical uses include high-throughput network interfaces, protocol bridges, test and measurement equipment, industrial control systems, high-speed data acquisition, and accelerator subsystems. The large logic count supports parallel datapaths and control logic, while UltraScale+ serial resources support high-speed links to transceivers, memory, and adjacent processing devices.
PCB implementation requires careful attention to the 1156-BBGA footprint, power-plane integrity, decoupling, thermal management, and high-speed routing. Use the AMD package pinout files for every ball assignment and land pattern. Confirm whether the power configuration requires sequence-sensitive ramps, and reserve suitable copper area beneath the package for heat spreading.
This product record combines device capacity, package identity, ordering-code distinctions, sourcing guidance, and drop-in family alternatives into an engineering-focused reference. It also identifies the documentation needed for signal integrity, power planning, thermal analysis, and lifecycle procurement decisions.
Pilihan pengganti yang segera untuk XCKU11P-L1FFVA1156I — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera XCKU11P-L1FFVA1156I (sama faktor bentuk dan kaki) — berbeza dalam Logic Cells, Package Type, User I/O.
XCKU11P-1FFVA1156I
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →XCKU11P-1FFVA1156E
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →XCKU11P-2FFVA1156I
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →XCKU11P-1FFVA1156EES9919
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
XCKU11P-2FFVA1156I5202
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
XCKU11P-L1FFVA1156I Penilaian maksimum & Ciri-ciri Elektrik
| Device Type | Kintex UltraScale+ FPGA |
| Programmable Logic Elements | 653,100 elements |
| Logic Cells | 653,100 cells |
| LABs/CLBs | 37,320 LABs/CLBs |
| User I/O | 464 I/O |
| Kemasan | 1156-BBGA FCBGA |
| Package Type | FCBGA |
| Ball Count | 1,156 balls |
| Jenis Pemasangan | Surface mount |
| Device Family | Kintex UltraScale+ |
| Programmable Logic | FPGA |
| Ordering Family | L1FFVA1156 |
| Temperature Grade | Industrial, I suffix |
| Related Speed Grade | -1 speed grade |
| Related Speed Grade | -2 speed grade |
Panduan Konfigurasi Pin XCKU11P-L1FFVA1156I fcbga
Konfigurasi pin untuk XCKU11P-L1FFVA1156I (fcbga pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk XCKU11P-L1FFVA1156I.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
XCKU11P-L1FFVA1156I patut untuk 6 aplikasis: High-Speed Network Interface, Industrial Data Acquisition, Test and Measurement Instrumentation, Protocol Bridge and Gateway, High-Performance Embedded Accelerator, Aerospace Signal Processing.
High-Speed Network Interface
The XCKU11P-L1FFVA1156I fits high-speed network-interface designs that combine extensive packet-processing logic with multiple external interfaces. Its 653,100 logic elements and 37,320 LABs/CLBs provide capacity for headers, buffers, queues, traffic management, and supervisory functions, while 464 I/O support high-speed parallel buses and control signals. The Kintex UltraScale+ architecture can also place serial interfaces beside programmable packet-processing resources, reducing inter-device data movement. The principal design consideration is timing: pin assignments, clock regions, transceiver selection, and PCB signal integrity must be planned together. Because the device uses a 1156-BBGA FCBGA package, power delivery and thermal design require careful PCB planning before the interface counts and line rates are finalized.
Disebarkan
Industrial Data Acquisition
The XCKU11P-L1FFVA1156I is suitable for industrial acquisition systems that must combine parallel sensor interfaces with real-time processing. Its 464 I/O can support digital sensor buses, trigger lines, counters, and control outputs, while 653,100 logic elements can implement filtering, calibration, timestamp handling, buffering, and protocol conversion. The industrial-oriented L1 and I ordering designations fit applications requiring extended-temperature capability, subject to confirmation in the exact device documentation. Engineers should establish clock topology and I/O standards early because those choices determine pin constraints, board-layer transitions, and timing margins. The 1156-BBGA footprint also demands validated power sequencing, decoupling, and thermal management under sustained acquisition workloads.
Disebarkan
Test and Measurement Instrumentation
The XCKU11P-L1FFVA1156I can support advanced test and measurement instruments that combine stimulus generation, acquisition, pattern processing, and data analysis in one device. The 653,100 logic elements and 37,320 LABs/CLBs allow multiple parallel channels and deep digital pipelines, while 464 I/O provide connectivity to converters, memory, trigger circuitry, and front-panel control logic. Its programmable architecture permits field updates when measurement algorithms change. Timing-critical instrumentation must use the correct speed grade and evaluate worst-case routing delays rather than relying only on nominal logic capacity. Board implementation must also account for analog isolation, low-noise supplies, reference clocks, and the thermal requirements of the 1156-BBGA FCBGA package.
Disebarkan
Protocol Bridge and Gateway
The XCKU11P-L1FFVA1156I fits protocol bridges and embedded gateways that translate among serial, parallel, memory, and network interfaces. Its large logic fabric can hold multiple conversion engines, buffering layers, and control planes, allowing protocols to coexist without relying on several smaller programmable devices. The 464 I/O positions provide substantial connectivity for external memories and narrow interfaces, while UltraScale+ resources can support high-speed links where the selected configuration permits. Pin budgeting and resource sharing must be modeled before PCB allocation because memory interfaces and high-speed transceivers have fixed placement constraints. A robust design also requires the AMD package pinout files, verified power rails, and thermal analysis for the 1,156-ball FCBGA footprint.
Disebarkan
High-Performance Embedded Accelerator
The XCKU11P-L1FFVA1156I is suitable for accelerator subsystems that partition algorithms across parallel programmable pipelines. Its 653,100 logic elements and 37,320 LABs/CLBs allow designers to implement multiple arithmetic blocks, buffering stages, control engines, and data-format converters within one FPGA. The 464 I/O can connect external memories and accelerators, while programmable serial resources support high-speed data movement when the device configuration includes the required transceivers. Performance depends on memory bandwidth, clocking, register placement, and routing congestion rather than on the headline cell count alone. Use the appropriate speed grade for timing closure and preserve thermal headroom by modeling the actual utilization and I/O activity in the final 1156-BBGA implementation.
Disebarkan
Aerospace Signal Processing
The XCKU11P-L1FFVA1156I can serve as a configurable signal-processing platform in aerospace and defense systems where long product availability, radiation qualification, and exact grade control are important. Its 653,100 logic elements support parallel filtering, demodulation, tracking, and control functions, while 464 I/O support module interfaces and external data paths. The L1 and I suffix indicates the requested ordering family and industrial-grade designation, but it does not by itself establish aerospace qualification. Engineers must verify AEC-Q100 status, radiation performance, temperature limits, and any additional screening requirements directly in the AMD documentation. Board-level design should include controlled power rails, redundant clocking where required, and thermal analysis suitable for the high-density FCBGA package.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk XCKU11P-L1FFVA1156I — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | XCKU11P-1FFVA1156I | XCKU11P-1FFVA1156E | XCKU11P-2FFVA1156I | XCKU11P-1FFVA1156EES9919 | XCKU11P-2FFVA1156I5202 |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 1156-BBGA FCBGA | 1156-BBGA FCBGA | 1156-BBGA FCBGA | 1156-BBGA FCBGA | 1156-BBGA FCBGA | 1156-BBGA FCBGA |
| Device Family | Kintex UltraScale+ | Kintex UltraScale+ | Kintex UltraScale+ | Kintex UltraScale+ | Kintex UltraScale+ | Kintex UltraScale+ |
| Ordering Grade | L1 family, I suffix | -1 speed grade, I suffix | -1 speed grade, E suffix | -2 speed grade, I suffix | -1E speed grade, ES9919 suffix | -2 speed grade, 5202 suffix |
| Programmable Logic Type | FPGA | FPGA | FPGA | FPGA | FPGA | FPGA |
Penyeberangsung Jelas
- Preserves the large Kintex UltraScale+ logic footprint while using the requested L1 ordering family (vsXCKU11P-2FFVA1156I)
- Provides the listed 653,100 logic elements and 37,320 LABs/CLBs in the same 1156-BBGA package (vsXCKU11P-1FFVA1156I)
- Uses the same package organization as documented -1E and -2 ordering variants for PCB reuse (vsXCKU11P-1FFVA1156E)
Catatan Desain
Use the AMD UltraScale package device pinout files for the 1156-BBGA land pattern and ball assignments; the compact package library does not include a 1,156-ball diagram. Preserve the manufacturer-defined ball-grid geometry, pad size, solder-mask opening, and paste stencil recommendations. Place decoupling and power-distribution structures directly beneath the device where the reference design permits, and route high-speed links with continuous reference planes and controlled impedance.
Build the power plan from the exact XCKU11P-L1FFVA1156I datasheet rather than from a generic Kintex UltraScale+ schematic. Confirm every supply rail, its voltage, current limit, sequencing rule, and decoupling requirement. The operating current depends on speed grade, resource utilization, configuration, I/O activity, and temperature, so estimate worst-case demand separately from typical values and verify that the board can deliver it during startup and full activity.
The 1156-BBGA FCBGA package can concentrate heat in a small area under sustained logic or I/O activity. Use the package thermal model with the actual PCB stack-up, copper distribution, airflow, and ambient temperature. Validate the design with board-level thermal analysis and, where required, temperature sensors or system-level tests. Avoid treating a logical-cell count of 653,100 as a utilization estimate because real switching activity and routing determine power dissipation.
Do not treat the L1, -1, -2, E, I, ES9919, or 5202 suffixes as interchangeable decoration. Speed grade affects timing margin, while temperature and qualification suffixes affect environmental and sourcing conditions. Before substitution, compare the exact ordering table, device status, configuration compatibility, package pinout, power rails, and qualification requirements. A same-package family match is only a starting point for engineering approval.
Maklumat Kesediaan
Compliance and qualification attributes require confirmation from the exact AMD device documentation. The I suffix identifies the ordering grade but does not independently establish AEC-Q100 qualification.