XMC1404F064X0200AAXUMA1 - 48MHz Cortex-M0 MCU | Infineon
MPN: XMC1404F064X0200AAXUMA1 ✓ AktifXMC1404F064X0200AAXUMA1 Ringkasan
A microcontroller is a programmable system-on-chip that combines a processor core, memory, digital peripherals, and interface functions on one integrated circuit. The ARM Cortex-M0 core provides a compact, low-complexity architecture for deterministic control tasks. Within the broader semiconductor hierarchy, this device is a microcontroller, embedded processor, and industrial automation IC with dedicated hardware for embedded power and motor-control systems.
The XMC1404F064X0200AAXUMA1 combines a 48 MHz processing clock with 200 KB of Flash and 16 KB of SRAM. Its 64-lead LQFP package provides 64 externally accessible connection points, making it suitable for boards requiring a moderate number of general-purpose and control signals. The XMC1400 family also includes two CAN nodes, while its dedicated control peripherals support the timing and feedback requirements of real-time motor-control and power-conversion systems.
The device uses the ARM Cortex-M0 instruction set and belongs to the XMC1000 family of industrial microcontrollers. Its 200 KB Flash provides on-chip program storage, while 16 KB of SRAM supports working memory, stack space, and state variables. For motor-control designs, this combination allows control firmware, parameter tables, and supervisory logic to remain local to the controller instead of depending on external program memory.
Typical uses include brushless DC motor controllers, digital power converters, LED lighting systems, industrial automation equipment, and human-machine interface controllers. In these systems, the microcontroller can combine fast control-loop execution with communication and general-purpose I/O while operating from a single 10 mm by 10 mm LQFP-64 package.
PCB planning should follow the pin-description and package-outline tables in the manufacturer datasheet. Pay particular attention to supply, ground, clock, reset, and debug connections because incorrect assignment can prevent programming or compromise signal integrity. Stable decoupling close to the device and a deliberate ground-return strategy are important in motor-control and power-conversion systems.
This page combines the XMC1404 industrial MCU architecture, verified manufacturer and distributor product information, package and memory characteristics, and engineering guidance for motor-control, digital power conversion, LED lighting, and HMI designs. It also identifies same-footprint alternatives and distinguishes confirmed drop-in options from parts that would require software, peripheral, or package revalidation.
Pilihan pengganti yang segera untuk XMC1404F064X0200AAXUMA1 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera XMC1404F064X0200AAXUMA1 (sama faktor bentuk dan kaki) — berbeza dalam Flash Memory, Package, Series.
XMC1404Q064X0200AAXUMA1
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →XMC1404F064X0200AAXUMA1 Penilaian maksimum & Ciri-ciri Elektrik
| Product Type | 32-bit industrial microcontroller |
| Processor Core | ARM Cortex-M0 |
| Architecture | ARM 32-bit |
| Maximum Core Frequency | 48 MHz |
| Flash Memory | 200 KB |
| Flash Organization | 200 KB (200K x 8) |
| SRAM | 16 KB |
| Kemasan | LQFP-64, 10 x 10 mm |
| Kiraan Pin | 64 pins |
| Jenis Pemasangan | Surface mount |
| Series | XMC1000 series |
| Device Family | XMC1400 industrial series |
| Target Application | Real-time embedded control |
| Primary Application Areas | Motor control, digital power conversion, LED lighting, HMI |
| CAN Node Count | 2 nodes |
| Industrial Classification | Industrial microcontroller |
Panduan Konfigurasi Pin XMC1404F064X0200AAXUMA1 lqfp-64, 10 x 10 mm
Konfigurasi pin untuk XMC1404F064X0200AAXUMA1 (lqfp-64, 10 x 10 mm pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk XMC1404F064X0200AAXUMA1.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
XMC1404F064X0200AAXUMA1 patut untuk 6 aplikasis: Brushless DC Motor Control, Digital Power Conversion, Industrial LED Lighting Control, Industrial Human-Machine Interface, Automotive and Vehicle Auxiliary Control, Connected Industrial Sensor Node.
Brushless DC Motor Control
The XMC1404F064X0200AAXUMA1 fits brushless DC motor controllers that require deterministic real-time execution and several control signals. Its 48 MHz ARM Cortex-M0 core supports fast current and position-loop processing, while the XMC1400 family's dedicated motor-control peripherals reduce the burden of time-critical switching tasks. The 200 KB Flash stores commutation tables, tuning parameters, and supervisory logic, and 16 KB of SRAM accommodates state variables. Install the device in the LQFP-64 footprint and assign motor-control outputs, sensing inputs, communications, and protection signals according to the manufacturer pin-description table. Validate dead time, current-sense scaling, fault handling, and thermal performance in the final power stage.
Digital Power Conversion
The XMC1404F064X0200AAXUMA1 is appropriate for digitally controlled converters where firmware-based regulation must operate alongside high-speed control hardware. The XMC1400 family includes dedicated peripherals for power-conversion applications, and its 48 MHz Cortex-M0 core can execute supervisory loops, fault management, parameter updates, and communications. With 200 KB of Flash, control algorithms and configuration tables can be stored locally; 16 KB of SRAM provides working memory for calculations and state. Place the MCU close to the power-control circuitry and follow the datasheet pin table for supply, ground, and control assignments. Confirm that switching-node isolation, analog-signal conditioning, and protection timing match the converter topology.
Industrial LED Lighting Control
The XMC1404F064X0200AAXUMA1 can coordinate dimming, monitoring, and communications in an industrial LED lighting controller. Its 200 KB Flash provides ample room for lighting profiles, calibration data, communication protocols, and diagnostic logic, while the 48 MHz core supports responsive control of multiple channels. The XMC1400 family's two CAN nodes are useful for centralized building or factory lighting control where status and commands are exchanged over a network. Use the LQFP-64 package when the design requires numerous discrete outputs, sensing inputs, or interface signals. Design the external driver stage independently from the MCU and isolate high-current LED paths from sensitive control and ground returns.
Industrial Human-Machine Interface
The XMC1404F064X0200AAXUMA1 is suitable for compact industrial HMI controllers that combine display or input handling with embedded machine control. Its 48 MHz Cortex-M0 core provides enough responsiveness for user-interface tasks and background communication, and 200 KB of Flash can hold application graphics metadata, menu logic, and protocol handlers. Two CAN nodes allow the HMI controller to interface with sensors and actuator modules on separate communication segments. The 64-pin LQFP package provides more I/O than a minimal microcontroller package, supporting buttons, indicators, displays, and external interfaces. Validate signal levels, ESD protection, grounding, and display timing; the MCU should not directly drive high-voltage or high-current display elements.
Automotive and Vehicle Auxiliary Control
The XMC1404F064X0200AAXUMA1 can support non-safety-critical vehicle auxiliary controllers where real-time monitoring and communication are required. The XMC1400 family's 48 MHz Cortex-M0 core executes application logic, while two CAN nodes facilitate vehicle-network communication and diagnostics. Its 200 KB Flash and 16 KB of SRAM support layered application code and working state. The LQFP-64 package offers a practical pin count for switches, sensors, indicators, and communication transceivers. Before deployment, confirm the device's exact qualification status, temperature limits, supply range, and automotive qualification requirements in the Infineon ordering documentation. Do not infer automotive suitability solely from the family name.
Connected Industrial Sensor Node
The XMC1404F064X0200AAXUMA1 fits a connected industrial sensor node that gathers measurements, applies local filtering, and reports machine status. The 200 KB Flash accommodates drivers, calibration coefficients, protocol stacks, and remote-update logic, while 16 KB of SRAM supports sample buffers and protocol processing. Two CAN nodes can connect local sensors to a higher-level controller without merging every function onto one network segment. The 48 MHz core allows time-based sampling and deterministic peripheral scheduling, and the 64-pin package simplifies access to discrete sensor inputs and communication interfaces. Apply the datasheet pin table for every signal and protect external sensor wiring against industrial surge and ESD events.
Data referensi kejuruteraan untuk XMC1404F064X0200AAXUMA1 — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | XMC1404Q064X0200AAXUMA1 |
|---|---|---|
| Brand | Infineon | Infineon |
| Package | LQFP-64, 10 x 10 mm | LQFP-64 - same package |
| Processor Core | ARM Cortex-M0 | ARM Cortex-M0 |
| Word Architecture | 32-bit | 32-bit |
| Maximum Core Frequency | 48 MHz | 48 MHz |
| Flash Memory | 200 KB | 200 KB |
| SRAM | 16 KB | 16 KB |
| Series | XMC1400 / XMC1000 family | XMC1400 / XMC1000 family |
| CAN Nodes | 2 nodes | 2 nodes |
| Primary Applications | Motor control, digital power conversion, LED lighting, HMI | Motor control, digital power conversion, LED lighting, HMI |
Penyeberangsung Jelas
- Combines an industrial Cortex-M0 core with dedicated real-time control resources (vsXMC1404Q064X0200AAXUMA1)
- Provides sufficient on-chip memory for control firmware and parameter tables (vsXMC1404Q064X0200AAXUMA1)
- Supports distributed industrial communication (vsXMC1404Q064X0200AAXUMA1)
Catatan Desain
Use the Infineon pin-description table and package drawing to assign all 64 LQFP connections. Keep supply and ground pins connected according to the datasheet recommendations, place decoupling capacitors close to their associated pins, and provide a low-impedance return path for switching and sensing currents. A common mistake is to infer pin functions from an XMC1000-family board without checking the exact derivative table.
Separate analog measurement, communications, and digital control paths on the PCB. In motor-control and digital power-conversion designs, route high-current switching returns away from current-sense and reference grounds. Keep crystal or clock circuitry away from high-current switching nodes, and follow the device's recommended decoupling network to avoid adding instability to control loops.
Do not treat every XMC1404 ordering code as an automatic substitute. The F and Q identifiers can denote different derivative or qualification conditions even when core, memory, and package dimensions match. Before replacing XMC1404F064X0200AAXUMA1, check the ordering table, errata, temperature range, qualification requirement, and whether existing firmware depends on a peripheral or pin-level difference.
Review the manufacturer electrical-characteristics table for supply voltage, absolute maximum ratings, and external-component requirements before applying power. Use only the capacitor type, voltage rating, and ESR range specified for the chosen operating mode. Validate startup, brownout behavior, and fault shutdown in the complete converter or motor-control system because those conditions depend on the external power stage as well as the MCU.
Maklumat Kesediaan
The product is identified as an industrial microcontroller. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations are not stated in the product information and must be confirmed from the manufacturer documentation.