XMC4500F144F1024ACXQMA1 - 120MHz ARM MCU | Infineon
MPN: XMC4500F1024ACXQMA1 ✓ AktifXMC4500F1024ACXQMA1 Ringkasan
An Arm Cortex-M4 microcontroller is a 32-bit reduced-instruction-set processor within the broader embedded processor and semiconductor hierarchy. The Cortex-M4 architecture is designed for deterministic real-time control, efficient interrupt handling, and energy-efficient execution. Infineon positions the XMC4500 as an industrial member of the XMC4000 family, combining general-purpose embedded processing with communication and configurable peripherals rather than functioning merely as a general-purpose microcontroller.
The principal operating characteristics include a 120 MHz clock, 1 MB of flash organized as 1M x 8, 32-bit processing, and integrated Ethernet. Its 144-pin LQFP-13 package provides a high pin count suitable for parallel and digital interfaces. The manufacturer identifies the component as an industrial 32-bit microcontroller with an ARM Cortex-M4 core and 1024 kByte of flash. These characteristics distinguish it from smaller Cortex-M devices that offer fewer pins, less flash, or no integrated Ethernet.
The XMC4500 family uses a configurable peripheral concept, allowing designers to tailor the device around communication, timing, serial, and application-specific control requirements. Its Ethernet capability makes the MCU suitable for networked industrial equipment without requiring a separate communications controller. Software development is supported through the Infineon XMC ecosystem and DAVE configuration tooling. Firmware designers should use the XMC4500 reference manual together with the manufacturer datasheet when assigning peripheral functions, pins, clocks, and interrupts.
Typical applications include industrial Ethernet switches, motor and motion controllers, factory automation nodes, building automation interfaces, connected sensors, industrial communications equipment, and embedded gateway platforms. For designs requiring more program storage than a 768 kByte alternative, the 1 MB configuration provides additional code and data headroom. For designs whose software organization depends on an external memory interface instead of the F-series internal flash interface, the K-series device may require firmware and board-level review before substitution.
A critical implementation consideration is the exposed-pad connection. Infineon specifies that all VSS, VSSA, and VSSO pins share a common ground potential and that the exposed die pad in applicable packages must also connect to common ground. The PCB should therefore provide a low-impedance ground plane, adequate thermal-via distribution, and decoupling close to the supply pins. Pin multiplexing and alternate-function selection must be checked in the datasheet pin table before finalizing the board.
This page combines the manufacturer product information, datasheet, reference manual, distributor availability records, and carefully qualified same-package alternatives. It also organizes the device for industrial design decisions by covering the Cortex-M4 architecture, 120 MHz performance, 1 MB flash, Ethernet integration, common-ground construction, and the engineering checks required for an LQFP-144 migration.
Pilihan pengganti yang segera untuk XMC4500F1024ACXQMA1 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera XMC4500F1024ACXQMA1 (sama faktor bentuk dan kaki) — berbeza dalam Flash Memory, Supply Voltage.
XMC4500-F144K1024-AC
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
XMC4500E144X1024ACXQSA1
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →XMC4500F144F768ACXQMA1
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
XMC4500F1024ACXQMA1 Penilaian maksimum & Ciri-ciri Elektrik
| Product Type | 32-bit industrial microcontroller |
| Processor Core | ARM Cortex-M4 |
| Architecture | 32-bit RISC |
| Frekuensi Klock Maksimum | 120 MHz |
| Flash Memory | 1 MB (1M x 8) |
| Ethernet Connectivity | Integrated |
| Tegangan Pemberi Arus | 1.3 V and 3.3 V |
| Kemasan | PG-LQFP-144-13 |
| Kiraan Pin | 144 pins |
| Jenis Pemasangan | Surface mount |
| Core Architecture | ARM Cortex-M4 |
| Peripheral Configuration | Configurable peripheral set |
| Programming Tool | Infineon DAVE and XMC software tools |
| Industrial Classification | Industrial |
Panduan Konfigurasi Pin XMC4500F1024ACXQMA1 pg-lqfp-144-13
Konfigurasi pin untuk XMC4500F1024ACXQMA1 (pg-lqfp-144-13 pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk XMC4500F1024ACXQMA1.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
XMC4500F1024ACXQMA1 patut untuk 6 aplikasis: Industrial Ethernet Controllers, Factory Automation Systems, Motor and Motion Control, Building Automation Equipment, Connected Sensor Gateways, Industrial Communication Equipment.
Industrial Ethernet Controllers
The XMC4500F144F1024ACXQMA1 fits industrial Ethernet controllers because its 120 MHz ARM Cortex-M4 core supports responsive protocol processing while integrated Ethernet eliminates the need for a separate network controller. The 1 MB flash provides additional room for TCP/IP stacks, diagnostics, configuration data, and application firmware. Its 144-pin package also exposes substantially more I/O than a low-pin-count microcontroller, allowing status indicators, local controls, and industrial interfaces to coexist. During hardware design, assign Ethernet and PHY-support pins from the manufacturer pin table, maintain a continuous ground plane, and decouple each supply group close to its pins. The result is a compact industrial control platform suitable for protocol gateways, network switches, remote I/O, and connected automation equipment.
Disebarkan
Factory Automation Systems
The XMC4500F144F1024ACXQMA1 is well suited to factory automation because a 120 MHz Cortex-M4 core combines deterministic control performance with 1 MB of embedded program storage. Integrated Ethernet supports supervisory networks, while the 144-pin package can accommodate digital I/O, serial channels, timers, and communication interfaces required by machine controllers. The device can run motion, safety-adjacent monitoring, diagnostics, and communications without relying on a separate processor. Designers should use the manufacturer configuration tables to avoid assigning conflicting functions, preserve common ground between VSS, VSSA, and VSSO, and place the exposed-pad vias for effective heat removal. This configuration supports compact PLC modules, production-line controllers, and industrial data-acquisition gateways.
Disebarkan
Motor and Motion Control
The XMC4500F144F1024ACXQMA1 can serve as the central controller in industrial motor and motion-control equipment where fast peripheral handling, communication, and program capacity are valuable. Its 120 MHz Cortex-M4 core executes control logic while the configurable peripheral set supports timing, serial communication, and application-specific interfaces. The 144-pin package provides enough connections for encoder inputs, control signals, communications, and diagnostic functions, while 1 MB of flash accommodates control algorithms, parameter tables, and field-upgrade logic. Keep high-current motor switching circuitry separate from sensitive control grounds, use isolation where required by the machine architecture, and follow the datasheet decoupling recommendations. This arrangement is appropriate for stepper and brushless-motor controllers, actuator modules, and compact motion platforms.
Disebarkan
Building Automation Equipment
The XMC4500F144F1024ACXQMA1 is applicable to building automation controllers that coordinate HVAC equipment, lighting, access controls, and field sensors over an industrial network. Ethernet integration supports wired building systems, the 120 MHz Cortex-M4 core supports protocol handling and local logic, and 1 MB of flash leaves room for multiple device drivers and configuration storage. Its 144-pin pin count permits integration of local inputs, relay-control outputs, serial sensors, and status feedback without requiring another microcontroller. Layout should separate field-wired interfaces from precision analog and communications sections, preserve a low-impedance common-ground network, and use the exposed pad as both a thermal and ground connection. The resulting controller can serve room controllers, gateways, or centralized building-management equipment.
Disebarkan
Connected Sensor Gateways
The XMC4500F144F1024ACXQMA1 works well in connected sensor gateways that aggregate measurements and deliver them through Ethernet. Its 120 MHz ARM Cortex-M4 core can handle network stacks and local filtering concurrently, while 1 MB of flash provides room for protocol handlers, device descriptions, calibration data, and firmware updates. The high pin count supports external sensors, digital interfaces, status controls, and expansion ports in one industrial package. Use separate supply paths where analog sensor circuitry requires independent filtering, route Ethernet and switching-node signals away from sensitive inputs, and follow the manufacturer common-ground requirements for VSS, VSSA, VSSO, and the exposed pad. Such a design can serve environmental monitoring, vibration monitoring, industrial telemetry, and remote asset-tracking gateways.
Disebarkan
Industrial Communication Equipment
The XMC4500F144F1024ACXQMA1 targets industrial communication equipment requiring networking, deterministic control, and a substantial peripheral set. The 120 MHz Cortex-M4 core supports protocol conversion and real-time packet handling, while integrated Ethernet provides the primary network interface and 1 MB of flash stores firmware and configuration. The 144-pin package enables local serial channels, digital status, and administration interfaces alongside the network function. Designers should allocate pins through the manufacturer alternate-function tables, maintain short return paths for communications signals, and isolate external interfaces where surge or ground-potential differences are possible. The architecture is appropriate for protocol converters, industrial communication masters, network-facing sensor controllers, and machine-to-enterprise gateway platforms.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk XMC4500F1024ACXQMA1 — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | XMC4500-F144K1024-AC | XMC4500E144X1024ACXQSA1 | XMC4500F144F768ACXQMA1 |
|---|---|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Package | PG-LQFP-144-13 | LQFP-144 | LQFP-144 | LQFP-144 |
| Flash Memory | 1024 kByte | 1024 kByte | 1024 kByte | 768 kByte |
| Memory Interface Code | F series | K series | E series | F series |
| Program Storage Difference | Baseline 1024 kByte | Same nominal flash; interface code differs | Same nominal flash; series code differs | 256 kByte less flash, 25% reduction |
Penyeberangsung Jelas
- Largest documented flash capacity among the compared direct family options (vsXMC4500F144F768ACXQMA1)
- Target F-series configuration avoids the K-series external-memory-interface transition (vsXMC4500-F144K1024-AC)
- High integration reduces the need for external Ethernet and control components (vsXMC4500E144X1024ACXQSA1)
Catatan Desain
Connect the exposed die pad to the common ground net using a solid connection to the ground plane and an array of thermal and electrical vias. Infineon specifies that VSS, VSSA, and VSSO share one ground potential and that the exposed pad must also join common ground. Place supply-decoupling capacitors close to their associated pins, route high-current outputs away from communications and analog pins, and preserve continuous ground paths beneath the device.
Do not assume that every 144-pin XMC4500 ordering code is a firmware-compatible substitute. The F, K, and E series designations can describe different memory organizations or interfaces, and the trailing ordering codes can affect qualification and packing. Before replacing XMC4500F144F1024ACXQMA1, compare the ordering-information table, memory architecture, boot configuration, pin multiplexing, electrical limits, temperature grade, and exposed-pad requirements against the exact alternative.
Use the manufacturer pin and alternate-function tables before assigning the 144 available pins. Reserve debug and programming access, verify that every power pin receives local decoupling, and keep Ethernet or other high-speed interfaces routed over a continuous reference plane. Because the device exposes many mixed-signal and digital functions, avoid long shared traces between noisy outputs and precision inputs. Review the reference design and pin descriptions when reproducing the original board or creating a new layout.
Treat the exposed pad as a principal heat-spreading and grounding structure rather than an optional copper feature. Provide multiple vias near the pad, keep via current paths consistent with the ground topology, and avoid thermal isolation by long neck traces or fragmented planes. Validate junction temperature in the final enclosure because the ambient temperature, copper area, adjacent heat sources, and switching activity of the surrounding circuit affect the temperature rise achieved by the LQFP package.
Maklumat Kesediaan
The part is identified as an industrial microcontroller, but no explicit RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive-qualification declaration was included. Request the current manufacturer declarations for the exact ordering code. AEC-Q100 is not applicable to the stated industrial classification unless a separate automotive qualification is established.