CuprumFlow Graphics adds HD UI to MCU projects without an OS
Two 50x26 mm boards - one CPU, one FPGA - drive 1920x1080 or 1366x768 panels over LVDS, eDP, DVI, or VGA for bare-metal embedded UIs.
Component sourcing news
What changed today, why it matters for your BOM, and what to watch. Every factual claim is traceable to the source it came from; our own analysis is labelled and kept separate.
EN · single language Editorial policy
Source sanity (S1)
Fetched in last 24 h181
Clean prose5969
Rejected before any model call563
Bad-source rate9%
Gate (spec v2.9)
Pass85
Hold (human review)383
Reject69
Release rate16%
Publishing volume
Today / daily limit7 / 10
Sensitive-topic escalations0
Auto-publishOff (shadow period)
Negotiator II Turns USB-C Chargers Into 48 V, 5 A Bench Supplies in a 2 mm Card
An open-source business-card device negotiates USB PD 3.1 up to 48 V, displays live V/I/W, and exposes a browser console for bench use.
Micron Taoyuan strike vote signals tighter DRAM supply, more SBC price hikes
Micron's Taiwan union has voted 99-to-1 to authorize a strike over profit sharing. With DRAM demand already outstripping supply into 2028, design and procurement teams should brace for further memory cost pressure.
MediaTek Dimensity CX C10 Max: what the 3nm octa-core SoC means for Googlebook designs and component sourcing
MediaTek's first Dimensity CX C10 Max targets Google's new Googlebook laptop line, pairing a 3nm all-big-core CPU with a 55 TOPS NPU.
Quectel SE200ZC-AP module: five-camera Rockchip RV1126B design for vision BOMs
Quectel SE200ZC-AP module pairs Rockchip RV1126B/BJ SoC with a 3 TOPS NPU and up to five 12MP cameras for vision BOMs in security, robotics, and industrial lines.
LILYGO T-Dongle-C5 brings dual-band WiFi 6 and 802.15.4 to a USB-A dongle form factor
LILYGO's T-Dongle-C5 upgrades the T-Dongle-S3 with ESP32-C5 RISC-V silicon, 16MB flash, 8MB PSRAM, microSD, optional OLED and a Qwiic connector.
Walnut Pi CM2 targets Raspberry Pi CM5 sockets at lower cost with Allwinner T527
Walnut Pi has launched a CM5-footprint Compute Module built on the Allwinner T527 octa-core Cortex-A55, with up to 4GB LPDDR4, 16GB eMMC, WiFi 6, and a 2 TOPS NPU.
DSPi firmware turns RP2040/RP2350 boards into USB sound cards with onboard DSP
Open-source DSPi firmware lets Raspberry Pi Pico and Pico 2 act as a USB sound card with parametric EQ, crossovers, and up to 8 output channels.
ATX Conversion Kit Lets Designers Repurpose 2019 Mac Pro 'Cheesegrater' Chassis for Standard PC Hardware
Stefan Bond's Kickstarter kit swaps the Mac Pro 7,1 proprietary internals for ATX motherboards, full-length GPUs, and air or 240mm AIO cooling, without permanently modifying the case.
Littelfuse exits MCUs entirely: Zilog eZ80 and remaining lines head to EOL
Littelfuse has issued an end-of-life notice for all remaining Zilog microcontroller families, with final orders by December 21 and shipments through June 2027.
Gadget Industry DIY Power Station: 500W Output from a One-Hand LiFePO4 Build
A YouTuber built a hand-held power station with a 300W AC inverter, 140W and 65W USB-C ports, and four LiFePO4 cells rated at 3C discharge.
Ring Smart Lock adds hand-crank backup; Sidewalk IoT link and Alexa tie-in reshape dead-battery scenario
Ring's first smart lock uses a hand-crank generator for dead-battery recovery, runs over Amazon Sidewalk instead of Wi-Fi, and ships in early 2027 pending FCC clearance.
About the data on this page. Charts on this site are native SVG data visualisations built from verified data held on this site; there are no decorative illustrations and no hot-linked third-party images.
Get the daily brief
One email per publishing day. You can also add XAIPART as a preferred source in Google.