Analog Devices

AD602AR - Dual 35MHz Variable Gain Amplifier | Analog Devices

MPN: AD602AR ✓ Active
16-pin SOIC Package
MOQ: 1 |

AD602AR Overview

The Analog Devices AD602AR is a dual-channel, low-noise, wideband variable gain amplifier with independent gain controls, a 0 dB to 42.14 dB adjustment range, and a 32 dB/V gain-control scaling factor. The device is packaged in a 16-pin SOIC and is optimized for ultrasound imaging systems, while its low noise and distortion characteristics also suit instrumentation and other precision analog signal chains.

A variable gain amplifier is an amplifier whose gain can be adjusted by an external control voltage. It belongs to the signal-conditioning hierarchy that includes fixed-gain amplifiers, attenuators, amplifiers, analog front ends, and mixed-signal processing ICs. In an ultrasound receiver, such an amplifier compensates for the large variation in echo strength caused by tissue depth and interface impedance, allowing downstream circuitry to operate within a more consistent signal range.

Each AD602 channel contains a voltage-controlled attenuator followed by a fixed-gain amplifier. The manufacturer describes the two channels as independent, with separate control interfaces and a gain-control scaling factor of 32 dB/V. The stated 0 dB to 42.14 dB range allows substantial received-signal attenuation without requiring the system to switch between separate amplifier paths. A listed bandwidth of 35 MHz supports demanding ultrasound and instrumentation signal paths while retaining voltage-controlled gain adjustment.

The AD602AR uses an industrial temperature grade, with the AD602A family specified for operation from -40°C to +85°C. Its 16-pin SOIC package provides a conventional surface-mount footprint that can be assembled with standard production equipment. Although the SOIC package is larger than a modern QFN, it simplifies prototype assembly, inspection, and rework and is appropriate for instruments and medical-imaging equipment where assembly reliability and serviceability are important.

Typical applications include ultrasound receiver channels, medical diagnostic imaging, ultrasound instrumentation, programmable test and measurement systems, and precision analog front ends. In an ultrasound system, the AD602AR can attenuate a weak echo before a fixed-gain stage, helping the downstream converter retain usable dynamic range. The dual-channel architecture allows two receive paths to be controlled independently or together, reducing the number of separate gain-control components required on a multi-channel board.

When designing around the AD602AR, account for the control-voltage range, attenuation-versus-frequency response, output swing, and noise contribution of the complete receiver chain. Place decoupling capacitors close to the supply pins and keep high-speed analog traces short and away from digital and switching-current paths. Confirm the required gain range against the maximum control voltage and verify that downstream ADC or display circuitry retains adequate headroom. The AD602AR is also the basis for the closely related AD600 family, which uses a different voltage-controlled-attenuator scaling factor.

Drop-in alternatives for AD602AR — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with AD602AR (same form factor and footprint) — differing in Package, Amplifier Type, Operating Temperature, Product Type.

Analog Devices
Package: 16-lead SOIC
Amplifier Type: Dual voltage-controlled variable gain amplifier
Compare with AD602AR →
Analog Devices
Package: 16-lead SOIC
Product Type: Dual variable gain amplifier
Compare with AD602AR →
Analog Devices
Package: 16-lead SOIC
Amplifier Type: Dual-channel variable gain amplifier
Operating Temperature: 0°C to +70°C
Compare with AD602AR →

AD602JRZ

✅ Drop-In
Analog Devices
📦 16-lead SOIC
Dual-channel variable gain amplifier · 2 channels · −10 dB to +30 dB per channel · 31.07 dB · 35 MHz nominal · Nominally independent of gain · Up to +5.25 V · Down to −5.25 V

Contact for price

View Datasheet →

AD600AR

✅ Drop-In
📦 16-lead SOIC
AD600 family uses a different gain-control scaling factor than the AD602AR's 32 dB/V, requiring different control-voltage calculations

📋 Reference alternative (not in catalog)

AD600JRZ

✅ Drop-In
Analog Devices
📦 16-lead SOIC
Dual voltage-controlled variable gain amplifier · 2 channels · 2 amplifiers · Analog voltage control · 35 MHz · ±4.75 V to ±5.25 V · 9.5 V to 10.5 V · 0°C to 70°C

Contact for price

View Datasheet →

AD602AR Maximum Ratings & Electrical Characteristics

Product Type Dual-channel variable gain amplifier
Number of Channels 2 channels
Gain Adjustment Range 0 dB to 42.14 dB
Gain Control Scaling Factor 32 dB/V
Bandwidth 35 MHz
Independent Control Interfaces 1 per channel
Internal Attenuator Voltage-controlled, 0 dB to 42.14 dB
Signal Path Voltage-controlled attenuator followed by fixed-gain amplifier
Package 16-pin SOIC
Mounting Type Surface mount
Operating Temperature -40°C to +85°C
Intended Application Ultrasound imaging and instrumentation

AD602AR 16-pin soic Pin Configuration Guide

Pin configuration for AD602AR (16-pin soic package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.

16-pin soic package pinout diagram for AD602AR

No detailed pinout data available for AD602AR.

Refer to the datasheet for full pin configuration.

Typical Applications

AD602AR is suitable for 6 applications: Ultrasound Receive Channels, Medical Diagnostic Imaging, Programmable Test Instrumentation, Precision Analog Signal Conditioning, Dual-Channel RF Signal Front Ends, Industrial Sensor Interfacing.

💊

Ultrasound Receive Channels

The AD602AR fits ultrasound receive channels because each channel offers independent, continuously controlled attenuation over a 0 dB to 42.14 dB range with a 32 dB/V scaling factor. Its 35 MHz bandwidth preserves the frequency content needed for high-resolution echo acquisition. Place each channel between the receive transducer or front-end network and the fixed-gain stage, then derive the control voltage from the receiver’s time-gain-control system. This architecture accommodates the large amplitude variation between shallow and deep echoes while keeping the downstream converter input within a predictable range.

💊

Medical Diagnostic Imaging

The AD602AR supports medical diagnostic imaging front ends that require accurate, programmable signal attenuation before digitization. Its dual-channel organization allows two receive paths to be adjusted independently, while the 0 dB to 42.14 dB range compensates for widely varying sensor and tissue responses. The 35 MHz bandwidth is suitable for high-speed ultrasound signal chains, and the industrial-temperature AD602A grade is specified for -40°C to +85°C operation. Designers should evaluate total input-referred noise, harmonic distortion, and output settling against the complete diagnostic-imaging signal chain.

🔧

Programmable Test Instrumentation

The AD602AR is useful in programmable test and measurement systems that need accurate channel-dependent attenuation without switching between discrete fixed-gain paths. The 32 dB/V control scaling provides a straightforward relationship between a control voltage and requested gain, while independent channel controls support two-channel instruments. Its 35 MHz bandwidth accommodates high-speed analog measurements, but the selected operating gain and control voltage must be checked against the frequency-dependent bandwidth and distortion curves. Short analog traces and local supply decoupling help preserve the intended low-noise behavior.

⚡

Precision Analog Signal Conditioning

The AD602AR can serve as the programmable attenuation element in a precision analog front end when the input amplitude varies over a wide range. The dual-channel structure permits differential or unrelated signal paths to be controlled separately, and the 0 dB to 42.14 dB range provides useful adjustment without requiring multiple switched gain stages. The 35 MHz bandwidth supports fast analog signals, but system-level performance also depends on output swing, noise, distortion, and settling. Use the manufacturer gain-control and electrical-characteristics curves when selecting operating ranges.

🌐

Dual-Channel RF Signal Front Ends

The AD602AR is applicable to dual-channel RF signal front ends that require rapid attenuation under software or system control. Its 35 MHz bandwidth is suitable for signals within that band, and its 32 dB/V scaling can provide predictable control over a 0 dB to 42.14 dB gain-adjustment interval. Place the amplifier where the source impedance and cable losses are accounted for, and maintain short connections to the preceding RF network. Verify input impedance, output impedance, stability, and permissible control-voltage limits for the particular operating condition.

🏭

Industrial Sensor Interfacing

The AD602AR fits industrial sensor interfaces whose analog output changes substantially with stimulus level, process condition, or sensor distance. Independent channel controls allow two sensors or two stages to be normalized without changing fixed-gain circuitry, while the 35 MHz bandwidth covers many fast-response industrial signals. The AD602AR industrial-temperature grade operates from -40°C to +85°C, making it suitable for temperature-varying environments when other system requirements are met. Validate sensor bandwidth, amplifier noise, distortion, and control-voltage settling over the complete environmental range.

What is the AD602AR?
The AD602AR is a dual-channel, low-noise, wideband variable gain amplifier from Analog Devices. According to the AD600/AD602 manufacturer datasheet, each channel combines a voltage-controlled attenuator with a fixed-gain amplifier, provides independent gain control, supports a 0 dB to 42.14 dB gain-adjustment range, and uses a 32 dB/V scaling factor. The component is packaged in a 16-pin SOIC for ultrasound, medical-imaging, instrumentation, and precision analog applications.
What is the gain range and control sensitivity of AD602AR?
The AD602AR provides a 0 dB to 42.14 dB gain-adjustment range with a 32 dB/V control scaling factor. According to the Analog Devices AD600/AD602 datasheet, this range is implemented through a voltage-controlled attenuator in each independently controlled channel. The combination lets an ultrasound receiver attenuate weak or strong echoes continuously rather than switching among several fixed-gain paths, while retaining control resolution determined by the applied control voltage.
What is the bandwidth of AD602AR?
The AD602AR has a listed bandwidth of 35 MHz. According to the manufacturer product information and AD600/AD602 datasheet, the device is a wideband, dual-channel variable gain amplifier designed for ultrasound imaging and other applications requiring precise gain, low noise, low distortion, and wide bandwidth. Confirm the gain-dependent bandwidth and output-swing limits for the selected operating point in the manufacturer datasheet before setting a system bandwidth target.
Where can I download the AD602AR datasheet PDF?
The official AD602AR datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/AD600_602.pdf. The document covers the AD600 and AD602 dual, low-noise, wideband variable gain amplifier family. It is the appropriate source for the complete electrical characteristics, gain-control curves, pin descriptions, application information, and ordering table. Request a Quote on this page when purchasing the AD602AR.
Where can I find the AD602AR pinout?
The AD602AR pinout is shown in the AD600/AD602 manufacturer datasheet at https://www.analog.com/media/en/technical-documentation/data-sheets/AD600_602.pdf. The AD602AR uses a 16-pin SOIC package, so verify every signal, control, supply, and ground connection against the pin-description table before laying out a PCB. Use the package drawing for land-pattern dimensions and the pin table for electrical assignments; do not infer connectivity from amplifier-family conventions.
Is AD602AR suitable for ultrasound imaging?
The AD602AR is suitable for ultrasound imaging because it is specifically optimized for that application. According to the Analog Devices AD600/AD602 datasheet, the two independent channels provide precise, voltage-controlled attenuation over a 0 dB to 42.14 dB range with 32 dB/V scaling. The 35 MHz bandwidth supports high-speed receive paths, while low noise and distortion help preserve weak echo information before digitization.
What is the difference between AD602AR and AD602JRZ?
The AD602AR and AD602JRZ are both members of the AD602 family, but they represent different ordering and temperature-grade choices. The manufacturer comparison identifies the AD602AR as the industrial AD602A version in SOIC, specified from -40°C to +85°C, while AD602JRZ is associated with the AD602J grade specified from 0°C to +70°C. Both use a 16-lead SOIC format, making the main functional distinction the temperature specification rather than the basic amplifier architecture.
When should I choose AD602AR over AD600AR?
Choose the AD602AR when the design specifically requires its 32 dB/V gain-control scaling factor and the corresponding 0 dB to 42.14 dB adjustment behavior. The AD600 family uses a different scaling factor for its voltage-controlled attenuator, so its control-voltage calculations and system gain plan are not interchangeable without review. Both families serve ultrasound and wideband instrumentation, but the correct choice depends on the required gain-control slope, signal bandwidth, and existing analog front-end design.
What is the best drop-in replacement for AD602AR?
The closest documented same-footprint replacement is the AD602JRZ because it uses the same 16-lead SOIC format and retains the AD602 variable-gain-amplifier architecture, but it is limited to 0°C to +70°C rather than the AD602AR’s -40°C to +85°C range. Confirm the complete electrical characteristics and production requirements before substitution. No manufacturer-specific cross-brand replacement was established, so an unverified part should not be treated as a drop-in replacement.
Can AD602JRZ replace AD602AR?
The AD602JRZ can be considered only when the required ambient temperature stays within its 0°C to +70°C specification. Both devices use a 16-lead SOIC package, but the AD602AR is an AD602A-grade industrial-temperature part specified from -40°C to +85°C. The replacement is therefore unsuitable for extended cold operation unless its temperature behavior and other ordering-specific characteristics are verified against the complete manufacturer datasheet and qualification requirements.
Where can I buy AD602AR and what is its price?
Use the Request a Quote form on this page to obtain current AD602AR availability, unit pricing, order quantity, and lead time. The visible pricing area is updated independently from the technical product data, so engineers should submit the exact suffix AD602AR rather than AD602AR-REEL7 or a family-level order code. Current commercial terms should always be confirmed before committing a production bill of materials or scheduling an assembly build.
How much lead time is available for AD602AR?
Current lead time and available production quantity should be requested through the Request a Quote form on this page. The manufacturer product page provides the AD602 family ordering information, while the AD602AR suffix identifies the specific 16-pin SOIC industrial-temperature configuration. For schedule planning, provide the required annual volume, forecast horizon, and target delivery date so that allocation and packaging requirements can be confirmed against the exact MPN.
Is AD602AR in stock?
AD602AR availability changes with demand, so use the Request a Quote form on this page for the current stock position. Submit the exact AD602AR MPN and specify reel, tray, or other required packaging along with the target quantity. The manufacturer offers the AD602 family through its sample-and-buy channel, and authorized regional supply can confirm the exact suffix, date code, and delivery schedule.
What are the key specifications of AD602AR that engineers should know?
The key AD602AR specifications are its dual independent channels, 35 MHz bandwidth, 0 dB to 42.14 dB gain-adjustment range, 32 dB/V gain-control scaling factor, and 16-pin SOIC package. According to the Analog Devices AD600/AD602 datasheet, the device also supports an industrial-temperature version rated from -40°C to +85°C. These features make it suitable for ultrasound receive channels and other precision, programmable-gain instrumentation.
What are the best Analog Devices equivalents for AD602AR?
The closest Analog Devices alternatives are AD602JRZ for a lower-temperature SOIC implementation and AD600AR from the related AD600 family. The AD602JRZ retains the 16-pin SOIC architecture but is specified from 0°C to +70°C, while AD600AR changes the voltage-controlled-attenuator scaling factor and therefore requires different control-voltage calculations. No cross-brand part was established as a verified pin-to-pin substitute for AD602AR.
How should the AD602AR gain-control voltage be designed?
Design the gain-control path around the AD602’s 32 dB/V scaling factor and its stated 0 dB to 42.14 dB adjustment range. According to the AD600/AD602 manufacturer datasheet, the maximum useful gain adjustment corresponds to a control-voltage excursion of approximately 1.317 V. Check that this control signal remains inside the device’s supported input range, add appropriate filtering, and account for DAC resolution, offset, drift, and noise when setting the receiver gain.

Engineering reference data for AD602AR — comparison, design guidance, and compliance information.

Selection Guide

Choose AD602AR for ultrasound, medical-imaging, instrumentation, or precision analog designs that require two independently controlled variable-gain channels, a documented 32 dB/V scaling factor, and operation from -40°C to +85°C. Choose AD602JRZ when the same 16-lead SOIC architecture and AD602 control scaling are required but the operating temperature remains between 0°C and +70°C. Consider AD600AR only after redesigning the gain-control voltage for the AD600 family's different scaling factor. Consider AD600JRZ for the AD600 control architecture with the narrower 0°C to +70°C range. In every case, verify the complete electrical characteristics, package drawing, gain-dependent bandwidth, output swing, noise, distortion, and qualification requirements before releasing a production design.

Comparison with Alternatives

Parameter This Product AD602JRZ AD600AR AD600JRZ
Package 16-lead SOIC 16-lead SOIC 16-lead SOIC 16-lead SOIC
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Product Family AD602 dual variable gain amplifier AD602 dual variable gain amplifier AD600 dual variable gain amplifier AD600 dual variable gain amplifier
Number of Channels 2 channels 2 channels 2 channels 2 channels
Gain-Control Scaling Factor 32 dB/V 32 dB/V Different AD600 scaling factor Different AD600 scaling factor
Operating Temperature -40°C to +85°C 0°C to +70°C -40°C to +85°C 0°C to +70°C
Independent Channel Control Yes Yes Yes Yes
Primary Application Ultrasound imaging and instrumentation Ultrasound imaging and instrumentation Ultrasound imaging and instrumentation Ultrasound imaging and instrumentation

Key Differentiators

  • Broader industrial temperature range than AD602JRZ (vs AD602JRZ)
  • Defined 32 dB/V gain-control scaling (vs AD600AR)
  • Wideband dual-channel gain adjustment (vs AD600JRZ)

Design Notes

Route the two gain-control inputs as short, isolated analog traces and keep them away from clocks, power-converter switches, and high-current return paths. Place the device close to the signal source and the downstream fixed-gain stage to minimize capacitance, coupling, and added noise. Use a solid ground plane, provide local supply bypassing at the IC pins, and verify the control-line impedance with the actual driver and cable configuration.

Calculate the required gain-control voltage from the documented 32 dB/V scaling factor, then verify that the requested point remains within the supported control-input range. Filter the control voltage when necessary, while checking that filtering does not slow channel-to-channel updates. At the maximum adjustment of 42.14 dB, the corresponding control excursion is approximately 1.317 V; treat this as an arithmetic design value rather than a substitute for the complete manufacturer characteristic.

Do not substitute the AD602 and AD600 families solely because both provide dual variable gain in a 16-lead SOIC. Their voltage-controlled-attenuator scaling factors differ, so a control-voltage value from one family cannot be copied directly to the other. Also confirm temperature grade: AD602AR is specified from -40°C to +85°C, while AD602JRZ is limited to 0°C to +70°C. Review gain-dependent bandwidth, output swing, noise, and distortion after any substitution.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The AD602AR is an industrial-temperature amplifier rather than an automotive-qualified AEC-Q100 device. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations should be confirmed from the current manufacturer product documentation.

Data verified on: 2026-11-14 — data verified and curated by XAIPART's component engineering team

Related Searches

AD602AR datasheet AD602AR pinout AD602AR datasheet pdf AD602AR equivalent AD602AR replacement AD602AR cross reference AD602AR vs AD602JRZ AD602AR vs AD600AR AD602AR 35MHz variable gain amplifier AD602AR 16-SOIC pinout AD602AR ultrasound amplifier Analog Devices AD602AR AD602AR price AD602AR stock

Related Components & Terms

Analog Devices AD602AR AD602JRZ AD600AR AD600JRZ variable gain amplifier VGA voltage-controlled attenuator fixed-gain amplifier dual-channel amplifier analog signal conditioning ultrasound imaging medical diagnostic imaging test and measurement gain-control scaling factor 32 dB/V 0 dB to 42.14 dB 35 MHz bandwidth 16-lead SOIC SOIC package family surface-mount package industrial temperature grade precision analog front end programmable gain
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details