AD602AR - Dual 35MHz Variable Gain Amplifier | Analog Devices
MPN: AD602AR ✓ نشطAD602AR نظرة عامة
A variable gain amplifier is an amplifier whose gain can be adjusted by an external control voltage. It belongs to the signal-conditioning hierarchy that includes fixed-gain amplifiers, attenuators, amplifiers, analog front ends, and mixed-signal processing ICs. In an ultrasound receiver, such an amplifier compensates for the large variation in echo strength caused by tissue depth and interface impedance, allowing downstream circuitry to operate within a more consistent signal range.
Each AD602 channel contains a voltage-controlled attenuator followed by a fixed-gain amplifier. The manufacturer describes the two channels as independent, with separate control interfaces and a gain-control scaling factor of 32 dB/V. The stated 0 dB to 42.14 dB range allows substantial received-signal attenuation without requiring the system to switch between separate amplifier paths. A listed bandwidth of 35 MHz supports demanding ultrasound and instrumentation signal paths while retaining voltage-controlled gain adjustment.
The AD602AR uses an industrial temperature grade, with the AD602A family specified for operation from -40°C to +85°C. Its 16-pin SOIC package provides a conventional surface-mount footprint that can be assembled with standard production equipment. Although the SOIC package is larger than a modern QFN, it simplifies prototype assembly, inspection, and rework and is appropriate for instruments and medical-imaging equipment where assembly reliability and serviceability are important.
Typical applications include ultrasound receiver channels, medical diagnostic imaging, ultrasound instrumentation, programmable test and measurement systems, and precision analog front ends. In an ultrasound system, the AD602AR can attenuate a weak echo before a fixed-gain stage, helping the downstream converter retain usable dynamic range. The dual-channel architecture allows two receive paths to be controlled independently or together, reducing the number of separate gain-control components required on a multi-channel board.
When designing around the AD602AR, account for the control-voltage range, attenuation-versus-frequency response, output swing, and noise contribution of the complete receiver chain. Place decoupling capacitors close to the supply pins and keep high-speed analog traces short and away from digital and switching-current paths. Confirm the required gain range against the maximum control voltage and verify that downstream ADC or display circuitry retains adequate headroom. The AD602AR is also the basis for the closely related AD600 family, which uses a different voltage-controlled-attenuator scaling factor.
بدائل مباشرة لـ AD602AR — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع AD602AR (نفس عامل الشكل والبصمة) — يختلف في Package, Amplifier Type, Operating Temperature, Product Type.
AD602JRZ
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←AD600AR
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
AD600JRZ
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←AD602AR الحدود القصوى والخصائص الكهربائية
| Product Type | Dual-channel variable gain amplifier |
| Number of Channels | 2 channels |
| Gain Adjustment Range | 0 dB to 42.14 dB |
| Gain Control Scaling Factor | 32 dB/V |
| Bandwidth | 35 MHz |
| Independent Control Interfaces | 1 per channel |
| Internal Attenuator | Voltage-controlled, 0 dB to 42.14 dB |
| Signal Path | Voltage-controlled attenuator followed by fixed-gain amplifier |
| العلبة | 16-pin SOIC |
| نوع التركيب | Surface mount |
| درجة حرارة التشغيل | -40°C to +85°C |
| Intended Application | Ultrasound imaging and instrumentation |
دليل تكوين أطراف AD602AR 16-pin soic
تكوين الأطراف لـ AD602AR (حزمة 16-pin soic). يتميز هذا المكوّن التناظري بأطراف الإدخال والإخراج وإمداد الطاقة. راجع ورقة بيانات الشركة المصنعة لتكوينات طرف إلغاء الإزاحة والتعويض والتمكين. مثالي لدوائر تكييف الإشارة والمضخمات.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ AD602AR.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
AD602AR مناسب لـ 6 التطبيقs: Ultrasound Receive Channels, Medical Diagnostic Imaging, Programmable Test Instrumentation, Precision Analog Signal Conditioning, Dual-Channel RF Signal Front Ends, Industrial Sensor Interfacing.
Ultrasound Receive Channels
The AD602AR fits ultrasound receive channels because each channel offers independent, continuously controlled attenuation over a 0 dB to 42.14 dB range with a 32 dB/V scaling factor. Its 35 MHz bandwidth preserves the frequency content needed for high-resolution echo acquisition. Place each channel between the receive transducer or front-end network and the fixed-gain stage, then derive the control voltage from the receiver’s time-gain-control system. This architecture accommodates the large amplitude variation between shallow and deep echoes while keeping the downstream converter input within a predictable range.
موصى به
Medical Diagnostic Imaging
The AD602AR supports medical diagnostic imaging front ends that require accurate, programmable signal attenuation before digitization. Its dual-channel organization allows two receive paths to be adjusted independently, while the 0 dB to 42.14 dB range compensates for widely varying sensor and tissue responses. The 35 MHz bandwidth is suitable for high-speed ultrasound signal chains, and the industrial-temperature AD602A grade is specified for -40°C to +85°C operation. Designers should evaluate total input-referred noise, harmonic distortion, and output settling against the complete diagnostic-imaging signal chain.
موصى به
Programmable Test Instrumentation
The AD602AR is useful in programmable test and measurement systems that need accurate channel-dependent attenuation without switching between discrete fixed-gain paths. The 32 dB/V control scaling provides a straightforward relationship between a control voltage and requested gain, while independent channel controls support two-channel instruments. Its 35 MHz bandwidth accommodates high-speed analog measurements, but the selected operating gain and control voltage must be checked against the frequency-dependent bandwidth and distortion curves. Short analog traces and local supply decoupling help preserve the intended low-noise behavior.
موصى به
Precision Analog Signal Conditioning
The AD602AR can serve as the programmable attenuation element in a precision analog front end when the input amplitude varies over a wide range. The dual-channel structure permits differential or unrelated signal paths to be controlled separately, and the 0 dB to 42.14 dB range provides useful adjustment without requiring multiple switched gain stages. The 35 MHz bandwidth supports fast analog signals, but system-level performance also depends on output swing, noise, distortion, and settling. Use the manufacturer gain-control and electrical-characteristics curves when selecting operating ranges.
موصى به
Dual-Channel RF Signal Front Ends
The AD602AR is applicable to dual-channel RF signal front ends that require rapid attenuation under software or system control. Its 35 MHz bandwidth is suitable for signals within that band, and its 32 dB/V scaling can provide predictable control over a 0 dB to 42.14 dB gain-adjustment interval. Place the amplifier where the source impedance and cable losses are accounted for, and maintain short connections to the preceding RF network. Verify input impedance, output impedance, stability, and permissible control-voltage limits for the particular operating condition.
موصى به
Industrial Sensor Interfacing
The AD602AR fits industrial sensor interfaces whose analog output changes substantially with stimulus level, process condition, or sensor distance. Independent channel controls allow two sensors or two stages to be normalized without changing fixed-gain circuitry, while the 35 MHz bandwidth covers many fast-response industrial signals. The AD602AR industrial-temperature grade operates from -40°C to +85°C, making it suitable for temperature-varying environments when other system requirements are met. Validate sensor bandwidth, amplifier noise, distortion, and control-voltage settling over the complete environmental range.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ AD602AR — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | AD602JRZ | AD600AR | AD600JRZ |
|---|---|---|---|---|
| Package | 16-lead SOIC | 16-lead SOIC | 16-lead SOIC | 16-lead SOIC |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Product Family | AD602 dual variable gain amplifier | AD602 dual variable gain amplifier | AD600 dual variable gain amplifier | AD600 dual variable gain amplifier |
| Number of Channels | 2 channels | 2 channels | 2 channels | 2 channels |
| Gain-Control Scaling Factor | 32 dB/V | 32 dB/V | Different AD600 scaling factor | Different AD600 scaling factor |
| Operating Temperature | -40°C to +85°C | 0°C to +70°C | -40°C to +85°C | 0°C to +70°C |
| Independent Channel Control | Yes | Yes | Yes | Yes |
| Primary Application | Ultrasound imaging and instrumentation | Ultrasound imaging and instrumentation | Ultrasound imaging and instrumentation | Ultrasound imaging and instrumentation |
أبرز الفروقات
- Broader industrial temperature range than AD602JRZ (مقابلAD602JRZ)
- Defined 32 dB/V gain-control scaling (مقابلAD600AR)
- Wideband dual-channel gain adjustment (مقابلAD600JRZ)
ملاحظات التصميم
Route the two gain-control inputs as short, isolated analog traces and keep them away from clocks, power-converter switches, and high-current return paths. Place the device close to the signal source and the downstream fixed-gain stage to minimize capacitance, coupling, and added noise. Use a solid ground plane, provide local supply bypassing at the IC pins, and verify the control-line impedance with the actual driver and cable configuration.
Calculate the required gain-control voltage from the documented 32 dB/V scaling factor, then verify that the requested point remains within the supported control-input range. Filter the control voltage when necessary, while checking that filtering does not slow channel-to-channel updates. At the maximum adjustment of 42.14 dB, the corresponding control excursion is approximately 1.317 V; treat this as an arithmetic design value rather than a substitute for the complete manufacturer characteristic.
Do not substitute the AD602 and AD600 families solely because both provide dual variable gain in a 16-lead SOIC. Their voltage-controlled-attenuator scaling factors differ, so a control-voltage value from one family cannot be copied directly to the other. Also confirm temperature grade: AD602AR is specified from -40°C to +85°C, while AD602JRZ is limited to 0°C to +70°C. Review gain-dependent bandwidth, output swing, noise, and distortion after any substitution.
معلومات الامتثال
The AD602AR is an industrial-temperature amplifier rather than an automotive-qualified AEC-Q100 device. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations should be confirmed from the current manufacturer product documentation.