AD704JR-16 - Low-Power Quad Picoamp Op Amp | Analog Devices
MPN: AD704JR-16 ✓ ActiveAD704JR-16 Overview
An operational amplifier is a high-gain, differential-input analog amplifier used to amplify, buffer, filter, or compare small voltage signals. Within the semiconductor hierarchy, the AD704 belongs to the operational-amplifier and signal-conditioning IC category. Its superbeta bipolar input stage is designed for picoampere input bias current at room temperature while maintaining substantially better bias-current stability than conventional BiFET input stages as temperature rises.
The AD704 family provides four amplifiers in each package, a useful integration advantage for multi-channel sensor systems. According to Analog Devices, the input bias current typically increases by only 5× at 125°C, whereas a BiFET amplifier can exhibit substantially greater temperature-related change. The low power design also makes the AD704 suitable for portable instrumentation and precision measurement systems where amplifier bias current can create measurement errors or consume unnecessary energy.
Common uses include low-level sensor amplification, current-to-voltage conversion, bridge excitation, precision filtering, buffering, and signal conditioning. Its picoampere input bias current is especially useful with high-impedance sources because input leakage can shift the signal voltage and corrupt the measurement. Four amplifiers in one package can simplify multichannel designs while reducing board area compared with four separate single amplifier packages.
The main design consideration is the trade-off between very low input bias current and the noise, offset, bandwidth, and supply requirements of the bipolar amplifier architecture. The input common-mode range, output swing, and supply limits must be checked against the intended signal range. Decoupling capacitors should be placed close to the supply pins, and sensitive analog traces should be kept away from high-current switching paths to minimize coupled interference.
This product page combines the AD704 family characteristics, ordering information, sourcing guidance, and practical design considerations in one place. It also distinguishes the exact AD704JR-16 orderable device from related packaging and grade designations so engineers can confirm the correct part before beginning a PCB layout or production BOM.
Drop-in alternatives for AD704JR-16 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with AD704JR-16 (same form factor and footprint) — differing in Amplifier Type, Number of Amplifiers, Package.
No drop-in alternatives available for this product.
Request AlternativesAD704JR-16 Maximum Ratings & Electrical Characteristics
| Number of Amplifiers | 4 amplifiers |
| Amplifier Type | Low-power bipolar operational amplifier |
| Input Transistor Technology | Superbeta bipolar input transistors |
| Input Bias Current | Picoampere level at room temperature |
| Input Bias Current Temperature Change | Typically 5× at 125°C |
| Package | 16-SOIC |
| Mounting Type | Surface mount |
AD704JR-16 16-soic Pin Configuration Guide
Pin configuration for AD704JR-16 (16-soic package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.
No detailed pinout data available for AD704JR-16.
Refer to the datasheet for full pin configuration.
Typical Applications
AD704JR-16 is suitable for 6 applications: Precision Sensor Signal Conditioning, Current-to-Voltage Conversion, Bridge Sensor Front Ends, Low-Level Data Acquisition, Precision Filtering and Buffering, Battery-Powered Instrumentation.
Precision Sensor Signal Conditioning
The AD704JR-16 is suitable for conditioning high-impedance sensor outputs because its superbeta bipolar input stage provides picoampere-class input bias current at room temperature. Bias current flowing through a high source resistance can create an error voltage large enough to corrupt a low-level sensor signal; the AD704 reduces that contribution and typically changes bias current by only 5× at 125°C. Four amplifiers can condition several channels in one 16-SOIC package. Confirm the common-mode input range, offset, noise, and gain-bandwidth requirements against each sensor output before setting the operating gain.
Recommended
Current-to-Voltage Conversion
The AD704JR-16 fits transimpedance and current-to-voltage conversion stages in which the source may present substantial output impedance. Picoampere-level input bias current at room temperature limits the offset contribution introduced by the input leakage path, while the low temperature drift improves conversion accuracy across changing ambient conditions. The quad package allows one input stage, a reference buffer, an output filter, and a monitor channel to share a common 16-SOIC footprint. Validate bandwidth against the intended feedback resistance and capacitance, and use the manufacturer electrical tables to establish usable output swing.
Recommended
Bridge Sensor Front Ends
The AD704JR-16 can amplify differential outputs from resistive bridge sensors when low input leakage and temperature stability are important. A bridge presents a high source impedance, making picoampere-class input bias current valuable for preserving small differential signals. Its four channels can support excitation buffering, instrumentation amplification, filtering, or output buffering while reducing board area. The design must verify input common-mode limits against the bridge excitation voltage and confirm that offset drift, noise, and gain-bandwidth meet the required measurement resolution.
Recommended
Low-Level Data Acquisition
The AD704JR-16 is appropriate for low-level data-acquisition channels where leakage from the amplifier input can change the source voltage. Its low-power operation and integrated quad architecture help portable or distributed measurement systems manage both energy use and board area. Four channels can acquire thermocouple, capacitive, electrochemical, or other high-impedance sensor outputs, but each channel must be checked for common-mode range and output swing. Add input protection and filtering without introducing leakage that would cancel the benefit of the low-bias-current input stage.
Recommended
Precision Filtering and Buffering
The AD704JR-16 can implement active filters and unity-gain buffers around high-impedance sources when conventional CMOS inputs would load the signal excessively. Picoampere-class bias current at room temperature reduces current drawn from sensitive sources, and the lower temperature drift helps preserve signal integrity as ambient conditions change. The quad package makes it practical to combine two filter sections with two buffers on one board. Confirm gain-bandwidth product and slew rate at the selected closed-loop gain, and keep the output within the amplifier's specified swing range.
Recommended
Battery-Powered Instrumentation
The AD704JR-16 fits battery-powered instrumentation that must measure high-impedance sources without wasting energy on excessive input bias current. Its low-power bipolar design supports four precision channels in one package, allowing a compact instrument to replace separate amplifier packages. The AD704's picoampere-class room-temperature bias current is particularly useful for leakage-sensitive electrochemical, capacitive, or strain-gage systems. Confirm total supply current and the operating temperature grade for the target enclosure, and account for regulator efficiency when calculating battery life.
Recommended
Recommended Products Summary
Engineering reference data for AD704JR-16 — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product |
|---|---|
| Brand | Analog Devices |
| Package | 16-SOIC |
| Number of Amplifiers | 4 |
| Amplifier Architecture | Low-power bipolar |
| Input Transistor Type | Superbeta bipolar |
| Input Bias Current at Room Temperature | Picoampere class |
| Input Bias Current Change at 125°C | Typically 5× |
| Integrated Channel Count | 4 channels |
| Power Characterization | Low power |
| Primary Signal Path | Precision amplification and buffering |
Key Differentiators
- Picoampere-class input bias current with bipolar temperature behavior (vs AD704JRZ-16)
- Four precision amplifiers in one package (vs LM358N/NOPB)
- Superbeta bipolar input stage (vs LM324N/NOPB)
- Low-power precision architecture (vs LM2904M/NOPB)
Design Notes
Place the supply bypass capacitor at the package supply pins with the shortest possible trace, and provide a low-impedance ground return. Four amplifiers share the same package power connections, so adequate bypassing is especially important when several channels switch load simultaneously. Route high-impedance inputs away from switching nodes, inductors, and digital return currents; small parasitic leakage on these traces can negate the benefit of picoampere-class input bias current.
Treat the input and feedback network as a high-impedance analog section. Use short guarded traces, clean guard rings where appropriate, and sockets or board materials with controlled surface leakage. Before finalizing the gain, verify that the feedback resistor, source impedance, and parasitic capacitance produce acceptable noise gain and bandwidth. An apparently correct DC gain can become unstable or overly noisy at the maximum intended signal frequency.
Do not select the AD704JR-16 solely because a replacement is described as a quad amplifier. Confirm the 16-SOIC pinout, supply voltage, common-mode range, output swing, offset, noise, bandwidth, and temperature grade. The AD704JRZ-16 ordering variant shares the family name but can differ in grade or packaging interpretation. Review the complete ordering information before treating it as a production substitute.
Use the minimum supply voltage permitted for the required output range and confirm the total current drawn by all four channels. Lower supply voltage generally reduces dissipation, but the amplifier must still support the input common-mode and output swing. Check that the source can start into the selected load without violating current limits, and provide appropriate decoupling at the package pins.
Compliance Information
Compliance attributes are not stated on the AD704 product page excerpt and require confirmation from the current manufacturer product documentation or declaration.