Analog Devices

AD704JR-16 - Low-Power Quad Picoamp Op Amp | Analog Devices

N.º da peça: AD704JR-16 ✓ Ativo
Picoampere level at room temperature Id 16-SOIC Package
MOQ: 1 |

AD704JR-16 Visão geral

Analog Devices AD704JR-16 is a low-power, quad bipolar operational amplifier with picoampere-class input bias current in a 16-SOIC package. The device combines the low input bias current associated with BiFET amplifiers with bipolar input-transistor behavior and lower bias-current drift over temperature. Its four amplifiers support instrumentation, sensor-conditioning, and precision signal-processing systems that require multiple independently usable low-bias channels in one package.

An operational amplifier is a high-gain, differential-input analog amplifier used to amplify, buffer, filter, or compare small voltage signals. Within the semiconductor hierarchy, the AD704 belongs to the operational-amplifier and signal-conditioning IC category. Its superbeta bipolar input stage is designed for picoampere input bias current at room temperature while maintaining substantially better bias-current stability than conventional BiFET input stages as temperature rises.

The AD704 family provides four amplifiers in each package, a useful integration advantage for multi-channel sensor systems. According to Analog Devices, the input bias current typically increases by only 5× at 125°C, whereas a BiFET amplifier can exhibit substantially greater temperature-related change. The low power design also makes the AD704 suitable for portable instrumentation and precision measurement systems where amplifier bias current can create measurement errors or consume unnecessary energy.

Common uses include low-level sensor amplification, current-to-voltage conversion, bridge excitation, precision filtering, buffering, and signal conditioning. Its picoampere input bias current is especially useful with high-impedance sources because input leakage can shift the signal voltage and corrupt the measurement. Four amplifiers in one package can simplify multichannel designs while reducing board area compared with four separate single amplifier packages.

The main design consideration is the trade-off between very low input bias current and the noise, offset, bandwidth, and supply requirements of the bipolar amplifier architecture. The input common-mode range, output swing, and supply limits must be checked against the intended signal range. Decoupling capacitors should be placed close to the supply pins, and sensitive analog traces should be kept away from high-current switching paths to minimize coupled interference.

This product page combines the AD704 family characteristics, ordering information, sourcing guidance, and practical design considerations in one place. It also distinguishes the exact AD704JR-16 orderable device from related packaging and grade designations so engineers can confirm the correct part before beginning a PCB layout or production BOM.

Alternativas drop-in para AD704JR-16 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com AD704JR-16 (mesmo formato e footprint) — diferindo em Amplifier Type, Number of Amplifiers, Package.

Analog Devices
Amplifier Type: Quad precision operational amplifier
Number of Amplifiers: 4
Package: 16-lead SOIC
Comparar com AD704JR-16 →

Nenhuma alternativa drop-in disponível para este produto.

Solicitar alternativas

AD704JR-16 Classificações máximas e características elétricas

Number of Amplifiers 4 amplifiers
Amplifier Type Low-power bipolar operational amplifier
Input Transistor Technology Superbeta bipolar input transistors
Input Bias Current Picoampere level at room temperature
Input Bias Current Temperature Change Typically 5× at 125°C
Encapsulamento 16-SOIC
Tipo de montagem Surface mount

Guia de Configuração de Pinos do AD704JR-16 16-soic

Configuração de pinos para AD704JR-16 (pacote 16-soic). Este componente analógico possui pinos de entrada, saída e alimentação. Consulte o datasheet do fabricante para configurações de offset null, compensação e pino de enable. Ideal para circuitos de condicionamento de sinal e amplificadores.

Diagrama de pinagem do pacote 16-soic para AD704JR-16

Nenhum dado detalhado de pinagem disponível para AD704JR-16.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

AD704JR-16 é adequado para 6 aplicaçãos: Precision Sensor Signal Conditioning, Current-to-Voltage Conversion, Bridge Sensor Front Ends, Low-Level Data Acquisition, Precision Filtering and Buffering, Battery-Powered Instrumentation.

🧩

Precision Sensor Signal Conditioning

The AD704JR-16 is suitable for conditioning high-impedance sensor outputs because its superbeta bipolar input stage provides picoampere-class input bias current at room temperature. Bias current flowing through a high source resistance can create an error voltage large enough to corrupt a low-level sensor signal; the AD704 reduces that contribution and typically changes bias current by only 5× at 125°C. Four amplifiers can condition several channels in one 16-SOIC package. Confirm the common-mode input range, offset, noise, and gain-bandwidth requirements against each sensor output before setting the operating gain.

⚡

Current-to-Voltage Conversion

The AD704JR-16 fits transimpedance and current-to-voltage conversion stages in which the source may present substantial output impedance. Picoampere-level input bias current at room temperature limits the offset contribution introduced by the input leakage path, while the low temperature drift improves conversion accuracy across changing ambient conditions. The quad package allows one input stage, a reference buffer, an output filter, and a monitor channel to share a common 16-SOIC footprint. Validate bandwidth against the intended feedback resistance and capacitance, and use the manufacturer electrical tables to establish usable output swing.

🏭

Bridge Sensor Front Ends

The AD704JR-16 can amplify differential outputs from resistive bridge sensors when low input leakage and temperature stability are important. A bridge presents a high source impedance, making picoampere-class input bias current valuable for preserving small differential signals. Its four channels can support excitation buffering, instrumentation amplification, filtering, or output buffering while reducing board area. The design must verify input common-mode limits against the bridge excitation voltage and confirm that offset drift, noise, and gain-bandwidth meet the required measurement resolution.

📡

Low-Level Data Acquisition

The AD704JR-16 is appropriate for low-level data-acquisition channels where leakage from the amplifier input can change the source voltage. Its low-power operation and integrated quad architecture help portable or distributed measurement systems manage both energy use and board area. Four channels can acquire thermocouple, capacitive, electrochemical, or other high-impedance sensor outputs, but each channel must be checked for common-mode range and output swing. Add input protection and filtering without introducing leakage that would cancel the benefit of the low-bias-current input stage.

🔧

Precision Filtering and Buffering

The AD704JR-16 can implement active filters and unity-gain buffers around high-impedance sources when conventional CMOS inputs would load the signal excessively. Picoampere-class bias current at room temperature reduces current drawn from sensitive sources, and the lower temperature drift helps preserve signal integrity as ambient conditions change. The quad package makes it practical to combine two filter sections with two buffers on one board. Confirm gain-bandwidth product and slew rate at the selected closed-loop gain, and keep the output within the amplifier's specified swing range.

🔋

Battery-Powered Instrumentation

The AD704JR-16 fits battery-powered instrumentation that must measure high-impedance sources without wasting energy on excessive input bias current. Its low-power bipolar design supports four precision channels in one package, allowing a compact instrument to replace separate amplifier packages. The AD704's picoampere-class room-temperature bias current is particularly useful for leakage-sensitive electrochemical, capacitive, or strain-gage systems. Confirm total supply current and the operating temperature grade for the target enclosure, and account for regulator efficiency when calculating battery life.

What is the AD704JR-16?
The AD704JR-16 is a low-power, quad bipolar operational amplifier from Analog Devices with picoampere-class input bias current in a 16-SOIC package. According to the Analog Devices AD704 product page, it uses superbeta bipolar input transistors to obtain low input bias current while avoiding the relatively high bias-current drift associated with BiFET input stages. Four amplifiers are integrated in one package for multichannel precision signal-conditioning applications.
How many amplifiers are in the AD704JR-16?
The AD704JR-16 contains four operational amplifiers. The Analog Devices AD704 product page identifies the device as a quad, low-power bipolar op amp, allowing four signal channels to be implemented in one 16-SOIC package. This integration can reduce PCB area and simplify common supply bypassing when a system requires several low-bias amplification or buffering functions. Each amplifier remains independently usable within the package's specified operating limits.
What is the input bias current of the AD704JR-16?
The AD704JR-16 achieves picoampere-class input bias current at room temperature. Analog Devices states that the superbeta bipolar input stage produces picoampere input bias-current levels similar to FET-input amplifiers at room temperature. This low leakage is valuable when the AD704 is connected to high-impedance sensors because input bias current can otherwise create an error voltage across the source impedance.
How does AD704 input bias-current drift compare with BiFET amplifiers?
The AD704's input bias current typically increases by only 5× at 125°C, while a BiFET amplifier can exhibit substantially greater temperature-dependent change. Analog Devices highlights this reduced drift as the principal distinction between the AD704's superbeta bipolar input stage and conventional BiFET inputs. The behavior is especially relevant to precision measurements spanning a wide ambient-temperature range.
Where can I download the AD704JR-16 datasheet PDF?
The official AD704 datasheet and product information are available through the Analog Devices AD704 product page at https://www.analog.com/en/products/ad704.html. Use the manufacturer's pin-description table, electrical-characteristics table, and package drawings when assigning PCB tracks. The AD704 family page is the appropriate document source for confirming supply limits, offset, bandwidth, noise, common-mode range, and ordering-code details.
Where can I find the AD704JR-16 pinout?
The AD704JR-16 pin assignments are shown in the AD704 manufacturer's datasheet, which is linked from the official Analog Devices product page. Use that pin-description table for the 16-SOIC footprint and verify the exposed connections and supply pins before laying out the board. The 16-SOIC package outline can be represented with the standard soic-16 package drawing on this page.
Is the AD704JR-16 suitable for high-impedance sensor measurement?
The AD704JR-16 is well suited to high-impedance sensor measurement because its input bias current reaches picoampere levels at room temperature. Bias current multiplied by source impedance produces input-referred error voltage, so low leakage helps preserve small sensor signals. The design must also satisfy the amplifier's input common-mode range, offset, noise, and bandwidth requirements for the selected gain.
What applications are best for the AD704JR-16?
The AD704JR-16 fits precision current-to-voltage conversion, bridge-sensor conditioning, low-level signal buffering, and multichannel instrumentation. Its four amplifiers provide useful integration when several channels require low input leakage, while low power supports portable measurement systems. The operating range and noise performance must match the signal bandwidth and precision required by the end application.
What is the best drop-in replacement for the AD704JR-16?
A suitable drop-in replacement must use the same 16-SOIC footprint, preserve the four-amplifier pin arrangement, and meet the input-bias-current, offset, bandwidth, noise, supply, and common-mode requirements. No technically qualified drop-in substitute is established on the AD704 cross-reference page, so do not substitute a part solely because it is also a quad amplifier. Review the manufacturer's electrical tables and validate any proposed replacement in the target circuit.
Can an AD704JRZ-16 replace the AD704JR-16?
The AD704JRZ-16 is an Analog Devices 16-SOIC quad-amplifier ordering variant, but it is not automatically a functional drop-in substitute for the AD704JR-16. The suffix can encode different grade, temperature, or packaging information, and those distinctions may affect production qualification. Confirm the complete ordering code and every electrical limit in the AD704 datasheet before approving the substitution.
What can replace the AD704JR-16?
The AD704JR-16 can only be replaced safely by a quad amplifier with the same 16-SOIC pin arrangement and equivalent electrical characteristics. Important checks include picoampere-class input bias current, bias-current drift, input offset, noise, gain-bandwidth product, slew rate, supply range, common-mode range, and output swing. The available AD704 cross-reference results do not identify a confirmed replacement, so any candidate requires datasheet review and circuit validation.
AD704JR-16 vs AD704JRZ-16 — which is better?
The AD704JR-16 and AD704JRZ-16 are closely related Analog Devices orderable variants, so the correct choice depends on the grade and packaging requirements represented by their complete ordering codes. Both are listed as quad amplifiers in 16-SOIC packages. Compare the exact temperature rating, reel or tube format, and orderable-part documentation before selecting between them; do not infer interchangeability from the shared AD704 family name alone.
When should I choose the AD704JR-16 over a conventional precision op amp?
Choose the AD704JR-16 when very low input bias current and low temperature-related drift are more important than the operating characteristics of a conventional precision amplifier. Its picoampere-class room-temperature bias current reduces errors with high source impedances, while the 5× typical increase at 125°C supports stable behavior over temperature. For lower-impedance or higher-bandwidth systems, compare offset, noise, speed, and supply requirements before choosing.
Where can I buy the AD704JR-16 online?
Use the Request a Quote form on this page to request the AD704JR-16, current availability, and order quantities. The form allows an engineer to specify the required quantity and package format without relying on a static price that may change. Confirm the returned line item against the exact AD704JR-16 ordering code and the 16-SOIC package before authorizing shipment.
What is the price and lead time for the AD704JR-16?
Current AD704JR-16 pricing, stock status, and lead time should be requested through the Request a Quote form on this page. Quote responses should identify the exact AD704JR-16 orderable code, package format, quantity, and expected delivery terms. This approach provides transaction-specific information while avoiding a static unit price that can become stale as inventory and market conditions change.
Is the AD704JR-16 in stock?
The current AD704JR-16 stock position should be confirmed with the Request a Quote form on this page. Provide the required quantity, production schedule, and acceptable packaging format so the supplier can respond with an accurate allocation and lead time. Treat any stale catalog indication as provisional until the exact orderable part and commercial terms are confirmed.
What are the key specifications of the AD704JR-16 that engineers should know?
The essential AD704JR-16 characteristics are four amplifiers per 16-SOIC package, picoampere-class room-temperature input bias current, superbeta bipolar input transistors, and a typical 5× bias-current increase at 125°C. It is intended for low-power precision signal conditioning. Supply range, offset, noise, bandwidth, slew rate, common-mode range, and output swing must be taken from the manufacturer's AD704 datasheet for design sign-off.

Dados de referência de engenharia para AD704JR-16 — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the AD704JR-16 when the signal source has high impedance, input leakage would materially affect accuracy, and four low-bias channels are needed in a 16-SOIC footprint. Its picoampere-class room-temperature bias current and typical 5× increase at 125°C are particularly useful in precision bridge, electrochemical, capacitive, and strain-gage measurement systems. The AD704JRZ-16 may be relevant when a related AD704 ordering code is required, but its grade and packaging interpretation must be checked before substitution. Consider LM2904-family devices when a broader precision-amplifier portfolio is more important than the AD704's superbeta input characteristics. LM358-family devices can serve lower-cost or lower-sensitivity channels, but their dual configuration requires more packages for a four-channel design. In every case, verify supply range, common-mode input range, output swing, offset, noise, bandwidth, and temperature requirements in the manufacturer datasheet.

Comparação com alternativas

Parâmetro Este produto
Brand Analog Devices
Package 16-SOIC
Number of Amplifiers 4
Amplifier Architecture Low-power bipolar
Input Transistor Type Superbeta bipolar
Input Bias Current at Room Temperature Picoampere class
Input Bias Current Change at 125°C Typically 5×
Integrated Channel Count 4 channels
Power Characterization Low power
Primary Signal Path Precision amplification and buffering

Principais diferenciais

  • Picoampere-class input bias current with bipolar temperature behavior (vs AD704JRZ-16)
  • Four precision amplifiers in one package (vs LM358N/NOPB)
  • Superbeta bipolar input stage (vs LM324N/NOPB)
  • Low-power precision architecture (vs LM2904M/NOPB)

Notas de projeto

Place the supply bypass capacitor at the package supply pins with the shortest possible trace, and provide a low-impedance ground return. Four amplifiers share the same package power connections, so adequate bypassing is especially important when several channels switch load simultaneously. Route high-impedance inputs away from switching nodes, inductors, and digital return currents; small parasitic leakage on these traces can negate the benefit of picoampere-class input bias current.

Treat the input and feedback network as a high-impedance analog section. Use short guarded traces, clean guard rings where appropriate, and sockets or board materials with controlled surface leakage. Before finalizing the gain, verify that the feedback resistor, source impedance, and parasitic capacitance produce acceptable noise gain and bandwidth. An apparently correct DC gain can become unstable or overly noisy at the maximum intended signal frequency.

Do not select the AD704JR-16 solely because a replacement is described as a quad amplifier. Confirm the 16-SOIC pinout, supply voltage, common-mode range, output swing, offset, noise, bandwidth, and temperature grade. The AD704JRZ-16 ordering variant shares the family name but can differ in grade or packaging interpretation. Review the complete ordering information before treating it as a production substitute.

Use the minimum supply voltage permitted for the required output range and confirm the total current drawn by all four channels. Lower supply voltage generally reduces dissipation, but the amplifier must still support the input common-mode and output swing. Check that the source can start into the selected load without violating current limits, and provide appropriate decoupling at the package pins.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

Compliance attributes are not stated on the AD704 product page excerpt and require confirmation from the current manufacturer product documentation or declaration.

Dados verificados em: 2026-11-18 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

AD704JR-16 datasheet AD704JR-16 datasheet pdf AD704JR-16 pinout Analog Devices AD704JR-16 AD704JR-16 equivalent AD704JR-16 replacement AD704JR-16 cross reference AD704JR-16 16-SOIC AD704JR-16 picoampere op amp AD704JR-16 price AD704JR-16 stock AD704JR-16 sensor amplifier

Componentes & termos relacionados

Analog Devices AD704 AD704JR-16 AD704JRZ-16 quad operational amplifier low-power bipolar op amp precision op amp signal-conditioning IC semiconductor superbeta bipolar input transistor BiFET input transistor input bias current bias-current drift high-impedance sensor current-to-voltage conversion bridge sensor precision instrumentation active filter 16-SOIC SOIC family surface mount SMD package picoampere common-mode input range
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ