AD7266BCP - Dual 12-Bit 2 MSPS ADC | Analog Devices
MPN: AD7266BCP ✓ ActiveAD7266BCP Overview
A successive-approximation ADC is a data-converter type that samples an analog input and progressively resolves it into a digital code. A SAR ADC belongs to the broader ADC family within data-converter and mixed-signal semiconductors. The AD7266 combines that architecture with dual-channel conversion and multiplexing, making it useful when several analog signals must be digitized rapidly while preserving sampled signal fidelity.
The dual-converter architecture supports concurrent acquisition when both ADC sections are used, while each three-channel multiplexer provides six analog inputs. Resolution is 12 bits, producing 4096 quantization levels per conversion. The 2 MSPS throughput rate is suitable for industrial control, data acquisition, communications, instrumentation, and other embedded signal-processing systems requiring more speed than a general-purpose slow ADC.
The AD7266 accepts a single supply from 2.7 V to 5.25 V, allowing operation in 3.3 V and 5 V systems. Its serial interface is compatible with SPI, Microwire, and QSPI-oriented data-transfer methods. Each conversion path uses a low-noise, wide-bandwidth track-and-hold front end, an architecture intended to support input signals extending beyond 30 MHz and to reduce acquisition-time constraints in higher-bandwidth systems.
Typical uses include multichannel process control, motor and power-system monitoring, vibration and condition monitoring, communications receivers, and factory automation. The 32-lead LFCSP package supports compact, high-density designs, but its exposed thermal pad requires careful PCB layout and adequate copper for heat spreading. Input filtering, reference stability, source impedance, digital-interface timing, and power-supply decoupling remain central to obtaining repeatable conversion results.
For an existing 5 V or 3.3 V design, confirm the selected supply voltage, analog input range, differential or single-ended input configuration, interface mode, clock source, and acquisition timing in the manufacturer datasheet before finalizing the PCB. Place the exposed-pad thermal land correctly, connect the analog and digital returns thoughtfully, and keep high-speed input traces short. The AD7266 datasheet remains the controlling reference for pin assignments, timing, and recommended application circuits.
This product record combines the manufacturer specifications with package, sourcing, replacement, and design guidance. It also distinguishes true drop-in compatibility from merely similar ADC functions, helping engineers evaluate PCB reuse, interface behavior, conversion performance, and thermal constraints before committing to a design change.
Drop-in alternatives for AD7266BCP — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with AD7266BCP (same form factor and footprint) — differing in Package, Resolution.
AD7266BCPZ-REEL
✅ Drop-InContact for price
View Datasheet →AD7266BCP Maximum Ratings & Electrical Characteristics
| ADC Architecture | Successive approximation (SAR) |
| Number of ADCs | 2 |
| Resolution | 12 bits |
| Total Analog Inputs | 6 channels |
| Channels per ADC | 3 channels |
| Maximum Throughput Rate | 2 MSPS |
| Supply Voltage Range | 2.7 V to 5.25 V |
| Input Configuration | Differential input |
| Track-and-Hold Input Frequency | In excess of 30 MHz |
| Digital Interface | Serial SPI, Microwire, and QSPI |
| Package | 32-lead LFCSP with exposed pad, 5 mm x 5 mm |
| Mounting Type | Surface mount |
AD7266BCP 32-lead lfcsp with exposed pad, 5 mm x 5 mm Pin Configuration Guide
Pin configuration for AD7266BCP (32-lead lfcsp with exposed pad, 5 mm x 5 mm package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.
No detailed pinout data available for AD7266BCP.
Refer to the datasheet for full pin configuration.
Typical Applications
AD7266BCP is suitable for 6 applications: Industrial Process Control, Motor and Power-System Monitoring, Communications Signal Acquisition, Condition and Vibration Monitoring, Data-Acquisition Instruments, Embedded Measurement Systems.
Industrial Process Control
The AD7266BCP suits multichannel process-control boards that must acquire voltage or sensor signals while executing control calculations. Its two 12-bit SAR converters and six multiplexed inputs reduce the number of separate converter packages, while throughput up to 2 MSPS supports fast feedback loops. Each ADC section includes a wide-bandwidth track-and-hold front end capable of handling input frequencies above 30 MHz. Place the device near the analog inputs, keep traces short, provide stable reference and supply decoupling, and use the exposed-pad land for heat spreading. The 2.7 V to 5.25 V operating range also allows the converter to share a 3.3 V or 5 V industrial control rail.
Recommended
Motor and Power-System Monitoring
The AD7266BCP is appropriate for monitoring current, voltage, and position-related signals in industrial motor-drive or power-system control equipment. Two independent 12-bit conversion sections can sample two related analog quantities, and the two three-channel multiplexers expand each section to three selectable inputs. At rates up to 2 MSPS, the converter can capture transient information more rapidly than many general-purpose instrumentation ADCs. The wide-bandwidth track-and-hold amplifiers support input frequencies exceeding 30 MHz, but application filtering and careful grounding remain necessary to prevent high-energy switching nodes from corrupting measurements. Use a regulated reference, separate sensitive analog routing from power-stage switching, and verify the selected input configuration in the manufacturer datasheet.
Recommended
Communications Signal Acquisition
The AD7266BCP can form the acquisition stage of communications equipment requiring compact, multichannel, moderate-resolution digitization. Its serial SPI, Microwire, and QSPI-compatible interface supports integration with embedded processors and digital signal processors, while the 2 MSPS maximum throughput provides sufficient speed for many intermediate-frequency or baseband measurement paths. The wide-bandwidth track-and-hold front end is useful when the analog signal frequency exceeds the capability of slower general-purpose converters. Designers should still control clock jitter, termination, return paths, and analog noise because interface compatibility alone does not guarantee accurate RF or communications measurements. Keep the digital clock and data routing separated from high-level input nodes, and follow the reference circuitry and layout sequence in the AD7266 datasheet.
Recommended
Condition and Vibration Monitoring
The AD7266BCP is suitable for condition-monitoring systems that sample several sensor outputs for spectral analysis or fault detection. Six multiplexed analog inputs organized across two 12-bit ADCs provide flexible channel density, and throughput up to 2 MSPS supports sampling of vibration, position, and acceleration signals. The dual-channel architecture can support paired measurements that improve comparison of reference and sensor channels. Input conditioning remains a central design task: protect the ADC from out-of-range transients, apply anti-alias filtering, and maintain low source impedance at the multiplexer inputs. The 5 mm by 5 mm LFCSP package saves board area, although its exposed pad requires a carefully stitched ground and thermal layout. Validate channel timing and acquisition sequencing against the chosen operating mode.
Recommended
Data-Acquisition Instruments
The AD7266BCP can serve as the central converter in compact laboratory or field data-acquisition equipment requiring several analog inputs, serial digital connectivity, and low external component count. Its two 12-bit SAR converters, each behind a three-channel multiplexer, provide six selectable channels, and the 2 MSPS throughput allows rapid sequential sampling. The single 2.7 V to 5.25 V supply simplifies power planning in portable and benchtop systems. For instrumentation-grade results, use a stable reference, account for source settling time after multiplexing, and apply suitable input protection and filtering. The exposed-pad construction makes uninterrupted thermal copper important, particularly in compact enclosures. Review the manufacturer’s recommended application circuit and acquisition timing diagram before fixing the analog front end.
Recommended
Embedded Measurement Systems
The AD7266BCP is appropriate for embedded measurement systems that need deterministic conversion performance in a compact mixed-signal design. The SAR architecture provides straightforward digital timing, and the serial interface allows the converter to operate alongside a microcontroller, DSP, or programmable logic without a parallel data bus. Two conversion channels and six multiplexed inputs are useful for tracking analog state variables, while the single 2.7 V to 5.25 V supply can simplify integration into 3.3 V systems. Firmware must observe acquisition, conversion, and data-ready timing from the manufacturer datasheet. PCB designers should place input, reference, and decoupling networks close to the package, preserve a continuous return path beneath the digital interface, and use the exposed pad as both a thermal and low-impedance ground feature when the reference design specifies that arrangement.
Recommended
Recommended Products Summary
Engineering reference data for AD7266BCP — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | AD7266BCPZ |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Package | 32-lead LFCSP with exposed pad, 5 mm x 5 mm | 32-lead LFCSP with exposed pad, 5 mm x 5 mm |
| ADC Architecture | Successive approximation (SAR) | Successive approximation (SAR) |
| Resolution | 12 bits | 12 bits |
| Number of ADCs | 2 | 2 |
| Total Analog Inputs | 6 channels | 6 channels |
| Maximum Throughput Rate | 2 MSPS | 2 MSPS |
| Supply Voltage Range | 2.7 V to 5.25 V | 2.7 V to 5.25 V |
| Digital Interface | Serial SPI, Microwire, and QSPI | Serial SPI, Microwire, and QSPI |
| Input Signal Type | Differential input | Differential input |
| Track-and-Hold Input Frequency | In excess of 30 MHz | In excess of 30 MHz |
| Ordering-Code Difference | AD7266BCP | AD7266BCPZ |
Key Differentiators
- Dual ADC channels with six multiplexed inputs (vs AD7266BCPZ)
- High-speed track-and-hold input capability (vs AD7266BCPZ)
- Single-supply operation in common embedded rails (vs AD7266BCPZ)
Design Notes
Treat the exposed pad as a mandatory PCB feature rather than an optional thermal area. Follow the Analog Devices datasheet land pattern for the 32-lead LFCSP, place the analog and digital supply capacitors close to their designated pins, and provide via stitching beneath or adjacent to the exposed pad. Keep high-speed input and clock routes away from digital outputs and switching-node connections. The wide-bandwidth track-and-hold front end can amplify routing problems, so short return paths and a continuous ground reference are particularly important.
Design the analog input path around source impedance, multiplexer settling time, and acquisition timing. Place anti-alias and protection components close to the ADC inputs, and verify that the external drive network allows the selected channel to settle within the acquisition interval specified by the manufacturer. Because the track-and-hold amplifiers support frequencies above 30 MHz, small parasitic differences between channels can become significant. Use symmetrical routing where channel comparison or phase relationships matter, and keep the serial clock away from sensitive input nodes.
Decouple the single 2.7 V to 5.25 V supply locally at the device and maintain a low-impedance return for both analog and digital sections. Use the supply and reference arrangements shown in the AD7266 datasheet, including the appropriate capacitor types and placement. Separate noisy digital return currents from sensitive analog input paths, and avoid routing supply current through the analog signal traces. The 5 mm by 5 mm package reduces board area, but adequate copper and thermal vias are still necessary to prevent localized heating near the exposed pad.
Do not assume that identical 12-bit resolution guarantees interchangeable timing or signal-chain behavior. Confirm the differential-input configuration, allowable common-mode range, reference voltage, clock polarity, conversion latency, and data-valid interpretation in the AD7266 datasheet. When multiplexing among six inputs, allow each channel to settle before conversion. Also verify that any selected alternative ordering code retains the same exposed-pad geometry and terminal assignments before reusing an existing board layout.
Compliance Information
The manufacturer product information and datasheet excerpts confirm the AD7266 family specifications but do not provide explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements for this ordering code. The AD7266BCPZ designation includes a Z suffix, but the Z suffix alone is not used as proof of a specific compliance status.