AD8007ARZ - 650MHz Current Feedback Amplifier | Analog Devices
MPN: AD8007ARZ ✓ ActiveAD8007ARZ Overview
A current-feedback amplifier is a voltage-feedback amplifier variation that uses error-current feedback to establish gain. This architecture can provide wide bandwidth and fast slew performance without the gain-bandwidth relationship characteristic of many conventional voltage-feedback amplifiers. Within the amplifier-IC hierarchy, the AD8007ARZ belongs to the high-speed, low-noise analog signal-conditioning family.
The AD8007 uses Analog Devices' second-generation eXtra-Fast Complementary Bipolar, or XFCB, process. According to the manufacturer product page, this process supports its combination of high speed, ultralow distortion, low noise, and low quiescent current. The verified specifications identify the device as a one-amplifier current-feedback solution in an 8-pin SOIC package.
With a listed bandwidth of 650 MHz and slew rate of 1000 V/µs, the amplifier is suited to waveform generation, video and test-signal paths, active filtering, and high-speed instrumentation. Because a current-feedback amplifier's bandwidth depends on closed-loop gain, engineers should use the manufacturer gain-versus-bandwidth and stability information when setting a gain and adding compensation.
Typical uses include high-speed buffers, low-distortion signal conditioners, ADC or DAC interface paths, communications equipment, and laboratory test systems. Its 5 V to 12 V operating range also makes it suitable for conventional analog equipment built around positive 5 V or 12 V rails.
When laying out an AD8007ARZ circuit, use the manufacturer's recommended resistor values and place feedback and decoupling components close to the device. High-speed current-feedback amplifiers require short feedback paths and careful grounding because excessive parasitic capacitance can reduce stability or increase distortion.
This page combines the manufacturer's device information with a practical comparison of same-footprint options, pin-assignment guidance, sourcing questions, and design notes for engineers evaluating the AD8007ARZ in high-speed analog signal chains.
Drop-in alternatives for AD8007ARZ — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
AD8007AR
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
AD8007ARZ-RL
✅ Drop-In📋 Reference alternative (not in catalog)
AD8007ARZ-R7
✅ Drop-In📋 Reference alternative (not in catalog)
AD8007ARZ1
✅ Drop-In📋 Reference alternative (not in catalog)
AD8007
✅ Drop-In📋 Reference alternative (not in catalog)
AD8007ARZ Maximum Ratings & Electrical Characteristics
| Amplifier Type | Current Feedback Amplifier |
| Number of Channels | 1 channel |
| Gain-Bandwidth Product | 650 MHz |
| Slew Rate | 1000 V/µs |
| Supply Voltage Range | 5 V to 12 V |
| Package | 8-pin SOIC |
| Process Technology | Second-generation XFCB complementary bipolar process |
| Distortion | Ultralow distortion |
| Noise | Low noise |
| Quiescent Current | Low quiescent current |
AD8007ARZ Pin Configuration
| Pin 1 | NC — Not connected |
| Pin 2 | -IN — Inverting input |
| Pin 3 | +IN — Non-inverting input |
| Pin 4 | V- — Negative supply voltage |
| Pin 5 | NC — Not connected |
| Pin 6 | OUT — Amplifier output |
| Pin 7 | V+ — Positive supply voltage |
| Pin 8 | NC — Not connected |
Typical Applications
AD8007ARZ is suitable for 6 applications: High-Speed Video Signal Conditioning, Active Filtering and Frequency Response, Test and Measurement Instrumentation, Communications Front-End Signal Paths, High-Speed ADC and DAC Interface, Precision Waveform Generation.
High-Speed Video Signal Conditioning
The AD8007ARZ fits wideband video conditioning because its listed 650 MHz bandwidth and 1000 V/µs slew rate support large-amplitude signals at high frequencies. It can serve as a low-distortion buffer or gain stage between a source and a higher-impedance video load. Analog Devices describes the AD8007 family as having ultralow distortion and low noise, which helps preserve signal integrity in demanding video paths. The circuit should use the manufacturer's current-feedback resistor values and short feedback traces, because source impedance and parasitic capacitance can alter both bandwidth and stability.
Recommended
Active Filtering and Frequency Response
The AD8007ARZ is appropriate for active filters that require operating bandwidth beyond ordinary general-purpose amplifiers. Its 650 MHz listed bandwidth provides ample frequency range for wideband filter sections, while the 1000 V/µs slew rate helps preserve large-signal behavior. Current-feedback topology and the selected closed-loop gain determine the actual response, so component tolerances, source impedance, and parasitic capacitance must be included in the filter design. Use the manufacturer gain and stability curves when setting resistor values and checking ringing.
Recommended
Test and Measurement Instrumentation
The AD8007ARZ can serve as a high-speed buffer in test and measurement equipment where the source must drive downstream circuitry without substantial bandwidth loss. Its 650 MHz bandwidth and 1000 V/µs slew rate make it useful for amplifying or isolating pulsed, sinusoidal, and edge-rich signals. The low quiescent current also supports compact multi-channel systems, although total channel power and thermal behavior should be checked as channel count increases. Keep the feedback path short and use a clean return connection to minimize measurement error.
Recommended
Communications Front-End Signal Paths
The AD8007ARZ can be used in communications-related signal-conditioning stages where wide bandwidth and low distortion are more important than micropower operation. Its listed 650 MHz bandwidth, 1000 V/µs slew rate, and single-amplifier 8-pin SOIC package support compact high-speed analog channels. Analog Devices specifically describes the AD8007 as usable across a wide range of applications because of its performance and low quiescent current. Designers should still evaluate channel gain, source impedance, permissible output swing, and stability at the operating frequency.
Recommended
High-Speed ADC and DAC Interface
The AD8007ARZ is suitable for buffering high-speed ADC or DAC outputs when the interface requires low distortion and rapid slew performance. The amplifier's 650 MHz bandwidth and 1000 V/µs slew rate can reduce the loading presented to the converter when used with suitable source and termination networks. Actual interface suitability depends on converter edge rates, output impedance, sampling rate, and required settling time, none of which are established by the available device listing. Confirm the complete converter timing specification and use short PCB routing for the high-speed path.
Recommended
Precision Waveform Generation
The AD8007ARZ can amplify and buffer generated waveforms when fast edges and low distortion are important. A 1000 V/µs slew rate allows the output to follow rapidly changing signals, while the 650 MHz listed bandwidth supports high-frequency operating conditions. Low noise and low quiescent current are useful in laboratory or compact embedded systems where signal integrity and channel density both matter. Select the closed-loop gain carefully, observe the manufacturer's stability requirements, and ensure the connected load remains within the amplifier's operating limits.
Recommended
Recommended Products Summary
Engineering reference data for AD8007ARZ — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | AD8007AR | AD8007ARZ-RL | AD8007ARZ-R7 | AD8007ARZ1 | AD8007 |
|---|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC |
Key Differentiators
- Combines very high bandwidth with fast slew performance (vs AD8007AR)
- Single-amplifier configuration reduces board space in multi-channel designs (vs AD8008)
- Low-noise, low-distortion performance suited to precision high-speed paths (vs AD8007ARZ-RL)
- Wide operating supply range for conventional positive analog rails (vs AD8007ARZ-R7)
Design Notes
Keep the current-feedback loop physically short by placing the feedback resistor close to the inverting input and output pins. High-speed parasitic inductance and capacitance inside the feedback loop can create ringing or unstable frequency response. Route the non-inverting input and feedback return as short as practical, and follow the manufacturer's recommended gain resistor values because arbitrary resistor substitutions can materially change bandwidth and stability.
Use the manufacturer's recommended supply bypassing arrangement and place each decoupling capacitor directly across the corresponding supply and ground pins. The AD8007ARZ operates from 5 V to 12 V, but adequate local bypass energy is still required to preserve low-distortion operation during fast output transitions. Keep the supply return path short and connect it to a quiet analog ground plane without sharing long current paths with switching circuitry.
Do not treat the listed 650 MHz bandwidth as a closed-loop bandwidth specification at every gain. Current-feedback amplifiers have gain-dependent bandwidth, and their stability also depends on the feedback resistor, source impedance, and load. Before releasing a layout, evaluate the intended gain and source resistance using the manufacturer gain-bandwidth and stability information, then check the assembled circuit for peaking, overshoot, and unintended oscillation.
For high-speed signal routing, minimize connector and test-point discontinuities, use a controlled-impedance path when the board stackup permits, and keep sensitive input nodes away from clock and switching nodes. A short ground reference adjacent to the amplifier is more effective than a long connection to a distant ground point. If the source has nonzero output capacitance, include that capacitance in stability and settling calculations before assigning the final resistor values.
Compliance Information
No specific environmental or automotive compliance declaration was identified for the exact AD8007ARZ ordering code.