Analog Devices

AD8007ARZ - 650MHz Current Feedback Amplifier | Analog Devices

MPN: AD8007ARZ ✓ Aktif
5 V to 12 V Vdss Low quiescent current Id 8-pin SOIC Package
MOQ: 1 |

AD8007ARZ Ringkasan

The Analog Devices AD8007ARZ is a single, high-speed current-feedback amplifier with a 650 MHz bandwidth, 1000 V/µs slew rate, and operation from 5 V to 12 V in an 8-pin SOIC package. It is designed for applications requiring high bandwidth, low distortion, low noise, and low quiescent current.

A current-feedback amplifier is a voltage-feedback amplifier variation that uses error-current feedback to establish gain. This architecture can provide wide bandwidth and fast slew performance without the gain-bandwidth relationship characteristic of many conventional voltage-feedback amplifiers. Within the amplifier-IC hierarchy, the AD8007ARZ belongs to the high-speed, low-noise analog signal-conditioning family.

The AD8007 uses Analog Devices' second-generation eXtra-Fast Complementary Bipolar, or XFCB, process. According to the manufacturer product page, this process supports its combination of high speed, ultralow distortion, low noise, and low quiescent current. The verified specifications identify the device as a one-amplifier current-feedback solution in an 8-pin SOIC package.

With a listed bandwidth of 650 MHz and slew rate of 1000 V/µs, the amplifier is suited to waveform generation, video and test-signal paths, active filtering, and high-speed instrumentation. Because a current-feedback amplifier's bandwidth depends on closed-loop gain, engineers should use the manufacturer gain-versus-bandwidth and stability information when setting a gain and adding compensation.

Typical uses include high-speed buffers, low-distortion signal conditioners, ADC or DAC interface paths, communications equipment, and laboratory test systems. Its 5 V to 12 V operating range also makes it suitable for conventional analog equipment built around positive 5 V or 12 V rails.

When laying out an AD8007ARZ circuit, use the manufacturer's recommended resistor values and place feedback and decoupling components close to the device. High-speed current-feedback amplifiers require short feedback paths and careful grounding because excessive parasitic capacitance can reduce stability or increase distortion.

This page combines the manufacturer's device information with a practical comparison of same-footprint options, pin-assignment guidance, sourcing questions, and design notes for engineers evaluating the AD8007ARZ in high-speed analog signal chains.

Pilihan pengganti yang segera untuk AD8007ARZ — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

AD8007AR

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 8-pin SOIC
Same AD8007 current-feedback core and 8-pin SOIC format; ordering suffix differs by 0% in listed 650 MHz bandwidth, 1000 V/µs slew rate, and 5 V to 12 V supply range

📋 Alternatif rujukan (tidak dalam katalog)

AD8007ARZ-RL

✅ Masuk Drop-In
📦 8-pin SOIC
Same AD8007 family and listed 650 MHz bandwidth, 1000 V/µs slew rate, and 5 V to 12 V supply range; reel-ordering suffix differs

📋 Alternatif rujukan (tidak dalam katalog)

AD8007ARZ-R7

✅ Masuk Drop-In
📦 8-pin SOIC
Same AD8007 family and listed 650 MHz bandwidth, 1000 V/µs slew rate, and 5 V to 12 V supply range; tape-and-reel ordering suffix differs

📋 Alternatif rujukan (tidak dalam katalog)

AD8007ARZ1

✅ Masuk Drop-In
📦 8-pin SOIC
Same AD8007 family and core electrical ratings; ordering suffix differs by 0% in listed 650 MHz bandwidth and 1000 V/µs slew rate

📋 Alternatif rujukan (tidak dalam katalog)

AD8007

✅ Masuk Drop-In
📦 8-pin SOIC
Same AD8007 single current-feedback amplifier core with identical listed 650 MHz bandwidth, 1000 V/µs slew rate, and 5 V to 12 V supply range; suffix-specific grade or packing must be confirmed

📋 Alternatif rujukan (tidak dalam katalog)

AD8007ARZ Penilaian maksimum & Ciri-ciri Elektrik

Amplifier Type Current Feedback Amplifier
Number of Channels 1 channel
Gain-Bandwidth Product 650 MHz
Slew Rate 1000 V/µs
Supply Voltage Range 5 V to 12 V
Kemasan 8-pin SOIC
Process Technology Second-generation XFCB complementary bipolar process
Distortion Ultralow distortion
Noise Low noise
Arus Dalam Tentera Low quiescent current

Konfigurasi Pin AD8007ARZ

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
Pin 1 NC — Not connected
Pin 2 -IN — Inverting input
Pin 3 +IN — Non-inverting input
Pin 4 V- — Negative supply voltage
Pin 5 NC — Not connected
Pin 6 OUT — Amplifier output
Pin 7 V+ — Positive supply voltage
Pin 8 NC — Not connected

Aplikasi Biasa

AD8007ARZ patut untuk 6 aplikasis: High-Speed Video Signal Conditioning, Active Filtering and Frequency Response, Test and Measurement Instrumentation, Communications Front-End Signal Paths, High-Speed ADC and DAC Interface, Precision Waveform Generation.

📺

High-Speed Video Signal Conditioning

The AD8007ARZ fits wideband video conditioning because its listed 650 MHz bandwidth and 1000 V/µs slew rate support large-amplitude signals at high frequencies. It can serve as a low-distortion buffer or gain stage between a source and a higher-impedance video load. Analog Devices describes the AD8007 family as having ultralow distortion and low noise, which helps preserve signal integrity in demanding video paths. The circuit should use the manufacturer's current-feedback resistor values and short feedback traces, because source impedance and parasitic capacitance can alter both bandwidth and stability.

🔧

Active Filtering and Frequency Response

The AD8007ARZ is appropriate for active filters that require operating bandwidth beyond ordinary general-purpose amplifiers. Its 650 MHz listed bandwidth provides ample frequency range for wideband filter sections, while the 1000 V/µs slew rate helps preserve large-signal behavior. Current-feedback topology and the selected closed-loop gain determine the actual response, so component tolerances, source impedance, and parasitic capacitance must be included in the filter design. Use the manufacturer gain and stability curves when setting resistor values and checking ringing.

⚡

Test and Measurement Instrumentation

The AD8007ARZ can serve as a high-speed buffer in test and measurement equipment where the source must drive downstream circuitry without substantial bandwidth loss. Its 650 MHz bandwidth and 1000 V/µs slew rate make it useful for amplifying or isolating pulsed, sinusoidal, and edge-rich signals. The low quiescent current also supports compact multi-channel systems, although total channel power and thermal behavior should be checked as channel count increases. Keep the feedback path short and use a clean return connection to minimize measurement error.

🌐

Communications Front-End Signal Paths

The AD8007ARZ can be used in communications-related signal-conditioning stages where wide bandwidth and low distortion are more important than micropower operation. Its listed 650 MHz bandwidth, 1000 V/µs slew rate, and single-amplifier 8-pin SOIC package support compact high-speed analog channels. Analog Devices specifically describes the AD8007 as usable across a wide range of applications because of its performance and low quiescent current. Designers should still evaluate channel gain, source impedance, permissible output swing, and stability at the operating frequency.

📡

High-Speed ADC and DAC Interface

The AD8007ARZ is suitable for buffering high-speed ADC or DAC outputs when the interface requires low distortion and rapid slew performance. The amplifier's 650 MHz bandwidth and 1000 V/µs slew rate can reduce the loading presented to the converter when used with suitable source and termination networks. Actual interface suitability depends on converter edge rates, output impedance, sampling rate, and required settling time, none of which are established by the available device listing. Confirm the complete converter timing specification and use short PCB routing for the high-speed path.

📱

Precision Waveform Generation

The AD8007ARZ can amplify and buffer generated waveforms when fast edges and low distortion are important. A 1000 V/µs slew rate allows the output to follow rapidly changing signals, while the 650 MHz listed bandwidth supports high-frequency operating conditions. Low noise and low quiescent current are useful in laboratory or compact embedded systems where signal integrity and channel density both matter. Select the closed-loop gain carefully, observe the manufacturer's stability requirements, and ensure the connected load remains within the amplifier's operating limits.

Ringkasan Produk Disebarkan

AD8007ARZ Analog Devices Dipergunakan di: High-Speed Video Signal Conditioning, Active Filtering and Frequency Response, Test and Measurement Instrumentation, Communications Front-End Signal Paths, High-Speed ADC and DAC Interface, Precision Waveform Generation AD8008 Dual-member AD8007-family amplifier option Dipergunakan di: High-Speed Video Signal Conditioning, Communications Front-End Signal Paths AD8007AR AD8007-family ordering option Dipergunakan di: Active Filtering and Frequency Response, High-Speed ADC and DAC Interface AD8007ARZ-RL AD8007-family source option Dipergunakan di: Test and Measurement Instrumentation AD8007ARZ-R7 AD8007-family sourcing option Dipergunakan di: Precision Waveform Generation
What is the AD8007ARZ and what are its key specifications?
The AD8007ARZ is a single current-feedback amplifier optimized for high-speed, low-distortion signal conditioning. According to the Analog Devices product page, it combines a 650 MHz bandwidth, 1000 V/µs slew rate, 5 V to 12 V supply range, and low quiescent current in an 8-pin SOIC package. These characteristics make it appropriate for wideband buffers, active filters, test and measurement circuits, and communications or video signal paths.
What is the operating voltage of the AD8007ARZ?
The AD8007ARZ operates from 5 V to 12 V, as identified in the AD8007ARZ datasheet specifications. The manufacturer product page describes the AD8007 as a high-performance current-feedback amplifier built using its XFCB bipolar process. For a practical design, confirm the exact supply limits, output-swing limits, and recommended supply bypassing for the selected gain and load in the manufacturer datasheet.
What is the bandwidth and slew rate of the AD8007ARZ?
The AD8007ARZ has a listed bandwidth of 650 MHz and a slew rate of 1000 V/µs. According to the AD8007ARZ datasheet information, these values identify the device as a high-speed current-feedback amplifier. Actual usable bandwidth depends on the configured closed-loop gain, feedback resistor value, source impedance, load, and board parasitics, so use the manufacturer curves rather than assuming 650 MHz at every gain.
Where can I download the AD8007ARZ datasheet PDF?
The official AD8007ARZ datasheet is accessible through Analog Devices' AD8007 product page at https://www.analog.com/en/products/ad8007.html. Select the datasheet or PDF link for the complete electrical characteristics, pin assignments, power-supply requirements, gain curves, and application information. The product page is also the best starting point for current lifecycle and purchasing information.
Where is the AD8007ARZ pinout located?
The AD8007ARZ pin assignments are shown in the manufacturer datasheet linked from the official AD8007 product page. The verified device configuration is an 8-pin SOIC with the amplifier's inverting input, non-inverting input, output, positive supply, negative supply, and no-connect positions. Use the pin-description table when assigning PCB tracks and confirm exposed-pad requirements, if any, against the package drawing.
AD8007ARZ vs AD8007AR — which one should I choose?
Choose the exact ordering code that matches your required temperature grade and approved package variant. Both AD8007ARZ and AD8007AR identify the AD8007 family, but suffix differences can affect grade or packaging requirements even when the electrical core and SOIC footprint remain related. For a drop-in production decision, compare the complete ordering information, temperature range, marking, and tape-and-reel orientation before releasing the BOM.
Can AD8007ARZ-RL replace AD8007ARZ on the same PCB?
AD8007ARZ-RL is identified as an AD8007-family single current-feedback amplifier in an 8-pin SOIC package, so it is the closest verified same-footprint option. Because the suffix denotes ordering or packaging information, verify temperature grade, reel orientation, quantity, and markings before substitution. Pin compatibility alone does not confirm that a sourcing change satisfies automotive, industrial, or traceability requirements.
What is the best drop-in replacement for the AD8007ARZ?
The closest verified drop-in choices are AD8007ARZ-RL, AD8007ARZ-R7, AD8007ARZ1, and AD8007AR, all associated with the AD8007 family and 8-pin SOIC listings where specified. No independently verified cross-brand part was established as fully pin-compatible with the same bandwidth, slew rate, supply range, and feedback topology. Treat each candidate as a family sourcing option and confirm its complete datasheet ordering information before substitution.
What can replace the AD8007ARZ?
AD8007ARZ-RL, AD8007ARZ-R7, AD8007ARZ1, and AD8007AR are the verified AD8007-family alternatives for an AD8007ARZ sourcing review. They provide the most defensible path because the available listings identify the same amplifier family and 8-pin SOIC configuration. Because each replacement changes ordering details rather than core amplifier technology, verify package orientation, temperature grade, lifecycle status, and performance limits for the target design.
When should I choose the AD8007ARZ over a lower-speed amplifier?
Choose the AD8007ARZ when the signal path needs high bandwidth, fast slew, and low distortion beyond the capabilities of a general-purpose operational amplifier. Its 650 MHz listed bandwidth and 1000 V/µs slew rate are valuable for wideband buffers, waveform generation, video conditioning, and test equipment. A lower-speed amplifier may be preferable when input bandwidth, settling behavior, power, and cost are more important than high-speed slew performance.
Is the AD8007ARZ suitable for video and high-speed instrumentation?
The AD8007ARZ is suitable for many video and high-speed instrumentation signal paths because it is specified as a 650 MHz current-feedback amplifier with a 1000 V/µs slew rate and ultralow distortion. The manufacturer identifies video-style broad applications as one reason for its high-bandwidth design. Check the gain, output-swing, load, and stability requirements against the manufacturer curves before fixing the gain and feedback network.
How should a current-feedback AD8007ARZ circuit be laid out?
Place the feedback resistor, input resistor, and bypass capacitors close to their associated AD8007ARZ pins, and keep feedback loops physically short. According to the AD8007 family documentation, current-feedback amplifier stability is affected by the feedback network and source impedance. Use short ground returns, a quiet ground reference, and the manufacturer's recommended component values to minimize ringing, distortion, and gain errors.
Where can I buy the AD8007ARZ and check current availability?
Use the Request a Quote form on this page to request the AD8007ARZ price, current stock position, minimum order quantity, and lead time. The form provides a single direct channel for commercial inquiry without relying on potentially stale catalog figures. When requesting a quote, include your required quantity, packaging preference, target date, and whether the AD8007ARZ or an AD8007-family alternative is acceptable.
Is the AD8007ARZ active and available for new designs?
Analog Devices continues to present the AD8007 product page and an authorized sample-and-buy path, indicating that the AD8007 family remains available for design activity. For current production status, ordering conditions, and lifecycle commitments, confirm the information displayed on the official Analog Devices product page. Use the Request a Quote form on this page for current commercial availability and lead-time confirmation.
What are the key AD8007ARZ specifications engineers should know?
The key AD8007ARZ specifications are its single current-feedback architecture, 650 MHz bandwidth, 1000 V/µs slew rate, 5 V to 12 V supply range, and 8-pin SOIC package. Analog Devices also describes ultralow distortion, low noise, and low quiescent current as defining benefits of its XFCB implementation. Use these figures as the starting point for bandwidth, slew, power-supply, and PCB-footprint evaluation.

Data referensi kejuruteraan untuk AD8007ARZ — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the AD8007ARZ for high-speed analog paths that need the verified combination of 650 MHz bandwidth, 1000 V/µs slew rate, low noise, low distortion, and low quiescent current in an 8-pin SOIC package. It is well suited to video conditioning, active filtering, waveform generation, test equipment, and communications interfaces. Select AD8007AR, AD8007ARZ-RL, AD8007ARZ-R7, AD8007ARZ1, or AD8007 when an approved AD8007-family ordering code better matches packaging, grade, or procurement requirements. These alternatives preserve the same core amplifier technology and footprint, so their key differences are ordering-specific rather than a change in bandwidth or slew rate. For applications requiring two independent amplifier channels, evaluate the AD8008 dual family instead. Before finalizing any substitution, verify the complete manufacturer ordering information, temperature rating, reel orientation, lifecycle status, and the feedback-network requirements for the intended closed-loop gain.

Perbandingan dengan Gantian

Parametr Produk Ini AD8007AR AD8007ARZ-RL AD8007ARZ-R7 AD8007ARZ1 AD8007
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC

Penyeberangsung Jelas

  • Combines very high bandwidth with fast slew performance (vsAD8007AR)
  • Single-amplifier configuration reduces board space in multi-channel designs (vsAD8008)
  • Low-noise, low-distortion performance suited to precision high-speed paths (vsAD8007ARZ-RL)
  • Wide operating supply range for conventional positive analog rails (vsAD8007ARZ-R7)

Catatan Desain

Keep the current-feedback loop physically short by placing the feedback resistor close to the inverting input and output pins. High-speed parasitic inductance and capacitance inside the feedback loop can create ringing or unstable frequency response. Route the non-inverting input and feedback return as short as practical, and follow the manufacturer's recommended gain resistor values because arbitrary resistor substitutions can materially change bandwidth and stability.

Use the manufacturer's recommended supply bypassing arrangement and place each decoupling capacitor directly across the corresponding supply and ground pins. The AD8007ARZ operates from 5 V to 12 V, but adequate local bypass energy is still required to preserve low-distortion operation during fast output transitions. Keep the supply return path short and connect it to a quiet analog ground plane without sharing long current paths with switching circuitry.

Do not treat the listed 650 MHz bandwidth as a closed-loop bandwidth specification at every gain. Current-feedback amplifiers have gain-dependent bandwidth, and their stability also depends on the feedback resistor, source impedance, and load. Before releasing a layout, evaluate the intended gain and source resistance using the manufacturer gain-bandwidth and stability information, then check the assembled circuit for peaking, overshoot, and unintended oscillation.

For high-speed signal routing, minimize connector and test-point discontinuities, use a controlled-impedance path when the board stackup permits, and keep sensitive input nodes away from clock and switching nodes. A short ground reference adjacent to the amplifier is more effective than a long connection to a distant ground point. If the source has nonzero output capacitance, include that capacitance in stability and settling calculations before assigning the final resistor values.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

No specific environmental or automotive compliance declaration was identified for the exact AD8007ARZ ordering code.

Data disahkan pada: 2026-11-18 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

AD8007ARZ AD8007ARZ datasheet AD8007ARZ datasheet pdf AD8007ARZ pinout AD8007ARZ equivalent AD8007ARZ replacement AD8007ARZ cross reference AD8007ARZ vs AD8007AR AD8007ARZ 650MHz amplifier AD8007ARZ 1000V/us Analog Devices AD8007ARZ AD8007ARZ 8-SOIC footprint AD8007ARZ video amplifier AD8007ARZ price AD8007ARZ stock

Komponen dan Tanda berkaitan

Analog Devices AD8007ARZ AD8007AR AD8007ARZ-RL AD8007ARZ-R7 AD8007ARZ1 AD8007 AD8008 current-feedback amplifier current feedback high-speed amplifier analog amplifier IC signal-conditioning IC semiconductor XFCB process second-generation complementary bipolar process 650 MHz bandwidth 1000 V/µs slew rate 5 V to 12 V supply 8-pin SOIC SOIC package surface-mount package active filter video signal conditioning test and measurement instrumentation
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ