Analog Devices

AD9547BCPZ - 725 MHz Clock Synchronizer | Analog Devices

MPN: AD9547BCPZ ✓ Active
64-LFCSP-VQ, 9 mm x 9 mm Package 725 MHz Speed
MOQ: 1 |

AD9547BCPZ Overview

The Analog Devices AD9547BCPZ is a network clock generator and synchronizer with a maximum listed frequency of 725 MHz, one output, and a 64-lead LFCSP-VQ package measuring 9 mm by 9 mm. It is designed for synchronization applications involving Ethernet, SONET/SDH, and Stratum timing networks. The device accepts reference input frequencies from 1 kHz to 750 MHz and provides two pairs of reference input pins.

A network clock synchronizer is a specialized clock-and-timing IC that distributes a coherent reference while monitoring source quality, transferring between references, and maintaining timing during holdover. The AD9547 belongs to the clock generator and synchronizer hierarchy within application-specific timing integrated circuits, supporting communication infrastructure that depends on accurate frequency distribution and stable clock references.

The AD9547 supports Stratum 2 stability in holdover mode, reference switchover with phase build-out, and hitless reference switchover. Automatic and manual holdover control allow a system to manage transitions between external references. Each pair of reference inputs can operate as one differential input or as two independent single-ended inputs, providing flexibility for telecommunications and synchronization equipment.

Reference validation and monitoring add another layer of system control. The manufacturer documentation describes a 20-bit representation for inner and outer tolerance values, including hysteresis used by the monitor decision logic. This monitoring architecture helps distinguish acceptable references from degraded or failed sources and supports deterministic network behavior during reference transitions.

Typical applications include telecom timing equipment, Ethernet synchronization systems, SONET/SDH infrastructure, Stratum 2 network nodes, and test or measurement systems that require a traceable common clock. The 9 mm by 9 mm LFCSP-VQ package supports compact designs, but its exposed thermal pad and high-speed interfaces require careful PCB implementation, controlled reference routing, and exact power-and-ground decoupling.

When laying out a circuit, treat every high-frequency reference and clock path as a controlled-impedance transmission line. Place decoupling immediately across the supply pins, keep the exposed-pad thermal connection continuous, and follow the manufacturer pin-description table when assigning all 64 package connections. Accurate component placement and reference isolation are essential for preserving synchronization performance.

This page combines the manufacturer specifications, source documentation, product-family constraints, and practical implementation considerations needed to evaluate the AD9547BCPZ. It also distinguishes confirmed drop-in substitutions from components that merely provide a related clock function, helping engineers avoid PCB rework and unintended protocol or pin-function differences.

Drop-in alternatives for AD9547BCPZ — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

No drop-in alternatives available for this product.

Request Alternatives

AD9547BCPZ Specifications

Device Type Dual/quad input network clock generator/synchronizer
Maximum Listed Frequency 725 MHz
Output Count 1 output
Reference Input Frequency Range 1 kHz to 750 MHz
Reference Input Configuration 2 pairs; each pair configurable as differential or as 2 independent single-ended inputs
Package 64-LFCSP-VQ, 9 mm x 9 mm
Holdover Performance Supports Stratum 2 stability in holdover mode
Reference Switchover Supports phase build-out and hitless reference switchover
Holdover Control Automatic or manual
Reference Validation Supported
Tolerance Encoding Resolution 20-bit
Monitor Decision Hysteresis Provided by separate inner and outer tolerance values
Target Applications Ethernet, SONET/SDH, and Stratum timing systems
RoHS Status Compliant
Recommended for New Designs Yes

AD9547BCPZ 64-lfcsp-vq, 9 mm x 9 mm Pin Configuration Guide

Pin configuration for AD9547BCPZ (64-lfcsp-vq, 9 mm x 9 mm package). Pin numbering, functions, and connection diagrams are defined in the manufacturer datasheet. Refer to it for the exact footprint and soldering guidelines.

64-lfcsp-vq, 9 mm x 9 mm package pinout diagram for AD9547BCPZ

No detailed pinout data available for AD9547BCPZ.

Refer to the datasheet for full pin configuration.

Typical Applications

AD9547BCPZ is suitable for 6 applications: Telecom Network Synchronization, SONET and SDH Timing, Ethernet Timing Equipment, Stratum 2 Network Nodes, Instrumentation and Test Systems, Industrial Clock Distribution.

🌐

Telecom Network Synchronization

The AD9547BCPZ fits telecom equipment that must distribute a common timing reference while monitoring the quality of external clocks. Its two configurable reference-input pairs accept frequencies from 1 kHz to 750 MHz, while automatic or manual holdover provides continuity during source transitions. Stratum 2 stability in holdover mode is especially relevant to synchronization nodes whose timing quality must remain predictable during reference disturbances. The single output supports systems that need one carefully conditioned common clock rather than multiple independent outputs.

🌐

SONET and SDH Timing

The AD9547BCPZ is appropriate for SONET/SDH infrastructure where the system must select, validate, and transfer timing references without unacceptable clock discontinuities. Hitless reference switchover and phase build-out help maintain output continuity when the active source changes, while reference validation identifies unsuitable inputs. The broad 1 kHz to 750 MHz input range covers reference paths commonly encountered in telecommunications equipment. Its 64-lead package supports integration but requires a carefully partitioned clock and power layout.

🌐

Ethernet Timing Equipment

The AD9547BCPZ can support Ethernet timing equipment requiring a disciplined common clock, validated references, and controlled holdover behavior. Its reference pairs can accept differential or single-ended arrangements, allowing the design to adapt to different source interfaces. Phase build-out and hitless switching reduce disruption during reference transfer, while Stratum 2 holdover stability helps maintain timing quality during upstream disturbances. Designers should evaluate the complete system's timing budget and comply with applicable network timing requirements.

🖥️

Stratum 2 Network Nodes

The AD9547BCPZ is well matched to Stratum-oriented network nodes that require reference monitoring and stable behavior during holdover. Separate inner and outer tolerance representations add hysteresis to monitor decisions, helping prevent repeated switching around a threshold. Automatic and manual holdover modes give equipment designers control over how the system responds when a reference becomes invalid. The device's one-output topology is suitable for systems centered on a single distributed synchronization clock.

🔧

Instrumentation and Test Systems

The AD9547BCPZ can provide a synchronized reference in instrumentation where multiple internal subsystems must operate from a coherent timing source. Reference validation and hitless switching improve system resilience, while the configurable input pairs simplify adaptation to laboratory reference architectures. The 725 MHz listed device rate and 750 MHz input range cover high-speed clocking requirements. Precise layout, clean references, and continuous exposed-pad grounding remain essential to avoid degrading timing quality.

🏭

Industrial Clock Distribution

The AD9547BCPZ can serve industrial systems that need a monitored, fault-tolerant timing reference rather than a free-running clock. Its holdover, reference validation, and controlled switchover functions support deterministic behavior when an external source changes or becomes unreliable. The broad reference-input range accommodates varied industrial clock sources, and the differential or single-ended input flexibility simplifies source integration. Because the device uses a dense 64-lead LFCSP-VQ package, assembly planning and high-speed PCB constraints should be resolved early.

Recommended Products Summary

AD9547BCPZ Analog Devices Used in: Telecom Network Synchronization, SONET and SDH Timing, Ethernet Timing Equipment, Stratum 2 Network Nodes, Instrumentation and Test Systems, Industrial Clock Distribution AD9547/PCBZ AD9547 evaluation platform Used in: Telecom Network Synchronization, SONET and SDH Timing, Ethernet Timing Equipment, Stratum 2 Network Nodes, Instrumentation and Test Systems, Industrial Clock Distribution
What is the AD9547BCPZ?
The AD9547BCPZ is an Analog Devices network clock generator and synchronizer intended for Ethernet, SONET/SDH, and Stratum timing systems. According to the AD9547 Rev. H datasheet, it uses a dual/quad-input architecture, supports one output, and accepts reference frequencies from 1 kHz to 750 MHz. The device is supplied in a 64-LFCSP-VQ package measuring 9 mm by 9 mm.
What are the key specifications of AD9547BCPZ that engineers should know?
The AD9547BCPZ combines a listed maximum frequency of 725 MHz, one clock output, and reference inputs spanning 1 kHz to 750 MHz. According to the AD9547 Rev. H datasheet, it supports Stratum 2 stability in holdover, automatic or manual holdover, reference validation, phase build-out, and hitless reference switchover. Its 64-LFCSP-VQ 9 mm by 9 mm package requires careful high-speed layout and exposed-pad thermal management.
Where can I download the AD9547BCPZ datasheet PDF?
The AD9547BCPZ datasheet is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/AD9547.pdf. The linked document is the AD9547 Rev. H data sheet and contains the device description, architecture, electrical characteristics, reference-input information, and application guidance needed to evaluate the BCPZ package option.
Where can I find the AD9547BCPZ pinout?
The authoritative AD9547BCPZ pin assignments are in the Pin Description table of the AD9547 Rev. H manufacturer datasheet. Use that table when assigning all 64 leads of the 9 mm by 9 mm LFCSP-VQ package. The AD9547BCPZ package is not represented by the exact canonical package-diagram key used on this page, so a lead-by-lead rendered pin diagram is not presented here.
Does the AD9547BCPZ support differential reference inputs?
Yes. The AD9547BCPZ provides two pairs of reference input pins, and each pair can be configured as either one differential input or two independent single-ended inputs. According to the AD9547 Rev. H datasheet, input reference frequencies can range from 1 kHz to 750 MHz, giving the device flexibility for differential telecom clocks as well as separate single-ended sources.
What holdover functions are supported by the AD9547BCPZ?
The AD9547BCPZ supports Stratum 2 stability in holdover mode and provides automatic or manual holdover operation. According to the AD9547 Rev. H datasheet, it also supports reference switchover with phase build-out and hitless reference switchover. These functions help a synchronization system preserve clock continuity while validating or changing its active reference.
How does the AD9547BCPZ validate reference sources?
The AD9547BCPZ includes reference validation and represents tolerance values with 20-bit numbers. The manufacturer Rev. H datasheet explains that separate inner and outer tolerance values provide hysteresis for the monitor decision logic, helping the device classify references consistently rather than repeatedly switching when a source is close to an acceptance threshold.
What is the difference between the AD9547 and AD9547BCPZ?
The AD9547 is the network clock generator/synchronizer family, while AD9547BCPZ identifies its 64-lead LFCSP-VQ 9 mm by 9 mm ordering option. The manufacturer documentation identifies AD9547BCPZ for new designs and lists Ethernet, SONET/SDH, and Stratum applications. Other AD9547 order codes may differ in temperature range, packing, or qualification and must be checked before being treated as equivalents.
Is AD9547BCPZ suitable for a Stratum 2 synchronization network?
Yes. The AD9547BCPZ supports Stratum 2 stability in holdover mode, reference validation, automatic or manual holdover, and hitless reference switchover. According to the AD9547 Rev. H datasheet, these features suit telecom and packet-network equipment requiring stable reference transfer, although overall Stratum compliance also depends on the complete system design, clock source quality, and network configuration.
When should I choose AD9547BCPZ over another network clock synchronizer?
Choose AD9547BCPZ when the design needs a dedicated dual/quad-input network synchronizer with reference inputs from 1 kHz to 750 MHz, one output, Stratum 2 holdover support, and hitless switching. Select another synchronizer only when its reference topology, output count, protocol handling, package, electrical limits, and qualification satisfy the complete system requirements rather than merely offering a similar clock-generation function.
What can replace the AD9547BCPZ?
No confirmed pin-to-pin drop-in replacement is identified for the AD9547BCPZ. A valid replacement must match the 64-LFCSP-VQ footprint, pin functions, reference-input architecture, operating limits, output characteristics, and synchronization behavior. The AD9547 family includes ordering and packing variants, but packaging codes alone do not establish electrical or pin compatibility for every variant.
Is the AD9547BCPZ the same as AD9547BCPZ-RL7?
AD9547BCPZ and AD9547BCPZ-RL7 are order codes within the AD9547 family, but the suffix identifies a different ordering option and should not be assumed to have identical packaging, temperature, qualification, or lifecycle conditions. Check the AD9547 product-selection table and the ordering guide before substituting one code for the other in a regulated or production design.
How should the AD9547BCPZ be placed on a PCB?
Place the AD9547BCPZ on a solid, uninterrupted ground plane and preserve continuity across its exposed thermal pad. Place supply-decoupling components close to the relevant pins and route high-frequency reference and clock signals as controlled-impedance nets with short paths and minimal discontinuity. Follow the Rev. H datasheet layout and reference-design guidance for the final topology.
Where can I buy AD9547BCPZ and check its current lead time?
Use the Request a Quote form on this page to request the current AD9547BCPZ price, stock position, and lead time. The Request a Quote workflow provides a direct response without relying on static pricing that can become outdated. Confirm the exact AD9547BCPZ order code and package requirement when submitting the request.
What is the lead time for AD9547BCPZ?
Current lead time for the AD9547BCPZ should be requested through the Request a Quote form on this page. Lead time can vary with order quantity, package configuration, and manufacturing availability, so it should be confirmed for the exact order code. The manufacturer lists AD9547 for new designs, which supports active product planning but does not guarantee immediate allocation.
Is AD9547BCPZ in stock?
Current inventory for AD9547BCPZ can be requested through the Request a Quote form on this page. Because availability can change with order volume and replenishment cycles, request the quantity and target date for the exact AD9547BCPZ order code. The product page and manufacturer listing identify the device for new designs but do not constitute a live allocation guarantee.

Engineering reference data for AD9547BCPZ — comparison, design guidance, and compliance information.

Selection Guide

Choose the AD9547BCPZ when a synchronization system needs two configurable reference-input pairs, one synchronized output, reference validation, Stratum 2 holdover stability, and controlled hitless reference transfer. It is particularly appropriate for Ethernet, SONET/SDH, and Stratum-oriented telecom equipment. Do not substitute a generic 725 MHz clock generator unless it independently provides the required holdover, validation, switchover, and jitter behavior; equal maximum frequency alone does not establish equivalent performance. Do not treat another AD9547 ordering code as a confirmed drop-in option without checking its package, temperature grade, qualification, and ordering details. For a new evaluation, the AD9547/PCBZ platform can assist with clock-source and reference-switching experiments before integrating the 64-lead BCPZ device. Final selection should also account for the exact supply limits, operating temperature, electrical characteristics, and reference-design layout guidance published in the AD9547 Rev. H datasheet.

Comparison with Alternatives

Parameter This Product
Brand Analog Devices
Package 64-LFCSP-VQ, 9 mm x 9 mm
Device Function Dual/quad input network clock generator/synchronizer
Maximum Listed Frequency 725 MHz
Output Count 1 output
Reference Input Frequency Range 1 kHz to 750 MHz
Holdover Stratum 2 stability; automatic or manual
Reference Switchover Phase build-out and hitless switchover
Reference Validation Supported with 20-bit inner and outer tolerance encoding
RoHS Status Compliant

Key Differentiators

  • Purpose-built synchronization rather than generic clock generation (vs AD9547/PCBZ)
  • Broad configurable reference architecture (vs AD9547BCPZ-RL7)
  • Deterministic holdover and switching behavior (vs Generic 725 MHz clock generator)

Design Notes

Treat reference and clock connections as high-speed controlled-impedance nets. Keep traces short, minimize stubs and unnecessary layer changes, provide a continuous return path, and observe the impedance and spacing guidance in the AD9547 Rev. H datasheet. Use the pin-description table to confirm every connection because the 64-LFCSP-VQ footprint has no unassigned pins that can safely be treated as interchangeable.

Preserve a continuous ground connection beneath the exposed thermal pad and follow the manufacturer's land pattern for via placement. Thermal performance depends on board construction, copper area, and airflow, so estimate the junction rise using the actual PCB stack-up rather than relying on a generic package value. Maintain clearances from heat sources and verify temperature rise at the highest expected operating frequency and ambient condition.

Do not treat a family member with a different ordering suffix as automatically interchangeable without checking temperature grade, packing, qualification, and pin-related ordering details. Likewise, do not assume that any clock generator with a similar package is a drop-in replacement. The AD9547BCPZ requires compatible reference topology, output behavior, synchronization functions, electrical limits, and exact lead assignments.

Decouple the supply pins directly at the device and maintain a low-impedance ground reference beneath and around the package. Keep sensitive reference inputs away from noisy switching nodes, and use symmetric routing when the inputs are configured differentially. Validate rise time, jitter, and reference switching performance on the final board because enclosure, connectors, and power-supply layout can affect the usable clock quality.

Compliance Information

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

RoHS-compliant status is listed for AD9547BCPZ. No verified REACH, halogen-free, conflict-minerals, or automotive-qualification statement is available for this ordering option.

Data verified on: 2026-11-19 — data verified and curated by XAIPART's component engineering team

Related Searches

AD9547BCPZ datasheet AD9547BCPZ pinout AD9547BCPZ datasheet pdf AD9547BCPZ 725MHz AD9547BCPZ 64-LFCSP-VQ AD9547BCPZ equivalent AD9547BCPZ replacement AD9547BCPZ cross reference AD9547BCPZ price AD9547BCPZ stock Analog Devices AD9547BCPZ AD9547BCPZ Stratum 2 holdover AD9547BCPZ reference switchover AD9547BCPZ vs AD9547BCPZ-RL7 AD9547BCPZ network synchronizer

Related Components & Terms

Analog Devices AD9547 AD9547BCPZ AD9547BCPZ-RL7 AD9547/PCBZ network clock generator clock synchronizer application-specific timing IC clock-and-timing integrated circuit Stratum 2 holdover hitless reference switchover phase build-out reference validation differential reference input single-ended reference input 20-bit tolerance encoding monitor decision hysteresis Ethernet timing SONET/SDH 64-LFCSP-VQ LFCSP-VQ package family surface-mount package RoHS
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details