AD9547BCPZ - 725 MHz Clock Synchronizer | Analog Devices
部品番号: AD9547BCPZ ✓ 生産中AD9547BCPZ 概要
A network clock synchronizer is a specialized clock-and-timing IC that distributes a coherent reference while monitoring source quality, transferring between references, and maintaining timing during holdover. The AD9547 belongs to the clock generator and synchronizer hierarchy within application-specific timing integrated circuits, supporting communication infrastructure that depends on accurate frequency distribution and stable clock references.
The AD9547 supports Stratum 2 stability in holdover mode, reference switchover with phase build-out, and hitless reference switchover. Automatic and manual holdover control allow a system to manage transitions between external references. Each pair of reference inputs can operate as one differential input or as two independent single-ended inputs, providing flexibility for telecommunications and synchronization equipment.
Reference validation and monitoring add another layer of system control. The manufacturer documentation describes a 20-bit representation for inner and outer tolerance values, including hysteresis used by the monitor decision logic. This monitoring architecture helps distinguish acceptable references from degraded or failed sources and supports deterministic network behavior during reference transitions.
Typical applications include telecom timing equipment, Ethernet synchronization systems, SONET/SDH infrastructure, Stratum 2 network nodes, and test or measurement systems that require a traceable common clock. The 9 mm by 9 mm LFCSP-VQ package supports compact designs, but its exposed thermal pad and high-speed interfaces require careful PCB implementation, controlled reference routing, and exact power-and-ground decoupling.
When laying out a circuit, treat every high-frequency reference and clock path as a controlled-impedance transmission line. Place decoupling immediately across the supply pins, keep the exposed-pad thermal connection continuous, and follow the manufacturer pin-description table when assigning all 64 package connections. Accurate component placement and reference isolation are essential for preserving synchronization performance.
This page combines the manufacturer specifications, source documentation, product-family constraints, and practical implementation considerations needed to evaluate the AD9547BCPZ. It also distinguishes confirmed drop-in substitutions from components that merely provide a related clock function, helping engineers avoid PCB rework and unintended protocol or pin-function differences.
ドロップイン代替品: AD9547BCPZ — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
この製品に利用可能なドロップイン代替品はありません。
代替品をリクエストAD9547BCPZ 仕様
| Device Type | Dual/quad input network clock generator/synchronizer |
| Maximum Listed Frequency | 725 MHz |
| Output Count | 1 output |
| Reference Input Frequency Range | 1 kHz to 750 MHz |
| Reference Input Configuration | 2 pairs; each pair configurable as differential or as 2 independent single-ended inputs |
| パッケージ | 64-LFCSP-VQ, 9 mm x 9 mm |
| Holdover Performance | Supports Stratum 2 stability in holdover mode |
| Reference Switchover | Supports phase build-out and hitless reference switchover |
| Holdover Control | Automatic or manual |
| Reference Validation | Supported |
| Tolerance Encoding Resolution | 20-bit |
| Monitor Decision Hysteresis | Provided by separate inner and outer tolerance values |
| Target Applications | Ethernet, SONET/SDH, and Stratum timing systems |
| RoHS ステータス | Compliant |
| Recommended for New Designs | Yes |
AD9547BCPZ 64-lfcsp-vq, 9 mm x 9 mm ピン配置ガイド
AD9547BCPZ (64-lfcsp-vq, 9 mm x 9 mm パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。
詳細なピン配置データはありません: AD9547BCPZ.
詳細は データシート をご参照ください。
主な用途
AD9547BCPZ の用途: 6 件s: Telecom Network Synchronization, SONET and SDH Timing, Ethernet Timing Equipment, Stratum 2 Network Nodes, Instrumentation and Test Systems, Industrial Clock Distribution.
Telecom Network Synchronization
The AD9547BCPZ fits telecom equipment that must distribute a common timing reference while monitoring the quality of external clocks. Its two configurable reference-input pairs accept frequencies from 1 kHz to 750 MHz, while automatic or manual holdover provides continuity during source transitions. Stratum 2 stability in holdover mode is especially relevant to synchronization nodes whose timing quality must remain predictable during reference disturbances. The single output supports systems that need one carefully conditioned common clock rather than multiple independent outputs.
おすすめ
SONET and SDH Timing
The AD9547BCPZ is appropriate for SONET/SDH infrastructure where the system must select, validate, and transfer timing references without unacceptable clock discontinuities. Hitless reference switchover and phase build-out help maintain output continuity when the active source changes, while reference validation identifies unsuitable inputs. The broad 1 kHz to 750 MHz input range covers reference paths commonly encountered in telecommunications equipment. Its 64-lead package supports integration but requires a carefully partitioned clock and power layout.
おすすめ
Ethernet Timing Equipment
The AD9547BCPZ can support Ethernet timing equipment requiring a disciplined common clock, validated references, and controlled holdover behavior. Its reference pairs can accept differential or single-ended arrangements, allowing the design to adapt to different source interfaces. Phase build-out and hitless switching reduce disruption during reference transfer, while Stratum 2 holdover stability helps maintain timing quality during upstream disturbances. Designers should evaluate the complete system's timing budget and comply with applicable network timing requirements.
おすすめ
Stratum 2 Network Nodes
The AD9547BCPZ is well matched to Stratum-oriented network nodes that require reference monitoring and stable behavior during holdover. Separate inner and outer tolerance representations add hysteresis to monitor decisions, helping prevent repeated switching around a threshold. Automatic and manual holdover modes give equipment designers control over how the system responds when a reference becomes invalid. The device's one-output topology is suitable for systems centered on a single distributed synchronization clock.
おすすめ
Instrumentation and Test Systems
The AD9547BCPZ can provide a synchronized reference in instrumentation where multiple internal subsystems must operate from a coherent timing source. Reference validation and hitless switching improve system resilience, while the configurable input pairs simplify adaptation to laboratory reference architectures. The 725 MHz listed device rate and 750 MHz input range cover high-speed clocking requirements. Precise layout, clean references, and continuous exposed-pad grounding remain essential to avoid degrading timing quality.
おすすめ
Industrial Clock Distribution
The AD9547BCPZ can serve industrial systems that need a monitored, fault-tolerant timing reference rather than a free-running clock. Its holdover, reference validation, and controlled switchover functions support deterministic behavior when an external source changes or becomes unreliable. The broad reference-input range accommodates varied industrial clock sources, and the differential or single-ended input flexibility simplifies source integration. Because the device uses a dense 64-lead LFCSP-VQ package, assembly planning and high-speed PCB constraints should be resolved early.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: AD9547BCPZ — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 |
|---|---|
| Brand | Analog Devices |
| Package | 64-LFCSP-VQ, 9 mm x 9 mm |
| Device Function | Dual/quad input network clock generator/synchronizer |
| Maximum Listed Frequency | 725 MHz |
| Output Count | 1 output |
| Reference Input Frequency Range | 1 kHz to 750 MHz |
| Holdover | Stratum 2 stability; automatic or manual |
| Reference Switchover | Phase build-out and hitless switchover |
| Reference Validation | Supported with 20-bit inner and outer tolerance encoding |
| RoHS Status | Compliant |
主な差別化要因
- Purpose-built synchronization rather than generic clock generation (vs AD9547/PCBZ)
- Broad configurable reference architecture (vs AD9547BCPZ-RL7)
- Deterministic holdover and switching behavior (vs Generic 725 MHz clock generator)
設計ノート
Treat reference and clock connections as high-speed controlled-impedance nets. Keep traces short, minimize stubs and unnecessary layer changes, provide a continuous return path, and observe the impedance and spacing guidance in the AD9547 Rev. H datasheet. Use the pin-description table to confirm every connection because the 64-LFCSP-VQ footprint has no unassigned pins that can safely be treated as interchangeable.
Preserve a continuous ground connection beneath the exposed thermal pad and follow the manufacturer's land pattern for via placement. Thermal performance depends on board construction, copper area, and airflow, so estimate the junction rise using the actual PCB stack-up rather than relying on a generic package value. Maintain clearances from heat sources and verify temperature rise at the highest expected operating frequency and ambient condition.
Do not treat a family member with a different ordering suffix as automatically interchangeable without checking temperature grade, packing, qualification, and pin-related ordering details. Likewise, do not assume that any clock generator with a similar package is a drop-in replacement. The AD9547BCPZ requires compatible reference topology, output behavior, synchronization functions, electrical limits, and exact lead assignments.
Decouple the supply pins directly at the device and maintain a low-impedance ground reference beneath and around the package. Keep sensitive reference inputs away from noisy switching nodes, and use symmetric routing when the inputs are configured differentially. Validate rise time, jitter, and reference switching performance on the final board because enclosure, connectors, and power-supply layout can affect the usable clock quality.
コンプライアンス情報
RoHS-compliant status is listed for AD9547BCPZ. No verified REACH, halogen-free, conflict-minerals, or automotive-qualification statement is available for this ordering option.