AD977ACNZ - 16-Bit 200 kSPS SAR ADC | Analog Devices
MPN: AD977ACNZ ✓ ActiveAD977ACNZ Overview
An ADC is an interface IC that converts a continuous analog voltage into a numeric representation for processing, storage, or transmission. The AD977ACNZ belongs to the SAR ADC hierarchy, where a successive-approximation internal capacitor array compares the input against a generated reference voltage. Its 16-bit resolution provides 65,536 digital code levels, making it appropriate for measurement systems requiring substantially more resolution than ordinary 8-bit or 12-bit converters.
Key features include 16-bit resolution, 200 kSPS throughput, single 5 V operation, and maximum power dissipation of 100 mW. The device is factory calibrated and tested for signal-to-noise ratio and total harmonic distortion in addition to offset, gain, and linearity. The manufacturer identifies the AD977 family as a high-speed, low-power converter intended to balance conversion rate, accuracy, and power consumption.
Internally, the AD977 uses a factory-calibrated switched-capacitor SAR architecture and an internal 2.5 V reference. This architecture supports deterministic conversion behavior and allows the converter to operate from one supply rail, reducing the number of external power rails required by the analog front end. The verified product information identifies the AD977A as the 200 kSPS member of the AD977 and AD977A family.
Typical uses include industrial process-control loops, sensor-interface modules, laboratory measurement equipment, digital instrumentation, and embedded data-acquisition systems. In these applications, the converter can digitize slow or medium-rate sensor outputs while keeping supply complexity and power requirements low. A 20-pin PDIP package also supports through-hole assembly where board space and mechanical robustness are more important than minimal footprint area.
The primary design consideration is input conditioning. Keep analog traces short, provide a stable 5 V supply, and follow the manufacturer pinout and application guidance when connecting signal and reference circuitry. Verify the selected input range, acquisition timing, source impedance, and system noise requirements before sampling high-frequency or low-amplitude signals.
This page combines the exact AD977ACNZ identity, manufacturer specifications, package information, family-level replacement context, and practical application guidance. It is intended to help engineers distinguish genuine drop-in options from related converters that differ in speed, package, or qualification.
Drop-in alternatives for AD977ACNZ — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with AD977ACNZ (same form factor and footprint) — differing in Package, Resolution, Supply Voltage, Architecture, Data Interface.
AD977AANZ
✅ Drop-InContact for price
View Datasheet →AD977AAN
✅ Drop-InContact for price
View Datasheet →AD977ACNZ Maximum Ratings & Electrical Characteristics
| Converter Type | Successive-approximation ADC |
| Resolution | 16 bit |
| Throughput Rate | 200 kSPS |
| Number of Analog Inputs | 1 input |
| Architecture | Factory-calibrated switched-capacitor SAR |
| Supply Voltage | 5 V |
| Power Dissipation | 100 mW maximum |
| Internal Reference Voltage | 2.5 V |
| Full-Scale Input | ±10 V |
| Maximum Conversion Time | 4 µs |
| Operating Temperature Range | -40°C to +85°C |
| Package | 20-pin PDIP |
| Package Family | PDIP through-hole package |
AD977ACNZ pdip through-hole package Pin Configuration Guide
Pin configuration for AD977ACNZ (pdip through-hole package package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.
No detailed pinout data available for AD977ACNZ.
Refer to the datasheet for full pin configuration.
Typical Applications
AD977ACNZ is suitable for 6 applications: Industrial Process Measurement, Precision Sensor Interface, Laboratory Data Acquisition, Digital Instrumentation, Embedded Control Systems, Portable Measurement Equipment.
Industrial Process Measurement
The AD977ACNZ fits industrial process-measurement modules that digitize pressure, temperature, level, or process-current signals at moderate speed. Its 16-bit resolution provides 65,536 code levels, while the 200 kSPS rate is ample for many industrial loops and supervisory channels. The single 5 V supply and 100 mW maximum dissipation simplify isolated or compact field-instrument power budgets. Use an appropriate input driver and protection network, and ensure the source impedance satisfies the acquisition requirements in the manufacturer datasheet.
Recommended
Precision Sensor Interface
The AD977ACNZ is suitable for low-level sensor acquisition where 16-bit resolution, a 5 V supply, and 200 kSPS throughput are useful. It can digitize the output of suitable current-voltage or voltage-amplification stages in instrumentation systems. The factory-calibrated switched-capacitor SAR architecture supports accurate conversion without requiring a high-power conversion clock. Front-end design should control offset, gain, common-mode range, and noise because ADC resolution alone does not determine end-to-end measurement accuracy.
Recommended
Laboratory Data Acquisition
The AD977ACNZ can serve as the conversion element in a laboratory data-acquisition module for multichannel monitoring systems. A 200 kSPS per-converter rate supports general-purpose analog measurements without the power demands of a gigahertz-class ADC. Its 20-pin PDIP package is convenient for instrument prototyping and through-hole assembly. For accurate results, isolate sensitive analog routing, use a low-noise 5 V reference supply, and verify sampling timing and settling behavior with the intended source impedance.
Recommended
Digital Instrumentation
The AD977ACNZ is appropriate for digital panel meters, bench instruments, and measurement controllers that require more precision than a low-cost 8-bit or 12-bit converter. The 16-bit code width improves resolution across the selected analog input range, while the 200 kSPS rate allows rapid updates of the displayed or recorded value. The single 5 V operation simplifies integration around embedded controllers. Calibration tables should be based on the actual gain and offset measured for the completed analog channel.
Recommended
Embedded Control Systems
The AD977ACNZ can digitize control and monitoring signals in an embedded industrial controller when 200 kSPS throughput is sufficient for the control loop. Its low 100 mW maximum dissipation and single-supply architecture are useful where board space, converter count, or thermal load is constrained. Use the internal reference only when its noise and stability satisfy the application, and consider calibration and digital filtering when the target measurement has high source impedance or demanding accuracy requirements.
Recommended
Portable Measurement Equipment
The AD977ACNZ can support portable measurement equipment that converts moderate-rate analog inputs while maintaining limited power consumption. A single 5 V rail simplifies battery-derived system architecture, and the 20-pin PDIP package is appropriate for rugged prototypes or serviceable instrument boards. At only 200 kSPS, the device is best matched to temperature, pressure, flow, and slow waveform measurements rather than wideband signal capture. The analog front end should include protection appropriate to the connector and operating environment.
Recommended
Recommended Products Summary
Engineering reference data for AD977ACNZ — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | AD977AANZ | AD977AAN |
|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices |
| Package | 20-pin PDIP | 20-pin PDIP | 20-pin PDIP |
| Resolution | 16 bit | 16 bit | 16 bit |
| Throughput Rate | 200 kSPS | 200 kSPS | 200 kSPS |
| Converter Architecture | Successive-approximation switched-capacitor ADC | Successive-approximation switched-capacitor ADC | Successive-approximation switched-capacitor ADC |
| Supply Voltage | 5 V | 5 V | 5 V |
| Maximum Power Dissipation | 100 mW | 100 mW | 100 mW |
| Internal Reference | 2.5 V | 2.5 V | 2.5 V |
| Analog Input Count | 1 input | 1 input | 1 input |
Key Differentiators
- Higher throughput within the AD977A family (vs AD977ACN)
- Exact package and throughput retention (vs AD977AANZ)
- Single-supply low-power operation (vs AD977AAN)
Design Notes
Route the analog input directly to the converter and keep it away from clock and digital-output traces. Place the required supply-decoupling capacitors at the associated power pins, with short ground returns. Because the AD977ACNZ uses a 20-pin PDIP package, preserve adequate spacing for through-hole assembly and avoid placing tall or heat-sensitive components around the leads.
Verify the settling time and acquisition behavior for the intended source impedance before selecting the input-driver network. A long or resistive input path can reduce conversion accuracy even when the ADC is operated at 200 kSPS. Use the pin-description and application guidance in the manufacturer datasheet to establish source impedance, input range, reference grounding, and the timing relationship between sampling and conversion.
Design the 5 V rail with low noise because supply variations can affect a 16-bit measurement system even though the converter itself consumes no more than 100 mW. Decouple the supply at the device, preserve a low-impedance return path, and assess the internal 2.5 V reference against the required noise and stability. External calibration or filtering may be necessary when the application demands better end-to-end accuracy.
Do not interchange the AD977ACNZ with the 100 kSPS AD977 solely because both use a 20-pin PDIP package. The AD977ACNZ is associated with the 200 kSPS AD977A performance, while the original AD977 is specified at 100 kSPS. Confirm the exact ordering code, temperature grade, pinout, input range, and acquisition timing against the manufacturer datasheet before approving a substitution.
Compliance Information
Compliance declarations are not specified in the manufacturer product information or the available component listings. Verify RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status for the exact ordering code before release.