Analog Devices

AD977ACNZ - 16-Bit 200 kSPS SAR ADC | Analog Devices

MPN: AD977ACNZ ✓ Hoạt động
5 V Vdss 20-pin PDIP Package
MOQ: 1 |

AD977ACNZ Tóm tắt

The Analog Devices AD977ACNZ is a 16-bit, single-input successive-approximation ADC with a 200 kSPS throughput rate, a single 5 V supply, and a 20-pin PDIP package. It consumes no more than 100 mW and includes an internal 2.5 V reference. These characteristics position it as a compact, low-power data-conversion device for industrial instrumentation, process measurement, and precision analog signal acquisition.

An ADC is an interface IC that converts a continuous analog voltage into a numeric representation for processing, storage, or transmission. The AD977ACNZ belongs to the SAR ADC hierarchy, where a successive-approximation internal capacitor array compares the input against a generated reference voltage. Its 16-bit resolution provides 65,536 digital code levels, making it appropriate for measurement systems requiring substantially more resolution than ordinary 8-bit or 12-bit converters.

Key features include 16-bit resolution, 200 kSPS throughput, single 5 V operation, and maximum power dissipation of 100 mW. The device is factory calibrated and tested for signal-to-noise ratio and total harmonic distortion in addition to offset, gain, and linearity. The manufacturer identifies the AD977 family as a high-speed, low-power converter intended to balance conversion rate, accuracy, and power consumption.

Internally, the AD977 uses a factory-calibrated switched-capacitor SAR architecture and an internal 2.5 V reference. This architecture supports deterministic conversion behavior and allows the converter to operate from one supply rail, reducing the number of external power rails required by the analog front end. The verified product information identifies the AD977A as the 200 kSPS member of the AD977 and AD977A family.

Typical uses include industrial process-control loops, sensor-interface modules, laboratory measurement equipment, digital instrumentation, and embedded data-acquisition systems. In these applications, the converter can digitize slow or medium-rate sensor outputs while keeping supply complexity and power requirements low. A 20-pin PDIP package also supports through-hole assembly where board space and mechanical robustness are more important than minimal footprint area.

The primary design consideration is input conditioning. Keep analog traces short, provide a stable 5 V supply, and follow the manufacturer pinout and application guidance when connecting signal and reference circuitry. Verify the selected input range, acquisition timing, source impedance, and system noise requirements before sampling high-frequency or low-amplitude signals.

This page combines the exact AD977ACNZ identity, manufacturer specifications, package information, family-level replacement context, and practical application guidance. It is intended to help engineers distinguish genuine drop-in options from related converters that differ in speed, package, or qualification.

Bộ thay thế dễ dàng lắp đặt cho AD977ACNZ — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với AD977ACNZ (cùng hình factor và footprint) — khác nhau ở Package, Resolution, Supply Voltage, Architecture, Data Interface.

Analog Devices
Resolution: 16 bits
Architecture: SAR (Successive Approximation Register)
Data Interface: Parallel
So sánh với AD977ACNZ →
Analog Devices
Package: 20-pin through-hole DIP
Supply Voltage: 5 V single supply
So sánh với AD977ACNZ →
Analog Devices
Package: 20-pin PDIP, 0.300 in (7.62 mm) pitch
Data Interface: Serial, SPI-compatible
So sánh với AD977ACNZ →

AD977AANZ

✅ Drop-In
Analog Devices
📦 20-pin PDIP
Successive-approximation ADC · 16 bit · 1 channel · 200 kSPS · 5 V · 2.5 V · Supported · Switched-capacitor SAR

Liên hệ để biết giá

Xem tài liệu →

AD977AAN

✅ Drop-In
Analog Devices
📦 20-pin PDIP
Successive-approximation ADC · 16 bit · 200 kSPS · 100 kSPS · 5 V single supply · 5.25 V · 100 mW · 0 V to 5 V or 0 V to 4 V

Liên hệ để biết giá

Xem tài liệu →

AD977ACNZ Tỷ lệ tối đa & tính chất điện

Converter Type Successive-approximation ADC
Độ phân giải 16 bit
Throughput Rate 200 kSPS
Number of Analog Inputs 1 input
Architecture Factory-calibrated switched-capacitor SAR
Điện áp cung cấp 5 V
Power Dissipation 100 mW maximum
Internal Reference Voltage 2.5 V
Full-Scale Input ±10 V
Maximum Conversion Time 4 µs
Khoảng nhiệt độ hoạt động -40°C to +85°C
Hộp 20-pin PDIP
Package Family PDIP through-hole package

Hướng dẫn cấu hình chân AD977ACNZ pdip through-hole package

Cấu hình chân cho AD977ACNZ (pdip through-hole package gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.

Bảng cấu hình chân pdip through-hole package cho AD977ACNZ

Không có dữ liệu chân cụ thể sẵn có cho AD977ACNZ.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

AD977ACNZ phù hợp cho 6 Áp dụngs: Industrial Process Measurement, Precision Sensor Interface, Laboratory Data Acquisition, Digital Instrumentation, Embedded Control Systems, Portable Measurement Equipment.

🏭

Industrial Process Measurement

The AD977ACNZ fits industrial process-measurement modules that digitize pressure, temperature, level, or process-current signals at moderate speed. Its 16-bit resolution provides 65,536 code levels, while the 200 kSPS rate is ample for many industrial loops and supervisory channels. The single 5 V supply and 100 mW maximum dissipation simplify isolated or compact field-instrument power budgets. Use an appropriate input driver and protection network, and ensure the source impedance satisfies the acquisition requirements in the manufacturer datasheet.

🧩

Precision Sensor Interface

The AD977ACNZ is suitable for low-level sensor acquisition where 16-bit resolution, a 5 V supply, and 200 kSPS throughput are useful. It can digitize the output of suitable current-voltage or voltage-amplification stages in instrumentation systems. The factory-calibrated switched-capacitor SAR architecture supports accurate conversion without requiring a high-power conversion clock. Front-end design should control offset, gain, common-mode range, and noise because ADC resolution alone does not determine end-to-end measurement accuracy.

🔧

Laboratory Data Acquisition

The AD977ACNZ can serve as the conversion element in a laboratory data-acquisition module for multichannel monitoring systems. A 200 kSPS per-converter rate supports general-purpose analog measurements without the power demands of a gigahertz-class ADC. Its 20-pin PDIP package is convenient for instrument prototyping and through-hole assembly. For accurate results, isolate sensitive analog routing, use a low-noise 5 V reference supply, and verify sampling timing and settling behavior with the intended source impedance.

📺

Digital Instrumentation

The AD977ACNZ is appropriate for digital panel meters, bench instruments, and measurement controllers that require more precision than a low-cost 8-bit or 12-bit converter. The 16-bit code width improves resolution across the selected analog input range, while the 200 kSPS rate allows rapid updates of the displayed or recorded value. The single 5 V operation simplifies integration around embedded controllers. Calibration tables should be based on the actual gain and offset measured for the completed analog channel.

⚡

Embedded Control Systems

The AD977ACNZ can digitize control and monitoring signals in an embedded industrial controller when 200 kSPS throughput is sufficient for the control loop. Its low 100 mW maximum dissipation and single-supply architecture are useful where board space, converter count, or thermal load is constrained. Use the internal reference only when its noise and stability satisfy the application, and consider calibration and digital filtering when the target measurement has high source impedance or demanding accuracy requirements.

📱

Portable Measurement Equipment

The AD977ACNZ can support portable measurement equipment that converts moderate-rate analog inputs while maintaining limited power consumption. A single 5 V rail simplifies battery-derived system architecture, and the 20-pin PDIP package is appropriate for rugged prototypes or serviceable instrument boards. At only 200 kSPS, the device is best matched to temperature, pressure, flow, and slow waveform measurements rather than wideband signal capture. The analog front end should include protection appropriate to the connector and operating environment.

What is the AD977ACNZ conversion rate and resolution?
The AD977ACNZ provides 16-bit resolution with a throughput rate of 200 kSPS. Analog Devices describes the AD977A as the 200 kSPS member of the AD977 and AD977A family, while the original AD977 operates at 100 kSPS. The converter uses a successive-approximation, switched-capacitor architecture and includes an internal 2.5 V reference.
What supply voltage does the AD977ACNZ require?
The AD977ACNZ operates from a single 5 V supply. According to the Analog Devices AD977 product information, the device is a low-power converter designed for single-supply operation, with maximum power dissipation of 100 mW. Use the manufacturer application guidance to decouple the supply pins and return analog and digital grounds in the recommended configuration.
What package does the AD977ACNZ use?
The AD977ACNZ is supplied in a 20-pin PDIP package. The verified component listing identifies it as a 20-PDIP analog-to-digital converter, and a separate product listing gives the body dimensions as 7.62 mm by 0.300 inch. The package therefore supports conventional through-hole PCB assembly rather than compact surface-mount assembly.
Where can I download the AD977ACNZ datasheet?
The official AD977ACNZ documentation is available through Analog Devices at https://www.analog.com/en/products/ad977.html. That product page links the AD977 and AD977A family datasheet and technical documentation. Use the manufacturer pin-description table when assigning PCB signals because package-level descriptions can differ between temperature grades and package options.
Where can I find the AD977ACNZ pinout?
The AD977ACNZ pinout must be taken from the Analog Devices AD977 manufacturer datasheet for the exact 20-pin PDIP configuration. Start at the package orientation marker and map each numbered lead to the datasheet pin-description table before laying out the board. Confirm analog input, supply, ground, clock, and digital-output functions against the selected ordering code.
Is the AD977ACNZ suitable for industrial sensor acquisition?
The AD977ACNZ is suitable for industrial sensor acquisition when the signal bandwidth and required accuracy fit a 200 kSPS, 16-bit converter. Its single 5 V supply and 100 mW maximum dissipation simplify low-power measurement modules, while factory calibration supports consistent offset, gain, and linearity performance. Input-referenced and gain-amplifier design remains critical for low-level sensor signals.
What is the best drop-in replacement for the AD977ACNZ?
The closest validated drop-in choice is the Analog Devices AD977AANZ, which appears in direct family-comparison listings and retains the 20-pin PDIP format and 200 kSPS AD977A performance. Exact compatibility of ordering-code suffixes and temperature grades should still be confirmed against the manufacturer datasheet before production release.
Can AD977AANZ replace AD977ACNZ?
AD977AANZ can serve as a strong family-level replacement for AD977ACNZ because both are associated with the 200 kSPS AD977A converter and the 20-pin PDIP format. The ordering-code suffixes still require engineering review because they can identify temperature grade, package material, or qualification differences. Confirm pin functions and environmental requirements against the manufacturer datasheet.
AD977ACNZ vs AD977ACN: which converter should be selected?
AD977ACNZ should be selected when the design requires the 200 kSPS AD977A performance associated with the Z ordering option, while AD977ACN belongs to the 100 kSPS AD977 family. The throughput difference is 100 kSPS, so they are not equivalent choices for acquisition timing. Package suffix and qualification requirements must also be checked before substitution.
When should I choose the AD977ACNZ instead of a cross-brand ADC?
Choose the AD977ACNZ when a 16-bit SAR converter with 200 kSPS throughput, single 5 V operation, and a 20-pin PDIP package matches the existing mechanical and electrical design. A cross-brand device is preferable only after its pinout, input range, reference arrangement, acquisition timing, noise performance, lifecycle status, and qualification have been verified against the system requirements.
Is there a cross-brand drop-in equivalent for the AD977ACNZ?
No cross-brand drop-in equivalent for the AD977ACNZ has been validated from the available manufacturer and component cross-reference information. The package, 16-bit resolution, 200 kSPS rate, input range, reference behavior, and acquisition timing must all match before a different manufacturer can be treated as pin-to-pin compatible. Use the manufacturer family options first when footprint continuity is essential.
What are the key specifications of AD977ACNZ that engineers should know?
The AD977ACNZ is a 16-bit, single-input SAR ADC rated for 200 kSPS throughput, powered from a single 5 V supply. It consumes no more than 100 mW, uses a factory-calibrated switched-capacitor architecture, and includes an internal 2.5 V reference. The device is offered in a 20-pin PDIP package and operates from -40°C to +85°C according to the product information.
How much power does the AD977ACNZ dissipate?
The AD977ACNZ dissipates no more than 100 mW under the manufacturer-specified operating conditions. Its single 5 V architecture also avoids requiring a separate negative analog supply. Actual board-level dissipation depends on conversion activity, clocking, supply voltage, and ambient temperature, so thermal design should use the highest expected operating load rather than a no-conversion idle condition.
Where can I buy the AD977ACNZ online?
Use the Request a Quote form on this page to ask for AD977ACNZ availability, lead time, and an order quote. The exact ordering code, package option, and target quantity should be stated in the request so the manufacturer order can be confirmed without ambiguity. Stock status and production allocation can change, making a direct quote the most reliable purchasing path.
What is the price and lead time of the AD977ACNZ?
The AD977ACNZ should be quoted through the Request a Quote form on this page. Provide the required quantity, date code, packaging preference, and destination so current commercial terms and lead time can be confirmed. Because the converter is an older catalog component with availability varying by ordering code, avoid treating an undated marketplace indication as a production commitment.
Is the AD977ACNZ currently in stock?
Current stock for the AD977ACNZ should be confirmed through the Request a Quote form on this page. Component listings may indicate inventory at different times, while factory allocation and authorized-channel supply can fluctuate. State the quantity and required delivery date in the request, and include the full AD977ACNZ ordering code to avoid a mismatch with another AD977 package or grade.

Dữ liệu tham khảo kỹ thuật cho AD977ACNZ — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the AD977ACNZ when the design requires a 16-bit, single-input SAR ADC with 200 kSPS throughput, a single 5 V supply, and a 20-pin PDIP footprint. It is especially suitable for industrial instrumentation, sensor interfaces, laboratory measurement equipment, and embedded monitoring systems where moderate acquisition speed is sufficient. AD977AANZ is the closest validated family alternative when its ordering suffix, temperature grade, qualification status, and availability meet the production requirements. AD977AAN offers another family ordering option with the same principal conversion specifications, subject to suffix verification. Do not substitute the 100 kSPS AD977ACN when timing depends on the AD977ACNZ's 200 kSPS performance. A cross-brand replacement should be considered only when its complete pinout, input range, reference configuration, acquisition timing, noise, lifecycle status, and environmental qualification have been independently validated.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này AD977AANZ AD977AAN
Brand Analog Devices Analog Devices Analog Devices
Package 20-pin PDIP 20-pin PDIP 20-pin PDIP
Resolution 16 bit 16 bit 16 bit
Throughput Rate 200 kSPS 200 kSPS 200 kSPS
Converter Architecture Successive-approximation switched-capacitor ADC Successive-approximation switched-capacitor ADC Successive-approximation switched-capacitor ADC
Supply Voltage 5 V 5 V 5 V
Maximum Power Dissipation 100 mW 100 mW 100 mW
Internal Reference 2.5 V 2.5 V 2.5 V
Analog Input Count 1 input 1 input 1 input

Bảo phân biệt quan trọng

  • Higher throughput within the AD977A family (vsAD977ACN)
  • Exact package and throughput retention (vsAD977AANZ)
  • Single-supply low-power operation (vsAD977AAN)

Ghi chú thiết kế

Route the analog input directly to the converter and keep it away from clock and digital-output traces. Place the required supply-decoupling capacitors at the associated power pins, with short ground returns. Because the AD977ACNZ uses a 20-pin PDIP package, preserve adequate spacing for through-hole assembly and avoid placing tall or heat-sensitive components around the leads.

Verify the settling time and acquisition behavior for the intended source impedance before selecting the input-driver network. A long or resistive input path can reduce conversion accuracy even when the ADC is operated at 200 kSPS. Use the pin-description and application guidance in the manufacturer datasheet to establish source impedance, input range, reference grounding, and the timing relationship between sampling and conversion.

Design the 5 V rail with low noise because supply variations can affect a 16-bit measurement system even though the converter itself consumes no more than 100 mW. Decouple the supply at the device, preserve a low-impedance return path, and assess the internal 2.5 V reference against the required noise and stability. External calibration or filtering may be necessary when the application demands better end-to-end accuracy.

Do not interchange the AD977ACNZ with the 100 kSPS AD977 solely because both use a 20-pin PDIP package. The AD977ACNZ is associated with the 200 kSPS AD977A performance, while the original AD977 is specified at 100 kSPS. Confirm the exact ordering code, temperature grade, pinout, input range, and acquisition timing against the manufacturer datasheet before approving a substitution.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

Compliance declarations are not specified in the manufacturer product information or the available component listings. Verify RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status for the exact ordering code before release.

Dữ liệu được xác minh vào: 2026-11-19 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

AD977ACNZ datasheet AD977ACNZ datasheet pdf AD977ACNZ pinout AD977ACNZ specifications AD977ACNZ equivalent AD977ACNZ replacement AD977ACNZ cross reference AD977ACNZ price AD977ACNZ stock AD977ACNZ vs AD977ACN Analog Devices AD977ACNZ AD977ACNZ 20-PDIP ADC AD977ACNZ application circuit AD977ACNZ 200 kSPS

Các bộ phận và thuật ngữ liên quan

Analog Devices AD977ACNZ AD977AANZ AD977AAN AD977ACN AD977 AD977A ADC analog-to-digital converter SAR ADC successive approximation switched-capacitor ADC 16-bit resolution 200 kSPS 5 V power supply 2.5 V internal reference 100 mW power dissipation 20-pin PDIP PDIP through-hole package industrial instrumentation sensor interface data acquisition factory calibration
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ