Analog Devices

AD9850BRS - 10-Bit 125 MHz DDS Synthesizer | Analog Devices

MPN: AD9850BRS ✓ Active
28-SSOP, 0.209 in (5.30 mm) width Package 125 MHz Speed
MOQ: 1 |

AD9850BRS Overview

The Analog Devices AD9850BRS is a complete direct digital synthesis IC that combines a digitally programmable frequency synthesizer, a 10-bit high-speed DAC, and a comparator in a 28-lead SSOP package. It supports a maximum system clock of 125 MHz, provides 32-bit frequency tuning, and accepts serial or parallel programming of the phase and frequency control words. The AD9850BRS also includes an internal high-speed, high-performance DAC and comparator, allowing it to generate a spectrally pure analog output when referenced to an accurate clock source.

A direct digital synthesizer, or DDS, is a frequency-generation architecture that uses a phase accumulator and a numerically controlled waveform lookup followed by a DAC. Unlike a conventional integer-N or fractional-N frequency synthesizer, a DDS derives its output frequency directly from a frequency tuning word. The AD9850BRS therefore belongs to the oscillator and clock-generator hierarchy and can replace combinations of divider chains, digital counters, DACs, and comparators in precision signal-source designs.

The primary device characteristics include a 10-bit DAC resolution, 125 MHz maximum clock rate, and 32-bit frequency tuning word. These parameters define the device as a compact single-chip DDS solution rather than a general-purpose logic IC. Because the DAC is 10 bits, spectral performance depends strongly on output filtering and on the quality of the reference clock. The comparator output supports use as a square-wave reference, while the analog DAC output provides a sinusoid at the programmed frequency.

The AD9850 generates its output from a stable reference clock and a digitally loaded frequency and phase word. Increasing the phase-word resolution supports finer frequency control, while phase adjustment permits precise placement of the generated signal relative to other clocks. The internal comparator can sharpen the analog waveform into a digital-compatible clock output, which is useful when downstream circuitry requires cleaner edges than the raw DAC waveform provides.

Typical uses include variable-frequency oscillators, sine-wave generators, clock and trigger sources, amplitude or frequency-modulation experiments, local-oscillator subsystems, automatic test equipment, and embedded signal-processing fixtures. The 28-lead SSOP package is also suitable for laboratory instruments and communication equipment where a programmable clock with an adjustable phase relationship is required.

When designing a board around the AD9850BRS, provide a low-jitter reference clock, route the DAC output through an appropriate reconstruction filter, and use the comparator output when a digital clock is required. The 10-bit DAC quantization produces harmonics and spurs that a low-pass filter must suppress, and reference-clock jitter translates directly into output phase noise.

This page combines the manufacturer device description, distributor package and availability details, package dimensions, pricing references, and application-oriented engineering guidance. It also identifies a same-family 28-lead SSOP option and explains the interface, filtering, and layout considerations that determine whether the AD9850BRS is suitable for a given precision signal-source design.

Drop-in alternatives for AD9850BRS — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with AD9850BRS (same form factor and footprint) — differing in Device Type, Package, Programming Interface.

Analog Devices
Device Type: Direct Digital Synthesis IC with internal DAC and comparator
Package: 28-lead SSOP
Programming Interface: 10-bit parallel or serial
Compare with AD9850BRS →

AD9851BRS

✅ Drop-In
Analog Devices
📦 SSOP-28
Direct Digital Synthesis IC with internal DAC and comparator · 180 MHz · 10 bit · 32 bit · >3.0 V · -40°C to +85°C

Contact for price

View Datasheet →

AD9850BRS Specifications

Device Type Direct Digital Synthesis (DDS) IC
Architecture DDS synthesizer with internal DAC and comparator
Maximum System Clock 125 MHz
Frequency Tuning Word 32 bit
DAC Resolution 10 bit
Integrated DAC Count 1 DAC
Programming Interface Serial or parallel
Package 28-SSOP, 0.209 in (5.30 mm) width
Package Pin Count 28 pins
Mounting Type Surface mount
Analog Output Programmable sine-wave output from the internal DAC
Digital Output Comparator clock output
Shipping Format Tube

AD9850BRS 28 pins Pin Configuration Guide

Pin configuration for AD9850BRS (28 pins package). Pin numbering, functions, and connection diagrams are defined in the manufacturer datasheet. Refer to it for the exact footprint and soldering guidelines.

28 pins package pinout diagram for AD9850BRS

No detailed pinout data available for AD9850BRS.

Refer to the datasheet for full pin configuration.

Typical Applications

AD9850BRS is suitable for 6 applications: Programmable Sine-Wave Generator, Precision Clock and Trigger Source, Communications Local Oscillator, Frequency and Phase Modulation Experiment, Industrial Signal Generator, Automated Test Equipment Clocking.

🌐

Programmable Sine-Wave Generator

The AD9850BRS fits a laboratory sine-wave source because its 32-bit frequency tuning word provides fine frequency resolution and its 10-bit DAC produces an analog waveform that can be filtered. A microcontroller or PC interface loads the tuning and phase words through the serial or parallel port. The 125 MHz system clock supports dense frequency steps, while the internal comparator provides a square-wave reference at the same programmed frequency. Use a reconstruction filter after the DAC output to suppress 10-bit quantization harmonics and images.

🖥️

Precision Clock and Trigger Source

The AD9850BRS can serve as a programmable clock source in automated test equipment because the same DDS output can be phase-adjusted relative to other system clocks. The comparator converts the generated waveform into a square-wave clock with defined edges, while the DAC path supports an adjustable sine-wave reference. A stable reference oscillator and a 32-bit frequency word provide the basis for accurate output-frequency selection. Firmware should support both coarse frequency changes and fine phase corrections.

📡

Communications Local Oscillator

Within a communications test fixture or signal-generation system, the AD9850BRS provides digitally controlled frequency and phase for local-oscillator emulation. Its 125 MHz maximum system clock and 32-bit tuning word allow fine adjustment around a carrier, while the internal 10-bit DAC supplies the analog output and the comparator supplies a digital reference. Place a low-pass filter after the DAC and isolate the reference input from noisy switching nodes to avoid degraded phase noise.

🔧

Frequency and Phase Modulation Experiment

The AD9850BRS is appropriate for laboratory modulation experiments because the frequency and phase control words can be changed by a host controller while the device remains referenced to a stable clock. A dedicated DDS controller can update the tuning word for frequency sweeps or step the phase word for controlled time shifts. The comparator output provides a coherent digital reference, and the filtered DAC output provides the analog measurement signal. Use deterministic update timing when phase continuity between words is important.

🏭

Industrial Signal Generator

The AD9850BRS can form the core of an industrial signal generator where a compact programmable output is required without a separate DAC and comparator. The 28-lead SSOP package supports mixed-signal board construction, and the serial interface reduces the connection count when long word updates are not required. Derive the output from a low-jitter reference clock and add output attenuation as required by the load. Validate the reconstructed waveform amplitude and harmonic performance against the specified application bandwidth.

🖥️

Automated Test Equipment Clocking

The AD9850BRS is useful in automated test equipment for generating clocks with selectable frequencies and repeatable phase relationships. A host processor writes the tuning and phase words, while the comparator output drives digital timing circuits and the filtered DAC output drives analog stimulus paths. The 125 MHz system clock permits high-resolution tuning relative to the chosen reference. For multi-instrument synchronization, align the reference distribution and account for deterministic board and cable delays.

Recommended Products Summary

AD9850 Base DDS device family Used in: Programmable Sine-Wave Generator, Precision Clock and Trigger Source, Communications Local Oscillator, Frequency and Phase Modulation Experiment, Industrial Signal Generator, Automated Test Equipment Clocking AD9851BRS Analog Devices Used in: Programmable Sine-Wave Generator, Precision Clock and Trigger Source, Communications Local Oscillator, Frequency and Phase Modulation Experiment, Industrial Signal Generator, Automated Test Equipment Clocking
What is the AD9850BRS and what does it do?
The AD9850BRS is a complete direct digital synthesis IC that combines a digitally programmable frequency synthesizer, a 10-bit high-speed DAC, and a comparator. According to the Analog Devices AD9850 datasheet, it generates a spectrally pure, frequency- and phase-programmable analog output when driven by an accurate reference clock. Its maximum system clock is 125 MHz, and the frequency tuning word is 32 bits. The package is a 28-lead SSOP.
What are the key specifications of AD9850BRS that engineers should know?
The key AD9850BRS specifications are a 125 MHz maximum system clock, a 32-bit frequency tuning word, a 10-bit DAC, and a 28-lead SSOP package. Analog Devices describes the device as integrating DDS technology with a high-speed DAC and comparator. These characteristics make it suitable for sine-wave generation, programmable clocking, phase adjustment, and communications test equipment. The comparator output can supply a digital clock, while the DAC output requires external filtering for a clean sinusoidal waveform.
How is the output frequency of the AD9850BRS programmed?
The AD9850BRS output frequency is programmed with a 32-bit frequency tuning word that is loaded into the internal phase accumulator through a serial or parallel interface. The Analog Devices AD9850 datasheet identifies both programming paths, allowing the interface to match the host system and update rate. The actual frequency relationship also depends on the reference clock presented to the device. Use the ADI DDS design tools or the device equations in the datasheet when calculating the required tuning word.
Where can I download the AD9850BRS datasheet PDF?
The official AD9850BRS datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/AD9850.pdf. It contains the general description, architecture, timing information, pin descriptions, operating limits, and application information for the AD9850 family. Analog Devices also maintains the product page at https://www.analog.com/en/products/AD9850.html, where ADIsimDDS tools and IBIS model information are listed.
Where can I find the AD9850BRS pinout and package details?
The AD9850BRS pinout and mechanical drawing are shown in the pin-description and package sections of the Analog Devices AD9850 datasheet. The device is supplied in a 28-lead SSOP package measuring 0.209 inches, or 5.30 mm, in body width. Before assigning PCB tracks, use the pin-description table in the manufacturer datasheet to confirm signal assignments, supply pins, ground connections, and the comparator and DAC outputs.
Do I need an external filter with the AD9850BRS DAC output?
Yes, an external reconstruction or low-pass filter is normally required for a clean sinusoid at the AD9850BRS DAC output. The internal converter has 10-bit resolution, so quantization steps create harmonics and spurious components that are not removed by the DDS architecture itself. The filter cutoff should pass the desired output frequency while attenuating image and harmonic components. Analog Devices provides ADIsimDDS for evaluating spectral performance and filter behavior.
How do I minimize phase noise in an AD9850BRS clock generator?
Phase noise is minimized by using a low-jitter reference clock, keeping the reference input traces short, and providing clean supply and ground connections. Reference-clock jitter maps directly into phase noise at the synthesized output, while supply and ground noise can disturb the internal phase accumulator and DAC. Place bypass capacitors close to the supply pins and route the reference clock away from the analog output. The exact layout values should follow the guidance in the AD9850 datasheet.
What is the difference between AD9850BRS and AD9851BRS?
The AD9851BRS is a higher-performance same-family DDS option offered in a 28-lead SSOP, while the AD9850BRS uses a 10-bit DAC and has a 125 MHz maximum system clock. The AD9851 family increases the converter and system-clock performance relative to the AD9850. Both devices share the same manufacturer and package family, but firmware and control-word settings must be confirmed against the AD9851 datasheet before treating the two as interchangeable.
When should I choose the AD9850BRS instead of the AD9851BRS?
Choose the AD9850BRS when a 10-bit DAC and 125 MHz maximum system clock are sufficient for the required spectral purity and tuning resolution. Choose the AD9851BRS when the higher-performance family characteristics of that device are needed while retaining a 28-lead SSOP implementation. The decision should be based on required phase noise, spurious performance, update rate, and interface timing rather than package similarity alone.
Is the AD9850BRS suitable for a programmable sine-wave generator?
The AD9850BRS is well suited to a programmable sine-wave generator because it integrates a 32-bit frequency tuning word, a 10-bit DAC, and a comparator in one package. Changing the frequency word changes the DAC output frequency, while the phase word controls signal alignment. Use the comparator output for a square-wave reference and filter the DAC output for a sinusoidal waveform. The 125 MHz system-clock capability supports high-resolution frequency settings relative to the selected reference clock.
What can replace the AD9850BRS?
The AD9851BRS is the closest identified same-family replacement candidate because it uses a 28-lead SSOP and retains the DDS, DAC, and comparator architecture. It is not an automatic functional substitute: its converter resolution, maximum system clock, and performance characteristics differ, so the control interface and signal quality must be revalidated. Also confirm that the original board layout and firmware match the AD9851 datasheet before treating it as a drop-in replacement.
What is the best Analog Devices alternative for AD9850BRS?
The AD9851BRS is the best-identified Analog Devices alternative for an AD9850BRS design that must retain the 28-lead SSOP format. It uses the same broader DDS product family but provides different resolution, clock-rate, and spectral-performance characteristics, so software and hardware validation are required. Other ADI DDS products may offer better performance, but those devices can use different packages and pin assignments, which prevents them from being treated as direct replacements.
Where can I buy AD9850BRS online?
Use the Request a Quote form on this page to request AD9850BRS availability, current lead time, and a formal quotation. The exact ordering code AD9850BRS identifies the 28-SSOP device in tube format, while AD9850BRS-REEL denotes a separate reel-packed ordering code that is listed as obsolete. Confirm the required shipping format and any applicable traceability requirements when submitting the request.
What is the price of AD9850BRS?
Current AD9850BRS commercial pricing is presented through the Request a Quote form on this page, where the quantity, shipping format, and required delivery terms can be entered. Pricing for this legacy DDS device can vary substantially with order quantity, traceability requirements, and market availability. Use the quote form rather than a historical distributor figure so the returned quotation reflects current inventory and order handling.
Is AD9850BRS in stock and what is its lead time?
Current AD9850BRS stock status and lead time should be requested through the Request a Quote form on this page. The 28-SSOP device is supplied in tube format, and a separate reel-packed ordering code is listed as obsolete, so the exact suffix matters when confirming supply. Include your required quantity, date code, and target delivery date in the request to obtain an actionable availability response.

Engineering reference data for AD9850BRS — comparison, design guidance, and compliance information.

Selection Guide

Choose the AD9850BRS for compact sine-wave generation, programmable clocking, phase-aligned test signals, and laboratory signal sources where a 10-bit DAC and 125 MHz maximum system clock provide adequate performance. Its integrated DAC and comparator reduce external circuitry, and the 32-bit tuning word supports precise frequency selection. Consider the AD9851BRS when higher DDS performance is required and you are prepared to revalidate its interface, control words, and spectral characteristics. Both identified options use the 28-lead SSOP format, but the package match alone does not guarantee functional interchangeability. For new designs, prioritize reference-clock jitter, reconstruction-filter design, output loading, and deterministic word-update timing before finalizing the component.

Comparison with Alternatives

Parameter This Product AD9851BRS
Brand Analog Devices Analog Devices
Package SSOP-28 SSOP-28 - same package
Device Category Direct Digital Synthesis IC Direct Digital Synthesis IC
Integrated Functions DDS synthesizer, 10-bit DAC, comparator DDS synthesizer, DAC, comparator
Analog Output Programmable DAC sine-wave output Programmable DAC output
Digital Output Comparator clock output Comparator clock output

Key Differentiators

  • Complete DDS signal path in one package (vs AD9851BRS)
  • Fine digital frequency control (vs AD9851BRS)
  • Flexible programming and dual output paths (vs AD9851BRS)

Design Notes

The AD9850BRS reference clock is the primary determinant of output phase noise, so use a low-jitter reference and keep its route short and away from the DAC output. Place bypass capacitors at the supply and ground pins, provide a quiet ground return for the analog section, and avoid routing the reference trace beside the high-speed comparator output. Validate phase noise and spurious levels with the intended reference source because a clean digital clock alone does not guarantee a spectrally pure analog output.

Treat the DAC output and comparator output as separate high-speed paths. Route the analog output away from digital control and clock traces, and place the reconstruction filter close enough to minimize pickup of board noise. The comparator output can develop fast edges, so keep its trace away from the reference and analog pins unless a controlled ground-plane transition is required. Grounding and decoupling arrangements should follow the reference layout and pin descriptions in the AD9850 datasheet.

Do not treat the 10-bit DAC as a distortion-free sine source. Quantization steps generate harmonics, and DDS image components appear above the desired output frequency, so an external reconstruction filter is normally required. Also avoid assuming that a 32-bit tuning word directly implies a 32-bit output resolution; the DAC remains 10 bits. Confirm frequency-word scaling, phase-word behavior, reference-clock ratio, and control timing in the manufacturer datasheet before bringing up a new board.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The manufacturer product page and datasheet identify the AD9850 device, but the retrieved listings do not provide a complete compliance declaration for the exact AD9850BRS ordering code.

Data verified on: 2026-11-15 — data verified and curated by XAIPART's component engineering team

Related Searches

AD9850BRS AD9850BRS datasheet AD9850BRS datasheet pdf AD9850BRS pinout AD9850BRS specifications AD9850BRS SSOP-28 Analog Devices AD9850BRS AD9850BRS equivalent AD9850BRS replacement AD9850BRS vs AD9851BRS AD9850BRS application circuit AD9850 125 MHz DDS synthesizer AD9850BRS price AD9850BRS stock

Related Components & Terms

Analog Devices AD9850BRS AD9850 AD9851BRS direct digital synthesis DDS direct digital synthesizer frequency synthesizer clock generator phase accumulator frequency tuning word phase word 10-bit DAC high-speed DAC comparator 125 MHz system clock 32-bit frequency tuning word serial programming interface parallel programming interface reconstruction filter SSOP-28 surface mount phase noise reference clock jitter spectrum analyzer
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details