AD9850BRS - 10-Bit 125 MHz DDS Synthesizer | Analog Devices
MPN: AD9850BRS ✓ فعالAD9850BRS جائزہ
A direct digital synthesizer, or DDS, is a frequency-generation architecture that uses a phase accumulator and a numerically controlled waveform lookup followed by a DAC. Unlike a conventional integer-N or fractional-N frequency synthesizer, a DDS derives its output frequency directly from a frequency tuning word. The AD9850BRS therefore belongs to the oscillator and clock-generator hierarchy and can replace combinations of divider chains, digital counters, DACs, and comparators in precision signal-source designs.
The primary device characteristics include a 10-bit DAC resolution, 125 MHz maximum clock rate, and 32-bit frequency tuning word. These parameters define the device as a compact single-chip DDS solution rather than a general-purpose logic IC. Because the DAC is 10 bits, spectral performance depends strongly on output filtering and on the quality of the reference clock. The comparator output supports use as a square-wave reference, while the analog DAC output provides a sinusoid at the programmed frequency.
The AD9850 generates its output from a stable reference clock and a digitally loaded frequency and phase word. Increasing the phase-word resolution supports finer frequency control, while phase adjustment permits precise placement of the generated signal relative to other clocks. The internal comparator can sharpen the analog waveform into a digital-compatible clock output, which is useful when downstream circuitry requires cleaner edges than the raw DAC waveform provides.
Typical uses include variable-frequency oscillators, sine-wave generators, clock and trigger sources, amplitude or frequency-modulation experiments, local-oscillator subsystems, automatic test equipment, and embedded signal-processing fixtures. The 28-lead SSOP package is also suitable for laboratory instruments and communication equipment where a programmable clock with an adjustable phase relationship is required.
When designing a board around the AD9850BRS, provide a low-jitter reference clock, route the DAC output through an appropriate reconstruction filter, and use the comparator output when a digital clock is required. The 10-bit DAC quantization produces harmonics and spurs that a low-pass filter must suppress, and reference-clock jitter translates directly into output phase noise.
This page combines the manufacturer device description, distributor package and availability details, package dimensions, pricing references, and application-oriented engineering guidance. It also identifies a same-family 28-lead SSOP option and explains the interface, filtering, and layout considerations that determine whether the AD9850BRS is suitable for a given precision signal-source design.
کے لیے ڈراپ اِن متبادل AD9850BRS — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں AD9850BRS (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Device Type, Package, Programming Interface.
AD9851BRS
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →AD9850BRS تفصیلات
| Device Type | Direct Digital Synthesis (DDS) IC |
| Architecture | DDS synthesizer with internal DAC and comparator |
| Maximum System Clock | 125 MHz |
| Frequency Tuning Word | 32 bit |
| DAC Resolution | 10 bit |
| Integrated DAC Count | 1 DAC |
| Programming Interface | Serial or parallel |
| پیکیج | 28-SSOP, 0.209 in (5.30 mm) width |
| Package Pin Count | 28 pins |
| ماؤنٹنگ ٹائپ | Surface mount |
| Analog Output | Programmable sine-wave output from the internal DAC |
| Digital Output | Comparator clock output |
| Shipping Format | Tube |
AD9850BRS 28 pins پن کنفیگریشن گائیڈ
AD9850BRS (28 pins پیکیج) کے لیے پن کنفیگریشن۔ پن نمبرنگ، فنکشنز اور کنکشن ڈایاگرامز مینوفیکچرر کے ڈیٹا شیٹ میں بیان کیے گئے ہیں۔ درست فٹ پرنٹ اور سولڈرنگ رہنما ہدایات کے لیے اسی سے رجوع کریں۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں AD9850BRS.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
AD9850BRS کے لیے موزوں ہے 6 ایپلیکیشنs: Programmable Sine-Wave Generator, Precision Clock and Trigger Source, Communications Local Oscillator, Frequency and Phase Modulation Experiment, Industrial Signal Generator, Automated Test Equipment Clocking.
Programmable Sine-Wave Generator
The AD9850BRS fits a laboratory sine-wave source because its 32-bit frequency tuning word provides fine frequency resolution and its 10-bit DAC produces an analog waveform that can be filtered. A microcontroller or PC interface loads the tuning and phase words through the serial or parallel port. The 125 MHz system clock supports dense frequency steps, while the internal comparator provides a square-wave reference at the same programmed frequency. Use a reconstruction filter after the DAC output to suppress 10-bit quantization harmonics and images.
تجویز کردہ
Precision Clock and Trigger Source
The AD9850BRS can serve as a programmable clock source in automated test equipment because the same DDS output can be phase-adjusted relative to other system clocks. The comparator converts the generated waveform into a square-wave clock with defined edges, while the DAC path supports an adjustable sine-wave reference. A stable reference oscillator and a 32-bit frequency word provide the basis for accurate output-frequency selection. Firmware should support both coarse frequency changes and fine phase corrections.
تجویز کردہ
Communications Local Oscillator
Within a communications test fixture or signal-generation system, the AD9850BRS provides digitally controlled frequency and phase for local-oscillator emulation. Its 125 MHz maximum system clock and 32-bit tuning word allow fine adjustment around a carrier, while the internal 10-bit DAC supplies the analog output and the comparator supplies a digital reference. Place a low-pass filter after the DAC and isolate the reference input from noisy switching nodes to avoid degraded phase noise.
تجویز کردہ
Frequency and Phase Modulation Experiment
The AD9850BRS is appropriate for laboratory modulation experiments because the frequency and phase control words can be changed by a host controller while the device remains referenced to a stable clock. A dedicated DDS controller can update the tuning word for frequency sweeps or step the phase word for controlled time shifts. The comparator output provides a coherent digital reference, and the filtered DAC output provides the analog measurement signal. Use deterministic update timing when phase continuity between words is important.
تجویز کردہ
Industrial Signal Generator
The AD9850BRS can form the core of an industrial signal generator where a compact programmable output is required without a separate DAC and comparator. The 28-lead SSOP package supports mixed-signal board construction, and the serial interface reduces the connection count when long word updates are not required. Derive the output from a low-jitter reference clock and add output attenuation as required by the load. Validate the reconstructed waveform amplitude and harmonic performance against the specified application bandwidth.
تجویز کردہ
Automated Test Equipment Clocking
The AD9850BRS is useful in automated test equipment for generating clocks with selectable frequencies and repeatable phase relationships. A host processor writes the tuning and phase words, while the comparator output drives digital timing circuits and the filtered DAC output drives analog stimulus paths. The 125 MHz system clock permits high-resolution tuning relative to the chosen reference. For multi-instrument synchronization, align the reference distribution and account for deterministic board and cable delays.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا AD9850BRS — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | AD9851BRS |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Package | SSOP-28 | SSOP-28 - same package |
| Device Category | Direct Digital Synthesis IC | Direct Digital Synthesis IC |
| Integrated Functions | DDS synthesizer, 10-bit DAC, comparator | DDS synthesizer, DAC, comparator |
| Analog Output | Programmable DAC sine-wave output | Programmable DAC output |
| Digital Output | Comparator clock output | Comparator clock output |
اہم امتیازی خصوصیات
- Complete DDS signal path in one package (بمقابلہAD9851BRS)
- Fine digital frequency control (بمقابلہAD9851BRS)
- Flexible programming and dual output paths (بمقابلہAD9851BRS)
ڈیزائن نوٹس
The AD9850BRS reference clock is the primary determinant of output phase noise, so use a low-jitter reference and keep its route short and away from the DAC output. Place bypass capacitors at the supply and ground pins, provide a quiet ground return for the analog section, and avoid routing the reference trace beside the high-speed comparator output. Validate phase noise and spurious levels with the intended reference source because a clean digital clock alone does not guarantee a spectrally pure analog output.
Treat the DAC output and comparator output as separate high-speed paths. Route the analog output away from digital control and clock traces, and place the reconstruction filter close enough to minimize pickup of board noise. The comparator output can develop fast edges, so keep its trace away from the reference and analog pins unless a controlled ground-plane transition is required. Grounding and decoupling arrangements should follow the reference layout and pin descriptions in the AD9850 datasheet.
Do not treat the 10-bit DAC as a distortion-free sine source. Quantization steps generate harmonics, and DDS image components appear above the desired output frequency, so an external reconstruction filter is normally required. Also avoid assuming that a 32-bit tuning word directly implies a 32-bit output resolution; the DAC remains 10 bits. Confirm frequency-word scaling, phase-word behavior, reference-clock ratio, and control timing in the manufacturer datasheet before bringing up a new board.
تعمیل کی معلومات
The manufacturer product page and datasheet identify the AD9850 device, but the retrieved listings do not provide a complete compliance declaration for the exact AD9850BRS ordering code.