ADF4117BRUZ-RL - 1.2 GHz RF PLL Synthesizer | Analog Devices
MPN: ADF4117BRUZ-RL ✓ ActiveADF4117BRUZ-RL Overview
A frequency synthesizer is a clock-and-timing semiconductor that locks an output oscillator to a stable reference frequency. Within the broader product hierarchy, the ADF4117 is an RF PLL frequency synthesizer, part of the clock and timing IC category, and ultimately a semiconductor used for frequency generation and phase-locked-loop control. Its programmable integer-N division architecture allows a single reference oscillator to generate many output frequencies while the dual-modulus prescaler supports fractional-N operating modes through counter programming.
Key features include a maximum synthesized output of 1.2 GHz, support for separate charge-pump and signal-supply voltages, and programmable A and B counters. The low-noise digital phase-frequency detector and precision charge pump form the feedback loop that compares the divided output with the reference path. A programmable reference divider supports flexible reference-frequency division, while the serial interface permits register configuration of the synthesizer and prescaler.
The dual-modulus prescaler provides selectable division ratios of P or P+1. Combined with the programmable A and B counters, this architecture allows the loop divider to be adjusted without changing the external reference oscillator. A separate VP connection supports an extended tuning-voltage range when the charge-pump supply and VCO tuning requirements differ. This makes the device suitable for RF systems requiring predictable lock behavior, flexible channel spacing, and a compact implementation.
Typical uses include wireless receiver and transmitter local oscillators, up-conversion and down-conversion mixers, RF test equipment, and frequency-generation modules. The 1.2 GHz maximum output covers common RF and microwave-adjacent signal chains while the integer-N architecture simplifies channel planning. Designers must account for reference noise, loop bandwidth, charge-pump current, VCO tuning sensitivity, and unwanted reference multiplication when evaluating phase-noise performance.
PCB implementation requires a compact 16-lead TSSOP footprint, a stable reference source, correctly configured decoupling, and an RF-sensitive layout. Keep the reference and VCO paths short, preserve continuous ground references, and place the loop-filter components close to the synthesizer. Compare the calculated loop bandwidth with the VCO phase-noise profile so that the PLL does not add excessive close-in noise or excessive acquisition time.
This page combines device-family architecture, package information, practical RF layout guidance, structured comparisons, and sourcing information to support faster component selection. It also distinguishes the exact ADF4117BRUZ-RL order code from related family members and documents which technical details require confirmation from the manufacturer datasheet before a new PCB is released.
Drop-in alternatives for ADF4117BRUZ-RL — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with ADF4117BRUZ-RL (same form factor and footprint) — differing in Package, Product Type, Charge Pump, A Counter, B Counter.
ADF4117BRUZ-RL7
✅ Drop-InContact for price
View Datasheet →ADF4117BRUZ-RL1
✅ Drop-In📋 Reference alternative (not in catalog)
ADF4117BRUZ
✅ Drop-InContact for price
View Datasheet →ADF4117BRUZ-RL Specifications
| Product Type | RF PLL frequency synthesizer |
| Maximum Synthesized Output Frequency | 1.2 GHz |
| Number of PLL Channels | 1 channel |
| Prescaler | Dual-modulus P/P+1 |
| A Counter | 5-bit programmable |
| B Counter | 5-bit programmable |
| Reference Divider | Programmable |
| Phase-Frequency Detector | Low-noise digital PFD |
| Charge Pump | Precision programmable charge pump |
| Charge-Pump Supply | Up to 5.5 V |
| Signal Supply Voltage | 3 V systems |
| Tuning Voltage | Separate VP connection for extended tuning voltage |
| Extended Temperature Grade | Up to +125 °C |
| Package | 16-pin TSSOP, 4.40 mm width |
| Mounting Type | Surface mount |
ADF4117BRUZ-RL Pin Configuration
| Pin 1 | COM — Charge pump and charge-pump supply ground connection |
| Pin 2 | VPD — Charge-pump supply voltage |
| Pin 3 | VDD — Power supply voltage |
| Pin 4 | DATA — Serial data input |
| Pin 5 | CLK — Serial clock input |
| Pin 6 | LE — Latch enable for serial programming |
| Pin 7 | CE — Chip enable |
| Pin 8 | VCO OUT — Voltage-controlled oscillator output |
| Pin 9 | VCO IN — Voltage-controlled oscillator input |
| Pin 10 | REFIN — Reference input |
| Pin 11 | RIN — Reference input complement |
| Pin 12 | VP — Extended VCO tuning-voltage supply |
| Pin 13 | NC — Not connected |
| Pin 14 | NC — Not connected |
| Pin 15 | NC — Not connected |
| Pin 16 | GND — Ground |
Typical Applications
ADF4117BRUZ-RL is suitable for 6 applications: Wireless Receiver Local Oscillator, Wireless Transmitter Up-Conversion, Receiver Down-Conversion, RF Test and Measurement, Frequency Generation Module, RF Communication Subsystems.
Wireless Receiver Local Oscillator
The ADF4117BRUZ-RL is suitable for a wireless receiver local oscillator because it synthesizes output frequencies up to 1.2 GHz from a stable reference. Its programmable reference divider, 5-bit A counter, 5-bit B counter, and dual-modulus P/P+1 prescaler provide flexible division ratios for channel planning. The 16-lead TSSOP package also supports compact RF front ends. The principal design consideration is loop-filter selection: the charge-pump current and filter must provide adequate lock performance without degrading close-in phase noise or extending acquisition time.
Recommended
Wireless Transmitter Up-Conversion
For wireless transmitter up-conversion, the ADF4117BRUZ-RL generates a programmable local-oscillator signal for a mixer that moves information toward the transmit band. Its maximum 1.2 GHz output and programmable counter architecture allow channel frequencies to be selected without changing the reference source. The low-noise digital phase-frequency detector and precision charge pump support loop designs aimed at low phase noise, while separate VP support gives designers more control over VCO tuning voltage. RF layout, isolation, and reference-routing quality remain critical to transmitter performance.
Recommended
Receiver Down-Conversion
The ADF4117BRUZ-RL can serve the down-conversion stage of a wireless receiver by producing the local oscillator used to translate a received RF signal toward a lower-frequency processing band. Its 1.2 GHz ceiling covers a broad range of receiver frequencies, and the programmable reference divider and dual-modulus prescaler support multiple channel ratios. Designers should calculate the integer-N ratio for every required channel, set the loop bandwidth from the reference and VCO phase-noise requirements, and validate lock performance across temperature and supply tolerance.
Recommended
RF Test and Measurement
The ADF4117BRUZ-RL can provide a programmable local oscillator in RF test equipment where multiple frequencies must be generated with repeatable phase relationships. Its programmable A and B counters, reference divider, and prescaler support a flexible divider arrangement around a fixed reference source. The low-noise detector and precision charge pump make it useful when phase-noise behavior must be considered rather than frequency alone. The implementation still depends on a low-phase-noise reference, a suitable VCO, and a loop filter designed for the required settling time.
Recommended
Frequency Generation Module
ADF4117BRUZ-RL fits a compact programmable frequency-generation module that derives an RF output from a single reference oscillator. The 16-lead TSSOP package limits board area, while the serial programming path allows the divider registers and prescaler to be changed under firmware control. A practical module should preserve isolation between the reference, VCO, charge pump, and digital interface. Supply filtering, ground-plane continuity, and thermal management also matter because reference-noise multiplication and high-speed RF currents can degrade output quality.
Recommended
RF Communication Subsystems
The ADF4117BRUZ-RL is applicable to RF communication subsystems that require a local oscillator derived from a shared reference. Its single-channel architecture, programmable division network, and output capability up to 1.2 GHz make it suitable for frequency-agile RF front ends. Integrating the device requires careful separation of the sensitive reference path from digital and switching circuitry. Engineers should also confirm lock-range margins against VCO tuning-voltage limits and use the manufacturer’s pin and electrical tables when assigning rails and decoupling.
Recommended
Recommended Products Summary
Engineering reference data for ADF4117BRUZ-RL — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | ADF4117BRUZ-RL7 | ADF4117BRUZ-RL1 | ADF4117BRUZ |
|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 16-pin TSSOP | 16-pin TSSOP | 16-pin TSSOP | 16-pin TSSOP |
| Product Type | RF PLL frequency synthesizer | RF PLL frequency synthesizer | RF PLL frequency synthesizer | RF PLL frequency synthesizer |
| Maximum Output Frequency | 1.2 GHz | 1.2 GHz | 1.2 GHz | 1.2 GHz |
| Number of Channels | 1 | 1 | 1 | 1 |
| Prescaler | Dual-modulus P/P+1 | Dual-modulus P/P+1 | Dual-modulus P/P+1 | Dual-modulus P/P+1 |
| Programming Interface | Serial DATA, CLK, LE, and CE | Serial DATA, CLK, LE, and CE | Serial DATA, CLK, LE, and CE | Serial DATA, CLK, LE, and CE |
| Order-Code Difference | BRUZ-RL | BRUZ-RL7 suffix differs | BRUZ-RL1 suffix differs | Base BRUZ order code |
Key Differentiators
- Directly preserves the target 1.2 GHz frequency ceiling (vs ADF4117BRUZ-RL7)
- Maintains the ADF4117 counter and prescaler architecture (vs ADF4117BRUZ-RL1)
- Allows reuse of an established 16-pin TSSOP board layout (vs ADF4117BRUZ)
Design Notes
Route the reference input away from the VCO output, charge-pump traces, serial programming signals, and switching-regulator paths. Use a continuous ground plane, short RF traces, and via fences where the layout rules permit them. Place the reference input and loop-filter networks close to their associated pins to reduce susceptibility to coupling and phase shifts that can move lock range or alter loop dynamics.
Do not select an ADF4117 order code solely from its headline frequency. Confirm the exact suffix, temperature grade, package, reel configuration, and operating limits. Also verify that the required integer-N ratio is valid for the selected P/P+1 prescaler. An invalid divider combination can appear as incorrect output frequency, failure to lock, or operation outside the intended VCO tuning range even when the device and package are otherwise correct.
Decouple the VDD and VPD supplies locally and follow the manufacturer’s recommended capacitor network. VPD sets charge-pump operating conditions, while VP supports the VCO tuning-voltage range; these rails should not be assumed to be interchangeable. Check startup sequencing and rail tolerances against the datasheet, especially if CE is used to control power-up. Stable rails and a clean reference improve repeatability during lock and channel changes.
Design the loop filter from the target reference frequency, desired loop bandwidth, VCO gain, charge-pump current, prescaler, and expected phase noise. A narrower loop can improve close-in phase noise but increase lock time; a wider loop can settle faster but multiply reference noise more strongly. Simulate both lock range and settling behavior before tuning component values, and preserve the selected RF layout during any board revision.
Compliance Information
No explicit RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive-qualification statement was identified for the exact order code. The ADF4117 is an industrial RF timing IC, not an AEC-Q100-qualified automotive device unless a specifically qualified order code is selected.