Analog Devices

ADF4212LBRUZ-RL - 2.4GHz Dual PLL Synthesizer | Analog Devices

MPN: ADF4212LBRUZ-RL ✓ Active
2.7 V to 5.5 V Vdss Programmable Id 20-pin TSSOP, 0.173 in (4.40 mm) width Package 2.4 GHz Speed
MOQ: 1 |

ADF4212LBRUZ-RL Overview

The Analog Devices ADF4212LBRUZ-RL is a low-power dual frequency synthesizer with an RF input bandwidth of 2.4 GHz and an IF input bandwidth of 1.0 GHz, housed in a 20-pin TSSOP package. It integrates two phase-locked loops with low-noise digital phase-frequency detectors, precision charge pumps, programmable reference counters, dual-modulus prescalers, and a 3-wire serial interface for register control.

A phase-locked loop, or PLL, is a frequency-control circuit that compares an output signal with a reference frequency and uses feedback to maintain a stable relationship between them. The ADF4212L belongs to the frequency synthesizer hierarchy, where PLL synthesizers support voltage-controlled oscillators in communication transmitters and receivers. The ADF4212L series is specifically positioned for dual RF and IF local-oscillator generation.

The synthesizer supports RF and IF prescaler ratios of 8/9, 16/17, 32/33, and 64/65. Programmable charge-pump currents support different loop-filter and phase-error requirements, while analog and digital lock detection allow a system to monitor operating state. The 3-wire serial interface simplifies connection with a host controller, and the power-down mode helps reduce consumption when the synthesizer is not in use.

Its 2.7 V to 5.5 V power-supply range supports both 3 V and 5 V system architectures. A separate charge-pump supply permits an extended tuning-voltage range, which is useful when the external voltage-controlled oscillator requires more headroom than the main supply provides. The low-power ADF4212L variant is intended to reduce total current when dual RF and IF synthesis is required.

Typical uses include wireless receiver and transmitter local oscillators, frequency conversion in RF and IF signal paths, communication infrastructure, instrumentation, and test equipment. Each PLL can support a separate local-oscillator path, reducing external synthesizer count when a design requires both RF and IF frequencies.

PCB implementation should preserve a compact loop-filter layout near the charge-pump and synthesizer outputs. The digital interface, reference input, power rails, and RF/IF inputs require careful grounding and decoupling. The external reference and loop-filter components determine phase-noise performance, lock time, and tuning range.

This product record combines the manufacturer’s device description, package and frequency information, and practical implementation guidance with a structured comparison against other Analog Devices synthesizer choices. It also identifies where pin, electrical, and lifecycle details must be confirmed directly in the manufacturer documentation before a new layout is released.

Drop-in alternatives for ADF4212LBRUZ-RL — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with ADF4212LBRUZ-RL (same form factor and footprint) — differing in Package, Device Type, Charge Pump Current, Power-Down Mode, Serial Interface.

Analog Devices
Package: 20-lead TSSOP, 4.40 mm width
Device Type: Dual phase-locked-loop clock/frequency synthesizer IC
Compare with ADF4212LBRUZ-RL →
Analog Devices
Package: 20-TSSOP, 4.40 mm width
Compare with ADF4212LBRUZ-RL →
Analog Devices
Package: 20-lead TSSOP, 0.173 in x 4.40 mm width
Device Type: Dual RF PLL frequency synthesizer (integer-N)
Charge Pump Current: Selectable
Compare with ADF4212LBRUZ-RL →
Analog Devices
Package: 20-lead TSSOP, 0.173 in x 4.40 mm width
Device Type: Dual RF PLL frequency synthesizer (integer-N)
Charge Pump Current: Selectable
Compare with ADF4212LBRUZ-RL →
Analog Devices
Package: TSSOP-20
Serial Interface: 3-wire
Compare with ADF4212LBRUZ-RL →

ADF4212LBRUZ-RL7

✅ Drop-In
📦 20-pin TSSOP
Same ADF4212L function, 2.4 GHz RF bandwidth, and 20-pin TSSOP footprint; the orderable suffix differs by 0% in stated key performance

📋 Reference alternative (not in catalog)

ADF4212LBRU

✅ Drop-In
📦 20-pin TSSOP
Same ADF4212L family and 20-pin TSSOP footprint; exact orderable suffix and packaging configuration differ, with no stated change to the 2.4 GHz RF or 1.0 GHz IF limits

📋 Reference alternative (not in catalog)

ADF4212BRUZ-RL

✅ Drop-In
📦 20-pin TSSOP
Shares the 2.4 GHz RF and 1.0 GHz IF family limits and 20-pin TSSOP footprint, but belongs to the standard ADF4212 family rather than the 7.5 mA-IDD ADF4212L low-power variant

📋 Reference alternative (not in catalog)

ADF4212BRUZ

✅ Drop-In
Analog Devices
📦 20-pin TSSOP
Dual phase-locked-loop clock/frequency synthesizer IC · 2.7 GHz · 1.0 GHz · 2.7 V to 5.5 V · Yes · 8/9, 16/17, 32/33, and 64/65 · Programmable · 3-wire

Contact for price

View Datasheet →

ADF4212LBRUZ-RL Specifications

Device Type Dual RF/IF PLL frequency synthesizer
Maximum RF Input Frequency 2.4 GHz
Maximum IF Input Frequency 1.0 GHz
Supply Voltage Range 2.7 V to 5.5 V
Architecture Dual phase-locked loop
RF/IF Prescaler Ratios 8/9, 16/17, 32/33, and 64/65
Charge Pump Current Programmable
Reference Counter 15-bit programmable R counter
Serial Control Interface 3-wire
Lock Detection Analog and digital
Fastlock Mode Supported
Power-Down Mode Supported
Charge Pump Supply Separate VP supply
Total IDD 7.5 mA
Package 20-pin TSSOP, 0.173 in (4.40 mm) width
Mounting Type Surface mount
Temperature Grade Industrial
RoHS Status Compliant

ADF4212LBRUZ-RL 20-pin tssop, 0.173 in (4.40 mm) width Pin Configuration Guide

Pin configuration for ADF4212LBRUZ-RL (20-pin tssop, 0.173 in (4.40 mm) width package). Pin numbering, functions, and connection diagrams are defined in the manufacturer datasheet. Refer to it for the exact footprint and soldering guidelines.

20-pin tssop, 0.173 in (4.40 mm) width package pinout diagram for ADF4212LBRUZ-RL

No detailed pinout data available for ADF4212LBRUZ-RL.

Refer to the datasheet for full pin configuration.

Typical Applications

ADF4212LBRUZ-RL is suitable for 6 applications: Wireless Transmitter Local Oscillator, Wireless Receiver IF Local Oscillator, Dual-Band RF Frequency Conversion, RF Test and Measurement Instrument, Low-Power Communication Equipment, Frequency Conversion in Industrial Systems.

🌐

Wireless Transmitter Local Oscillator

The ADF4212LBRUZ-RL fits a wireless transmitter that requires an RF local oscillator for an up-conversion mixer. Its RF input bandwidth reaches 2.4 GHz, allowing the PLL to evaluate a divided VCO output against the programmable reference path. The external VCO and loop filter set practical phase noise and lock time, while the device’s 2.7 V to 5.5 V supply range supports 3 V and 5 V radio architectures. The 20-pin TSSOP package also keeps the implementation compatible with the broader ADF4212 family footprint.

🌐

Wireless Receiver IF Local Oscillator

The second synthesizer channel in the ADF4212LBRUZ-RL can generate an IF local-oscillator signal alongside an RF local oscillator. Its 1.0 GHz IF bandwidth directly addresses low- and intermediate-frequency receiver architectures, while the RF channel remains available up to 2.4 GHz. The dual architecture can reduce the number of separate PLL packages in a receiver. Design attention should remain on reference routing, independent loop filters, VCO tuning-voltage headroom, and isolation between the two RF-sensitive signal paths.

📡

Dual-Band RF Frequency Conversion

The ADF4212LBRUZ-RL is appropriate for RF systems that need separate local-oscillator paths for different conversion stages. The RF channel supports frequencies through 2.4 GHz, and the IF channel supports frequencies through 1.0 GHz. This arrangement can simplify the control layout compared with using two unrelated synthesizers because both channels are programmed through the same 3-wire interface family. The design trade-off is shared supply and reference infrastructure, which must be laid out carefully to prevent coupling from the charge-pump and digital programming paths into the VCOs.

🔧

RF Test and Measurement Instrument

The ADF4212LBRUZ-RL can support programmable local-oscillator generation in RF instrumentation because two channels provide RF and IF synthesis from a common reference. Its programmable prescaler ratios of 8/9, 16/17, 32/33, and 64/65 support division choices appropriate to different VCO frequencies. Programmable charge-pump current permits the loop design to be adapted to different phase-error and lock requirements. The principal system-level considerations are reference phase noise, loop-filter component selection, and isolation between the synthesizer, VCO, and measurement paths.

📱

Low-Power Communication Equipment

The ADF4212LBRUZ-RL is appropriate for portable or low-power communication equipment that benefits from a compact dual-frequency synthesizer. Its low-power ADF4212L identity and 7.5 mA total IDD provide a concrete advantage over the standard ADF4212 family when supply consumption is important. The 20-pin TSSOP package limits board area, while the 2.7 V to 5.5 V operating range supports compact system rails. Designers should still evaluate total power including the external VCO, reference source, charge-pump circuitry, and any required output buffering.

🏭

Frequency Conversion in Industrial Systems

An industrial RF system can use the ADF4212LBRUZ-RL when one subsystem requires both an RF local oscillator and an IF local oscillator. The dual PLL organization allows both synthesis paths to share reference and controller resources, reducing board-space demands compared with separate devices. The 2.4 GHz RF and 1.0 GHz IF limits align with many frequency-conversion architectures, while the low-power L-series designation suits compact embedded equipment. Industrial implementation should include grounding, filtering, and qualification checks based on the actual operating environment rather than assumptions about generic RF performance.

Recommended Products Summary

ADF4212LBRUZ-RL7 Same low-power dual-PLL family in an alternate orderable configuration Used in: Wireless Transmitter Local Oscillator, Wireless Receiver IF Local Oscillator, RF Test and Measurement Instrument, Low-Power Communication Equipment, Frequency Conversion in Industrial Systems ADF4212BRUZ-RL Standard-power family alternative with the same TSSOP format Used in: Wireless Transmitter Local Oscillator, Dual-Band RF Frequency Conversion, Frequency Conversion in Industrial Systems ADF4212LBRU Same ADF4212L low-power synthesizer family Used in: Wireless Receiver IF Local Oscillator, RF Test and Measurement Instrument, Low-Power Communication Equipment ADF4212BRUZ Analog Devices Used in: Dual-Band RF Frequency Conversion
What is the ADF4212LBRUZ-RL?
The ADF4212LBRUZ-RL is a low-power, dual phase-locked-loop frequency synthesizer from Analog Devices. It supports RF input frequencies up to 2.4 GHz and IF input frequencies up to 1.0 GHz, with two synthesizer channels for RF and IF local-oscillator generation. The device uses a 3-wire serial interface and is packaged in a 20-pin TSSOP.
What are the key specifications of ADF4212LBRUZ-RL that engineers should know?
The ADF4212LBRUZ-RL combines two PLL synthesizer channels, a 2.4 GHz maximum RF bandwidth, a 1.0 GHz maximum IF bandwidth, and a 2.7 V to 5.5 V supply range in a 20-pin TSSOP. According to the Analog Devices ADF4212L product information, it includes programmable RF and IF prescalers, programmable charge-pump current, analog and digital lock detection, Fastlock mode, and power-down operation.
Where can I download the ADF4212LBRUZ-RL datasheet?
The ADF4212LBRUZ-RL datasheet and product information are available from the Analog Devices ADF4212L product page at https://www.analog.com/en/products/adf4212l.html. The family documentation covers the synthesizer architecture, register interface, electrical characteristics, RF and IF prescaler options, reference counter, lock detection, and application guidance for RF and IF local oscillators.
What is the pinout of ADF4212LBRUZ-RL?
The ADF4212LBRUZ-RL uses a 20-pin TSSOP package, but the individual pin numbers and names must be assigned from the pin-description table in the Analog Devices manufacturer datasheet. Use that table when routing the two synthesizer channels, reference input, charge-pump supply, programming interface, and grounds on the PCB.
Is ADF4212LBRUZ-RL suitable for wireless receiver and transmitter local oscillators?
Yes, the ADF4212LBRUZ-RL is suitable for dual RF and IF local-oscillator generation in wireless receivers and transmitters. Its 2.4 GHz RF bandwidth, 1.0 GHz IF bandwidth, and dual PLL architecture allow one device to support two frequency-generation paths. The external VCO and loop-filter implementation determines phase noise, lock time, and tuning range.
What power supply does ADF4212LBRUZ-RL require?
The ADF4212LBRUZ-RL operates from a 2.7 V to 5.5 V main power supply, allowing use in 3 V and 5 V systems. Analog Devices also identifies a separate VP charge-pump supply, which extends the available tuning voltage for systems whose external VCO requires more headroom than the main supply can provide.
What can replace ADF4212LBRUZ-RL?
The closest documented replacements are Analog Devices ADF4212BRUZ-RL, ADF4212LBRU, ADF4212BRUZ, and ADF4212LBRUZ-RL7 when their specific electrical and orderable configuration match the design. No cross-brand drop-in replacement was established. Review the Analog Devices pin descriptions, register map, electrical limits, and frequency limits before approving any substitute.
What is the best drop-in replacement for ADF4212LBRUZ-RL?
ADF4212LBRUZ-RL7 is the closest orderable alternative identified for a design that must preserve the exact ADF4212L function and 20-pin TSSOP footprint. It differs mainly in reel or orderable packaging notation. The non-L ADF4212BRUZ-RL is not a like-for-like choice when lower power consumption is a requirement because it belongs to the higher-power ADF4212 family.
ADF4212LBRUZ-RL vs ADF4212BRUZ-RL: which is better for low-power designs?
The ADF4212LBRUZ-RL is the better choice for a design explicitly optimized for low power. It belongs to the ADF4212L low-power family and is identified with 7.5 mA total IDD. ADF4212BRUZ-RL is from the standard ADF4212 family, so its current consumption and exact specifications should be checked against the manufacturer datasheet before treating the two as interchangeable.
When should I choose ADF4212LBRUZ-RL over another PLL synthesizer?
Choose ADF4212LBRUZ-RL when the design needs two coordinated RF and IF local oscillators, a 20-pin TSSOP implementation, and low-power dual PLL operation. Its 2.4 GHz RF and 1.0 GHz IF bandwidths align with wireless frequency-conversion architectures. Select another family member when a different frequency limit, prescaler set, package, or orderable configuration better matches the VCO and system requirements.
Is ADF4212LBRUZ-RL the same as ADF4216BRUZ-RL?
No, the ADF4212LBRUZ-RL and ADF4216BRUZ-RL belong to different synthesizer families and should not be treated as identical merely because both use a 20-pin TSSOP package. The ADF4212L supports RF operation up to 2.4 GHz and IF operation up to 1.0 GHz. Compare the complete ADF4216 electrical limits, register map, pin assignments, and loop-filter requirements before considering it.
What is the best Analog Devices equivalent for ADF4212LBRUZ-RL?
ADF4212LBRUZ-RL7 is the closest Analog Devices equivalent identified for an exact-function, same-package design. The standard-family ADF4212BRUZ-RL can also share the 20-pin TSSOP format, but it is not the preferred choice when the low-power ADF4212L specification is essential. Confirm pin behavior and register compatibility in the manufacturer documentation before replacement.
Where can I buy ADF4212LBRUZ-RL and check its lead time?
Use the Request a Quote form on this page to request ADF4212LBRUZ-RL pricing, current inventory, minimum order quantity, and lead time. The form provides a single purchasing channel for an exact-orderable MPN and avoids static price information becoming outdated. Include your target quantity, package preference, and required delivery date with the request.
What is the price of ADF4212LBRUZ-RL?
The current commercial terms for ADF4212LBRUZ-RL should be requested through the Request a Quote form on this page. Pricing depends on order quantity, orderable packaging, current inventory, and fulfillment requirements. Submit the exact MPN ADF4212LBRUZ-RL so the quote is tied to the required configuration rather than a broader ADF4212 family.
Is ADF4212LBRUZ-RL in stock?
Request current stock status for ADF4212LBRUZ-RL using the Request a Quote form on this page. Inventory can vary with package, reel quantity, and order volume, so confirm the complete ordering information before committing the BOM. Include your annual usage, forecast, and required delivery schedule to obtain an actionable availability response.

Engineering reference data for ADF4212LBRUZ-RL — comparison, design guidance, and compliance information.

Selection Guide

Choose the ADF4212LBRUZ-RL for dual RF and IF frequency synthesis when a 20-pin TSSOP implementation, operation up to 2.4 GHz at RF, operation up to 1.0 GHz at IF, and low-power operation are priorities. The separate VP supply is valuable when the external VCO needs more tuning headroom than the main 2.7 V to 5.5 V rail can provide. Select ADF4212LBRUZ-RL7 when that exact low-power function is required but the alternate orderable configuration better fits assembly or purchasing needs. Consider ADF4212BRUZ-RL or ADF4212BRUZ only when the higher-power standard ADF4212 characteristics are acceptable and the register, pin, and electrical details have been reconciled. The absence of a verified cross-brand drop-in means a new footprint or firmware change may be necessary when changing manufacturers.

Comparison with Alternatives

Parameter This Product ADF4212LBRUZ-RL7 ADF4212LBRU ADF4212BRUZ-RL ADF4212BRUZ
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Package 20-pin TSSOP 20-pin TSSOP - same 20-pin TSSOP - same 20-pin TSSOP - same 20-pin TSSOP - same
Product Family ADF4212L low-power dual PLL ADF4212L low-power dual PLL ADF4212L low-power dual PLL ADF4212 standard dual PLL ADF4212 standard dual PLL
Maximum RF Frequency 2.4 GHz 2.4 GHz 2.4 GHz 2.4 GHz 2.4 GHz
Maximum IF Frequency 1.0 GHz 1.0 GHz 1.0 GHz 1.0 GHz 1.0 GHz
Supply Voltage Range 2.7 V to 5.5 V 2.7 V to 5.5 V 2.7 V to 5.5 V 2.7 V to 5.5 V 2.7 V to 5.5 V
Prescaler Ratios RF/IF: 8/9, 16/17, 32/33, 64/65 RF/IF: 8/9, 16/17, 32/33, 64/65 RF/IF: 8/9, 16/17, 32/33, 64/65 RF/IF: 8/9, 16/17, 32/33, 64/65 RF/IF: 8/9, 16/17, 32/33, 64/65
Control Interface 3-wire serial interface 3-wire serial interface 3-wire serial interface 3-wire serial interface 3-wire serial interface
Lock Detection Analog and digital Analog and digital Analog and digital Analog and digital Analog and digital

Key Differentiators

  • Low-power dual PLL implementation (vs ADF4212BRUZ-RL)
  • Dual RF and IF synthesis in one package (vs ADF4212LBRU)
  • Broad prescaler selection (vs ADF4212BRUZ)
  • Separate extended tuning-voltage supply (vs ADF4212LBRUZ-RL7)

Design Notes

Place each synthesizer channel’s loop-filter components close to the associated charge-pump output and VCO control input. Keep the 3-wire programming traces away from RF and IF inputs, and provide a solid ground plane with short return paths. The separate VP supply should be decoupled locally because its voltage sets the available VCO tuning range.

Route the reference signal as a controlled-impedance trace and keep it isolated from charge-pump outputs and switching supplies. Reference phase noise can directly limit synthesizer phase noise, while clock-like programming activity may couple into sensitive RF paths. Use ground guards and short digital return paths where the board stackup permits.

Design the supply network for both the 2.7 V to 5.5 V main rail and the separate VP charge-pump rail. Follow the manufacturer’s recommended decoupling values and route each capacitor directly to its relevant power pin. Confirm that the VP range covers the external VCO tuning-voltage requirement rather than assuming the main supply provides sufficient headroom.

Do not substitute a standard ADF4212 and an ADF4212L solely because both use a 20-pin TSSOP package. The L-series designation identifies the low-power variant with 7.5 mA total IDD. Before replacement, verify pin functions, register behavior, lock-detect implementation, electrical limits, and the intended tape-and-reel ordering suffix in the Analog Devices documentation.

Compliance Information

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

RoHS compliance is indicated in the product comparison information for the ADF4212 family. Other compliance declarations are not established by the cited product records.

Data verified on: 2026-11-15 — data verified and curated by XAIPART's component engineering team

Related Searches

ADF4212LBRUZ-RL datasheet ADF4212LBRUZ-RL specifications ADF4212LBRUZ-RL pinout ADF4212LBRUZ-RL datasheet pdf ADF4212LBRUZ-RL equivalent ADF4212LBRUZ-RL replacement ADF4212LBRUZ-RL cross reference ADF4212LBRUZ-RL footprint ADF4212LBRUZ-RL price ADF4212LBRUZ-RL stock Analog Devices ADF4212LBRUZ-RL ADF4212LBRUZ-RL vs ADF4212BRUZ-RL ADF4212LBRUZ-RL application circuit

Related Components & Terms

Analog Devices ADF4212LBRUZ-RL ADF4212LBRUZ-RL7 ADF4212LBRU ADF4212BRUZ-RL ADF4212BRUZ phase-locked loop PLL frequency synthesizer local oscillator dual-modulus prescaler phase-frequency detector charge pump 3-wire serial interface voltage-controlled oscillator loop filter Fastlock mode analog lock detection digital lock detection TSSOP-20 surface-mount package RoHS wireless receiver wireless transmitter RF frequency conversion
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details