Analog Devices

ADF4350ABCPZ - 4.4 GHz Fractional-N PLL | Analog Devices

MPN: ADF4350ABCPZ ✓ Active
32-lead WFQFN with exposed pad, 4 mm x 4 mm Package 2200 MHz to 4400 MHz Speed
MOQ: 1 |

ADF4350ABCPZ Overview

Analog Devices ADF4350ABCPZ is a wideband fractional-N or integer-N phase-locked-loop frequency synthesizer with an integrated voltage-controlled oscillator, a 2200 MHz to 4400 MHz fundamental VCO range, and RF output frequencies down to 137.5 MHz through selectable divide-by-1/2/4/8/16 outputs. The device is packaged in a 32-lead WFQFN package with an exposed pad and is identified by Analog Devices as a production part.

A frequency synthesizer is a timing and RF integrated circuit that locks a voltage-controlled oscillator to a stable reference frequency. The ADF4350 belongs to the phase-locked-loop family, combining a PLL synthesizer, programmable frequency dividers, an RF output stage, and an integrated VCO. This integration allows a compact RF signal source to be built from one synthesizer IC, an external reference, an external loop filter, and passive RF-matching components.

The ADF4350 supports both fractional-N and integer-N synthesis, giving designers a choice between fine frequency resolution and integer channel spacing. Its integrated VCO covers 2200 MHz to 4400 MHz, while the divider network extends the usable RF output range to 137.5 MHz. Pin-controlled and software-controlled output muting provide additional ways to manage signal availability, isolation, and test conditions without removing the synthesizer from the circuit.

The external reference and loop filter are central to achieving useful phase-noise and lock performance. Reference quality, loop bandwidth, charge-pump settings, divider selection, and component placement all influence the final spectrum. Because the VCO and output circuitry operate at high RF frequencies, layout must minimize loop-filter pickup, preserve a short RF return path, and provide adequate decoupling around the device supplies.

Typical uses include wireless infrastructure, test and measurement equipment, frequency-agile local oscillators, radio equipment, and microwave signal generators. The ADF4350ABCPZ is particularly appropriate when one component must cover multiple RF bands while retaining programmable output frequency and programmable output division.

Designers should select external capacitors and the loop filter from the manufacturer's application guidance, verify the reference and output interfaces against the pin description, and confirm thermal and RF performance at the intended carrier frequency. The exposed thermal pad should be connected to the ground plane using the manufacturer-recommended thermal-via pattern so that heat is removed effectively and RF return currents remain controlled.

This product page combines the manufacturer's synthesis capabilities with practical pin, application, replacement, layout, and sourcing guidance. It also distinguishes genuine pin-compatible alternatives from related devices that may differ in frequency range, qualification, divide ratio, or operating temperature.

Drop-in alternatives for ADF4350ABCPZ — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with ADF4350ABCPZ (same form factor and footprint) — differing in Package, Operating Temperature Range, Output Frequency Range, Product Type.

Analog Devices
Package: 32-LFCSP (5 mm x 5 mm) with exposed pad
Operating Temperature Range: -40C to +85C
Output Frequency Range: 137.5 MHz to 4400 MHz
Compare with ADF4350ABCPZ →
Analog Devices
Package: 32-WFQFN exposed pad, CSP
Operating Temperature Range: -40°C to +85°C
Product Type: Fractional-N and Integer-N PLL frequency synthesizer with integrated VCO
Compare with ADF4350ABCPZ →
Analog Devices
Package: 32-lead VFQFN exposed pad, CSP
Output Frequency Range: Up to 4400 MHz
Product Type: RF clock and frequency synthesizer IC
Compare with ADF4350ABCPZ →

ADF4350BCPZ

✅ Drop-In
Analog Devices
📦 32-lead WFQFN with exposed pad
137.5 MHz to 4400 MHz · 2200 MHz to 4400 MHz · Fractional-N / Integer-N PLL · Up to 32 MHz (typical) · Divide-by-1/2/4/8/16 · Sub-Hz resolution

Contact for price

View Datasheet →

ADF4351BCPZ

✅ Drop-In
Analog Devices
📦 32-lead WFQFN with exposed pad
RF clock and frequency synthesizer IC · Fractional-N and integer-N · Yes · 2200 MHz to 4400 MHz · 4400 MHz · 10 MHz to 250 MHz · 3 V to 3.6 V · 32-lead VFQFN exposed pad, CSP

Contact for price

View Datasheet →

ADF4351ABCPZ

✅ Drop-In ⚠️ Specs Unverified
📦 32-lead WFQFN with exposed pad
Same-family package and pin arrangement with broader low-frequency range than the ADF4350; register and RF behavior require validation

📋 Reference alternative (not in catalog)

ADF4350ABCPZ-RL7

✅ Drop-In
📦 32-lead WFQFN with exposed pad
Same ADF4350ABCPZ electrical device with a different reel packing code; exact suffix ordering code must be changed in the BOM

📋 Reference alternative (not in catalog)

ADF4350ABCPZ Specifications

Device Type Wideband fractional-N/integer-N PLL frequency synthesizer
Integrated VCO Fundamental Frequency Range 2200 MHz to 4400 MHz
RF Output Frequency Range 137.5 MHz to 4400 MHz
Maximum Stated RF Output Frequency 4.4 GHz
Minimum Stated RF Output Frequency 137.5 MHz
Synthesizer Modes Fractional-N and integer-N
Output Divider Options Divide by 1, 2, 4, 8, or 16
RF Output Muting Pin-controllable and software-controllable
Loop Filter External
Package 32-lead WFQFN with exposed pad, 4 mm x 4 mm

ADF4350ABCPZ 32-lead wfqfn with exposed pad, 4 mm x 4 mm Pin Configuration Guide

Pin configuration for ADF4350ABCPZ (32-lead wfqfn with exposed pad, 4 mm x 4 mm package). Pin numbering, functions, and connection diagrams are defined in the manufacturer datasheet. Refer to it for the exact footprint and soldering guidelines.

32-lead wfqfn with exposed pad, 4 mm x 4 mm package pinout diagram for ADF4350ABCPZ

No detailed pinout data available for ADF4350ABCPZ.

Refer to the datasheet for full pin configuration.

Typical Applications

ADF4350ABCPZ is suitable for 6 applications: Wireless Infrastructure RF Local Oscillator, Microwave Signal Generator, Frequency-Agile Test Equipment, Radio Equipment Frequency Synthesizer, Frequency Hopping Communication System, RF Power and Microwave Circuit Testing.

🌐

Wireless Infrastructure RF Local Oscillator

The ADF4350ABCPZ is suited to programmable RF local-oscillator generation in wireless infrastructure because its integrated VCO covers 2200 MHz to 4400 MHz and its output dividers extend operation down to 137.5 MHz. The synthesizer can therefore serve radio designs operating near cellular, microwave, or other allocated RF bands without requiring a separate VCO. Fractional-N operation provides fine frequency increments, while integer-N operation remains available for designs that prefer integer channel spacing. In a practical implementation, the device sits between a stable reference and the RF signal chain, with the external loop filter determining loop dynamics and spectral performance. Pin- and software-controlled RF muting can support isolation, calibration, and production-test sequences, although register compatibility and the final reference and filter implementation must be validated for each band.

📡

Microwave Signal Generator

A microwave signal generator can use the ADF4350ABCPZ as its programmable RF source because the device combines a PLL, integrated wideband VCO, programmable frequency divider, and RF output stage in one package. Its 4.4 GHz maximum stated RF output supports instrumentation for microwave component test, antenna measurement, and communications-system alignment. The 137.5 MHz lower limit extends utility to lower RF test points without replacing the VCO. In operation, a reference oscillator supplies a stable frequency, the external loop filter controls phase and frequency acquisition, and an output network provides impedance matching. Designers should verify allowable output power, harmonic content, spur performance, and reference requirements from the data sheet before assigning the source to a particular measurement class, because those results are system-dependent.

🖥️

Frequency-Agile Test Equipment

The ADF4350ABCPZ supports frequency-agile laboratory and production test equipment by combining a 2200 MHz to 4400 MHz VCO with programmable divide-by-1/2/4/8/16 outputs. This allows one RF synthesizer platform to address multiple test frequencies from 137.5 MHz to 4400 MHz. Fractional-N operation is useful when the test system requires finely spaced channel positions, while integer-N operation can simplify channel planning. During a sweep, software programming changes the synthesis configuration and the output-mute functions can suppress RF during settling or measurement transitions. The external loop filter and reference remain central to sweep speed and phase-noise performance, so automated test designs should characterize lock behavior and spurious responses across their actual reference frequency and operating bandwidth.

📻

Radio Equipment Frequency Synthesizer

The ADF4350ABCPZ fits radio equipment requiring an agile, programmable RF source because it supports fractional-N and integer-N synthesis over a broad RF range. The integrated VCO eliminates the need for an external resonator in designs that operate from 2200 MHz through 4400 MHz, while selectable division expands the usable range to 137.5 MHz. Its RF output can be muted by hardware or software, which is useful for transmit/receive isolation and controlled test intervals. A production implementation must use an approved external reference, calculate the loop filter for the required lock bandwidth, and verify output matching and filtering. Exact register configuration, output level, and spectral limits should be established from the manufacturer's data sheet and application guidance rather than inferred solely from the frequency range.

🌐

Frequency Hopping Communication System

The ADF4350ABCPZ can support frequency-hopping communication systems by reprogramming the fractional-N or integer-N synthesizer across its 137.5 MHz to 4400 MHz RF output range. Rapid channel changes are possible through the digital programming interface, while the integrated VCO and output divider concentrate frequency generation into a single package. For hopping systems, the external reference and loop filter determine settling behavior, and the RF output-mute function can coordinate channel transitions with receiver or transmit-chain timing. Designers should evaluate lock time, reference phase noise, channel spacing, and unwanted spurs for the intended hopping sequence. The ADF4351BCPZ may be considered when operation below the ADF4350's 137.5 MHz limit is needed, but its additional range and performance differences require an intentional design review rather than an unqualified substitution.

⚡

RF Power and Microwave Circuit Testing

The ADF4350ABCPZ is useful as a controllable stimulus source for RF power and microwave circuit testing because its programmable output division permits a single device to cover widely separated test frequencies. A bench or automated test receiver can use the synthesizer output as the LO for mixers, detectors, amplifiers, and frequency-conversion blocks. The 2.2 GHz to 4.4 GHz integrated-VCO range covers the upper microwave portion of the ADF4350 family, while divided outputs address lower RF test points. Output muting provides a practical means to control signal presence during path calibration. Engineers should include appropriate attenuation and matching in the external RF path, verify that the programmed divider does not compromise unwanted-signal requirements, and assess phase noise and lock performance against the measurement bandwidth.

Recommended Products Summary

What is the ADF4350ABCPZ frequency range?
The ADF4350ABCPZ covers a fundamental VCO range of 2200 MHz to 4400 MHz and provides RF output frequencies from 137.5 MHz to 4400 MHz using its programmable output divider. According to the Analog Devices ADF4350 data sheet, Rev. B, divide-by-1/2/4/8/16 circuits extend the low-frequency capability of the integrated wideband synthesizer.
What type of IC is the ADF4350ABCPZ?
The ADF4350ABCPZ is a wideband PLL frequency synthesizer with an integrated voltage-controlled oscillator. It supports fractional-N and integer-N operation, uses an external loop filter and external reference, and offers programmable RF output division. The Analog Devices product page identifies the ADF4350 family as a production wideband synthesizer with an integrated VCO.
Where can I download the ADF4350ABCPZ datasheet PDF?
The official ADF4350ABCPZ data sheet PDF is available from Analog Devices at the manufacturer URL listed on this page. According to the ADF4350 data sheet, Rev. B, the document describes the integrated VCO, PLL architecture, output dividers, register programming, loop-filter requirements, and application information. Use the Analog Devices PDF rather than a third-party mirror when validating electrical limits.
Can I find the ADF4350ABCPZ pinout?
The ADF4350ABCPZ uses a 32-lead WFQFN package with an exposed thermal pad. Its complete numbered pin description, including supply, ground, reference, RF-output, programming-interface, and exposed-pad assignments, appears in the pin-description table of the Analog Devices ADF4350 data sheet, Rev. B. Use that table when assigning PCB nets and checking exposed-pad grounding.
What is the best drop-in replacement for the ADF4350ABCPZ?
The closest identified same-family replacement is the ADF4350BCPZ because it uses the same 32-lead WFQFN format and supports the same 4.4 GHz-class wideband synthesizer function. The ADF4351BCPZ may also fit existing ADF4350 designs according to Analog Devices technical discussion, but its wider low-frequency range and improved modulation characteristics require review. A replacement is not qualified solely by package appearance; register behavior and RF specifications must also be checked.
Can the ADF4351BCPZ replace the ADF4350ABCPZ?
The ADF4351BCPZ can be used in some existing ADF4350 designs, according to an Analog Devices EngineerZone discussion, but it is not a blind substitution. The ADF4351 extends operation down to 35 MHz and offers stated in-band phase-noise and modulation-performance improvements. Existing designs should be checked for divider-range assumptions, register compatibility, reference requirements, output behavior, and PCB-level RF performance before conversion.
When should I choose the ADF4350ABCPZ over the ADF4350BCPZ?
Choose the ADF4350ABCPZ when the exact qualified orderable MPN is required by the design, bill of materials, or approved-parts process. Choose the ADF4350BCPZ when its manufacturer ordering code is acceptable and the system only requires the same family function and 32-lead WFQFN footprint. Both support the core wideband synthesizer role, so the decisive factors are approved-device status, qualification requirements, documentation revision, and lifecycle planning.
Is the ADF4350ABCPZ suitable for radio-frequency signal generation?
Yes, the ADF4350ABCPZ is designed for programmable RF signal generation from 137.5 MHz through 4400 MHz. Its integrated VCO, selectable output dividers, fractional-N and integer-N modes, and programmable output muting make it suitable for radio, microwave, communications, and test-equipment RF local oscillators. The final phase-noise and spur performance still depends on reference quality, loop-filter design, layout, and output matching.
How does the ADF4350ABCPZ compare with an integer-N PLL?
The ADF4350ABCPZ supports both integer-N and fractional-N synthesis. Integer-N operation uses integer feedback division, while fractional-N operation enables fine frequency increments through fractional feedback division. According to the Analog Devices ADF4350 data sheet, Rev. B, the choice affects frequency resolution and loop-filter requirements, so the preferred mode should be selected according to the channel plan and required spectral performance.
Where can I buy the ADF4350ABCPZ?
Use the Request a Quote form on this page to request current ADF4350ABCPZ availability, commercial terms, and lead time. The request should include the required quantity, target delivery date, and whether reel or another approved packing format is needed. Current supply and commercial conditions should be confirmed at the time of quotation because component availability can change.
What is the price of the ADF4350ABCPZ?
Current commercial pricing for the ADF4350ABCPZ is obtained through the Request a Quote form on this page. Submit the required quantity, delivery location, target date, and packaging requirements to receive a current quotation. This keeps the commercial response tied to the exact MPN and the requested order rather than a family-level or starting-from price.
What is the lead time for the ADF4350ABCPZ?
The current lead time for the ADF4350ABCPZ should be confirmed through the Request a Quote form on this page. Include the quantity, shipment destination, requested date, and approved packing method in the request. For production planning, also account for any qualification, assembly, or component-availability constraints applicable to the end product.
Is the ADF4350ABCPZ currently in stock?
Current stock status for the exact ADF4350ABCPZ is best confirmed through the Request a Quote form on this page. The Analog Devices product page identifies the ADF4350 family as production, while individual orderable-device inventory can vary. Provide the required quantity and delivery schedule so the quotation can reflect current availability rather than an unqualified stock claim.
What are the key specifications of the ADF4350ABCPZ that engineers should know?
The principal specifications are a 2200 MHz to 4400 MHz integrated-VCO range, an overall RF output range of 137.5 MHz to 4400 MHz, fractional-N and integer-N synthesis, and divide-by-1/2/4/8/16 output options. The device also provides pin- and software-controlled output muting and uses an external loop filter. These are the central functional figures in the Analog Devices ADF4350 data sheet, Rev. B.
What can replace the ADF4350ABCPZ?
The identified replacement path begins with the Analog Devices ADF4350BCPZ, which provides the same family function in the same 32-lead WFQFN format. The ADF4351BCPZ is another same-family candidate for existing ADF4350 designs, subject to review of its wider frequency range and behavioral differences. Do not treat a generic PLL as a drop-in replacement because the ADF4350 integrates a wideband VCO, divider network, RF output stage, and programming interface.
What is the best Analog Devices equivalent for the ADF4350ABCPZ?
The ADF4350BCPZ is the closest Analog Devices family equivalent identified for the ADF4350ABCPZ because both are 32-lead WFQZN-style wideband synthesizers with integrated VCOs covering the ADF4350's 2.2 GHz to 4.4 GHz fundamental range. The ADF4351BCPZ offers broader low-frequency reach and performance improvements, but it is not necessarily interchangeable without configuration and layout review. Exact MPN approval should remain part of the substitution process.

Engineering reference data for ADF4350ABCPZ — comparison, design guidance, and compliance information.

Selection Guide

Choose the ADF4350ABCPZ when the approved design specifically calls for the ADF4350 family, a 32-lead WFQFN implementation, and an RF output range of 137.5 MHz to 4400 MHz. The ADF4350BCPZ is the closest identified ordering alternative for designs that can use another family MPN without qualification constraints. Consider the ADF4351BCPZ when operation down to 35 MHz is valuable or when its improved in-band phase-noise and modulation characteristics justify a detailed review; its broader range and behavioral differences mean it should not be substituted without checking divider assumptions, registers, and RF performance. The ADF4350ABCPZ-RL7 provides the same electrical family with a different reel code, making it useful when the package form is appropriate but procurement requires a different ordering suffix. In every case, validate the exact pin map, reference interface, loop filter, output network, thermal design, and approved-part status before release.

Comparison with Alternatives

Parameter This Product ADF4350BCPZ ADF4351BCPZ ADF4351ABCPZ
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Package 32-lead WFQFN with exposed pad 32-lead WFQFN with exposed pad 32-lead WFQFN with exposed pad 32-lead WFQFN with exposed pad
Minimum RF Output Frequency 137.5 MHz 137.5 MHz 35 MHz 35 MHz
Maximum RF Output Frequency 4400 MHz 4400 MHz 4400 MHz 4400 MHz

Key Differentiators

  • Direct same-family ordering alternative (vs ADF4350BCPZ)
  • Broader low-frequency reach (vs ADF4351BCPZ)
  • Exact electrical family with alternate ordering code (vs ADF4350ABCPZ-RL7)

Design Notes

Keep the reference input, loop filter, RF output path, and decoupling network compact and separated from noisy switching nodes. Place the external loop-filter components close to their assigned pins and use the shortest practical ground return. The exposed pad should use the manufacturer's thermal-via arrangement and connect to the ground plane, while preserving controlled RF return paths around the package.

Do not assume that any device with a 32-lead WFQFN outline is interchangeable. The ADF4351 extends to 35 MHz and changes performance and behavior relative to the ADF4350, while suffix and reel codes affect ordering rather than electrical design. Confirm the exact pin mapping, register compatibility, frequency-divider assumptions, reference requirements, and approved-part status before treating a candidate as a drop-in replacement.

Validate reference phase noise, loop bandwidth, output filtering, and matching across the intended operating band. The external loop filter is not merely a stability component: its values and charge-pump settings influence lock behavior, spurs, and phase noise. Measure the assembled design across maximum and minimum channels, temperature corners, and supply conditions instead of relying only on nominal simulation results.

Use the exposed pad as a deliberate thermal and RF-ground structure. Apply the manufacturer's recommended via pattern, maintain uninterrupted ground-plane area beneath the package, and minimize thermal discontinuities in the board stack-up. Confirm junction-temperature and RF performance with the final enclosure, airflow, copper area, and adjacent heat sources because a laboratory board may not represent the completed system's thermal environment.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The exact environmental and qualification statements for ADF4350ABCPZ were not stated in the available manufacturer-page or distributor excerpts. Use the current Analog Devices product documentation and declaration for production qualification.

Related Searches

ADF4350ABCPZ datasheet ADF4350ABCPZ pinout ADF4350ABCPZ datasheet pdf ADF4350ABCPZ equivalent ADF4350ABCPZ replacement ADF4350ABCPZ cross reference ADF4350ABCPZ price ADF4350ABCPZ stock Analog Devices ADF4350ABCPZ ADF4350ABCPZ 4.4 GHz PLL ADF4350ABCPZ WFQFN footprint ADF4350ABCPZ vs ADF4351BCPZ

Related Components & Terms

Analog Devices ADF4350ABCPZ ADF4350BCPZ ADF4351BCPZ ADF4351ABCPZ ADF4350ABCPZ-RL7 frequency synthesizer phase-locked loop PLL fractional-N synthesizer integer-N synthesizer voltage-controlled oscillator VCO RF local oscillator clock and timing IC integrated circuit semiconductor 32-lead WFQFN QFN package family surface-mount package 137.5 MHz minimum RF output 4400 MHz maximum RF output output divider phase noise loop filter
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details