ADF4350ABCPZ - 4.4 GHz Fractional-N PLL | Analog Devices
MPN: ADF4350ABCPZ ✓ 啟用中ADF4350ABCPZ 概覽
A frequency synthesizer is a timing and RF integrated circuit that locks a voltage-controlled oscillator to a stable reference frequency. The ADF4350 belongs to the phase-locked-loop family, combining a PLL synthesizer, programmable frequency dividers, an RF output stage, and an integrated VCO. This integration allows a compact RF signal source to be built from one synthesizer IC, an external reference, an external loop filter, and passive RF-matching components.
The ADF4350 supports both fractional-N and integer-N synthesis, giving designers a choice between fine frequency resolution and integer channel spacing. Its integrated VCO covers 2200 MHz to 4400 MHz, while the divider network extends the usable RF output range to 137.5 MHz. Pin-controlled and software-controlled output muting provide additional ways to manage signal availability, isolation, and test conditions without removing the synthesizer from the circuit.
The external reference and loop filter are central to achieving useful phase-noise and lock performance. Reference quality, loop bandwidth, charge-pump settings, divider selection, and component placement all influence the final spectrum. Because the VCO and output circuitry operate at high RF frequencies, layout must minimize loop-filter pickup, preserve a short RF return path, and provide adequate decoupling around the device supplies.
Typical uses include wireless infrastructure, test and measurement equipment, frequency-agile local oscillators, radio equipment, and microwave signal generators. The ADF4350ABCPZ is particularly appropriate when one component must cover multiple RF bands while retaining programmable output frequency and programmable output division.
Designers should select external capacitors and the loop filter from the manufacturer's application guidance, verify the reference and output interfaces against the pin description, and confirm thermal and RF performance at the intended carrier frequency. The exposed thermal pad should be connected to the ground plane using the manufacturer-recommended thermal-via pattern so that heat is removed effectively and RF return currents remain controlled.
This product page combines the manufacturer's synthesis capabilities with practical pin, application, replacement, layout, and sourcing guidance. It also distinguishes genuine pin-compatible alternatives from related devices that may differ in frequency range, qualification, divide ratio, or operating temperature.
直接替換替代品,適用於 ADF4350ABCPZ — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: ADF4350ABCPZ (相同外形與佔位) — 差異在於 Package, Operating Temperature Range, Output Frequency Range, Product Type.
ADF4350BCPZ
✅ 直接替換聯絡詢價
查看資料表 →ADF4351BCPZ
✅ 直接替換聯絡詢價
查看資料表 →ADF4351ABCPZ
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
ADF4350ABCPZ-RL7
✅ 直接替換📋 參考替代品(不在目錄中)
ADF4350ABCPZ 規格
| Device Type | Wideband fractional-N/integer-N PLL frequency synthesizer |
| Integrated VCO Fundamental Frequency Range | 2200 MHz to 4400 MHz |
| RF Output Frequency Range | 137.5 MHz to 4400 MHz |
| Maximum Stated RF Output Frequency | 4.4 GHz |
| Minimum Stated RF Output Frequency | 137.5 MHz |
| Synthesizer Modes | Fractional-N and integer-N |
| Output Divider Options | Divide by 1, 2, 4, 8, or 16 |
| RF Output Muting | Pin-controllable and software-controllable |
| Loop Filter | External |
| 封裝 | 32-lead WFQFN with exposed pad, 4 mm x 4 mm |
ADF4350ABCPZ 32-lead wfqfn with exposed pad, 4 mm x 4 mm 腳位配置指南
ADF4350ABCPZ(32-lead wfqfn with exposed pad, 4 mm x 4 mm 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: ADF4350ABCPZ.
請參閱 資料表 以查看完整腳位配置。
典型應用
ADF4350ABCPZ 適用於 6 應用s: Wireless Infrastructure RF Local Oscillator, Microwave Signal Generator, Frequency-Agile Test Equipment, Radio Equipment Frequency Synthesizer, Frequency Hopping Communication System, RF Power and Microwave Circuit Testing.
Wireless Infrastructure RF Local Oscillator
The ADF4350ABCPZ is suited to programmable RF local-oscillator generation in wireless infrastructure because its integrated VCO covers 2200 MHz to 4400 MHz and its output dividers extend operation down to 137.5 MHz. The synthesizer can therefore serve radio designs operating near cellular, microwave, or other allocated RF bands without requiring a separate VCO. Fractional-N operation provides fine frequency increments, while integer-N operation remains available for designs that prefer integer channel spacing. In a practical implementation, the device sits between a stable reference and the RF signal chain, with the external loop filter determining loop dynamics and spectral performance. Pin- and software-controlled RF muting can support isolation, calibration, and production-test sequences, although register compatibility and the final reference and filter implementation must be validated for each band.
推薦
Microwave Signal Generator
A microwave signal generator can use the ADF4350ABCPZ as its programmable RF source because the device combines a PLL, integrated wideband VCO, programmable frequency divider, and RF output stage in one package. Its 4.4 GHz maximum stated RF output supports instrumentation for microwave component test, antenna measurement, and communications-system alignment. The 137.5 MHz lower limit extends utility to lower RF test points without replacing the VCO. In operation, a reference oscillator supplies a stable frequency, the external loop filter controls phase and frequency acquisition, and an output network provides impedance matching. Designers should verify allowable output power, harmonic content, spur performance, and reference requirements from the data sheet before assigning the source to a particular measurement class, because those results are system-dependent.
推薦
Frequency-Agile Test Equipment
The ADF4350ABCPZ supports frequency-agile laboratory and production test equipment by combining a 2200 MHz to 4400 MHz VCO with programmable divide-by-1/2/4/8/16 outputs. This allows one RF synthesizer platform to address multiple test frequencies from 137.5 MHz to 4400 MHz. Fractional-N operation is useful when the test system requires finely spaced channel positions, while integer-N operation can simplify channel planning. During a sweep, software programming changes the synthesis configuration and the output-mute functions can suppress RF during settling or measurement transitions. The external loop filter and reference remain central to sweep speed and phase-noise performance, so automated test designs should characterize lock behavior and spurious responses across their actual reference frequency and operating bandwidth.
推薦
Radio Equipment Frequency Synthesizer
The ADF4350ABCPZ fits radio equipment requiring an agile, programmable RF source because it supports fractional-N and integer-N synthesis over a broad RF range. The integrated VCO eliminates the need for an external resonator in designs that operate from 2200 MHz through 4400 MHz, while selectable division expands the usable range to 137.5 MHz. Its RF output can be muted by hardware or software, which is useful for transmit/receive isolation and controlled test intervals. A production implementation must use an approved external reference, calculate the loop filter for the required lock bandwidth, and verify output matching and filtering. Exact register configuration, output level, and spectral limits should be established from the manufacturer's data sheet and application guidance rather than inferred solely from the frequency range.
推薦
Frequency Hopping Communication System
The ADF4350ABCPZ can support frequency-hopping communication systems by reprogramming the fractional-N or integer-N synthesizer across its 137.5 MHz to 4400 MHz RF output range. Rapid channel changes are possible through the digital programming interface, while the integrated VCO and output divider concentrate frequency generation into a single package. For hopping systems, the external reference and loop filter determine settling behavior, and the RF output-mute function can coordinate channel transitions with receiver or transmit-chain timing. Designers should evaluate lock time, reference phase noise, channel spacing, and unwanted spurs for the intended hopping sequence. The ADF4351BCPZ may be considered when operation below the ADF4350's 137.5 MHz limit is needed, but its additional range and performance differences require an intentional design review rather than an unqualified substitution.
推薦
RF Power and Microwave Circuit Testing
The ADF4350ABCPZ is useful as a controllable stimulus source for RF power and microwave circuit testing because its programmable output division permits a single device to cover widely separated test frequencies. A bench or automated test receiver can use the synthesizer output as the LO for mixers, detectors, amplifiers, and frequency-conversion blocks. The 2.2 GHz to 4.4 GHz integrated-VCO range covers the upper microwave portion of the ADF4350 family, while divided outputs address lower RF test points. Output muting provides a practical means to control signal presence during path calibration. Engineers should include appropriate attenuation and matching in the external RF path, verify that the programmed divider does not compromise unwanted-signal requirements, and assess phase noise and lock performance against the measurement bandwidth.
推薦
推薦產品摘要
工程參考資料,適用於 ADF4350ABCPZ — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | ADF4350BCPZ | ADF4351BCPZ | ADF4351ABCPZ |
|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 32-lead WFQFN with exposed pad | 32-lead WFQFN with exposed pad | 32-lead WFQFN with exposed pad | 32-lead WFQFN with exposed pad |
| Minimum RF Output Frequency | 137.5 MHz | 137.5 MHz | 35 MHz | 35 MHz |
| Maximum RF Output Frequency | 4400 MHz | 4400 MHz | 4400 MHz | 4400 MHz |
主要差異化特點
- Direct same-family ordering alternative (對比ADF4350BCPZ)
- Broader low-frequency reach (對比ADF4351BCPZ)
- Exact electrical family with alternate ordering code (對比ADF4350ABCPZ-RL7)
設計說明
Keep the reference input, loop filter, RF output path, and decoupling network compact and separated from noisy switching nodes. Place the external loop-filter components close to their assigned pins and use the shortest practical ground return. The exposed pad should use the manufacturer's thermal-via arrangement and connect to the ground plane, while preserving controlled RF return paths around the package.
Do not assume that any device with a 32-lead WFQFN outline is interchangeable. The ADF4351 extends to 35 MHz and changes performance and behavior relative to the ADF4350, while suffix and reel codes affect ordering rather than electrical design. Confirm the exact pin mapping, register compatibility, frequency-divider assumptions, reference requirements, and approved-part status before treating a candidate as a drop-in replacement.
Validate reference phase noise, loop bandwidth, output filtering, and matching across the intended operating band. The external loop filter is not merely a stability component: its values and charge-pump settings influence lock behavior, spurs, and phase noise. Measure the assembled design across maximum and minimum channels, temperature corners, and supply conditions instead of relying only on nominal simulation results.
Use the exposed pad as a deliberate thermal and RF-ground structure. Apply the manufacturer's recommended via pattern, maintain uninterrupted ground-plane area beneath the package, and minimize thermal discontinuities in the board stack-up. Confirm junction-temperature and RF performance with the final enclosure, airflow, copper area, and adjacent heat sources because a laboratory board may not represent the completed system's thermal environment.
合規資訊
The exact environmental and qualification statements for ADF4350ABCPZ were not stated in the available manufacturer-page or distributor excerpts. Use the current Analog Devices product documentation and declaration for production qualification.