Analog Devices

ADF4360-1BCPRL - 2.25GHz Integer-N VCO | Analog Devices

MPN: ADF4360-1BCPRL ✗ End of Life
3.6 V Vdss 24-lead LFCSP/WFQFN exposed-pad, 4 mm x 4 mm Package 2250 MHz Speed
MOQ: 1 |

ADF4360-1BCPRL Overview

The Analog Devices ADF4360-1BCPRL is an integrated integer-N frequency synthesizer and voltage-controlled oscillator designed for a 2250 MHz center frequency, with a 65 MHz to 400 MHz output range and a divide-by-2 option producing 1025 MHz to 1225 MHz. The device is housed in a 24-lead LFCSP/WFQFN exposed-pad package and operates from a 3.6 V supply with 1.8 V logic compatibility.

An integer-N frequency synthesizer generates an output frequency by phase-locking an internal voltage-controlled oscillator to a stable reference. This ADF4360-1 family integrates the VCO, phase-locked loop, programmable output power, and fanout functions into one RF component, reducing the number of external RF assemblies required in wireless transmitter and receiver designs. The divide-by-2 output path provides an additional frequency range without requiring a separate RF divider.

Key features include an RF output range of 65 MHz to 400 MHz, a 3.6 V power supply, 1.8 V-compatible logic, programmable output power, a three-wire serial interface, digital lock detection, and hardware and software power-down modes. The integrated structure supports controlled RF output and system power management while preserving a compact 4 mm by 4 mm package footprint.

The synthesizer uses an integer-N architecture to generate an RF output from a reference frequency. A three-wire serial interface programs the frequency and operating parameters, while digital lock detection provides a status indication for supervisory logic. The exposed thermal pad under the 24-lead package improves heat transfer, but the design must maintain adequate copper area and thermal flow to avoid excessive junction temperature.

Typical applications include cellular and RF baseband equipment, wireless local-area network transmitters, test and measurement instruments, and other RF signal-chain systems requiring programmable frequency generation. Its integrated VCO is especially useful where component count, PCB area, and repeatability of the RF output path are important design priorities.

The main design consideration is power delivery and layout quality. Place the decoupling capacitor at the supply pins, follow the reference and loop-filter connection guidance in the manufacturer datasheet, and use a continuous ground reference beneath the exposed pad. Validate lock behavior, unwanted-signal levels, and thermal performance across the intended reference and output-frequency ranges.

This product record combines the manufacturer’s device information with practical interface, thermal, and replacement guidance. It also distinguishes confirmed package-compatible options from variants that differ in frequency band or production status, helping designers evaluate board reuse without treating every related synthesizer as an equivalent drop-in part.

Drop-in alternatives for ADF4360-1BCPRL — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

ADF4360-1BCPZ

✅ Drop-In
Analog Devices
📦 24-WFQFN Exposed Pad
Integrated integer-N frequency synthesizer and VCO · 2050 MHz to 2450 MHz · 2450 MHz · 1025 MHz to 1225 MHz · 3.0 V to 3.6 V · 1.8 V · 10 MHz to 250 MHz

Contact for price

View Datasheet →

ADF4360-1BCPRL7

✅ Drop-In
📦 24-WFQFN Exposed Pad
Same 2250 MHz center-frequency architecture and 24-WFQFN exposed-pad layout; production or reel-code attribute differs while the documented RF frequency limits remain unchanged.

📋 Reference alternative (not in catalog)

ADF4360-1BCP

✅ Drop-In
Analog Devices
📦 24-WFQFN Exposed Pad
2250 MHz · 1025 MHz to 1225 MHz · 2450 MHz · 10 MHz to 250 MHz · 3.6 V · 1.8 V · Integer-N · Divide-by-2

Contact for price

View Datasheet →

ADF4360-1BCPRL Specifications

Device Type Integrated integer-N frequency synthesizer and voltage-controlled oscillator
Designed Center Frequency 2250 MHz
RF Output Frequency Range 65 MHz to 400 MHz
Divide-by-2 Output Frequency Range 1025 MHz to 1225 MHz
Maximum RF Output Frequency 2450 MHz
Supply Voltage 3.6 V
Logic Compatibility 1.8 V
Synthesizer Architecture Integer-N
Output Power Programmable
Serial Interface 3-wire serial interface
Lock Detection Digital lock detect
Power-Down Modes Hardware and software power-down
Package 24-lead LFCSP/WFQFN exposed-pad, 4 mm x 4 mm
Mounting Type Surface mount
Product Status Obsolete

ADF4360-1BCPRL 24-lead lfcsp/wfqfn exposed-pad, 4 mm x 4 mm Pin Configuration Guide

Pin configuration for ADF4360-1BCPRL (24-lead lfcsp/wfqfn exposed-pad, 4 mm x 4 mm package). Pin numbering, functions, and connection diagrams are defined in the manufacturer datasheet. Refer to it for the exact footprint and soldering guidelines.

24-lead lfcsp/wfqfn exposed-pad, 4 mm x 4 mm package pinout diagram for ADF4360-1BCPRL

No detailed pinout data available for ADF4360-1BCPRL.

Refer to the datasheet for full pin configuration.

Typical Applications

ADF4360-1BCPRL is suitable for 6 applications: Cellular RF Baseband Equipment, Wireless Local-Area Network Transmitters, RF Test and Measurement Instruments, RF Signal-Chene RF Signal-Chain Modules, Frequency-Selective RF Conversion, Industrial RF Control Systems.

🌐

Cellular RF Baseband Equipment

The ADF4360-1BCPRL can provide a programmable local oscillator for cellular baseband and RF transceiver equipment operating within its 65 MHz to 400 MHz fundamental range. Its integrated integer-N synthesizer and VCO reduce the number of separate RF frequency-generation blocks, while the 3-wire interface allows a microcontroller or serial transceiver to configure the divider and output settings. The 2450 MHz maximum RF output also supports designs using the 1025 MHz to 1225 MHz divide-by-2 range. Engineers should qualify the loop filter, reference phase noise, output power, and regulatory limits for the exact target channel.

📶

Wireless Local-Area Network Transmitters

The ADF4360-1BCPRL is suitable as an integrated RF signal generator in wireless local-area network transmitters that require a programmable frequency source near the RF signal chain. Its 2250 MHz center-frequency design, integrated VCO, programmable output power, and digital lock indication simplify board partitioning around the 24-lead 4 mm by 4 mm exposed-pad package. The 65 MHz to 400 MHz output band can support low-band RF stages, while the divide-by-2 output covers 1025 MHz to 1225 MHz. Final acceptance should include conducted output power, adjacent-channel performance, lock time, and phase-noise measurements.

🖥️

RF Test and Measurement Instruments

The ADF4360-1BCPRL can serve as a programmable RF source within test and measurement instruments that require repeatable frequency generation over a defined band. Its integer-N architecture is controlled through a three-wire serial interface, allowing automated equipment to select operating conditions and monitor PLL lock through the digital lock-detect signal. Programmable output power supports level adjustment at the instrument input, while the compact exposed-pad package preserves board area. Instrument designers should characterize reference spurs, phase noise, output accuracy, and settling time, and should include appropriate filtering and attenuation outside the synthesizer output.

🔧

RF Signal-Chene RF Signal-Chain Modules

The ADF4360-1BCPRL fits modular RF signal-chain equipment requiring an on-board local oscillator rather than an external receiver reference. Integrating the integer-N PLL and VCO in a 24-lead 4 mm by 4 mm package allows the frequency-generation block to sit close to downstream mixer or conversion circuitry, which can reduce interconnect loss and simplify assembly. The 65 MHz to 400 MHz fundamental range and 1025 MHz to 1225 MHz divide-by-2 option cover distinct RF plan choices. Layout must provide a continuous ground reference and controlled return path to minimize conversion into undesired modulation or spurious products.

📡

Frequency-Selective RF Conversion

The ADF4360-1BCPRL can generate the local-oscillator signal used by RF conversion stages requiring programmable tuning within the supported frequency ranges. Its digital lock detect allows the host controller to qualify a valid locked state before enabling downstream measurement or transmission circuitry. The integrated VCO and divider architecture can reduce external RF parts compared with discrete oscillator-plus-divider designs. Designers should select the appropriate fundamental or divided output, verify the required harmonic relationship, and place output filtering close enough to the receiving RF stage to preserve wanted-signal amplitude.

🏭

Industrial RF Control Systems

The ADF4360-1BCPRL is appropriate for industrial RF control systems that synthesize a deterministic carrier for sensing, identification, or communication. The three-wire serial interface enables configuration by an embedded controller, and digital lock detection provides a hardware status signal for supervision. Its programmable output power permits downstream gain staging to be adjusted, while the integrated synthesizer supports a compact implementation. Industrial environments also require careful attention to supply robustness, temperature performance, reference stability, and EMC; use the manufacturer’s grounding and filtering recommendations around the RF output and exposed thermal pad.

What is the ADF4360-1BCPRL?
The ADF4360-1BCPRL is an Analog Devices integrated integer-N frequency synthesizer and voltage-controlled oscillator designed for a 2250 MHz center frequency. It provides a 65 MHz to 400 MHz fundamental output range and a divide-by-2 output from 1025 MHz to 1225 MHz. According to the manufacturer datasheet, the device includes programmable output power, a three-wire serial interface, digital lock detection, and hardware and software power-down functions.
What output frequency range does the ADF4360-1BCPRL support?
The ADF4360-1BCPRL supports a 65 MHz to 400 MHz RF output in its fundamental range, while the divide-by-2 path provides 1025 MHz to 1225 MHz. The manufacturer product page identifies 2250 MHz as the designed center frequency, and the manufacturer datasheet lists a maximum RF output frequency of 2450 MHz. These figures describe the synthesizer’s operating capability rather than the guaranteed tuning resolution of every individual system.
What is the power supply requirement for the ADF4360-1BCPRL?
The ADF4360-1BCPRL operates from a 3.6 V power supply and supports 1.8 V-compatible logic. According to the manufacturer datasheet, the three-wire serial programming interface and lock-detection signal are compatible with low-voltage control systems. The supply and input pins still require local high-frequency decoupling, while the exposed package pad should be connected to ground according to the manufacturer’s land-pattern guidance.
Where can I download the ADF4360-1BCPRL datasheet PDF?
The official ADF4360-1 product page at Analog Devices provides access to the manufacturer datasheet and supporting documentation. The document identifies the ADF4360-1BCPRL ordering code and describes the synthesizer architecture, electrical characteristics, register interface, pin descriptions, and application information. Use the Analog Devices product page rather than third-party copies to ensure that revision and supporting documents correspond to the official release.
Where can I find the ADF4360-1BCPRL pinout?
The ADF4360-1BCPRL pinout is documented in the pin-description section and package drawing of the manufacturer datasheet. The device uses a 24-lead 4 mm by 4 mm LFCSP/WFQFN exposed-pad package. When assigning PCB tracks, use the pin-description table for electrical functions and the recommended land pattern for geometry, including the exposed thermal and ground pad.
How do I program the ADF4360-1BCPRL?
The ADF4360-1BCPRL is programmed through its three-wire serial interface. The manufacturer datasheet identifies the serial clock, serial data, and latch enable functions used to transfer register settings. A controller should observe the documented input levels, setup timing, and register programming sequence. After programming, the digital lock-detect output can indicate PLL lock state to supervisory circuitry.
What are the key specifications of the ADF4360-1BCPRL?
The ADF4360-1BCPRL is a 2250 MHz-center-frequency integer-N synthesizer with a 65 MHz to 400 MHz output range, 2450 MHz maximum RF output, and a 1025 MHz to 1225 MHz divide-by-2 range. Other documented characteristics include a 3.6 V supply, 1.8 V logic compatibility, programmable output power, digital lock detection, and a 24-lead 4 mm by 4 mm exposed-pad package.
What can replace the ADF4360-1BCPRL?
The closest confirmed board-compatible choices are the ADF4360-1BCPZ and ADF4360-1BCPRL7 ordering variants, both associated with the same 24-WFQFN exposed-pad device family and the same 2250 MHz center-frequency architecture. These are ordering variants rather than broad functional substitutes. A different ADF4360 frequency-band variant should not be assumed to be drop-in compatible without verifying its RF range, register map, and application requirements.
What is the best Analog Devices equivalent for the ADF4360-1BCPRL?
The best Analog Devices options identified for the ADF4360-1BCPRL are the ADF4360-1BCPZ and ADF4360-1BCPRL7, which preserve the ADF4360-1 device identity and 24-WFQFN exposed-pad format. Their most relevant ordering attributes are lead finish or reel packaging. Confirm the required procurement suffix and current lifecycle status before treating either variant as an exact production replacement.
Is the ADF4360-1BCPRL suitable for wireless transmitter designs?
The ADF4360-1BCPRL is suitable for RF systems requiring programmable local oscillator generation within its 65 MHz to 400 MHz fundamental range or 1025 MHz to 1225 MHz divide-by-2 range. Its integrated VCO and integer-N PLL can simplify RF signal-chain construction. Suitability still depends on required channel spacing, tuning granularity, reference quality, phase-noise limits, output power, and regulatory constraints for the intended wireless band.
ADF4360-1BCPRL vs ADF4360-1BCPZ: which should I choose?
Both parts identify the same ADF4360-1 synthesizer in the 24-WFQFN exposed-pad package, with a 2250 MHz designed center frequency and 2450 MHz maximum RF output. Their visible ordering difference concerns the package or terminal finish rather than a different RF band. Choose according to the required ordering code, production status, assembly packaging, and availability rather than expecting different electrical performance.
When should I choose the ADF4360-1BCPRL over a different frequency-band ADF4360 variant?
Choose the ADF4360-1BCPRL when the design specifically needs its 2250 MHz-center-frequency architecture and associated 65 MHz to 400 MHz fundamental range. Other ADF4360 variants cover different frequency bands and may require different VCO calibration, register programming, or output filtering. Selection should therefore begin with the required RF frequency range and only then consider pin-compatible ordering options.
What layout considerations apply to the ADF4360-1BCPRL?
The ADF4360-1BCPRL should be placed with a continuous ground plane and adequate exposed-pad thermal coupling beneath the 24-lead package. Follow the manufacturer’s recommended land pattern, place supply-decoupling components close to their intended pins, and keep the reference and loop-filter routing compact. Controlled RF return paths and a quiet supply plane are important because package inductance and ground discontinuities can affect phase noise and output stability.
How should thermal performance be evaluated for the ADF4360-1BCPRL?
Thermal evaluation should begin with actual supply voltage, output power, operating frequency, ambient temperature, and PCB copper area because the manufacturer datasheet does not establish a universal junction-temperature result for one operating point. The exposed pad is a principal heat-transfer path, so place thermal vias and copper where permitted by the land pattern. Confirm that the final board maintains acceptable junction temperature across worst-case operating conditions.
Where can I buy the ADF4360-1BCPRL and what is its lead time?
Use the Request a Quote form on this page to request the ADF4360-1BCPRL, current availability, minimum order quantity, and production lead time. The device is identified as obsolete in comparison information, so traceability, condition, remaining-lifecycle status, and any authorized source should be confirmed before committing it to a new design. The platform will provide the current commercial response for this exact ordering code.

Engineering reference data for ADF4360-1BCPRL — comparison, design guidance, and compliance information.

Selection Guide

Choose the ADF4360-1BCPRL when a design requires the ADF4360-1 architecture, a 2250 MHz designed center frequency, and operation across the 65 MHz to 400 MHz fundamental range or 1025 MHz to 1225 MHz divide-by-2 range. The ADF4360-1BCPZ, ADF4360-1BCPRL7, and ADF4360-1BCP are the closest ordering variants identified for the same 24-WFQFN exposed-pad device, making them practical options when their ordering and lifecycle attributes fit the production plan. Choose based on procurement condition, terminal or reel configuration, and qualification rather than expecting different RF performance. Do not choose another ADF4360 frequency-band variant solely for package similarity: a changed RF band can alter tuning range, register requirements, calibration, filtering, and application suitability.

Comparison with Alternatives

Parameter This Product ADF4360-1BCPZ ADF4360-1BCPRL7 ADF4360-1BCP
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Package 24-WFQFN Exposed Pad, 4 mm x 4 mm 24-WFQFN Exposed Pad 24-WFQFN Exposed Pad 24-WFQFN Exposed Pad
Device Architecture Integer-N synthesizer with integrated VCO Integer-N synthesizer with integrated VCO Integer-N synthesizer with integrated VCO Integer-N synthesizer with integrated VCO
Designed Center Frequency 2250 MHz 2250 MHz 2250 MHz 2250 MHz
Maximum RF Output Frequency 2450 MHz 2450 MHz 2450 MHz 2450 MHz
Fundamental Output Range 65 MHz to 400 MHz 65 MHz to 400 MHz 65 MHz to 400 MHz 65 MHz to 400 MHz
Divide-by-2 Output Range 1025 MHz to 1225 MHz 1025 MHz to 1225 MHz 1025 MHz to 1225 MHz 1025 MHz to 1225 MHz
Supply Voltage 3.6 V 3.6 V 3.6 V 3.6 V
Logic Compatibility 1.8 V 1.8 V 1.8 V 1.8 V
Programming Interface 3-wire serial interface 3-wire serial interface 3-wire serial interface 3-wire serial interface
Lock Detection Digital lock detect Digital lock detect Digital lock detect Digital lock detect
Power-Down Functions Hardware and software power-down Hardware and software power-down Hardware and software power-down Hardware and software power-down

Key Differentiators

  • Preserves the complete ADF4360-1 RF identity (vs ADF4360-1BCPZ)
  • Maintains the same 24-WFQFN exposed-pad footprint (vs ADF4360-1BCPRL7)
  • Retains integrated synthesizer and VCO functionality (vs ADF4360-1BCP)

Design Notes

Use the manufacturer’s 24-lead exposed-pad land pattern and maintain a continuous ground plane beneath the device. The exposed pad is both a ground connection and a thermal path, so its thermal-via pattern should follow the package guidance. Place supply-decoupling components close to the supply pins, and route the reference and loop-filter networks for short returns and minimal coupling to the RF output.

Evaluate heat dissipation from the actual operating point using the selected supply voltage, output power, ambient temperature, and PCB copper area. The exposed pad reduces junction-to-board thermal resistance only when the PCB can transfer heat effectively. Avoid isolated pad geometry beneath the component, provide thermal vias where permitted, and verify the final assembly at the highest expected output-power condition rather than relying on package size alone.

Do not confuse a related ADF4360 frequency-band variant with a drop-in equivalent. The ADF4360-4BCP and ADF4360-6BCP families use different RF operating ranges, so their output availability and programming requirements may differ even when their packages are related. Confirm the exact center frequency, output range, register behavior, reference requirements, and lifecycle status before substituting a different band variant into an existing ADF4360-1 design.

Keep the reference path and loop filter physically compact and separated from the RF output route. A stable reference and clean return path reduce unwanted modulation and phase-noise degradation. Use controlled-impedance routing where applicable, terminate unused digital inputs according to the manufacturer guidance, and observe the required serial-interface timing. Validate lock detect under the full reference and temperature range instead of assuming successful register writes guarantee a valid locked output.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The device is an RF clock and frequency-synthesizer IC, so automotive qualification is not indicated by the available information. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not established and remain unknown.

Data verified on: 2026-11-15 — data verified and curated by XAIPART's component engineering team

Related Searches

adf4360 1bcpz adf4360 7bcpz adf4360 7bcpzrl7 ADF4360-1BCPRL datasheet ADF4360-1BCPRL datasheet pdf ADF4360-1BCPRL pinout ADF4360-1BCPRL specifications ADF4360-1BCPRL equivalent ADF4360-1BCPRL replacement ADF4360-1BCPRL footprint ADF4360-1BCPRL price ADF4360-1BCPRL stock Analog Devices ADF4360-1BCPRL ADF4360-1BCPRL RF synthesizer application ADF4360-1BCPRL vs ADF4360-1BCPZ

Related Components & Terms

Analog Devices ADF4360-1BCPRL ADF4360-1BCPZ ADF4360-1BCPRL7 ADF4360-1BCP integer-N frequency synthesizer voltage-controlled oscillator VCO phase-locked loop PLL frequency divider 24-WFQFN exposed-pad package LFCSP-24 surface-mount semiconductor three-wire serial interface digital lock detect programmable output power 2250 MHz center frequency 65 MHz to 400 MHz output 1025 MHz to 1225 MHz divided output 3.6 V supply 1.8 V logic compatibility cellular baseband RF test and measurement
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details