ADF4360-1BCPRL - 2.25GHz Integer-N VCO | Analog Devices
MPN: ADF4360-1BCPRL ✗ Akhir HayatADF4360-1BCPRL Ringkasan
An integer-N frequency synthesizer generates an output frequency by phase-locking an internal voltage-controlled oscillator to a stable reference. This ADF4360-1 family integrates the VCO, phase-locked loop, programmable output power, and fanout functions into one RF component, reducing the number of external RF assemblies required in wireless transmitter and receiver designs. The divide-by-2 output path provides an additional frequency range without requiring a separate RF divider.
Key features include an RF output range of 65 MHz to 400 MHz, a 3.6 V power supply, 1.8 V-compatible logic, programmable output power, a three-wire serial interface, digital lock detection, and hardware and software power-down modes. The integrated structure supports controlled RF output and system power management while preserving a compact 4 mm by 4 mm package footprint.
The synthesizer uses an integer-N architecture to generate an RF output from a reference frequency. A three-wire serial interface programs the frequency and operating parameters, while digital lock detection provides a status indication for supervisory logic. The exposed thermal pad under the 24-lead package improves heat transfer, but the design must maintain adequate copper area and thermal flow to avoid excessive junction temperature.
Typical applications include cellular and RF baseband equipment, wireless local-area network transmitters, test and measurement instruments, and other RF signal-chain systems requiring programmable frequency generation. Its integrated VCO is especially useful where component count, PCB area, and repeatability of the RF output path are important design priorities.
The main design consideration is power delivery and layout quality. Place the decoupling capacitor at the supply pins, follow the reference and loop-filter connection guidance in the manufacturer datasheet, and use a continuous ground reference beneath the exposed pad. Validate lock behavior, unwanted-signal levels, and thermal performance across the intended reference and output-frequency ranges.
This product record combines the manufacturer’s device information with practical interface, thermal, and replacement guidance. It also distinguishes confirmed package-compatible options from variants that differ in frequency band or production status, helping designers evaluate board reuse without treating every related synthesizer as an equivalent drop-in part.
Pilihan pengganti yang segera untuk ADF4360-1BCPRL — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
ADF4360-1BCPZ
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →ADF4360-1BCPRL7
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
ADF4360-1BCP
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →ADF4360-1BCPRL Spesifikasi
| Device Type | Integrated integer-N frequency synthesizer and voltage-controlled oscillator |
| Designed Center Frequency | 2250 MHz |
| RF Output Frequency Range | 65 MHz to 400 MHz |
| Divide-by-2 Output Frequency Range | 1025 MHz to 1225 MHz |
| Maximum RF Output Frequency | 2450 MHz |
| Tegangan Pemberi Arus | 3.6 V |
| Logic Compatibility | 1.8 V |
| Synthesizer Architecture | Integer-N |
| Output Power | Programmable |
| Serial Interface | 3-wire serial interface |
| Lock Detection | Digital lock detect |
| Power-Down Modes | Hardware and software power-down |
| Kemasan | 24-lead LFCSP/WFQFN exposed-pad, 4 mm x 4 mm |
| Jenis Pemasangan | Surface mount |
| Product Status | Obsolete |
Panduan Konfigurasi Pin ADF4360-1BCPRL 24-lead lfcsp/wfqfn exposed-pad, 4 mm x 4 mm
Konfigurasi pin untuk ADF4360-1BCPRL (24-lead lfcsp/wfqfn exposed-pad, 4 mm x 4 mm pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.
Tiada data garisan pin yang diperoleh untuk ADF4360-1BCPRL.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
ADF4360-1BCPRL patut untuk 6 aplikasis: Cellular RF Baseband Equipment, Wireless Local-Area Network Transmitters, RF Test and Measurement Instruments, RF Signal-Chene RF Signal-Chain Modules, Frequency-Selective RF Conversion, Industrial RF Control Systems.
Cellular RF Baseband Equipment
The ADF4360-1BCPRL can provide a programmable local oscillator for cellular baseband and RF transceiver equipment operating within its 65 MHz to 400 MHz fundamental range. Its integrated integer-N synthesizer and VCO reduce the number of separate RF frequency-generation blocks, while the 3-wire interface allows a microcontroller or serial transceiver to configure the divider and output settings. The 2450 MHz maximum RF output also supports designs using the 1025 MHz to 1225 MHz divide-by-2 range. Engineers should qualify the loop filter, reference phase noise, output power, and regulatory limits for the exact target channel.
Disebarkan
Wireless Local-Area Network Transmitters
The ADF4360-1BCPRL is suitable as an integrated RF signal generator in wireless local-area network transmitters that require a programmable frequency source near the RF signal chain. Its 2250 MHz center-frequency design, integrated VCO, programmable output power, and digital lock indication simplify board partitioning around the 24-lead 4 mm by 4 mm exposed-pad package. The 65 MHz to 400 MHz output band can support low-band RF stages, while the divide-by-2 output covers 1025 MHz to 1225 MHz. Final acceptance should include conducted output power, adjacent-channel performance, lock time, and phase-noise measurements.
Disebarkan
RF Test and Measurement Instruments
The ADF4360-1BCPRL can serve as a programmable RF source within test and measurement instruments that require repeatable frequency generation over a defined band. Its integer-N architecture is controlled through a three-wire serial interface, allowing automated equipment to select operating conditions and monitor PLL lock through the digital lock-detect signal. Programmable output power supports level adjustment at the instrument input, while the compact exposed-pad package preserves board area. Instrument designers should characterize reference spurs, phase noise, output accuracy, and settling time, and should include appropriate filtering and attenuation outside the synthesizer output.
Disebarkan
RF Signal-Chene RF Signal-Chain Modules
The ADF4360-1BCPRL fits modular RF signal-chain equipment requiring an on-board local oscillator rather than an external receiver reference. Integrating the integer-N PLL and VCO in a 24-lead 4 mm by 4 mm package allows the frequency-generation block to sit close to downstream mixer or conversion circuitry, which can reduce interconnect loss and simplify assembly. The 65 MHz to 400 MHz fundamental range and 1025 MHz to 1225 MHz divide-by-2 option cover distinct RF plan choices. Layout must provide a continuous ground reference and controlled return path to minimize conversion into undesired modulation or spurious products.
Disebarkan
Frequency-Selective RF Conversion
The ADF4360-1BCPRL can generate the local-oscillator signal used by RF conversion stages requiring programmable tuning within the supported frequency ranges. Its digital lock detect allows the host controller to qualify a valid locked state before enabling downstream measurement or transmission circuitry. The integrated VCO and divider architecture can reduce external RF parts compared with discrete oscillator-plus-divider designs. Designers should select the appropriate fundamental or divided output, verify the required harmonic relationship, and place output filtering close enough to the receiving RF stage to preserve wanted-signal amplitude.
Disebarkan
Industrial RF Control Systems
The ADF4360-1BCPRL is appropriate for industrial RF control systems that synthesize a deterministic carrier for sensing, identification, or communication. The three-wire serial interface enables configuration by an embedded controller, and digital lock detection provides a hardware status signal for supervision. Its programmable output power permits downstream gain staging to be adjusted, while the integrated synthesizer supports a compact implementation. Industrial environments also require careful attention to supply robustness, temperature performance, reference stability, and EMC; use the manufacturer’s grounding and filtering recommendations around the RF output and exposed thermal pad.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk ADF4360-1BCPRL — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | ADF4360-1BCPZ | ADF4360-1BCPRL7 | ADF4360-1BCP |
|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 24-WFQFN Exposed Pad, 4 mm x 4 mm | 24-WFQFN Exposed Pad | 24-WFQFN Exposed Pad | 24-WFQFN Exposed Pad |
| Device Architecture | Integer-N synthesizer with integrated VCO | Integer-N synthesizer with integrated VCO | Integer-N synthesizer with integrated VCO | Integer-N synthesizer with integrated VCO |
| Designed Center Frequency | 2250 MHz | 2250 MHz | 2250 MHz | 2250 MHz |
| Maximum RF Output Frequency | 2450 MHz | 2450 MHz | 2450 MHz | 2450 MHz |
| Fundamental Output Range | 65 MHz to 400 MHz | 65 MHz to 400 MHz | 65 MHz to 400 MHz | 65 MHz to 400 MHz |
| Divide-by-2 Output Range | 1025 MHz to 1225 MHz | 1025 MHz to 1225 MHz | 1025 MHz to 1225 MHz | 1025 MHz to 1225 MHz |
| Supply Voltage | 3.6 V | 3.6 V | 3.6 V | 3.6 V |
| Logic Compatibility | 1.8 V | 1.8 V | 1.8 V | 1.8 V |
| Programming Interface | 3-wire serial interface | 3-wire serial interface | 3-wire serial interface | 3-wire serial interface |
| Lock Detection | Digital lock detect | Digital lock detect | Digital lock detect | Digital lock detect |
| Power-Down Functions | Hardware and software power-down | Hardware and software power-down | Hardware and software power-down | Hardware and software power-down |
Penyeberangsung Jelas
- Preserves the complete ADF4360-1 RF identity (vsADF4360-1BCPZ)
- Maintains the same 24-WFQFN exposed-pad footprint (vsADF4360-1BCPRL7)
- Retains integrated synthesizer and VCO functionality (vsADF4360-1BCP)
Catatan Desain
Use the manufacturer’s 24-lead exposed-pad land pattern and maintain a continuous ground plane beneath the device. The exposed pad is both a ground connection and a thermal path, so its thermal-via pattern should follow the package guidance. Place supply-decoupling components close to the supply pins, and route the reference and loop-filter networks for short returns and minimal coupling to the RF output.
Evaluate heat dissipation from the actual operating point using the selected supply voltage, output power, ambient temperature, and PCB copper area. The exposed pad reduces junction-to-board thermal resistance only when the PCB can transfer heat effectively. Avoid isolated pad geometry beneath the component, provide thermal vias where permitted, and verify the final assembly at the highest expected output-power condition rather than relying on package size alone.
Do not confuse a related ADF4360 frequency-band variant with a drop-in equivalent. The ADF4360-4BCP and ADF4360-6BCP families use different RF operating ranges, so their output availability and programming requirements may differ even when their packages are related. Confirm the exact center frequency, output range, register behavior, reference requirements, and lifecycle status before substituting a different band variant into an existing ADF4360-1 design.
Keep the reference path and loop filter physically compact and separated from the RF output route. A stable reference and clean return path reduce unwanted modulation and phase-noise degradation. Use controlled-impedance routing where applicable, terminate unused digital inputs according to the manufacturer guidance, and observe the required serial-interface timing. Validate lock detect under the full reference and temperature range instead of assuming successful register writes guarantee a valid locked output.
Maklumat Kesediaan
The device is an RF clock and frequency-synthesizer IC, so automotive qualification is not indicated by the available information. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not established and remain unknown.