Analog Devices

ADM211ARSZ - 4/5 RS-232 Transceiver, 5V, 200kbps | Analog Devices

MPN: ADM211ARSZ ✓ Active
5 V Vdss 28-pin SSOP Package
MOQ: 1 |

ADM211ARSZ Overview

The Analog Devices ADM211ARSZ is a 5 V CMOS RS-232 transceiver with four drivers and five receivers, a 200 kbps data rate, and a 28-pin SSOP package. It is designed for EIA-232-E and V.28 communication interfaces that require bipolar RS-232 levels but do not have ±12 V supplies available. The device uses charge-pump technology to generate the required voltage swings from a single 5 V power source.

An RS-232 transceiver is an interface IC that combines differential line-driver and receiver functions for serial data links. It belongs to the communications-interface hierarchy, where a transceiver converts logic-level signals into RS-232 electrical levels and reconstructs logic-level data from received RS-232 signals. The ADM211 family is particularly useful when system power constraints make traditional ±12 V RS-232 implementations impractical.

The ADM211ARSZ provides four driver channels and five receiver channels, allowing several serial ports or multiple control lines to share one package. Its stated 200 kbps maximum signaling rate supports conventional RS-232 links used by instrumentation, industrial equipment, data acquisition systems, and legacy computer peripherals. The 5 V supply architecture eliminates the need for a separate ±12 V rail, reducing board area and power-supply complexity.

Its CMOS implementation integrates the charge-pump circuitry required to generate positive and negative RS-232 voltage levels from one supply. The Analog Devices ADM211 family also supports systems where ±12 V is unavailable. Because RS-232 is a point-to-point interface, designers should still account for cable length, ground offset, termination, protection, and transient conditions when laying out the interface.

Typical uses include multi-channel serial connectivity in industrial controllers, test and measurement equipment, point-of-sale terminals, printers, scanners, and embedded systems upgrading legacy RS-232 ports. The five receivers provide additional channels for handshake, status, or control signals, while the four drivers support as many as four outbound RS-232 connections when the connected devices have compatible signal assignments.

PCB implementation requires careful placement of the charge-pump capacitors and interface-protection components. Keep RS-232 driver and receiver traces away from sensitive analog or high-speed digital paths, provide a stable ground reference, and place any external surge-protection devices where they can clamp cable transients before they reach the IC. Confirm the complete pin assignment and voltage ratings in the manufacturer datasheet before routing the PCB.

This page combines the manufacturer product information, exact-MPN catalog records, interface characteristics, and replacement analysis into an engineering-focused guide. It also distinguishes true same-footprint replacements from related RS-232 devices that differ in channel count, package, or operating specifications.

Drop-in alternatives for ADM211ARSZ — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with ADM211ARSZ (same form factor and footprint) — differing in Package, Product Type, Maximum Data Rate, Operating Temperature Range, Driver Output Swing.

Maxim Integrated
Package: 28-pin SSOP (5.30 mm width)
Maximum Data Rate: 120 kbps
Operating Temperature Range: 0 °C to +70 °C
Compare with ADM211ARSZ →
Texas Instruments
Package: 28-pin SSOP, 5.30 mm width
Product Type: Multichannel RS-232 line driver/receiver
Maximum Data Rate: 120 kbit/s
Compare with ADM211ARSZ →
Texas Instruments
Package: 28-pin SSOP, 5.30 mm width
Product Type: Multichannel RS-232 line driver/receiver
Maximum Data Rate: 120 kbit/s
Compare with ADM211ARSZ →
Texas Instruments
Package: SSOP-28 (DB)
Product Type: RS-232 Line Driver/Receiver (Transceiver)
Operating Temperature Range: -40 °C to +85 °C
Compare with ADM211ARSZ →
Texas Instruments
Package: SSOP-28 (DB)
Product Type: RS-232 Line Driver/Receiver (Transceiver)
Operating Temperature Range: -40 °C to +85 °C
Compare with ADM211ARSZ →
Texas Instruments
Product Type: 5 V multichannel RS-232 line driver/receiver
Maximum Data Rate: 120 kbit/s
Operating Temperature Range: -40°C to +85°C
Compare with ADM211ARSZ →

ADM211ARS

✅ Drop-In
📦 28-pin SSOP
Same 4/5 transceiver configuration and 28-pin SSOP footprint; ordering-form differences require confirmation against the manufacturer ordering table.

📋 Reference alternative (not in catalog)

ADM211EARSZ

✅ Drop-In
📦 28-pin SSOP
Same 28-pin SSOP and reported functionally consistent interface configuration; electrical limits must be checked for any suffix-specific changes.

📋 Reference alternative (not in catalog)

MAX211CAI+

✅ Drop-In
Maxim Integrated
📦 28-pin SSOP
MAX211CAI+ · RS-232 Transceiver (4 Drivers / 5 Receivers) · 4.5 V to 5.5 V · ±5 V (EIA/TIA-232E compliant) · 4 · 5 · 120 kbps · 4 x 0.1 µF

Contact for price

View Datasheet →

ADM211ARSZ Specifications

Product Type RS-232 transceiver
Driver Channel Count 4 channels
Receiver Channel Count 5 channels
Supply Voltage 5 V
Maximum Data Rate 200 kbps
External Charge-Pump Capacitor 0.1 uF
Interface Standard EIA-232-E and V.28
Logic Technology CMOS
Package 28-pin SSOP
Package Width 5.30 mm
Mounting Type Surface mount
Pin Count 28 pins
Supply Architecture Single 5 V supply
Power-Supply Requirement No external ±12 V supply required

ADM211ARSZ 5.30 mm Pin Configuration Guide

Pin configuration for ADM211ARSZ (5.30 mm package). Pin numbering, functions, and connection diagrams are defined in the manufacturer datasheet. Refer to it for the exact footprint and soldering guidelines.

5.30 mm package pinout diagram for ADM211ARSZ

No detailed pinout data available for ADM211ARSZ.

Refer to the datasheet for full pin configuration.

Typical Applications

ADM211ARSZ is suitable for 6 applications: Industrial Serial Controllers, Test and Measurement Equipment, Point-of-Sale Terminals, Embedded Legacy Port Expansion, Data Acquisition Systems, Printer and Scanner Interfaces.

🏭

Industrial Serial Controllers

The ADM211ARSZ suits industrial controllers that must connect several legacy RS-232 devices without adding a separate ±12 V supply. Its four drivers can support outbound command, data, and status connections, while five receivers provide additional inbound control channels. A single 5 V rail simplifies the power architecture, and the 200 kbps rate is appropriate for many supervisory, configuration, and diagnostic links. Designers should still separate protected cable-side routing from sensitive logic circuitry and validate ground offsets across connected equipment.

🔧

Test and Measurement Equipment

The ADM211ARSZ provides a practical multi-channel interface for instruments and automated test systems that retain RS-232 ports. The four driver channels and five receiver channels can carry measurement commands, results, and handshake signals over separate point-to-point connections. Operation from one 5 V supply reduces the need for a bipolar supply in portable or rack-mounted equipment. The 200 kbps limit is suitable for many legacy instrument protocols, although cable length and grounding must be assessed before selecting a connection scheme.

🖥️

Point-of-Sale Terminals

Point-of-sale systems commonly use RS-232 for receipt printers, scanners, scales, and customer displays. The ADM211ARSZ can consolidate several of these connections through four driver outputs and five receiver inputs while running from a single 5 V supply. This allows a compact controller to replace several one-channel interface packages. Keep each RS-232 connection point-to-point, route away from display and processor power signals, and use transient protection at externally accessible connectors.

🧩

Embedded Legacy Port Expansion

The ADM211ARSZ can add multi-channel RS-232 connectivity to an embedded controller that lacks sufficient legacy serial ports. Because the transceiver generates its required signal levels from a 5 V supply, the host does not need separate ±12 V rails. Four transmit and five receive functions also allow handshake and status signals to be handled without duplicating driver packages. Firmware designers should map the base addresses or serial controllers carefully so that each external cable has a defined point-to-point signal path.

📡

Data Acquisition Systems

The ADM211ARSZ is suitable for data-acquisition front ends that must communicate with legacy sensors, analyzers, or laboratory controllers over RS-232. Its 200 kbps signaling rate accommodates moderate-rate command and measurement traffic, while multiple channels reduce the number of interface ICs needed on the controller card. A single 5 V supply helps preserve board-space efficiency in multi-channel acquisition systems. Maintain a low-impedance common ground between connected equipment and place cable protection at the connector boundary.

🖨️

Printer and Scanner Interfaces

The ADM211ARSZ can support printer, scanner, and terminal interfaces in industrial and commercial equipment that uses legacy serial communication. Its four driver channels permit several outbound device connections, and five receivers leave capacity for incoming control or status signals. Using one multi-channel package instead of multiple single-channel transceivers can reduce board area and simplify supply routing. Verify the device protocol and signal assignments before connection, and provide protection where cables leave the enclosure.

Recommended Products Summary

ADM211ARS Same-family 4/5 RS-232 transceiver configuration Used in: Industrial Serial Controllers, Point-of-Sale Terminals, Data Acquisition Systems, Printer and Scanner Interfaces MAX3221IPWR Texas Instruments Used in: Industrial Serial Controllers, Test and Measurement Equipment, Point-of-Sale Terminals, Data Acquisition Systems ADM211EARSZ Same-family RS-232 interface option Used in: Test and Measurement Equipment, Embedded Legacy Port Expansion MAX211CAI 4/5 transceiver in a 28-pin SSOP package Used in: Embedded Legacy Port Expansion, Printer and Scanner Interfaces
What is the ADM211ARSZ?
The ADM211ARSZ is a 5 V CMOS RS-232 transceiver containing four drivers and five receivers in a 28-pin SSOP package. According to the Analog Devices ADM211 product page, its maximum signaling rate is 200 kbps and it supports EIA-232-E and V.28 interfaces. The device is intended for RS-232 designs in which ±12 V supplies are unavailable.
Where can I download the ADM211ARSZ datasheet PDF?
The ADM211ARSZ datasheet is available from the official Analog Devices ADM211 product page at https://www.analog.com/en/products/adm211.html. The page provides the manufacturer data sheet and ordering information for the ADM211 family. Use the pin-description table and electrical-characteristics tables in that document when assigning PCB pins and verifying operating limits.
Where can I find the ADM211ARSZ pinout?
The ADM211ARSZ pinout is documented in the pin-description table of the Analog Devices ADM211 data sheet linked from the product page at https://www.analog.com/en/products/adm211.html. The device uses a 28-pin SSOP outline. Assign each driver output, receiver input, supply, ground, and charge-pump capacitor connection directly from that table rather than inferring connections from another RS-232 transceiver.
Does the ADM211ARSZ need a ±12 V supply?
No. The ADM211ARSZ operates from a single 5 V supply and uses charge-pump circuitry to generate the bipolar voltage levels required by RS-232. The Analog Devices product page specifically identifies the ADM2xx family as suitable for EIA-232-E and V.28 interfaces where ±12 V is not available. This simplifies the power tree but still requires correct external 0.1 uF capacitor placement.
How many RS-232 drivers and receivers does ADM211ARSZ have?
The ADM211ARSZ contains four RS-232 drivers and five RS-232 receivers. The driver channels support outbound data and control signals, while the additional receiver can be used for another inbound signal such as status or handshake. Analog Devices identifies the device as a 4/5 RS-232 transceiver supporting operation up to 200 kbps.
What is the maximum data rate of ADM211ARSZ?
The ADM211ARSZ supports a maximum data rate of 200 kbps. According to the Analog Devices ADM211 product page, the device is a 5 V CMOS RS-232 transceiver optimized for EIA-232-E and V.28 communication interfaces. Its single-supply charge-pump architecture avoids a separate ±12 V rail while retaining the multi-channel transceiver arrangement.
What can replace the ADM211ARSZ?
The closest documented same-footprint choices are the ADM211ARS and ADM211EARSZ, while the MAX211CAI is a cross-brand 28-SSOP option identified in comparison data. Pin compatibility must be checked against the complete ADM211 pin table, particularly charge-pump capacitor connections and channel assignments. No broad substitute should be selected solely because it is labeled RS-232 or uses a 28-pin SSOP.
Is ADM211ARSZ the same as MAX211CAI?
The MAX211CAI is a closely related 4-driver, 5-receiver RS-232 device in a 28-pin SSOP package, but it is not automatically interchangeable with the ADM211ARSZ. The comparison record identifies it as a potential replacement, while complete pin-level and electrical equivalence still require engineering review. Check supply limits, charge-pump capacitor values, enable behavior, and channel assignment before substitution.
Is ADM211ARSZ suitable for industrial equipment?
The ADM211ARSZ is suitable for RS-232 links in industrial and instrumentation equipment when the interface speed is no greater than 200 kbps and a single 5 V supply is preferred. Its four drivers and five receivers support multiple outbound and inbound signals. For harsh industrial cabling, add suitable transient protection and verify grounding and cable-routing practices.
ADM211ARSZ vs ADM211ARS — which should I choose?
Choose ADM211ARSZ for the ordering configuration represented by the target 28-SSOP part, and use ADM211ARS when its package, shipping form, and device markings fit the assembly requirement. The catalog comparison identifies both as 4/5 RS-232 transceivers in 28-pin SSOP packages. Verify the manufacturer ordering table before treating the order codes as interchangeable.
When should I choose ADM211ARSZ over a single-channel RS-232 transceiver?
Choose the ADM211ARSZ when one board interface must support several RS-232 data or control lines. Its four drivers and five receivers consolidate multiple channels into one 28-pin SSOP, while a single-channel device would require additional packages or separate interface circuitry. The ADM211ARSZ is preferable when the system also benefits from operation from a single 5 V rail without ±12 V supplies.
Where can I buy ADM211ARSZ online?
Use the Request a Quote form on this page to request ADM211ARSZ availability, current commercial terms, and production quantities. The form is the appropriate channel for an exact MPN including its package and ordering suffix. Stock and lead time can change, so confirm the current allocation directly before committing the component to a production schedule.
What is the price of ADM211ARSZ?
The current commercial price for ADM211ARSZ should be requested through the Request a Quote form on this page because order quantities, packaging, and market conditions affect the final quotation. No fixed price should be inferred from the family-level starting figure shown by the manufacturer. Submit the exact MPN ADM211ARSZ and your required quantity for a current offer.
What is the lead time for ADM211ARSZ?
The current lead time for ADM211ARSZ should be confirmed through the Request a Quote form on this page. Lead time depends on order quantity, scheduled production, package availability, and whether the required ADM211ARSZ ordering suffix is being manufactured actively. Request the quantity and target delivery date with the quotation to obtain a production-relevant commitment.
Is ADM211ARSZ in stock?
Use the Request a Quote form on this page to request the current stock status for ADM211ARSZ. Availability can vary with quantity and order timing, and a catalog listing does not guarantee a shipment allocation. Provide the required quantity, date code requirements, and delivery destination so the response reflects the intended production order.
What are the key specifications of ADM211ARSZ that engineers should know?
The ADM211ARSZ combines four RS-232 drivers and five receivers with a single 5 V supply, 200 kbps maximum operation, and a 28-pin SSOP package. The Analog Devices product page also identifies 0.1 uF charge-pump capacitors and support for EIA-232-E and V.28 links. Its primary design advantage is multi-channel RS-232 operation without a separate ±12 V power rail.

Engineering reference data for ADM211ARSZ — comparison, design guidance, and compliance information.

Selection Guide

Choose the ADM211ARSZ when a board needs several legacy RS-232 connections and operates from a single 5 V rail. Its four drivers and five receivers are useful when data and handshake signals must travel over separate point-to-point links, and its 200 kbps rate covers many industrial, instrumentation, printer, and scanner protocols. Choose ADM211ARS or ADM211EARSZ when their specific ordering and electrical definitions better match the assembly or product variant, after checking the manufacturer ordering information. Consider MAX211CAI when its Maxim Integrated sourcing or device characteristics are preferred, but review every pin and capacitor connection before substituting it. Use a single-channel transceiver such as MAX3221IPWR when only one RS-232 port is needed and board area is the dominant constraint.

Comparison with Alternatives

Parameter This Product ADM211ARS ADM211EARSZ MAX211CAI
Package 28-pin SSOP 28-pin SSOP 28-pin SSOP 28-pin SSOP
Brand Analog Devices Analog Devices Analog Devices Maxim Integrated
Interface Standard EIA-232-E and V.28 RS-232 RS-232 RS-232

Key Differentiators

  • Four drivers and five receivers in one interface package (vs MAX3221IPWR)
  • Single 5 V power architecture (vs ADM211ARS)
  • Multi-channel 200 kbps interface (vs ADM211EARSZ)

Design Notes

Place the ADM211ARSZ 0.1 uF charge-pump capacitors directly beside their associated IC pins using the shortest possible traces. Keep these high-current switching paths away from receiver inputs and sensitive analog traces. Follow the exact capacitor connections shown in the manufacturer pin table because changing a charge-pump connection can affect startup, voltage generation, and interface reliability.

Separate the cable-side RS-232 driver and receiver routes from clocks, data buses, ADC inputs, and power-converter switching nodes. Route each RS-232 connection as a point-to-point link and preserve a common signal-ground reference between communicating equipment. Where cables leave the board, place the protection network close to the connector and terminate unused inputs according to the manufacturer recommendations.

Decouple the 5 V supply locally with the capacitance and placement specified by the manufacturer datasheet. The charge-pump circuitry creates pulsed current on the supply rail, so a remote or high-impedance supply connection can degrade voltage generation. Provide adequate copper area for current flow and verify startup and regulation at both light and maximum channel loading.

Do not assume that every 28-pin RS-232 device is a drop-in replacement. Compare channel direction, charge-pump capacitor pins, shutdown or enable behavior, receiver enable polarity, and electrical limits before substituting another manufacturer. The ADM211ARS, ADM211EARSZ, and MAX211CAI have the documented SSOP-28 footprint, but complete compatibility requires a pin-by-pin datasheet review.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

No explicit compliance declarations were identified in the product-page and catalog information. The ADM211ARSZ is an interface IC and is not presented as an AEC-Q100-qualified automotive device.

Related Searches

ADM211ARSZ datasheet ADM211ARSZ pinout ADM211ARSZ datasheet pdf ADM211ARSZ equivalent ADM211ARSZ replacement ADM211ARSZ price ADM211ARSZ stock ADM211ARSZ 200kbps ADM211ARSZ SSOP-28 Analog Devices ADM211ARSZ ADM211ARSZ vs MAX211CAI ADM211ARSZ RS-232 application circuit

Related Components & Terms

Analog Devices ADM211ARSZ ADM211ARS ADM211EARSZ MAX211CAI MAX3221IPWR RS-232 EIA-232-E V.28 CMOS RS-232 transceiver RS-232 driver RS-232 receiver charge-pump voltage generator single 5 V supply 200 kbps data rate 0.1 uF capacitor 28-pin SSOP SSOP package family surface-mount package industrial control test and measurement data acquisition point-of-sale equipment printer interface scanner interface
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details