ADM211ARSZ - 4/5 RS-232 Transceiver, 5V, 200kbps | Analog Devices
部品番号: ADM211ARSZ ✓ 生産中ADM211ARSZ 概要
An RS-232 transceiver is an interface IC that combines differential line-driver and receiver functions for serial data links. It belongs to the communications-interface hierarchy, where a transceiver converts logic-level signals into RS-232 electrical levels and reconstructs logic-level data from received RS-232 signals. The ADM211 family is particularly useful when system power constraints make traditional ±12 V RS-232 implementations impractical.
The ADM211ARSZ provides four driver channels and five receiver channels, allowing several serial ports or multiple control lines to share one package. Its stated 200 kbps maximum signaling rate supports conventional RS-232 links used by instrumentation, industrial equipment, data acquisition systems, and legacy computer peripherals. The 5 V supply architecture eliminates the need for a separate ±12 V rail, reducing board area and power-supply complexity.
Its CMOS implementation integrates the charge-pump circuitry required to generate positive and negative RS-232 voltage levels from one supply. The Analog Devices ADM211 family also supports systems where ±12 V is unavailable. Because RS-232 is a point-to-point interface, designers should still account for cable length, ground offset, termination, protection, and transient conditions when laying out the interface.
Typical uses include multi-channel serial connectivity in industrial controllers, test and measurement equipment, point-of-sale terminals, printers, scanners, and embedded systems upgrading legacy RS-232 ports. The five receivers provide additional channels for handshake, status, or control signals, while the four drivers support as many as four outbound RS-232 connections when the connected devices have compatible signal assignments.
PCB implementation requires careful placement of the charge-pump capacitors and interface-protection components. Keep RS-232 driver and receiver traces away from sensitive analog or high-speed digital paths, provide a stable ground reference, and place any external surge-protection devices where they can clamp cable transients before they reach the IC. Confirm the complete pin assignment and voltage ratings in the manufacturer datasheet before routing the PCB.
This page combines the manufacturer product information, exact-MPN catalog records, interface characteristics, and replacement analysis into an engineering-focused guide. It also distinguishes true same-footprint replacements from related RS-232 devices that differ in channel count, package, or operating specifications.
ドロップイン代替品: ADM211ARSZ — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: ADM211ARSZ (同一形状・フットプリント) — 相違点: Package, Product Type, Maximum Data Rate, Operating Temperature Range, Driver Output Swing.
ADM211ARS
✅ ドロップイン📋 参考代替品(カタログ未掲載)
ADM211EARSZ
✅ ドロップイン📋 参考代替品(カタログ未掲載)
MAX211CAI+
✅ ドロップイン価格はお問い合わせください
データシートを見る →ADM211ARSZ 仕様
| Product Type | RS-232 transceiver |
| Driver Channel Count | 4 channels |
| Receiver Channel Count | 5 channels |
| 電源電圧 | 5 V |
| Maximum Data Rate | 200 kbps |
| External Charge-Pump Capacitor | 0.1 uF |
| Interface Standard | EIA-232-E and V.28 |
| Logic Technology | CMOS |
| パッケージ | 28-pin SSOP |
| Package Width | 5.30 mm |
| 実装タイプ | Surface mount |
| ピン数 | 28 pins |
| Supply Architecture | Single 5 V supply |
| Power-Supply Requirement | No external ±12 V supply required |
ADM211ARSZ 5.30 mm ピン配置ガイド
ADM211ARSZ (5.30 mm パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。
詳細なピン配置データはありません: ADM211ARSZ.
詳細は データシート をご参照ください。
主な用途
ADM211ARSZ の用途: 6 件s: Industrial Serial Controllers, Test and Measurement Equipment, Point-of-Sale Terminals, Embedded Legacy Port Expansion, Data Acquisition Systems, Printer and Scanner Interfaces.
Industrial Serial Controllers
The ADM211ARSZ suits industrial controllers that must connect several legacy RS-232 devices without adding a separate ±12 V supply. Its four drivers can support outbound command, data, and status connections, while five receivers provide additional inbound control channels. A single 5 V rail simplifies the power architecture, and the 200 kbps rate is appropriate for many supervisory, configuration, and diagnostic links. Designers should still separate protected cable-side routing from sensitive logic circuitry and validate ground offsets across connected equipment.
おすすめ
Test and Measurement Equipment
The ADM211ARSZ provides a practical multi-channel interface for instruments and automated test systems that retain RS-232 ports. The four driver channels and five receiver channels can carry measurement commands, results, and handshake signals over separate point-to-point connections. Operation from one 5 V supply reduces the need for a bipolar supply in portable or rack-mounted equipment. The 200 kbps limit is suitable for many legacy instrument protocols, although cable length and grounding must be assessed before selecting a connection scheme.
おすすめ
Point-of-Sale Terminals
Point-of-sale systems commonly use RS-232 for receipt printers, scanners, scales, and customer displays. The ADM211ARSZ can consolidate several of these connections through four driver outputs and five receiver inputs while running from a single 5 V supply. This allows a compact controller to replace several one-channel interface packages. Keep each RS-232 connection point-to-point, route away from display and processor power signals, and use transient protection at externally accessible connectors.
おすすめ
Embedded Legacy Port Expansion
The ADM211ARSZ can add multi-channel RS-232 connectivity to an embedded controller that lacks sufficient legacy serial ports. Because the transceiver generates its required signal levels from a 5 V supply, the host does not need separate ±12 V rails. Four transmit and five receive functions also allow handshake and status signals to be handled without duplicating driver packages. Firmware designers should map the base addresses or serial controllers carefully so that each external cable has a defined point-to-point signal path.
おすすめ
Data Acquisition Systems
The ADM211ARSZ is suitable for data-acquisition front ends that must communicate with legacy sensors, analyzers, or laboratory controllers over RS-232. Its 200 kbps signaling rate accommodates moderate-rate command and measurement traffic, while multiple channels reduce the number of interface ICs needed on the controller card. A single 5 V supply helps preserve board-space efficiency in multi-channel acquisition systems. Maintain a low-impedance common ground between connected equipment and place cable protection at the connector boundary.
おすすめ
Printer and Scanner Interfaces
The ADM211ARSZ can support printer, scanner, and terminal interfaces in industrial and commercial equipment that uses legacy serial communication. Its four driver channels permit several outbound device connections, and five receivers leave capacity for incoming control or status signals. Using one multi-channel package instead of multiple single-channel transceivers can reduce board area and simplify supply routing. Verify the device protocol and signal assignments before connection, and provide protection where cables leave the enclosure.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: ADM211ARSZ — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | ADM211ARS | ADM211EARSZ | MAX211CAI |
|---|---|---|---|---|
| Package | 28-pin SSOP | 28-pin SSOP | 28-pin SSOP | 28-pin SSOP |
| Brand | Analog Devices | Analog Devices | Analog Devices | Maxim Integrated |
| Interface Standard | EIA-232-E and V.28 | RS-232 | RS-232 | RS-232 |
主な差別化要因
- Four drivers and five receivers in one interface package (vs MAX3221IPWR)
- Single 5 V power architecture (vs ADM211ARS)
- Multi-channel 200 kbps interface (vs ADM211EARSZ)
設計ノート
Place the ADM211ARSZ 0.1 uF charge-pump capacitors directly beside their associated IC pins using the shortest possible traces. Keep these high-current switching paths away from receiver inputs and sensitive analog traces. Follow the exact capacitor connections shown in the manufacturer pin table because changing a charge-pump connection can affect startup, voltage generation, and interface reliability.
Separate the cable-side RS-232 driver and receiver routes from clocks, data buses, ADC inputs, and power-converter switching nodes. Route each RS-232 connection as a point-to-point link and preserve a common signal-ground reference between communicating equipment. Where cables leave the board, place the protection network close to the connector and terminate unused inputs according to the manufacturer recommendations.
Decouple the 5 V supply locally with the capacitance and placement specified by the manufacturer datasheet. The charge-pump circuitry creates pulsed current on the supply rail, so a remote or high-impedance supply connection can degrade voltage generation. Provide adequate copper area for current flow and verify startup and regulation at both light and maximum channel loading.
Do not assume that every 28-pin RS-232 device is a drop-in replacement. Compare channel direction, charge-pump capacitor pins, shutdown or enable behavior, receiver enable polarity, and electrical limits before substituting another manufacturer. The ADM211ARS, ADM211EARSZ, and MAX211CAI have the documented SSOP-28 footprint, but complete compatibility requires a pin-by-pin datasheet review.
コンプライアンス情報
No explicit compliance declarations were identified in the product-page and catalog information. The ADM211ARSZ is an interface IC and is not presented as an AEC-Q100-qualified automotive device.