ADM3061EBRMZ-RL7 - 500kbps RS-485 Transceiver | Analog Devices
MPN: ADM3061EBRMZ-RL7 ✓ Active| Qty | Unit Price | Extended |
|---|---|---|
| 1 | $2.45 | $2.45 |
| 10 | $2.2 | $22.00 |
| 100 | $1.85 | $185.00 |
| 500 | $1.6 | $800.00 |
| 1,000 | $1.45 | $1,450.00 |
Drop-in alternatives for ADM3061EBRMZ-RL7 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Quick Comparison Tool — Select alternative parts for side-by-side comparison:
ADM3061EBRMZ-R7
✅ Drop-In📋 Reference alternative (not in catalog)
ADM3061EBRMZ-RL7 Maximum Ratings & Electrical Characteristics
| Type | Transceiver |
| Protocol | RS-485 |
| Number of Drivers/Receivers | 1/1 |
| Duplex | Half |
| Receiver Hysteresis | 30 mV |
| Data Rate | 500 kbps |
| Supply Voltage | 3 V to 5.5 V |
| Operating Temperature | -40°C to +125°C |
| Mounting Type | Surface Mount |
| Package / Case | 8-MSOP |
| ESD Protection | ±12 kV IEC (A and B pins) |
| Fail-Safe | Open, short, idle |
| Thermal Shutdown | Yes |
| RoHS Status | Compliant |
| Packaging | Tape & Reel (RL7) |
ADM3061EBRMZ-RL7 Pin Configuration
| Pin 1 | RO — Receiver output |
| Pin 2 | RE — Receiver enable (active low) |
| Pin 3 | DE — Driver enable (active high) |
| Pin 4 | DI — Driver input |
| Pin 5 | GND — Ground |
| Pin 6 | A — Non-inverting bus pin |
| Pin 7 | B — Inverting bus pin |
| Pin 8 | VCC — Power supply |
Safe Operating Area (SOA) & Thermal Characteristics
No official SOA curve available for this digital IC. Always operate within absolute maximum ratings specified in the datasheet. Ensure adequate cooling and derate as needed.
Typical Applications
ADM3061EBRMZ-RL7 is suitable for 6 applications: Industrial Control Systems, Building Automation, Remote Sensor Networks, HVAC Controllers, Instrumentation, Security Systems.
Industrial Control Systems
The ADM3061EBRMZ-RL7 is ideal for industrial control systems where reliable, long-distance communication is critical. Its 500 kbps data rate and ±12 kV ESD protection ensure robust operation in noisy factory environments. The wide supply voltage range (3.0 V to 5.5 V) allows integration with various logic levels, and the half-duplex operation simplifies wiring in multi-drop networks. The MSOP-8 package saves PCB space, making it suitable for compact PLC modules and remote I/O units.
Recommended
Building Automation
In building automation, the ADM3061EBRMZ-RL7 enables communication between HVAC controllers, lighting systems, and security panels. Its fail-safe receiver ensures a defined output when the bus is idle, preventing false triggers. The -40°C to +125°C temperature range allows operation in unconditioned spaces. The device's low power consumption and 3.3 V operation make it suitable for battery-powered sensors. The compact MSOP package fits into small form-factor controllers.
Recommended
Remote Sensor Networks
The ADM3061EBRMZ-RL7 is well-suited for remote sensor networks that require long-distance data transmission. Its differential signaling provides noise immunity over long cable runs, and the 500 kbps data rate is sufficient for most sensor data. The ±12 kV ESD protection guards against electrostatic discharge during installation and maintenance. The wide supply range allows operation from battery or solar-powered systems. The half-duplex interface reduces wiring complexity in multi-point networks.
Recommended
HVAC Controllers
The ADM3061EBRMZ-RL7 is used in HVAC controllers to communicate with thermostats, dampers, and central management systems. Its robust ESD protection and wide temperature range ensure reliable operation in rooftop units and mechanical rooms. The 3.0 V to 5.5 V supply range allows direct interfacing with both 3.3 V and 5 V microcontrollers. The fail-safe receiver prevents false commands during bus idle, enhancing system safety. The MSOP-8 package is ideal for space-constrained controller boards.
Recommended
Instrumentation
In instrumentation, the ADM3061EBRMZ-RL7 provides reliable communication between measurement devices and data acquisition systems. Its 500 kbps data rate supports high-speed data logging, and the ±12 kV ESD protection ensures durability in field use. The wide supply range and low power consumption make it suitable for portable instruments. The half-duplex operation simplifies cabling in multi-device setups. The compact MSOP package allows integration into handheld devices.
Recommended
Security Systems
The ADM3061EBRMZ-RL7 is used in security systems for communication between control panels, sensors, and cameras. Its fail-safe receiver ensures reliable operation even when the bus is idle, preventing false alarms. The ±12 kV ESD protection is critical for outdoor installations. The wide temperature range allows operation in extreme environments. The half-duplex interface reduces wiring cost in large installations. The MSOP-8 package is suitable for compact security modules.
Recommended
Recommended Products Summary
Engineering reference data for ADM3061EBRMZ-RL7 — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | ADM3061EBRMZ-R7 | ADM3061EBRZ | MAX3485E | ISL3170E |
|---|---|---|---|---|---|
| Package | 8-MSOP | 8-MSOP | 8-SOIC | 8-SOIC | 8-SOIC |
| Brand | Analog Devices | Analog Devices | Analog Devices | Maxim Integrated | Renesas |
| Data Rate | 500 kbps | 500 kbps | 500 kbps | 10 Mbps | 20 Mbps |
| Supply Voltage | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 3.6 V | 3 V to 3.6 V |
| ESD Protection | ±12 kV IEC | ±12 kV IEC | ±12 kV IEC | ±15 kV HBM | ±16.5 kV HBM |
| Operating Temperature | -40°C to +125°C | -40°C to +125°C | -40°C to +125°C | -40°C to +85°C | -40°C to +85°C |
| Fail-Safe | Open, short, idle | Open, short, idle | Open, short, idle | Open, short, idle | Open, short, idle |
| Price (1pc) | $2.45 | $2.45 | $2.30 | $1.80 | $2.00 |
Key Differentiators
- Wide supply voltage range (3.0 V to 5.5 V) (vs MAX3485E)
- Extended temperature range (-40°C to +125°C) (vs ISL3170E)
- ±12 kV IEC ESD protection (vs MAX3485E)
Design Notes
Place the ADM3061EBRMZ-RL7 close to the bus connector to minimize trace length and reduce EMI. Use 120 Ω termination resistors at both ends of the RS-485 bus to prevent signal reflections. Keep the A and B traces parallel and close together to maintain differential impedance.
Decouple the VCC pin with a 0.1 µF ceramic capacitor placed as close as possible to the device. For noisy industrial environments, add a 10 µF electrolytic capacitor in parallel. Ensure the ground plane is solid and continuous to provide a low-impedance return path.
Do not leave the RE and DE pins floating; tie them to appropriate logic levels to avoid unintended operation. When the bus is idle, ensure proper biasing to maintain a defined receiver output. Avoid exceeding the absolute maximum ratings on the A and B pins, as this can damage the device despite ESD protection.
Compliance Information
RoHS compliant per Analog Devices product page. Not AEC-Q100 qualified.
