ADS774KP-4 - 12-Bit SAR ADC, 28-PDIP | Texas Instruments
MPN: ADS774KP-4 ✓ ActiveADS774KP-4 Overview
An ADC is an analog-to-digital converter, a semiconductor that transforms a continuously varying voltage into a numeric value for processing by a microprocessor, microcontroller, or digital control system. The ADS774 belongs to the successive-approximation ADC hierarchy, within the broader ADC and data-converter category. Successive-approximation conversion compares the sampled input against an internal DAC and determines successive binary bits until the converter reaches its final 12-bit code.
The ADS774 uses a low-power CMOS implementation and an innovative capacitor-array CDAC. Internal sampling eliminates the external sample-and-hold circuit required in many designs. According to the manufacturer datasheet, the ADS774 is a drop-in replacement for ADC574, ADC674, and ADC774 models in most applications. Its microprocessor-compatible interface and single +5 V operation simplify migration from older parallel-interface converter families.
The architecture is intended to provide complete conversion without external sample-and-hold circuitry in most applications. The manufacturer identifies a maximum conversion time of 8.5 microseconds over the operating temperature range. Because the converter uses successive approximation, its conversion behavior is predictable and well suited to control loops, industrial measurement systems, legacy processor interfaces, and instrumentation requiring a 12-bit result.
Typical applications include industrial process monitoring, laboratory and test instrumentation, embedded industrial control, legacy data-acquisition systems, and embedded measurement subsystems. The 28-pin PDIP package also supports through-hole prototyping and repair workflows where a surface-mount package would be inconvenient. Engineers should verify signal levels, interface timing, reference requirements, and acquisition sequencing against the device-specific ordering information before releasing a production design.
A key implementation consideration is the analog input and reference arrangement. Keep analog traces short, place input conditioning close to the converter, and follow the datasheet recommendations for bypass and reference components. Because the ADS774KP-4 is a legacy-style PDIP device, its availability and environmental qualification should be checked against the current manufacturer product information before a new design is released.
This product page combines the ADS774KP-4 ordering identity, family-level conversion characteristics, package information, replacement relationships, and practical design guidance. It also distinguishes verified technical facts from information that requires confirmation in the complete manufacturer datasheet, helping engineers assess whether this converter fits an existing 28-PDIP acquisition design.
Drop-in alternatives for ADS774KP-4 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with ADS774KP-4 (same form factor and footprint) — differing in Architecture, Mounting Type, Package, Supply Voltage.
ADS774KP
✅ Drop-InContact for price
View Datasheet →ADS774JU
✅ Drop-InContact for price
View Datasheet →ADS774KP-4 Maximum Ratings & Electrical Characteristics
| Converter Type | Successive-approximation ADC |
| Resolution | 12 bit |
| Number of Analog Inputs | 1 input |
| Architecture | Capacitor-array CDAC |
| Process Technology | Low-power CMOS |
| Maximum Conversion Time | 8.5 us over temperature |
| Supply Voltage | +5 V single supply |
| Internal Sampling | Yes |
| External Sample-and-Hold Requirement | Eliminated in most applications |
| Microprocessor Interface | Microprocessor-compatible |
| Package | 28-pin PDIP |
| Mounting Type | Through-hole |
ADS774KP-4 28-pin pdip Pin Configuration Guide
Pin configuration for ADS774KP-4 (28-pin pdip package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.
No detailed pinout data available for ADS774KP-4.
Refer to the datasheet for full pin configuration.
Typical Applications
ADS774KP-4 is suitable for 6 applications: Industrial Process Monitoring, Laboratory Instrumentation, Legacy Data-Acquisition Systems, Embedded Control Measurement, Sensor Signal Acquisition, Through-Hole Educational Prototypes.
Industrial Process Monitoring
The ADS774KP-4 is appropriate for industrial process monitoring when the required resolution and acquisition speed fit a 12-bit successive-approximation converter. Its maximum conversion time of 8.5 microseconds provides a defined upper limit for successive measurements, while internal sampling can simplify the analog front end compared with systems requiring an external sample-and-hold stage. The single +5 V supply and microprocessor-compatible interface are useful when conditioning a sensor signal and transferring the result to an embedded controller. Before deployment, confirm the exact input range, reference accuracy, operating temperature, and calibration requirements against the sensor and production test plan.
Recommended
Laboratory Instrumentation
The ADS774KP-4 can serve as the acquisition element in a laboratory instrument that converts a controlled analog measurement into a 12-bit digital result. The 8.5 microsecond maximum conversion time supports relatively quick successive readings, and the internal sampling architecture reduces the number of external signal-conditioning functions needed in many designs. Its microprocessor-compatible interface is particularly useful when the instrument uses a legacy parallel data bus. Instrument designers should still budget for input protection, reference stability, grounding, calibration, and sufficient acquisition time for the slowest sensor or measurement chain.
Recommended
Legacy Data-Acquisition Systems
The ADS774KP-4 is a practical candidate for repairing or extending a legacy data-acquisition system that already uses a compatible 28-PDIP converter interface. Because the ADS774 family is described as a drop-in replacement for ADC574, ADC674, and ADC774 models in most applications, an existing board may require minimal schematic and layout changes. The single +5 V supply and low-power CMOS implementation can simplify integration with older processor boards. A replacement should not be approved solely from package appearance: verify every numbered pin, the input polarity and range, reference connection, conversion timing, and logic levels before installation.
Recommended
Embedded Control Measurement
The ADS774KP-4 fits embedded control measurements that require a 12-bit ADC and can accommodate the conversion rate of a successive-approximation architecture. Its maximum conversion time of 8.5 microseconds helps define the time required for each conversion, while the microprocessor-compatible interface supports acquisition by a controller or dedicated logic. Internal sampling may reduce the analog complexity of a feedback loop compared with a discrete sample-and-hold circuit. Design the control loop around the actual conversion and acquisition cycle, maintain a stable reference, and include input filtering appropriate to the physical quantity being measured.
Recommended
Sensor Signal Acquisition
The ADS774KP-4 can digitize sensor outputs in measurement systems where 12-bit resolution is sufficient and the input can be conditioned into the converter’s supported analog range. Internal sampling helps reduce external circuitry in many sensor-acquisition designs, while the 8.5 microsecond maximum conversion time provides a defined starting point for update-rate planning. A practical implementation should place amplification and filtering close to the converter, use a stable reference, and separate sensitive analog routing from digital clock and data paths. Verify the input range and acquisition timing before selecting input-conditioning component values.
Recommended
Through-Hole Educational Prototypes
The 28-PDIP package makes the ADS774KP-4 convenient for educational prototypes, breadboard-oriented interface experiments, and repair boards that are not assembled with automated surface-mount equipment. Its 12-bit conversion result can be used to teach successive-approximation operation, digital acquisition timing, reference behavior, and processor interfacing. The through-hole package also exposes every connection for probing, unlike a compact leadless package. Because the -4 suffix represents a specific ordering option, instructors and engineers should confirm the complete device specification and temperature grade before comparing it with another ADS774 package variant.
Recommended
Recommended Products Summary
Engineering reference data for ADS774KP-4 — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | ADS774KP | ADS774JU |
|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 28-PDIP | 28-PDIP | 28-PDIP |
| Resolution | 12 bit | 12 bit | 12 bit |
| Converter Type | Successive-approximation ADC | Successive-approximation ADC | Successive-approximation ADC |
| Number of Analog Inputs | 1 input | 1 input | 1 input |
| Maximum Conversion Time | 8.5 us over temperature | 8.5 us over temperature | 8.5 us over temperature |
| Supply Voltage | +5 V single supply | +5 V single supply | +5 V single supply |
| Internal Sampling | Yes | Yes | Yes |
Key Differentiators
- Exact legacy-style 28-PDIP construction (vs ADS774JU)
- Complete integrated sampling function (vs ADC574)
- Single +5 V implementation (vs ADC674)
- Defined maximum conversion time (vs ADC774)
Design Notes
Route the analog input directly to the converter and place any required input network close to the corresponding pins. Keep the digital data and control traces away from the analog input and reference routing, especially where clock edges are present. The ADS774 uses a low-power CMOS CDAC and internal sampling, but external trace length still adds noise, coupling, and acquisition error. Use the complete pin-description table and recommended layout in the manufacturer datasheet before assigning tracks.
Decouple the single +5 V supply at the converter with the capacitance and placement specified by the manufacturer datasheet. Keep the power loop compact, provide a low-impedance return path, and avoid sharing narrow copper areas with sensitive analog routing. The internal CDAC architecture requires a stable supply and reference for repeatable conversion results. Confirm the allowed supply tolerance, reference arrangement, input range, and bypass values for the exact ordering option.
Do not assume that equal package dimensions guarantee pin compatibility. Compare every numbered connection, input polarity and range, reference voltage, digital logic level, conversion timing, and control sequence with the original device. The manufacturer describes ADS774 as a drop-in replacement for ADC574, ADC674, and ADC774 models in most applications, but the qualifier is important. Use the -4 ordering details and full datasheet to resolve temperature-grade, qualification, and lifecycle differences.
Plan each conversion cycle around the 8.5 microsecond maximum conversion time and include the acquisition interval required by the complete datasheet. Synchronize processor reads, control signals, and any multiplexer switching to avoid capturing a transition during sampling. For slow sensor signals, allow additional settling and filtering time rather than treating the maximum conversion rate as the required measurement rate.
Compliance Information
The manufacturer datasheet excerpt does not provide explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status for the exact ADS774KP-4 ordering option.