Texas Instruments

ADS774KP-4 - 12-Bit SAR ADC, 28-PDIP | Texas Instruments

MPN: ADS774KP-4 ✓ Hoạt động
+5 V single supply Vdss 28-pin PDIP Package
MOQ: 1 |

ADS774KP-4 Tóm tắt

Texas Instruments ADS774KP-4 is a 12-bit, single-input successive-approximation analog-to-digital converter in a 28-pin PDIP package. It operates from a single +5 V supply and converts an analog input through an internal capacitor-array CDAC. The converter supports microprocessor-compatible interfacing, internal sampling, and a maximum conversion time of 8.5 microseconds over temperature. Its 12-bit resolution corresponds to 4096 discrete codes for bipolar input ranges supported by the ADS774 family.

An ADC is an analog-to-digital converter, a semiconductor that transforms a continuously varying voltage into a numeric value for processing by a microprocessor, microcontroller, or digital control system. The ADS774 belongs to the successive-approximation ADC hierarchy, within the broader ADC and data-converter category. Successive-approximation conversion compares the sampled input against an internal DAC and determines successive binary bits until the converter reaches its final 12-bit code.

The ADS774 uses a low-power CMOS implementation and an innovative capacitor-array CDAC. Internal sampling eliminates the external sample-and-hold circuit required in many designs. According to the manufacturer datasheet, the ADS774 is a drop-in replacement for ADC574, ADC674, and ADC774 models in most applications. Its microprocessor-compatible interface and single +5 V operation simplify migration from older parallel-interface converter families.

The architecture is intended to provide complete conversion without external sample-and-hold circuitry in most applications. The manufacturer identifies a maximum conversion time of 8.5 microseconds over the operating temperature range. Because the converter uses successive approximation, its conversion behavior is predictable and well suited to control loops, industrial measurement systems, legacy processor interfaces, and instrumentation requiring a 12-bit result.

Typical applications include industrial process monitoring, laboratory and test instrumentation, embedded industrial control, legacy data-acquisition systems, and embedded measurement subsystems. The 28-pin PDIP package also supports through-hole prototyping and repair workflows where a surface-mount package would be inconvenient. Engineers should verify signal levels, interface timing, reference requirements, and acquisition sequencing against the device-specific ordering information before releasing a production design.

A key implementation consideration is the analog input and reference arrangement. Keep analog traces short, place input conditioning close to the converter, and follow the datasheet recommendations for bypass and reference components. Because the ADS774KP-4 is a legacy-style PDIP device, its availability and environmental qualification should be checked against the current manufacturer product information before a new design is released.

This product page combines the ADS774KP-4 ordering identity, family-level conversion characteristics, package information, replacement relationships, and practical design guidance. It also distinguishes verified technical facts from information that requires confirmation in the complete manufacturer datasheet, helping engineers assess whether this converter fits an existing 28-PDIP acquisition design.

Bộ thay thế dễ dàng lắp đặt cho ADS774KP-4 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với ADS774KP-4 (cùng hình factor và footprint) — khác nhau ở Architecture, Mounting Type, Package, Supply Voltage.

Texas Instruments
Architecture: Successive-approximation ADC (SAR)
Mounting Type: Through-hole SOIC
Package: 28-pin SOIC (DW)
So sánh với ADS774KP-4 →

ADS774KP

✅ Drop-In
Texas Instruments
📦 28-PDIP
12 bit · 1 input · Successive approximation (SAR) · 8.5 us · +5 V · Yes · Yes · Yes

Liên hệ để biết giá

Xem tài liệu →

ADS774JU

✅ Drop-In
Texas Instruments
📦 28-PDIP
12 bit · 125 kSPS · 8.5 µs maximum over temperature · 1 channel · Successive-approximation ADC (SAR) · Capacitor-array CDAC · 4.5 V to 5.5 V · ±10 V supported by internal scaling resistors

Liên hệ để biết giá

Xem tài liệu →

ADS774KP-4 Tỷ lệ tối đa & tính chất điện

Converter Type Successive-approximation ADC
Độ phân giải 12 bit
Number of Analog Inputs 1 input
Architecture Capacitor-array CDAC
Process Technology Low-power CMOS
Maximum Conversion Time 8.5 us over temperature
Điện áp cung cấp +5 V single supply
Internal Sampling Yes
External Sample-and-Hold Requirement Eliminated in most applications
Microprocessor Interface Microprocessor-compatible
Hộp 28-pin PDIP
Kiểu lắp đặt Through-hole

Hướng dẫn cấu hình chân ADS774KP-4 28-pin pdip

Cấu hình chân cho ADS774KP-4 (28-pin pdip gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.

Bảng cấu hình chân 28-pin pdip cho ADS774KP-4

Không có dữ liệu chân cụ thể sẵn có cho ADS774KP-4.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

ADS774KP-4 phù hợp cho 6 Áp dụngs: Industrial Process Monitoring, Laboratory Instrumentation, Legacy Data-Acquisition Systems, Embedded Control Measurement, Sensor Signal Acquisition, Through-Hole Educational Prototypes.

🏭

Industrial Process Monitoring

The ADS774KP-4 is appropriate for industrial process monitoring when the required resolution and acquisition speed fit a 12-bit successive-approximation converter. Its maximum conversion time of 8.5 microseconds provides a defined upper limit for successive measurements, while internal sampling can simplify the analog front end compared with systems requiring an external sample-and-hold stage. The single +5 V supply and microprocessor-compatible interface are useful when conditioning a sensor signal and transferring the result to an embedded controller. Before deployment, confirm the exact input range, reference accuracy, operating temperature, and calibration requirements against the sensor and production test plan.

🖥️

Laboratory Instrumentation

The ADS774KP-4 can serve as the acquisition element in a laboratory instrument that converts a controlled analog measurement into a 12-bit digital result. The 8.5 microsecond maximum conversion time supports relatively quick successive readings, and the internal sampling architecture reduces the number of external signal-conditioning functions needed in many designs. Its microprocessor-compatible interface is particularly useful when the instrument uses a legacy parallel data bus. Instrument designers should still budget for input protection, reference stability, grounding, calibration, and sufficient acquisition time for the slowest sensor or measurement chain.

🔧

Legacy Data-Acquisition Systems

The ADS774KP-4 is a practical candidate for repairing or extending a legacy data-acquisition system that already uses a compatible 28-PDIP converter interface. Because the ADS774 family is described as a drop-in replacement for ADC574, ADC674, and ADC774 models in most applications, an existing board may require minimal schematic and layout changes. The single +5 V supply and low-power CMOS implementation can simplify integration with older processor boards. A replacement should not be approved solely from package appearance: verify every numbered pin, the input polarity and range, reference connection, conversion timing, and logic levels before installation.

⚡

Embedded Control Measurement

The ADS774KP-4 fits embedded control measurements that require a 12-bit ADC and can accommodate the conversion rate of a successive-approximation architecture. Its maximum conversion time of 8.5 microseconds helps define the time required for each conversion, while the microprocessor-compatible interface supports acquisition by a controller or dedicated logic. Internal sampling may reduce the analog complexity of a feedback loop compared with a discrete sample-and-hold circuit. Design the control loop around the actual conversion and acquisition cycle, maintain a stable reference, and include input filtering appropriate to the physical quantity being measured.

🧩

Sensor Signal Acquisition

The ADS774KP-4 can digitize sensor outputs in measurement systems where 12-bit resolution is sufficient and the input can be conditioned into the converter’s supported analog range. Internal sampling helps reduce external circuitry in many sensor-acquisition designs, while the 8.5 microsecond maximum conversion time provides a defined starting point for update-rate planning. A practical implementation should place amplification and filtering close to the converter, use a stable reference, and separate sensitive analog routing from digital clock and data paths. Verify the input range and acquisition timing before selecting input-conditioning component values.

📚

Through-Hole Educational Prototypes

The 28-PDIP package makes the ADS774KP-4 convenient for educational prototypes, breadboard-oriented interface experiments, and repair boards that are not assembled with automated surface-mount equipment. Its 12-bit conversion result can be used to teach successive-approximation operation, digital acquisition timing, reference behavior, and processor interfacing. The through-hole package also exposes every connection for probing, unlike a compact leadless package. Because the -4 suffix represents a specific ordering option, instructors and engineers should confirm the complete device specification and temperature grade before comparing it with another ADS774 package variant.

Tóm tắt các sản phẩm được đề xuất

ADC574 Legacy converter family identified as replaceable by ADS774 Được sử dụng trong: Industrial Process Monitoring, Laboratory Instrumentation, Legacy Data-Acquisition Systems, Embedded Control Measurement ADC674 Legacy converter family identified as replaceable by ADS774 Được sử dụng trong: Industrial Process Monitoring, Laboratory Instrumentation, Legacy Data-Acquisition Systems, Sensor Signal Acquisition ADC774 Legacy converter family identified as replaceable by ADS774 Được sử dụng trong: Industrial Process Monitoring, Laboratory Instrumentation, Legacy Data-Acquisition Systems, Sensor Signal Acquisition, Through-Hole Educational Prototypes ADS774KP Texas Instruments Được sử dụng trong: Embedded Control Measurement, Sensor Signal Acquisition, Through-Hole Educational Prototypes ADS774JU Texas Instruments Được sử dụng trong: Embedded Control Measurement, Through-Hole Educational Prototypes
What is the ADS774KP-4?
The ADS774KP-4 is a Texas Instruments 12-bit, single-input, successive-approximation analog-to-digital converter packaged in a 28-pin PDIP. It uses an internal capacitor-array CDAC, includes internal sampling, operates from a single +5 V supply, and provides a microprocessor-compatible interface. The manufacturer describes it as a drop-in replacement for ADC574, ADC674, and ADC774 models in most applications.
What are the key specifications of ADS774KP-4 that engineers should know?
The ADS774KP-4 provides 12-bit resolution, one analog input, successive-approximation conversion, and a maximum conversion time of 8.5 microseconds over temperature. It uses a low-power CMOS CDAC architecture, supports internal sampling, operates from a single +5 V supply, and is offered in a 28-pin PDIP package. These characteristics make it suitable for legacy microprocessor interfaces and industrial measurement systems.
Where can I download the ADS774KP-4 datasheet PDF?
The ADS774KP-4 datasheet PDF is available from the official Texas Instruments product page at https://www.ti.com/product/ADS774, and the manufacturer-hosted PDF is linked at https://www.ti.com/lit/ds/symlink/ads774.pdf. The datasheet is the controlling document for the complete pin descriptions, ordering codes, electrical limits, timing diagrams, analog input ranges, reference configuration, and recommended application circuits.
Where can I find the ADS774KP-4 pinout?
Use the pin-description table in the Texas Instruments ADS774 manufacturer datasheet to identify every connection in the 28-pin PDIP package. The product description confirms a 28-pin PDIP, but the complete numbered pin list is not reproduced on this page. Do not infer pin functions from package position alone; verify signal names, power pins, analog inputs, digital outputs, and control pins before laying out or modifying a PCB.
Can ADS774KP-4 replace ADC574, ADC674, and ADC774 devices?
Yes, the manufacturer states that ADS774 is a drop-in replacement for ADC574, ADC674, and ADC774 models in most applications. Its internal sampling, low-power CMOS construction, and single +5 V supply operation can simplify existing converter designs. Because “most applications” leaves room for exceptions, engineers should compare pin functions, input ranges, timing, logic levels, reference behavior, and supply requirements before approving a substitution.
Is ADS774KP-4 suitable for industrial measurement applications?
The ADS774KP-4 is suitable for industrial measurement designs that can use a 12-bit successive-approximation converter with a maximum conversion time of 8.5 microseconds. Its internal sampling, microprocessor-compatible interface, and single +5 V operation simplify signal acquisition around embedded processors. For new industrial systems, verify the exact operating-temperature rating, analog input range, reference accuracy, and long-term availability against the current manufacturer documentation.
ADS774KP-4 vs ADS774KP - which part should I choose?
ADS774KP-4 and ADS774KP both identify 12-bit Texas Instruments successive-approximation converters associated with the 28-PDIP ADS774 family. The “-4” suffix distinguishes the exact ordering variant, so the correct choice depends on its device-specific temperature grade, qualification status, and purchasing code. Confirm the full ordering table and current lifecycle information before treating the two MPNs as interchangeable.
What can replace the ADS774KP-4?
The ADS774KP is the closest documented same-family option because it is identified as a 12-bit, one-input, 28-PDIP ADS774 device. The ADS774 family is also described as a replacement for ADC574, ADC674, and ADC774 models in most applications. A true drop-in decision requires matching the exact pinout, analog input range, reference arrangement, digital timing, and electrical limits rather than relying only on resolution and package type.
Is the ADS774KP-4 the same as the ADS774KP?
The ADS774KP-4 and ADS774KP are not necessarily identical in every ordering characteristic, although both belong to the Texas Instruments ADS774 12-bit converter family. The available product descriptions associate ADS774KP with a 28-PDIP package and identify ADS774KP-4 as a distinct full MPN. Review the manufacturer ordering table for temperature range, package, and qualification differences before substitution.
When should I choose ADS774KP-4 over ADS774KP?
Choose ADS774KP-4 when its exact orderable temperature grade, qualification status, and lifecycle conditions match the system requirements. Choose ADS774KP only after confirming that its device-specific specifications preserve the same 28-PDIP pin functions, input ranges, timing, and interface behavior. For both variants, the complete ordering information is more important than the shared 12-bit resolution and conversion architecture.
Is ADS774KP-4 an appropriate replacement for an ADC574?
The ADS774KP-4 can be considered for an ADC574 replacement because the manufacturer describes the ADS774 as a drop-in replacement for ADC574 in most applications. Before conversion, check that the PCB footprint, power requirements, analog input polarity and range, reference voltage, conversion timing, and digital output timing are compatible. The phrase “most applications” does not guarantee compatibility for every ADC574 implementation.
What is the best Texas Instruments equivalent for ADS774KP-4?
The best documented Texas Instruments family alternative is the ADS774KP, because it is identified as a 12-bit, one-input, 28-PDIP ADS774 converter. The manufacturer also positions the ADS774 as a replacement for older ADC574, ADC674, and ADC774 families. Verify the exact ordering suffix and all pin-specific electrical requirements, because package and resolution matching alone do not prove full drop-in compatibility.
Where can I buy ADS774KP-4 online?
Use the “Request a Quote” form on this page to request the current ADS774KP-4 price, stock status, minimum order quantity, and lead time. The form routes the request through the XAIPART product workflow and avoids presenting a static price or availability claim that may quickly become obsolete. Include your required quantity, packaging preference, date code requirement, and target delivery date in the request.
What is the price of ADS774KP-4?
The current ADS774KP-4 price is best obtained through the “Request a Quote” form on this page. Submit the required quantity and any date-code, packaging, and delivery constraints so the offer reflects the exact orderable MPN. The page does not present a static price figure because procurement costs, inventory, and lead time can change independently of the component’s technical characteristics.
What is the lead time and stock status for ADS774KP-4?
Request the current ADS774KP-4 stock status and lead time through the “Request a Quote” form on this page. Include your required quantity, acceptable date code, factory-seal preference, and target production date. The manufacturer product page and distributor listing indicate that the part is orderable, but a confirmed delivery commitment should be tied to the exact MPN, quantity, and packaging configuration.

Dữ liệu tham khảo kỹ thuật cho ADS774KP-4 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose ADS774KP-4 when an existing design requires a 12-bit, one-input, 28-PDIP successive-approximation converter and the exact -4 ordering variant satisfies the system’s temperature and qualification requirements. Its internal sampling, single +5 V operation, and 8.5 microsecond maximum conversion time make it useful for industrial monitoring, legacy acquisition systems, and through-hole prototypes. Consider ADS774KP when its exact ordering details provide a better lifecycle or availability match without changing the required electrical behavior. Consider ADS774JU only after confirming its complete suffix, package, temperature grade, and pin-level compatibility. For ADC574, ADC674, or ADC774 migrations, the manufacturer’s “drop-in replacement in most applications” statement provides a strong starting point, but input range, reference voltage, timing, logic levels, and every numbered pin must still be checked before PCB reuse.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này ADS774KP ADS774JU
Brand Texas Instruments Texas Instruments Texas Instruments
Package 28-PDIP 28-PDIP 28-PDIP
Resolution 12 bit 12 bit 12 bit
Converter Type Successive-approximation ADC Successive-approximation ADC Successive-approximation ADC
Number of Analog Inputs 1 input 1 input 1 input
Maximum Conversion Time 8.5 us over temperature 8.5 us over temperature 8.5 us over temperature
Supply Voltage +5 V single supply +5 V single supply +5 V single supply
Internal Sampling Yes Yes Yes

Bảo phân biệt quan trọng

  • Exact legacy-style 28-PDIP construction (vsADS774JU)
  • Complete integrated sampling function (vsADC574)
  • Single +5 V implementation (vsADC674)
  • Defined maximum conversion time (vsADC774)

Ghi chú thiết kế

Route the analog input directly to the converter and place any required input network close to the corresponding pins. Keep the digital data and control traces away from the analog input and reference routing, especially where clock edges are present. The ADS774 uses a low-power CMOS CDAC and internal sampling, but external trace length still adds noise, coupling, and acquisition error. Use the complete pin-description table and recommended layout in the manufacturer datasheet before assigning tracks.

Decouple the single +5 V supply at the converter with the capacitance and placement specified by the manufacturer datasheet. Keep the power loop compact, provide a low-impedance return path, and avoid sharing narrow copper areas with sensitive analog routing. The internal CDAC architecture requires a stable supply and reference for repeatable conversion results. Confirm the allowed supply tolerance, reference arrangement, input range, and bypass values for the exact ordering option.

Do not assume that equal package dimensions guarantee pin compatibility. Compare every numbered connection, input polarity and range, reference voltage, digital logic level, conversion timing, and control sequence with the original device. The manufacturer describes ADS774 as a drop-in replacement for ADC574, ADC674, and ADC774 models in most applications, but the qualifier is important. Use the -4 ordering details and full datasheet to resolve temperature-grade, qualification, and lifecycle differences.

Plan each conversion cycle around the 8.5 microsecond maximum conversion time and include the acquisition interval required by the complete datasheet. Synchronize processor reads, control signals, and any multiplexer switching to avoid capturing a transition during sampling. For slow sensor signals, allow additional settling and filtering time rather than treating the maximum conversion rate as the required measurement rate.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The manufacturer datasheet excerpt does not provide explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status for the exact ADS774KP-4 ordering option.

Dữ liệu được xác minh vào: 2026-11-14 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

ADS774KP-4 datasheet ADS774KP-4 datasheet pdf ADS774KP-4 pinout ADS774KP-4 specifications ADS774KP-4 equivalent ADS774KP-4 replacement ADS774KP-4 cross reference ADS774KP-4 28-PDIP footprint ADS774KP-4 price ADS774KP-4 stock ADS774KP-4 vs ADS774KP Texas Instruments ADS774KP-4

Các bộ phận và thuật ngữ liên quan

Texas Instruments ADS774KP-4 ADS774KP ADS774JU ADC574 ADC674 ADC774 analog-to-digital converter ADC successive-approximation ADC SAR ADC data converter microprocessor-compatible ADC 12-bit resolution capacitor-array CDAC low-power CMOS internal sampling single +5 V supply 8.5 microsecond conversion time 28-pin PDIP through-hole package industrial process monitoring sensor signal acquisition laboratory instrumentation legacy data-acquisition system
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ