Texas Instruments

ADS7818P - 12-Bit 500 kSPS SAR ADC | Texas Instruments

MPN: ADS7818P ✓ Active
2.5 V Vdss 8-pin PDIP Package
MOQ: 1 |

ADS7818P Overview

The Texas Instruments ADS7818P is a 12-bit successive-approximation sampling analog-to-digital converter with one unipolar input, a 500 kSPS throughput rate, an internal 2.5 V reference, and a synchronous serial interface. It is housed in an 8-pin PDIP package and supports an input range from 0 V to 5 V, corresponding to zero to twice the internal reference voltage. The converter combines an integrated sample-and-hold circuit with typical power dissipation of 11 mW at 500 kSPS. A power-down mode reduces typical dissipation to 2.5 mW, making the device suitable for portable instrumentation and battery-powered measurement systems.

A sampling ADC is a type of analog-to-digital converter that acquires an input voltage, holds that voltage during conversion, and converts it into a digital code. The ADS7818P belongs to the successive-approximation, or SAR, ADC family, which uses a comparator and internal DAC to determine each output bit through a sequence of binary trials. SAR converters are widely used when moderate resolution, predictable conversion timing, low power consumption, and compact serial-interface implementation are more important than maximum conversion speed.

The main features of the ADS7818P are its 12-bit resolution, 500 kSPS sampling throughput, internal 2.5 V reference, and low-power operation. The 0 V to 5 V input range allows the converter to use the internal reference directly without an external reference circuit. The synchronous serial interface supports straightforward connection to microcontrollers, DSPs, and other digital controllers while reducing the number of external pins. The 11 mW typical operating dissipation supports efficient data-acquisition designs, while the 2.5 mW power-down specification helps reduce consumption when measurements are intermittent.

The ADS7818P is suitable for industrial process monitoring, sensor instrumentation, portable data loggers, and embedded measurement systems. Its internal reference improves portability by reducing external component count and avoiding reference-routing errors. The 500 kSPS throughput is adequate for many pressure, temperature, position, and level sensing systems that require regular updates rather than high-frequency waveform capture. The 8-pin PDIP package also simplifies prototyping and through-hole assembly.

When designing the analog input path, keep the source impedance and settling time compatible with the ADC acquisition interval. Place the input and reference bypass capacitors close to their associated pins, keep the analog trace short, and route the synchronous clock and data lines away from sensitive input wiring. Use the power-down control when the measurement system operates intermittently, and account for the reference accuracy when establishing the overall measurement uncertainty.

This page provides a structured technical overview of the ADS7818P, including its operating characteristics, practical application guidance, packaging information, and design considerations. It also distinguishes the device from related ADS7818 package and ordering variants so engineers can identify the correct part for a new PCB or an existing design.

Drop-in alternatives for ADS7818P — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with ADS7818P (same form factor and footprint) — differing in Architecture, Operating Temperature, Package, Resolution.

Analog Devices
Architecture: SAR (Successive Approximation)
Operating Temperature: -40 C to +85 C (Industrial)
Resolution: 12 bits
Compare with ADS7818P →
Texas Instruments
Architecture: Successive Approximation Register (SAR)
Operating Temperature: -40C to +85C (industrial)
Package: 24-DIP (0.300 inch, 7.62 mm) through-hole

ADS7818PG4

✅ Drop-In
📦 8-pin PDIP
Same ADS7818 12-bit SAR converter and 8-pin PDIP package; ordering code may change grade or processing details, with no verified performance delta stated

📋 Reference alternative (not in catalog)

ADS7818P Maximum Ratings & Electrical Characteristics

Converter Type 12-bit successive-approximation sampling ADC
Input Channels 1
Throughput Rate 500 kSPS
Input Range 0 V to 5 V
Internal Reference Voltage 2.5 V
Reference Relationship Input range equals zero to twice the reference voltage
Typical Power Dissipation 11 mW at 500 kSPS
Power-Down Power Dissipation 2.5 mW
Interface Synchronous serial interface
Sample-and-Hold Circuit Integrated
Package 8-pin PDIP
Mounting Type Through-hole
Temperature Grade Industrial
Terminal Count 8
Input Architecture Single-ended unipolar input
Digital Output 12-bit
Power-Down Mode Yes
Manufacturer Product Page https://www.ti.com/product/ADS7818

ADS7818P 8-pin pdip Pin Configuration Guide

Pin configuration for ADS7818P (8-pin pdip package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.

8-pin pdip package pinout diagram for ADS7818P

No detailed pinout data available for ADS7818P.

Refer to the datasheet for full pin configuration.

Typical Applications

ADS7818P is suitable for 6 applications: Industrial Sensor Measurement, Battery-Powered Data Logging, Process Control Monitoring, Embedded Control Systems, Test and Measurement Instruments, Educational and Prototype Circuits.

🏭

Industrial Sensor Measurement

The ADS7818P fits industrial sensor interfaces that require regular conversion of pressure, temperature, level, or position signals. Its 12-bit resolution provides 4096 discrete codes over the 0 V to 5 V input range, while the 500 kSPS throughput allows the controller to refresh measurements rapidly. The internal 2.5 V reference reduces external analog circuitry, and the 8-pin PDIP package simplifies through-hole prototyping. For reliable operation, condition the sensor output so it remains within the unipolar input range and account for source settling time before the sample-and-hold acquisition window.

🔋

Battery-Powered Data Logging

ADS7818P is useful in portable data loggers where measured analog signals must be captured without a large external reference circuit. The manufacturer datasheet reports typical dissipation of 11 mW at 500 kSPS and 2.5 mW in power-down mode, allowing the controller to activate the converter only during scheduled measurements. Its 12-bit resolution supports moderate-resolution environmental and asset monitoring. Battery life still depends on the MCU sleep strategy, sensor current, regulator quiescent current, and the number of conversions performed during each wake cycle.

🏭

Process Control Monitoring

The ADS7818P can digitize slow or moderate-speed process variables for supervisory control loops, panel instruments, and factory monitoring nodes. A 500 kSPS converter is substantially faster than the update rate of most temperature, pressure, and flow sensors, while the 0 V to 5 V input range maps naturally to many industrial signal-conditioning outputs. The internal 2.5 V reference supports compact two-rail circuitry. Engineers should verify the complete signal path against the ADC acquisition requirements and isolate high-energy or noisy factory wiring from the analog input.

🤖

Embedded Control Systems

ADS7818P is appropriate for embedded controllers that periodically read analog sensors through a compact synchronous serial interface. The 8-pin PDIP package provides an accessible prototype footprint, while the interface allows data transfer to a microcontroller, DSP, or programmable logic controller. Its 12-bit result provides more detail than an 8-bit converter and remains suitable for many feedback and status measurements. Firmware should initiate conversion and clock the result according to the timing diagram in the Texas Instruments ADS7818 manufacturer datasheet, and the PCB should keep clock traces away from the analog input.

🖥️

Test and Measurement Instruments

The ADS7818P can serve as the ADC in bench instruments, signal-conditioner prototypes, and automated test fixtures requiring a compact 12-bit measurement channel. Its 500 kSPS throughput supports rapid acquisition while the internal reference simplifies calibration and reduces the number of sensitive external components. For instrumentation-grade results, characterize offset, gain, reference error, noise, and input settling in the complete board rather than relying only on the nominal converter resolution. Keep the analog path short and provide stable supply and reference bypassing near the device.

🔧

Educational and Prototype Circuits

The ADS7818P is well suited to university laboratories and prototype boards because it combines 12-bit conversion, a 500 kSPS rate, an internal 2.5 V reference, and a through-hole 8-pin package. Students can connect an analog source, drive the synchronous interface from a microcontroller, and visualize code conversion without building an external reference network. The accessible package also simplifies probing and rework. For repeatable results, include calibration points, isolate the analog source from switching supplies, and follow the datasheet timing sequence for chip select, clock, and data readout.

What is the operating voltage range of ADS7818P?
The ADS7818P operates from a 5 V supply, while its analog input accepts signals from 0 V to 5 V. According to the Texas Instruments ADS7818 manufacturer datasheet, the internal 2.5 V reference defines the input range as zero to twice the reference voltage. The 5 V supply requirement and unipolar input range make the device appropriate for conventional 5 V instrumentation.
What is the conversion speed of ADS7818P?
The ADS7818P provides a throughput rate of 500 kSPS with 12-bit resolution. The Texas Instruments ADS7818 manufacturer datasheet identifies the device as a high-speed, low-power sampling ADC, with typical power dissipation of 11 mW at the 500 kSPS throughput rate. This rate is suitable for rapid sensor updates and general-purpose embedded measurement.
Does ADS7818P include an internal voltage reference?
Yes, the ADS7818P includes a 2.5 V internal reference. The Texas Instruments ADS7818 manufacturer datasheet states that the ADC is complete with an internal 2.5 V reference and that its input range extends from zero to twice the reference voltage, or 0 V to 5 V. The internal reference reduces external circuitry and simplifies portable or low-component-count designs.
What is the best drop-in replacement for ADS7818P?
The closest verified same-footprint alternative is ADS7818PG4, which is identified as an 8-pin PDIP variant of the ADS7818 family. Its package matches the ADS7818P mechanically, but ordering codes can indicate different grade or reel-processing details. Confirm the pinout, temperature grade, reference accuracy, and production requirements against the manufacturer datasheet before approving it as a drop-in replacement.
Can ADS7818PG4 replace ADS7818P on the same PCB?
ADS7818PG4 is the most credible same-package candidate for ADS7818P because both are identified as 8-pin PDIP ADS7818 variants. A final replacement still requires checking electrical limits, temperature range, and the exact marking and delivery requirements. Use the pin-description and ordering tables in the Texas Instruments ADS7818 manufacturer datasheet before committing the change.
Where can I download the ADS7818P datasheet PDF?
The official ADS7818P datasheet PDF is available from Texas Instruments at https://www.ti.com/lit/ds/symlink/ads7818.pdf. The document contains the electrical characteristics, pin descriptions, functional information, operating details, and package information needed for schematic capture and PCB design. Use the manufacturer PDF for design decisions and controlled documentation.
Where can I find the ADS7818P pinout?
The ADS7818P pinout is published in the Texas Instruments ADS7818 manufacturer datasheet on the official product page at https://www.ti.com/product/ADS7818. The ADS7818P uses an 8-pin PDIP package. Use the datasheet pin-description table when assigning power, ground, analog input, reference, control, clock, and data functions to the PCB footprint.
What are the key specifications of ADS7818P that engineers should know?
The ADS7818P is a 12-bit, single-input SAR ADC rated for 500 kSPS throughput. It includes a sample-and-hold circuit, a 2.5 V internal reference, a 0 V to 5 V unipolar input range, and a synchronous serial interface. According to the Texas Instruments ADS7818 manufacturer datasheet, typical dissipation is 11 mW during 500 kSPS operation and 2.5 mW in power-down mode.
What is ADS7818P vs ADS7818PG4?
ADS7818P and ADS7818PG4 are both listed as 8-pin PDIP members of the ADS7818 family, making ADS7818PG4 the closest mechanically compatible option identified. The meaningful distinction is the ordering and qualification code, which can control grade or processing details rather than the basic 12-bit SAR converter function. Compare the specific orderable rows and temperature requirements before substitution.
When should I choose ADS7818P over another 12-bit ADC?
Choose ADS7818P when a design needs a 12-bit SAR ADC with a 500 kSPS rate, a 0 V to 5 V input range, an integrated 2.5 V reference, and a through-hole 8-pin PDIP footprint. The manufacturer datasheet reports 11 mW typical operating dissipation and 2.5 mW power-down dissipation. It is a practical fit for prototypes, embedded sensors, and compact data-acquisition boards where an external reference is undesirable.
Is ADS7818P suitable for battery-powered sensor measurement?
The ADS7818P is suitable for intermittent battery-powered measurement because its power-down mode reduces typical dissipation to 2.5 mW, compared with 11 mW at 500 kSPS according to the Texas Instruments ADS7818 manufacturer datasheet. The internal reference and 8-pin package also reduce board area and external component count. Total battery life still depends on the supply, controller activity, and sampling duty cycle.
What can replace ADS7818P?
ADS7818PG4 is the closest verified drop-in candidate because it is an 8-pin PDIP member of the same ADS7818 family. Cross-brand substitutes were not established with sufficient package and pin-compatibility detail. A safe replacement decision requires checking the exact pin functions, electrical limits, operating temperature, reference behavior, and orderable qualification status in the manufacturer documentation.
Is ADS7818P the same as ADS7818EB/250?
The ADS7818P and ADS7818EB/250 are not confirmed as exact package-compatible alternatives. ADS7818P is listed with an 8-pin PDIP package, while the EB ordering option must be checked against the package table in the Texas Instruments ADS7818 manufacturer datasheet. Do not treat a shared 12-bit converter function as proof of pin-to-pin compatibility; verify the mechanical footprint and pin assignment first.
Where to buy ADS7818P online?
Use the Request a Quote form on this page to ask for ADS7818P availability, current lead time, and order handling. The request identifies the exact Texas Instruments part number, including the 8-pin PDIP package suffix. Confirm authorized sourcing status, date codes, and any required traceability terms when the quotation is returned.
What is the price of ADS7818P?
Submit an ADS7818P request through the Request a Quote form on this page for a current quotation and quantity-break review. The structured commercial data on this page does not publish a static price because quotation content can change with volume, supply position, and order parameters. Include your required quantities and packaging needs in the request.
Is ADS7818P in stock and what is its lead time?
Current ADS7818P inventory and lead time should be confirmed through the Request a Quote form on this page. The manufacturer product page identifies the ADS7818 family, while the exact P package orderable requires confirmation of quantity, delivery location, and acceptable date-code policy. Use the returned confirmation for production planning rather than relying on a generic catalog listing.

Engineering reference data for ADS7818P — comparison, design guidance, and compliance information.

Selection Guide

Choose ADS7818P for a new 8-pin PDIP design that requires a 12-bit SAR ADC, 500 kSPS throughput, a 0 V to 5 V input range, and an integrated 2.5 V reference. Its low operating and power-down dissipation make it appropriate for portable acquisition and embedded instrumentation. ADS7818PG4 is the closest same-package candidate identified, but its ordering code may represent a different grade or processing configuration, so verify temperature and qualification requirements before substitution. Other ADS7818 orderables with different package suffixes should not be treated as drop-in parts unless the package table and pin description confirm the same 8-pin PDIP footprint. For designs requiring a different resolution, throughput, reference arrangement, or package, perform a new parametric and footprint review rather than forcing a replacement.

Comparison with Alternatives

Parameter This Product ADS7818PG4
Package 8-pin PDIP 8-pin PDIP
Brand Texas Instruments Texas Instruments
Resolution 12 bit 12 bit
Converter Architecture Successive-approximation sampling ADC Successive-approximation sampling ADC
Throughput Rate 500 kSPS 500 kSPS
Input Channels 1 1
Input Range 0 V to 5 V 0 V to 5 V
Internal Reference 2.5 V 2.5 V
Typical Operating Power 11 mW at 500 kSPS 11 mW at 500 kSPS
Power-Down Power 2.5 mW 2.5 mW

Key Differentiators

  • Integrated reference reduces external analog components (vs ADS7818PG4)
  • Direct 500 kSPS measurement throughput (vs ADS7818PG4)
  • Low-power operation supports intermittent acquisition (vs ADS7818PG4)

Design Notes

Place the ADS7818P input and reference bypass capacitors close to their corresponding pins, and keep the analog input trace short. Route the synchronous clock and data lines away from the analog input to reduce coupling from digital switching activity. A quiet ground-return path beneath the analog section and a clear separation between the ADC and switching regulators or relay drivers help preserve conversion accuracy.

Use power-down mode whenever the acquisition sequence allows the converter to remain inactive between measurements. The Texas Instruments ADS7818 manufacturer datasheet reports typical dissipation of 11 mW at 500 kSPS and 2.5 mW in power-down mode. Account for supply current, digital-interface activity, and external sensor power when estimating the complete acquisition subsystem's energy use.

Do not assume that the nominal 12-bit resolution equals 12 bits of usable system accuracy. Reference error, comparator noise, source impedance, acquisition settling, supply variation, and PCB leakage all contribute to total uncertainty. Drive the input from a low-impedance source, allow the required settling interval, and calibrate the assembled board if measurement precision is important.

Keep the analog input path away from high-current switching nodes and keep the serial interface routing away from the input and reference pins. Use a compact ground return around the converter and avoid long traces that act as antennae. When replacing ADS7818P with ADS7818PG4, preserve the 8-pin PDIP footprint and verify the pin assignment, orientation, temperature grade, and ordering requirements before releasing the PCB revision.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The manufacturer product page and datasheet identify the ADS7818 family, but the listed web sources do not provide explicit compliance declarations for the ADS7818P orderable.

Data verified on: 2026-11-09 — data verified and curated by XAIPART's component engineering team

Related Searches

ADS7818P datasheet ADS7818P pinout ADS7818P datasheet pdf ADS7818P specifications ADS7818P 500 kSPS ADS7818P 2.5 V reference Texas Instruments ADS7818P ADS7818P PDIP ADC ADS7818P sensor measurement ADS7818P vs ADS7818PG4 ADS7818P drop-in replacement ADS7818P equivalent ADC ADS7818P application circuit ADS7818P price ADS7818P stock and lead time

Related Components & Terms

Texas Instruments ADS7818P ADS7818PG4 12-bit ADC successive-approximation ADC SAR ADC sampling analog-to-digital converter sample-and-hold circuit internal voltage reference 2.5 V reference 500 kSPS synchronous serial interface 8-pin PDIP PDIP package family through-hole surface-mount-compatible package analog-to-digital conversion RoHS REACH industrial instrumentation sensor measurement power-down mode
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details