ADS7818P - 12-Bit 500 kSPS SAR ADC | Texas Instruments
料号: ADS7818P ✓ 量产中ADS7818P 概述
A sampling ADC is a type of analog-to-digital converter that acquires an input voltage, holds that voltage during conversion, and converts it into a digital code. The ADS7818P belongs to the successive-approximation, or SAR, ADC family, which uses a comparator and internal DAC to determine each output bit through a sequence of binary trials. SAR converters are widely used when moderate resolution, predictable conversion timing, low power consumption, and compact serial-interface implementation are more important than maximum conversion speed.
The main features of the ADS7818P are its 12-bit resolution, 500 kSPS sampling throughput, internal 2.5 V reference, and low-power operation. The 0 V to 5 V input range allows the converter to use the internal reference directly without an external reference circuit. The synchronous serial interface supports straightforward connection to microcontrollers, DSPs, and other digital controllers while reducing the number of external pins. The 11 mW typical operating dissipation supports efficient data-acquisition designs, while the 2.5 mW power-down specification helps reduce consumption when measurements are intermittent.
The ADS7818P is suitable for industrial process monitoring, sensor instrumentation, portable data loggers, and embedded measurement systems. Its internal reference improves portability by reducing external component count and avoiding reference-routing errors. The 500 kSPS throughput is adequate for many pressure, temperature, position, and level sensing systems that require regular updates rather than high-frequency waveform capture. The 8-pin PDIP package also simplifies prototyping and through-hole assembly.
When designing the analog input path, keep the source impedance and settling time compatible with the ADC acquisition interval. Place the input and reference bypass capacitors close to their associated pins, keep the analog trace short, and route the synchronous clock and data lines away from sensitive input wiring. Use the power-down control when the measurement system operates intermittently, and account for the reference accuracy when establishing the overall measurement uncertainty.
This page provides a structured technical overview of the ADS7818P, including its operating characteristics, practical application guidance, packaging information, and design considerations. It also distinguishes the device from related ADS7818 package and ordering variants so engineers can identify the correct part for a new PCB or an existing design.
直接替换替代料: ADS7818P ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: ADS7818P (相同外形与封装尺寸) ——差异在于 Architecture, Operating Temperature, Package, Resolution.
ADS7818PG4
✅ 直接替换📋 参考替代料(不在目录中)
ADS7818P 最大额定值与电气特性
| Converter Type | 12-bit successive-approximation sampling ADC |
| Input Channels | 1 |
| Throughput Rate | 500 kSPS |
| Input Range | 0 V to 5 V |
| Internal Reference Voltage | 2.5 V |
| Reference Relationship | Input range equals zero to twice the reference voltage |
| Typical Power Dissipation | 11 mW at 500 kSPS |
| Power-Down Power Dissipation | 2.5 mW |
| 接口 | Synchronous serial interface |
| Sample-and-Hold Circuit | Integrated |
| 封装 | 8-pin PDIP |
| 安装类型 | Through-hole |
| Temperature Grade | Industrial |
| Terminal Count | 8 |
| Input Architecture | Single-ended unipolar input |
| Digital Output | 12-bit |
| Power-Down Mode | Yes |
| Manufacturer Product Page | https://www.ti.com/product/ADS7818 |
ADS7818P 8-pin pdip 引脚配置指南
ADS7818P(8-pin pdip 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。
暂无详细引脚数据: ADS7818P.
请参阅 数据手册 以查看完整引脚配置。
典型应用
ADS7818P 适用于 6 应用s: Industrial Sensor Measurement, Battery-Powered Data Logging, Process Control Monitoring, Embedded Control Systems, Test and Measurement Instruments, Educational and Prototype Circuits.
Industrial Sensor Measurement
The ADS7818P fits industrial sensor interfaces that require regular conversion of pressure, temperature, level, or position signals. Its 12-bit resolution provides 4096 discrete codes over the 0 V to 5 V input range, while the 500 kSPS throughput allows the controller to refresh measurements rapidly. The internal 2.5 V reference reduces external analog circuitry, and the 8-pin PDIP package simplifies through-hole prototyping. For reliable operation, condition the sensor output so it remains within the unipolar input range and account for source settling time before the sample-and-hold acquisition window.
推荐
Battery-Powered Data Logging
ADS7818P is useful in portable data loggers where measured analog signals must be captured without a large external reference circuit. The manufacturer datasheet reports typical dissipation of 11 mW at 500 kSPS and 2.5 mW in power-down mode, allowing the controller to activate the converter only during scheduled measurements. Its 12-bit resolution supports moderate-resolution environmental and asset monitoring. Battery life still depends on the MCU sleep strategy, sensor current, regulator quiescent current, and the number of conversions performed during each wake cycle.
推荐
Process Control Monitoring
The ADS7818P can digitize slow or moderate-speed process variables for supervisory control loops, panel instruments, and factory monitoring nodes. A 500 kSPS converter is substantially faster than the update rate of most temperature, pressure, and flow sensors, while the 0 V to 5 V input range maps naturally to many industrial signal-conditioning outputs. The internal 2.5 V reference supports compact two-rail circuitry. Engineers should verify the complete signal path against the ADC acquisition requirements and isolate high-energy or noisy factory wiring from the analog input.
推荐
Embedded Control Systems
ADS7818P is appropriate for embedded controllers that periodically read analog sensors through a compact synchronous serial interface. The 8-pin PDIP package provides an accessible prototype footprint, while the interface allows data transfer to a microcontroller, DSP, or programmable logic controller. Its 12-bit result provides more detail than an 8-bit converter and remains suitable for many feedback and status measurements. Firmware should initiate conversion and clock the result according to the timing diagram in the Texas Instruments ADS7818 manufacturer datasheet, and the PCB should keep clock traces away from the analog input.
推荐
Test and Measurement Instruments
The ADS7818P can serve as the ADC in bench instruments, signal-conditioner prototypes, and automated test fixtures requiring a compact 12-bit measurement channel. Its 500 kSPS throughput supports rapid acquisition while the internal reference simplifies calibration and reduces the number of sensitive external components. For instrumentation-grade results, characterize offset, gain, reference error, noise, and input settling in the complete board rather than relying only on the nominal converter resolution. Keep the analog path short and provide stable supply and reference bypassing near the device.
推荐
Educational and Prototype Circuits
The ADS7818P is well suited to university laboratories and prototype boards because it combines 12-bit conversion, a 500 kSPS rate, an internal 2.5 V reference, and a through-hole 8-pin package. Students can connect an analog source, drive the synchronous interface from a microcontroller, and visualize code conversion without building an external reference network. The accessible package also simplifies probing and rework. For repeatable results, include calibration points, isolate the analog source from switching supplies, and follow the datasheet timing sequence for chip select, clock, and data readout.
推荐
推荐产品汇总
工程参考数据: ADS7818P ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | ADS7818PG4 |
|---|---|---|
| Package | 8-pin PDIP | 8-pin PDIP |
| Brand | Texas Instruments | Texas Instruments |
| Resolution | 12 bit | 12 bit |
| Converter Architecture | Successive-approximation sampling ADC | Successive-approximation sampling ADC |
| Throughput Rate | 500 kSPS | 500 kSPS |
| Input Channels | 1 | 1 |
| Input Range | 0 V to 5 V | 0 V to 5 V |
| Internal Reference | 2.5 V | 2.5 V |
| Typical Operating Power | 11 mW at 500 kSPS | 11 mW at 500 kSPS |
| Power-Down Power | 2.5 mW | 2.5 mW |
关键差异点
- Integrated reference reduces external analog components (对比 ADS7818PG4)
- Direct 500 kSPS measurement throughput (对比 ADS7818PG4)
- Low-power operation supports intermittent acquisition (对比 ADS7818PG4)
设计说明
Place the ADS7818P input and reference bypass capacitors close to their corresponding pins, and keep the analog input trace short. Route the synchronous clock and data lines away from the analog input to reduce coupling from digital switching activity. A quiet ground-return path beneath the analog section and a clear separation between the ADC and switching regulators or relay drivers help preserve conversion accuracy.
Use power-down mode whenever the acquisition sequence allows the converter to remain inactive between measurements. The Texas Instruments ADS7818 manufacturer datasheet reports typical dissipation of 11 mW at 500 kSPS and 2.5 mW in power-down mode. Account for supply current, digital-interface activity, and external sensor power when estimating the complete acquisition subsystem's energy use.
Do not assume that the nominal 12-bit resolution equals 12 bits of usable system accuracy. Reference error, comparator noise, source impedance, acquisition settling, supply variation, and PCB leakage all contribute to total uncertainty. Drive the input from a low-impedance source, allow the required settling interval, and calibrate the assembled board if measurement precision is important.
Keep the analog input path away from high-current switching nodes and keep the serial interface routing away from the input and reference pins. Use a compact ground return around the converter and avoid long traces that act as antennae. When replacing ADS7818P with ADS7818PG4, preserve the 8-pin PDIP footprint and verify the pin assignment, orientation, temperature grade, and ordering requirements before releasing the PCB revision.
合规信息
The manufacturer product page and datasheet identify the ADS7818 family, but the listed web sources do not provide explicit compliance declarations for the ADS7818P orderable.