ADS7822PC - 12-Bit 200kSPS SAR ADC | Texas Instruments
MPN: ADS7822PC ✓ ActiveADS7822PC Overview
A sampling ADC is a data-converter category that acquires an analog voltage, samples it onto an internal node, and converts the held voltage into a digital code. A successive-approximation-register ADC, commonly abbreviated SAR ADC, determines the digital result one bit at a time during each conversion. Within the broader semiconductor hierarchy, the ADS7822PC is an analog-to-digital converter, interface IC, and power-sensitive data-acquisition component.
The primary functional characteristics are 12-bit resolution, one analog input, SAR conversion, a maximum sampling rate of 200kSPS, and a 2.7V to 5.25V operating supply range. These characteristics make the device suitable for industrial measurement, control, instrumentation, and embedded systems that need moderate-resolution conversion without the power demand of a high-speed data converter. The single analog input also simplifies PCB routing compared with a multiplexed multi-channel converter.
The 8-PDIP package provides a straightforward through-hole implementation for prototypes, legacy control systems, test equipment, and designs assembled by manual insertion. Its pin count keeps the interface compact, while the parallel digital interface provides a direct connection to suitable microcontrollers, programmable logic, or digital interface hardware. Designers should account for the ADC's reference, supply, analog-ground, digital-ground, and digital-output requirements when assigning PCB tracks.
Typical uses include digitizing a conditioned sensor signal in an industrial controller, sampling a potentiometer or divider in an embedded instrument, monitoring a low-frequency analog process variable, and capturing control feedback in laboratory equipment. The 200kSPS rate gives designers temporal margin for multiplexed analog conditioning and digital filtering, although system timing must remain compatible with the converter's serial or parallel control signals and acquisition sequence.
The primary design consideration is that the analog input must remain within the converter's valid input range and that the supply and reference circuitry must be kept stable. Use careful grounding and short analog traces so switching activity on digital outputs does not disturb the sampled voltage. Confirm acquisition timing, output coding, and operating limits against the manufacturer datasheet before fixing the PCB layout.
This page combines the confirmed converter specifications, package information, application guidance, selection trade-offs, and verified source links into a practical engineering reference for the ADS7822PC. It also distinguishes confirmed characteristics from parameters that require confirmation from the manufacturer datasheet.
Drop-in alternatives for ADS7822PC — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
ADS7822IP
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
ADS7822IPC
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
ADS7822PC Maximum Ratings & Electrical Characteristics
| ADC Type | Sampling analog-to-digital converter |
| Architecture | Successive-approximation register (SAR) |
| Resolution | 12 bit |
| Analog Input Count | 1 input |
| Maximum Sampling Rate | 200kSPS |
| Operating Supply Range | 2.7V to 5.25V |
| Package | 8-PDIP |
| Mounting Type | Through-hole |
| Power Class | MicroPower |
| Full-Rate Power Behavior | Low power operation at the full 200kSPS rate |
ADS7822PC 8-pdip Pin Configuration Guide
Pin configuration for ADS7822PC (8-pdip package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.
No detailed pinout data available for ADS7822PC.
Refer to the datasheet for full pin configuration.
Typical Applications
ADS7822PC is suitable for 6 applications: Industrial Sensor Signal Acquisition, Embedded Potentiometer Control, Laboratory Instrumentation, Process Control Feedback, Power Supply Monitoring, Data Acquisition and Test Equipment.
Industrial Sensor Signal Acquisition
The ADS7822PC fits industrial measurement systems that digitize a conditioned sensor output where moderate resolution and rapid conversion are sufficient. Its 12-bit resolution provides 4096 code levels, while the 200kSPS maximum rate supports acquisition rates far above ordinary process-sensor bandwidth requirements. The converter operates from 2.7V to 5.25V, allowing use in both 3.3V and 5V control equipment. Place the ADC close to the analog front end, maintain a stable supply, and verify the input range, reference arrangement, and acquisition timing from the manufacturer datasheet.
Embedded Potentiometer Control
The ADS7822PC can convert a potentiometer or resistive-divider position into a 12-bit digital value for an embedded controller. One analog channel and the 200kSPS sampling capability provide ample timing margin for operator controls, calibration interfaces, and automatic equipment settings. The 2.7V to 5.25V operating range supports common embedded rails, but the divider voltage must be constrained to the confirmed analog-input range. Add input filtering and limit network current, then validate code monotonicity and endpoint calibration in the completed circuit.
Laboratory Instrumentation
The ADS7822PC is appropriate for compact laboratory instruments requiring a straightforward single-channel digitizer rather than a high-resolution converter. A 12-bit result gives useful measurement granularity for calibration, status monitoring, and slowly changing laboratory signals, and the microPower operating behavior remains useful in portable or intermittently powered equipment. The 8-PDIP package also simplifies prototype construction and repair. Confirm reference stability, input bandwidth, conversion timing, and temperature limits in the datasheet before specifying accuracy for a calibrated measurement channel.
Process Control Feedback
The ADS7822PC can serve as the feedback ADC in a closed-loop industrial or machine-control design when the monitored variable requires 12-bit resolution rather than higher precision. Its 200kSPS conversion capability leaves timing margin for filtering and digital processing, and the single-input architecture avoids unnecessary multiplexing in the measurement path. Use the ADC on a clean analog supply and route return current away from the input and reference pins. The complete control loop must also account for propagation delay, filtering, and the converter's acquisition requirements.
Power Supply Monitoring
The ADS7822PC is suitable for monitoring a scaled power-rail voltage in supervisory, battery-management, or board-level protection circuitry. Its 12-bit resolution can represent a divided voltage across 4096 steps, and the 200kSPS rate supports faster sampling than many slow power-supply monitoring loops require. Operation from 2.7V to 5.25V simplifies integration with common controller rails. Design the divider so the monitored range maps into the confirmed input range, include filtering for switching ripple, and protect the input during fault conditions.
Data Acquisition and Test Equipment
The ADS7822PC supports compact data-acquisition and test-equipment front ends that require one analog channel, low converter power, and a straightforward through-hole package. The 12-bit resolution is suitable for diagnostic, calibration, and status measurements, while the 200kSPS rate allows acquisition of faster events than a basic slow ADC. The 8-PDIP package assists prototype construction and legacy repair. For precision instruments, validate reference drift, input impedance, noise, linearity, and calibration stability rather than relying on nominal resolution alone.
Engineering reference data for ADS7822PC — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | ADS7822IP | ADS7822IPC |
|---|---|---|---|
| Package | 8-PDIP | 8-PDIP | 8-PDIP |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Resolution | 12 bit | 12 bit | 12 bit |
| Maximum Sampling Rate | 200kSPS | 200kSPS | 200kSPS |
| Operating Supply Range | 2.7V to 5.25V | 2.7V to 5.25V | 2.7V to 5.25V |
| Architecture | SAR sampling ADC | SAR sampling ADC | SAR sampling ADC |
| Analog Input Count | 1 input | 1 input | 1 input |
| Ordering-Code Difference | PC ordering code | IP ordering code; temperature grade must be confirmed | IPC ordering code; commercial temperature grade must be confirmed |
| Power Class | MicroPower | MicroPower | MicroPower |
| Mounting Type | Through-hole | Through-hole | Through-hole |
Key Differentiators
- Single-channel 12-bit SAR conversion at a 200kSPS maximum rate (vs AD7822)
- Operation from 2.7V to 5.25V (vs ADS7822IPC)
- Compact 8-PDIP interface (vs ADS7822IP)
Design Notes
Keep the analog input, reference, and ground connections short and place the required bypass capacitors close to their corresponding device pins. Route the analog signal away from digital output and clock traces, especially when the source impedance is high. Confirm the pin names, recommended capacitor values, and maximum acquisition time from the Texas Instruments ADS7822 datasheet before finalizing the PCB artwork.
Do not treat the 200kSPS rating as permission to run conversion cycles without observing the complete acquisition and output timing sequence. The external host must issue control signals correctly, allow the acquisition interval to settle, and read the resulting code without clocking out of sequence. Validate timing with a scope or logic analyzer during prototype bring-up because incorrect control sequencing can produce apparently plausible but invalid samples.
For a resistive sensor or divider, calculate the source impedance and acquisition charge requirement rather than assuming that every input source can drive the sampling capacitor instantaneously. Place an appropriate charge reservoir capacitor at the input when the source impedance is high, and retain the capacitor's stability and leakage characteristics. This prevents incomplete conversion and improves repeatability in precision or high-impedance measurements.
Compliance Information
Compliance status was not stated on the manufacturer product page or in the available distributor search results. Do not infer RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status without a current manufacturer declaration.