ADS1286PA - 12-Bit, 37 kSPS Low-Power ADC | Texas Instruments
MPN: ADS1286PA ✓ ActiveADS1286PA Overview
An ADC is an analog-to-digital converter, a semiconductor that samples a continuous voltage and converts it into a digital code for processing. The ADS1286 belongs to the sampling ADC and SAR ADC hierarchy, where successive approximation rounds the input voltage during each conversion. Its differential architecture measures the voltage between two analog inputs, improving rejection of common-mode interference when the signal source is balanced.
Key characteristics include 12-bit resolution, a 37 kS/s conversion rate, and a nominal supply current of 250 µA. The converter offers 90 dB of spurious-free dynamic range, 1 LSB differential nonlinearity, and 2 LSB integral nonlinearity. Its SPI and SSI-compatible serial interface supports two-wire or three-wire communication, reducing the number of connections required in remote and distributed sensing equipment.
The sampling architecture captures the analog input before conversion, while the internal sample-and-hold amplifier isolates the source during successive approximation. Differential input handling is useful for bridge sensors, instrumentation signals, and other systems in which common-mode noise can obscure a low-level signal. The 8-PDIP package is suitable for through-hole prototyping, educational instruments, and legacy industrial control systems where a surface-mount footprint is unnecessary.
Typical applications include battery-powered portable instruments, pressure and temperature monitoring, industrial sensor interfaces, laboratory measurement equipment, and low-power remote data-acquisition nodes. The 250 µA nominal current and 4.5 V to 5.25 V supply range are particularly useful when system power is constrained and a regulated 5 V rail is already available.
When designing around the ADS1286PA, preserve the input voltage range, provide a stable reference, and route the differential input pair symmetrically to minimize pickup from nearby switching circuitry. Input filtering, reference bypassing, and a quiet grounding strategy are central to achieving the converter's specified linearity and dynamic-range performance.
This page organizes the principal electrical specifications, application guidance, package information, and verified substitute constraints for ADS1286PA. It also distinguishes true pin-compatible replacements from related devices that require a different footprint, helping engineers shorten component-selection and board-layout work without overlooking package-level compatibility.
Drop-in alternatives for ADS1286PA — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
No drop-in alternatives available for this product.
Request AlternativesADS1286PA Maximum Ratings & Electrical Characteristics
| Resolution | 12 bit |
| Conversion Rate | 37 kS/s |
| Architecture | 1-input SAR ADC |
| Input Type | Differential |
| Supply Voltage Range | 4.5 V to 5.25 V |
| Nominal Supply Current | 250 µA |
| Serial Interface | SPI or SSI compatible |
| Spurious-Free Dynamic Range | 90 dB |
| Differential Nonlinearity | 1 LSB |
| Integral Nonlinearity | 2 LSB |
| Sample-and-Hold Amplifier | Integrated |
| Package | 8-PDIP |
| Package Contact Finish | Gold contact |
| Operating Temperature Range | -40 °C to +85 °C |
| Number of Analog Inputs | 1 differential input |
ADS1286PA gold contact Pin Configuration Guide
Pin configuration for ADS1286PA (gold contact package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.
No detailed pinout data available for ADS1286PA.
Refer to the datasheet for full pin configuration.
Typical Applications
ADS1286PA is suitable for 6 applications: Industrial Sensor Interfaces, Battery-Powered Measurement Instruments, Remote Environmental Monitoring, Laboratory Instrumentation, Pressure and Load Measurement, Legacy Control-System Data Acquisition.
Industrial Sensor Interfaces
The ADS1286PA fits industrial sensor interfaces that need differential signal acquisition at a controlled power level. Its 12-bit resolution and 37 kS/s conversion rate suit temperature, pressure, position, and process-variable measurements, while differential input helps reject common-mode voltage present on long sensor wiring. The 250 µA nominal supply current is useful in distributed measurement nodes, although a regulated 4.5 V to 5.25 V rail is required. Pair the ADC with a low-noise reference, an instrumentation front end, and symmetrical input routing. Check the analog input range and reference requirements against the sensor output before finalizing the signal chain.
Recommended
Battery-Powered Measurement Instruments
The ADS1286PA is useful in battery-powered measurement instruments where low converter consumption and compact digital communication matter. Its nominal 250 µA supply current supports longer operating intervals, and the 37 kS/s conversion rate is sufficient for many slowly changing sensor signals. The 4.5 V to 5.25 V single-supply requirement means the instrument needs an appropriate regulator or boost stage. Use the SPI or SSI-compatible interface to connect the ADC to a low-power controller, and define power states so the converter and interface do not consume energy during idle periods.
Recommended
Remote Environmental Monitoring
The ADS1286PA supports remote environmental-monitoring systems that measure low-level signals from distributed temperature, humidity, gas, or soil sensors. Differential input can reduce the effect of common-mode noise encountered along long cable runs, while the 12-bit resolution provides 4096 digital codes for each conversion. The 37 kS/s rate allows periodic readings without requiring a high-speed ADC. Design the enclosure and cable entry to minimize EMI pickup, use a quiet reference, and power the device from a filtered 4.5 V to 5.25 V rail. A microcontroller can use the serial interface to timestamp and process each measurement.
Recommended
Laboratory Instrumentation
The ADS1286PA is appropriate for compact laboratory instrumentation that captures slow analog waveforms or sensor outputs with modest resolution. Its 37 kS/s throughput and integrated sample-and-hold amplifier allow the converter to acquire successive measurements without requiring a separate acquisition front end. The 90 dB spurious-free dynamic range is useful when the measured signal must remain distinguishable from noise and distortion. For precision-oriented instruments, verify the reference stability, input bandwidth, and acquisition timing. A through-hole 8-PDIP package also simplifies prototype construction and allows straightforward replacement during laboratory development.
Recommended
Pressure and Load Measurement
The ADS1286PA can digitize outputs from bridge-based pressure, load, and force sensors when the excitation and input range are properly conditioned. Differential measurement reduces sensitivity to supply and ground variations that affect both bridge nodes similarly. Its 12-bit resolution and 37 kS/s rate are suitable for many static or slowly changing physical measurements. Use a regulated bridge excitation and low-noise instrumentation amplifier, and ensure the analog inputs remain within their allowed range under maximum sensor imbalance and fault conditions. Calibration can map the digital codes to engineering units after offset, gain, and nonlinearity compensation.
Recommended
Legacy Control-System Data Acquisition
The ADS1286PA fits legacy industrial control and data-acquisition boards that use through-hole components and require a straightforward serial ADC upgrade path. The 8-PDIP package supports conventional PCB assembly, while the SPI or SSI-compatible interface allows connection to existing microcontrollers or programmable logic. At 37 kS/s, the converter handles general process monitoring rather than high-frequency waveform analysis. A careful migration should confirm the logic levels, clock timing, reference arrangement, and analog input range. Because the device uses a 4.5 V to 5.25 V supply, existing 3.3 V control systems may need level translation or a separate analog supply domain.
Recommended
Recommended Products Summary
Engineering reference data for ADS1286PA — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product |
|---|---|
| Package | 8-PDIP |
| Brand | Texas Instruments |
| Resolution | 12 bit |
| Conversion Rate | 37 kS/s |
| Architecture | 1-input SAR ADC |
| Input Configuration | Differential |
| Supply Voltage Range | 4.5 V to 5.25 V |
| Nominal Supply Current | 250 µA |
| Serial Interface | SPI or SSI compatible |
| Spurious-Free Dynamic Range | 90 dB |
| Differential Nonlinearity | 1 LSB |
| Integral Nonlinearity | 2 LSB |
Key Differentiators
- Low-power differential conversion in a through-hole package (vs ADS1286PB)
- Sampling performance for precision-oriented acquisition (vs ADS1286UA/2K5)
- Direct fit for through-hole industrial and prototype boards (vs ADS1286PB)
Design Notes
Route the ADS1286PA differential input pair symmetrically and keep it away from the SPI clock, switching-node traces, and high-current return paths. A continuous ground plane beneath the pair can reduce differential coupling, but avoid interrupting that plane with high-impedance routing. Place the input protection network and anti-alias filter close to pins 1 and 2 so that switching transients are attenuated before reaching the sample-and-hold amplifier.
Operate the converter from a clean 4.5 V to 5.25 V supply and decouple the supply pins with local high-frequency bypass capacitance. Keep analog and digital return currents separated until they join at the device ground connection, particularly when the SPI controller is located far from the ADC. Since the nominal supply current is 250 µA, cable resistance and long supply traces can create measurable voltage offsets in distributed systems.
Do not substitute a surface-mount member of the ADS1286 family without redesigning the PCB footprint. Package compatibility is determined by physical lead spacing, row geometry, pin numbering, and pin functions; identical resolution and conversion rate alone do not establish drop-in status. Also verify the analog input range, reference connection, and logic levels before replacing ADS1286PA on an existing assembly.
Choose the input filter according to the required bandwidth rather than only the maximum conversion rate. At 37 kS/s, an unnecessarily wide bandwidth admits more out-of-band noise into the sample-and-hold amplifier and can degrade spurious-free performance. Use the manufacturer datasheet for acquisition timing and test the completed layout with the intended source impedance, cable length, reference arrangement, and system clock.
Compliance Information
RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not stated in the cited product information. AEC-Q100 qualification is not applicable to the identified industrial ADC ordering configuration.