ADS7846AN - 12-Bit 4-Wire Touch Controller | Texas Instruments
MPN: ADS7846AN ✓ ActiveADS7846AN Overview
A 4-wire resistive touch-screen controller is an interface IC that measures voltage from the X and Y resistive layers of a pressure-sensitive panel and converts those measurements into digital values for a host processor. Within the product hierarchy, the ADS7846AN is a touch-screen controller, analog interface IC, and semiconductor. It connects a resistive panel to an embedded system while allowing the controller to handle excitation, measurement, conversion, and serial communication.
The principal features include a 12-bit conversion result, selectable SPI-compatible serial interfaces, a maximum clock rate of 125 kHz, integrated touch-panel drivers, and low power consumption for portable equipment. The 2.2 V to 5.25 V operating range allows the controller to work with both 3.3 V and 5 V host systems. Its low 0.75 mW typical power figure at 2.7 V with the reference disabled is particularly useful when the panel is not continuously active.
The controller samples the four resistive touch-panel connections by driving paired panel inputs and measuring the resulting analog voltage with an internal converter. The digital result is transferred through a serial interface to the embedded host, which converts the X and Y measurements into a touch position. The manufacturer identifies Microwire, QSPI, and SPI communication as available interfaces for the ADS7846AN, allowing it to connect to a broad range of embedded processors and microcontrollers.
Typical uses include resistive touch panels in personal digital assistants, pagers, cellular phones, portable instruments, industrial terminals, and compact control panels. A battery-powered product benefits from the low-power operating mode, while the 125 kHz clock capability supports repeated sampling when rapid position tracking is needed. Firmware must implement debouncing, calibration, and coordinate interpretation after receiving the controller's digital measurements.
For PCB implementation, place the touch-panel connector and analog input routing away from noisy switching nodes and digital return currents. Use a clean ground reference, keep the serial clock and data traces short, and follow the manufacturer datasheet's recommended capacitance and layout guidance. Confirm the exact package drawing and pin assignments for the ordering code before releasing artwork.
This product page combines the manufacturer specifications, interface characteristics, verified ordering information, package details, and practical selection guidance for the ADS7846AN. It also organizes pin-compatible family options and design considerations so engineers can evaluate the controller before beginning a new touch-interface PCB layout.
Drop-in alternatives for ADS7846AN — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
ADS7843N
✅ Drop-In📋 Reference alternative (not in catalog)
ADS7844Y
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
ADS7845Y
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
ADS7846Y
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
ADS7846AN Specifications
| Product Type | 4-wire resistive touch-screen controller |
| Converter Resolution | 12 bit |
| Supported Touch Panel Type | 4-wire resistive |
| Serial Interfaces | Microwire, QSPI, and SPI |
| Supply Voltage Range | 2.2 V to 5.25 V |
| Operating Temperature Range | -40 °C to 85 °C |
| Maximum Clock Rate | 125 kHz |
| Typical Power Consumption | <0.75 mW at 2.7 V with reference off |
| Integrated Features | On-chip touch-screen drivers |
| Target Package | 16-pin TSSOP |
| Mounting Type | Surface mount |
| Battery Measurement Support | Supported by the ADS7846 family |
| Temperature Measurement Support | Supported by the ADS7846 family |
ADS7846AN 16-pin tssop Pin Configuration Guide
Pin configuration for ADS7846AN (16-pin tssop package). Pin numbering, functions, and connection diagrams are defined in the manufacturer datasheet. Refer to it for the exact footprint and soldering guidelines.
No detailed pinout data available for ADS7846AN.
Refer to the datasheet for full pin configuration.
Typical Applications
ADS7846AN is suitable for 6 applications: Portable Touch-Screen Terminal, Industrial HMI Panel, Battery-Powered Handheld Device, Cellular Phone Touch Interface, Portable Test Instrument, PDA-Style Data Entry Device.
Portable Touch-Screen Terminal
The ADS7846AN suits portable equipment that uses a 4-wire resistive panel and operates from a 2.2 V to 5.25 V supply. Its 12-bit interface supports readable X and Y measurements, while Microwire, QSPI, and SPI connectivity allows the controller to work with different embedded host serial peripherals. Typical power consumption below 0.75 mW at 2.7 V with the reference disabled helps preserve battery life when touch input is only sampled intermittently. The design should include panel calibration, touch-debounce firmware, and a layout that keeps the touch connector away from high-current switching paths.
Recommended
Industrial HMI Panel
The ADS7846AN can serve as the input interface for an industrial human-machine interface built around a 4-wire resistive display. Its 12-bit conversion resolution provides the measurement granularity required for cursor placement and calibration, while the 125 kHz maximum clock rate supports repeated panel sampling. The 2.2 V to 5.25 V supply range accommodates both 3.3 V and 5 V embedded platforms. For an industrial enclosure, protect the touch connector against contamination and ESD, and keep the analog panel traces away from motor-control and switching-supply nodes to preserve measurement stability.
Recommended
Battery-Powered Handheld Device
A battery-powered handheld benefits from the ADS7846AN because its typical consumption is below 0.75 mW at 2.7 V when the internal reference is off. The controller can remain inactive between touch events and be awakened by the host when a panel scan is required. Its 12-bit conversion result and serial interface reduce the need for external analog-to-digital circuitry. Firmware should disable unneeded functions, schedule panel scans efficiently, and use averaged measurements where battery life is more important than instantaneous cursor latency.
Recommended
Cellular Phone Touch Interface
The ADS7846AN was designed for portable equipment including cellular phones, making it appropriate for a resistive touch interface in a compact mobile design. The 16-pin TSSOP helps limit board area, and the selectable Microwire, QSPI, and SPI interfaces support host processors with different serial peripherals. Operation from 2.2 V to 5.25 V allows integration with low-voltage system rails. Board planning should prioritize short analog panel routes, a low-impedance ground reference, and careful separation from RF clocks, display converters, and high-current charging paths.
Recommended
Portable Test Instrument
The ADS7846AN can add a front-panel touch input to a portable measurement instrument. Its 12-bit touch conversion is suitable for menu navigation and parameter selection, while the 125 kHz clock capability allows repeated measurements when a smoother response is needed. The low-power characteristic at 2.7 V with the reference disabled supports longer operation between charges. To obtain repeatable readings, calibrate the panel over its full temperature range, reject samples during finger movement, and route the panel interface away from high-impedance measurement inputs that could be disturbed by the touch excitation.
Recommended
PDA-Style Data Entry Device
The ADS7846AN is suited to PDA-style devices because the manufacturer identifies personal digital assistants and pagers as target applications for the controller family. A 4-wire resistive panel provides straightforward pen or finger input, and the 12-bit results support cursor navigation, handwriting-style input, and on-screen selection. Microwire, QSPI, and SPI interfaces provide flexibility in host selection, while operation down to 2.2 V supports compact portable power systems. Firmware must implement coordinate calibration, edge compensation, and debouncing before passing final touch coordinates to the application.
Recommended
Recommended Products Summary
Engineering reference data for ADS7846AN — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | ADS7843N | ADS7844Y | ADS7845Y | ADS7846Y |
|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | TSSOP-16 | TSSOP-16 | SSOP-16 | SSOP-16 | SSOP-16 |
| Product Type | 4-wire resistive touch-screen controller | 4-wire resistive touch-screen controller | 4-wire resistive touch-screen controller | 4-wire resistive touch-screen controller | 4-wire resistive touch-screen controller |
Key Differentiators
- Supports three host serial protocols in one controller (vs ADS7843N)
- Adds battery and temperature measurement functions (vs ADS7843N)
- Supports low-power portable operation (vs ADS7844Y)
- Provides a 125 kHz maximum clock rate (vs ADS7845Y)
Design Notes
Route the four touch-panel connections as a compact analog input group and connect them to the controller with minimal trace length and no stubs. Keep switching-regulator paths, high-current return lines, and fast digital clocks away from the panel connector and input traces. Use a continuous ground plane beneath the analog section and follow the manufacturer layout recommendation for decoupling placement.
Treat the touch interface as an analog measurement path rather than a conventional digital sensor bus. Place the controller close to the panel connector, use short and properly referenced traces, and avoid splitting the ground plane beneath the analog inputs. If the cable between the panel and PCB is long, evaluate the added capacitance against the recommended input network before applying the datasheet example values.
Do not assume that a family member is interchangeable solely because its conversion resolution and protocol are similar. Confirm the exact package drawing, pin names, supply limits, interface timing, and shutdown behavior for each ordering code. The ADS7846 is documented as 100% pin-compatible with the ADS7843, but added family features can still require software changes and board-level validation.
Decouple the controller supply close to its supply and ground pins, and route high-current return currents away from the touch measurement reference. For battery-operated equipment, use the low-power operating mode and disable functions that are not required between touch scans. Verify startup, shutdown, and wake behavior at the actual supply range because the measured panel readings depend on stable excitation and reference voltage.
Compliance Information
The ADS7846AN is an interface IC rather than an automotive-qualified device. No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was found in the manufacturer and distributor information accessed for this product.