Texas Instruments

ADS7846AN - 12-Bit 4-Wire Touch Controller | Texas Instruments

MPN: ADS7846AN ✓ सक्रिय
2.2 V to 5.25 V Vdss 16-pin TSSOP Package 125 kHz Speed
न्यूनतम ऑर्डर मात्रा: 1 |

ADS7846AN अवलोकन

Texas Instruments ADS7846AN is a 12-bit, 4-wire resistive touch-screen controller with Microwire, QSPI, and SPI interfaces, packaged in a 16-pin TSSOP. It operates from a 2.2 V to 5.25 V supply, supports conversion-clock rates up to 125 kHz, and integrates the drivers required for a resistive touch panel. Typical power consumption is below 0.75 mW at 2.7 V when the internal reference is off.

A 4-wire resistive touch-screen controller is an interface IC that measures voltage from the X and Y resistive layers of a pressure-sensitive panel and converts those measurements into digital values for a host processor. Within the product hierarchy, the ADS7846AN is a touch-screen controller, analog interface IC, and semiconductor. It connects a resistive panel to an embedded system while allowing the controller to handle excitation, measurement, conversion, and serial communication.

The principal features include a 12-bit conversion result, selectable SPI-compatible serial interfaces, a maximum clock rate of 125 kHz, integrated touch-panel drivers, and low power consumption for portable equipment. The 2.2 V to 5.25 V operating range allows the controller to work with both 3.3 V and 5 V host systems. Its low 0.75 mW typical power figure at 2.7 V with the reference disabled is particularly useful when the panel is not continuously active.

The controller samples the four resistive touch-panel connections by driving paired panel inputs and measuring the resulting analog voltage with an internal converter. The digital result is transferred through a serial interface to the embedded host, which converts the X and Y measurements into a touch position. The manufacturer identifies Microwire, QSPI, and SPI communication as available interfaces for the ADS7846AN, allowing it to connect to a broad range of embedded processors and microcontrollers.

Typical uses include resistive touch panels in personal digital assistants, pagers, cellular phones, portable instruments, industrial terminals, and compact control panels. A battery-powered product benefits from the low-power operating mode, while the 125 kHz clock capability supports repeated sampling when rapid position tracking is needed. Firmware must implement debouncing, calibration, and coordinate interpretation after receiving the controller's digital measurements.

For PCB implementation, place the touch-panel connector and analog input routing away from noisy switching nodes and digital return currents. Use a clean ground reference, keep the serial clock and data traces short, and follow the manufacturer datasheet's recommended capacitance and layout guidance. Confirm the exact package drawing and pin assignments for the ordering code before releasing artwork.

This product page combines the manufacturer specifications, interface characteristics, verified ordering information, package details, and practical selection guidance for the ADS7846AN. It also organizes pin-compatible family options and design considerations so engineers can evaluate the controller before beginning a new touch-interface PCB layout.

के लिए ड्रॉप-इन विकल्प ADS7846AN — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

ADS7843N

✅ ड्रॉप-इन
📦 TSSOP-16
Uses the same 4-wire touch interface and 16-pin TSSOP footprint, but the ADS7843 does not provide the ADS7846 family's added battery and temperature measurements

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

ADS7844Y

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
📦 SSOP-16
Uses the same 4-wire resistive touch-controller function but differs in the exact package suffix and conversion feature set

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

ADS7845Y

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
📦 SSOP-16
Shares the same 4-wire resistive touch-controller family and SSOP-16 footprint, but has a different internal feature configuration

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

ADS7846Y

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
📦 SSOP-16
Shares the ADS7846 conversion and interface functions but uses the Y package suffix rather than the AN ordering suffix

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

ADS7846AN विशेषताएं

Product Type 4-wire resistive touch-screen controller
Converter Resolution 12 bit
Supported Touch Panel Type 4-wire resistive
Serial Interfaces Microwire, QSPI, and SPI
Supply Voltage Range 2.2 V to 5.25 V
ऑपरेटिंग तापमान रेंज -40 °C to 85 °C
Maximum Clock Rate 125 kHz
Typical Power Consumption <0.75 mW at 2.7 V with reference off
Integrated Features On-chip touch-screen drivers
Target Package 16-pin TSSOP
माउंटिंग प्रकार Surface mount
Battery Measurement Support Supported by the ADS7846 family
Temperature Measurement Support Supported by the ADS7846 family

ADS7846AN 16-pin tssop पिन कॉन्फ़िगरेशन गाइड

ADS7846AN (16-pin tssop पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।

ADS7846AN के लिए 16-pin tssop पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: ADS7846AN.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

ADS7846AN के लिए उपयुक्त है 6 अनुप्रयोगs: Portable Touch-Screen Terminal, Industrial HMI Panel, Battery-Powered Handheld Device, Cellular Phone Touch Interface, Portable Test Instrument, PDA-Style Data Entry Device.

📱

Portable Touch-Screen Terminal

The ADS7846AN suits portable equipment that uses a 4-wire resistive panel and operates from a 2.2 V to 5.25 V supply. Its 12-bit interface supports readable X and Y measurements, while Microwire, QSPI, and SPI connectivity allows the controller to work with different embedded host serial peripherals. Typical power consumption below 0.75 mW at 2.7 V with the reference disabled helps preserve battery life when touch input is only sampled intermittently. The design should include panel calibration, touch-debounce firmware, and a layout that keeps the touch connector away from high-current switching paths.

🏭

Industrial HMI Panel

The ADS7846AN can serve as the input interface for an industrial human-machine interface built around a 4-wire resistive display. Its 12-bit conversion resolution provides the measurement granularity required for cursor placement and calibration, while the 125 kHz maximum clock rate supports repeated panel sampling. The 2.2 V to 5.25 V supply range accommodates both 3.3 V and 5 V embedded platforms. For an industrial enclosure, protect the touch connector against contamination and ESD, and keep the analog panel traces away from motor-control and switching-supply nodes to preserve measurement stability.

🔋

Battery-Powered Handheld Device

A battery-powered handheld benefits from the ADS7846AN because its typical consumption is below 0.75 mW at 2.7 V when the internal reference is off. The controller can remain inactive between touch events and be awakened by the host when a panel scan is required. Its 12-bit conversion result and serial interface reduce the need for external analog-to-digital circuitry. Firmware should disable unneeded functions, schedule panel scans efficiently, and use averaged measurements where battery life is more important than instantaneous cursor latency.

📱

Cellular Phone Touch Interface

The ADS7846AN was designed for portable equipment including cellular phones, making it appropriate for a resistive touch interface in a compact mobile design. The 16-pin TSSOP helps limit board area, and the selectable Microwire, QSPI, and SPI interfaces support host processors with different serial peripherals. Operation from 2.2 V to 5.25 V allows integration with low-voltage system rails. Board planning should prioritize short analog panel routes, a low-impedance ground reference, and careful separation from RF clocks, display converters, and high-current charging paths.

🔧

Portable Test Instrument

The ADS7846AN can add a front-panel touch input to a portable measurement instrument. Its 12-bit touch conversion is suitable for menu navigation and parameter selection, while the 125 kHz clock capability allows repeated measurements when a smoother response is needed. The low-power characteristic at 2.7 V with the reference disabled supports longer operation between charges. To obtain repeatable readings, calibrate the panel over its full temperature range, reject samples during finger movement, and route the panel interface away from high-impedance measurement inputs that could be disturbed by the touch excitation.

🖥️

PDA-Style Data Entry Device

The ADS7846AN is suited to PDA-style devices because the manufacturer identifies personal digital assistants and pagers as target applications for the controller family. A 4-wire resistive panel provides straightforward pen or finger input, and the 12-bit results support cursor navigation, handwriting-style input, and on-screen selection. Microwire, QSPI, and SPI interfaces provide flexibility in host selection, while operation down to 2.2 V supports compact portable power systems. Firmware must implement coordinate calibration, edge compensation, and debouncing before passing final touch coordinates to the application.

अनुशंसित उत्पादों का सारांश

ADS7843 Pin-compatible 4-wire touch-controller family option उपयोग में: Portable Touch-Screen Terminal, Battery-Powered Handheld Device, Cellular Phone Touch Interface, PDA-Style Data Entry Device TSC2046E Related touch-screen controller discussed for interface replacement उपयोग में: Portable Touch-Screen Terminal, Industrial HMI Panel, Cellular Phone Touch Interface, Portable Test Instrument, PDA-Style Data Entry Device TSC2008 Related touch-screen controller in the same application space उपयोग में: Portable Touch-Screen Terminal, Industrial HMI Panel, Battery-Powered Handheld Device, Portable Test Instrument, PDA-Style Data Entry Device MAX3221IPWR Texas Instruments उपयोग में: Industrial HMI Panel
What is the ADS7846AN?
The ADS7846AN is a Texas Instruments 12-bit, 4-wire resistive touch-screen controller with Microwire, QSPI, and SPI interfaces. It operates from 2.2 V to 5.25 V and is packaged in a 16-pin TSSOP. According to the manufacturer product page, the device integrates the drivers and conversion functions needed to interface a resistive panel with an embedded host processor.
What is the operating voltage of ADS7846AN?
The ADS7846AN operates from 2.2 V to 5.25 V. This range supports common 3.3 V and 5 V embedded systems while allowing the controller to operate from low-voltage power rails. The manufacturer datasheet also identifies a typical power-consumption condition below 0.75 mW at a 2.7 V supply with the reference turned off.
What is the conversion resolution of ADS7846AN?
The ADS7846AN provides 12-bit conversion results for measuring the resistive touch-panel coordinates. The interface result is transferred to the host through one of the supported Microwire, QSPI, or SPI serial protocols. Firmware remains responsible for calibration, filtering, and mapping the measured X and Y values to screen coordinates.
Where can I download the ADS7846AN datasheet PDF?
The official ADS7846 datasheet PDF is available from Texas Instruments at https://www.ti.com/lit/ds/symlink/ads7846.pdf. Use the pin-description table, electrical characteristics, timing diagrams, and application information in that document when assigning PCB connections and validating conversion timing. The official product page at https://www.ti.com/product/ADS7846 provides ordering and support information.
Where can I find the ADS7846AN pinout?
The ADS7846AN pinout is defined in the pin-description table of the official manufacturer datasheet. The verified ordering information identifies the target as a 16-pin TSSOP device. Use the datasheet's package drawing and pin table when assigning panel inputs, reference connections, serial signals, and supply pins rather than relying on another package variant.
What are the key specifications of ADS7846AN that engineers should know?
The ADS7846AN combines a 12-bit converter, a 4-wire resistive touch-panel interface, and Microwire, QSPI, and SPI communication in a 16-pin TSSOP. Its supply range is 2.2 V to 5.25 V, its clock rate can reach 125 kHz, and typical consumption is below 0.75 mW at 2.7 V when the reference is off. The manufacturer datasheet identifies on-chip drivers as a key integration feature.
ADS7846AN vs ADS7843 - which is better for an upgraded design?
The ADS7846 is the better choice for a new design that needs battery measurement and temperature-measurement support because Texas Instruments states that it is 100% pin-compatible with the ADS7843 and fits the same socket. The ADS7843 remains relevant for an existing board, but the ADS7846 adds features that may require software changes. Verify the physical package and pin arrangement for the exact ordering code.
Is ADS7846AN suitable for a resistive touch panel?
Yes, the ADS7846AN is specifically designed for a 4-wire resistive touch panel. Its integrated drivers and 12-bit measurement path provide the interface between the panel electrodes and the host processor. The application still requires suitable panel excitation, calibration, debouncing, and firmware interpretation, and the PCB must follow the manufacturer layout and grounding guidance.
When should I choose ADS7846AN over another 4-wire touch controller?
Choose the ADS7846AN when the design needs a 12-bit 4-wire resistive touch interface, a 2.2 V to 5.25 V operating range, and support for Microwire, QSPI, or SPI communication. It is also appropriate when a family-compatible upgrade from ADS7843 is desired. Choose another controller when capacitive sensing, a different package, or a different host protocol is required.
What can replace ADS7846AN?
The closest documented drop-in family option is the ADS7843 because Texas Instruments states that the ADS7846 is 100% pin-compatible with it and fits the same socket. Compatibility must still be checked against the exact package, electrical ratings, and firmware expectations. The available cross-reference search identifies two replacement manufacturers but does not name qualified MPNs, so no unverified cross-brand substitute should be fitted.
What is the best Analog Devices equivalent for ADS7846AN?
No specific Analog Devices MPN can be confirmed as a drop-in replacement for the ADS7846AN from the available cross-reference information. The search result identifies Analog Devices as a replacement manufacturer but does not provide a part number or establish package and pin compatibility. Use the Request a Quote form on this page when sourcing a proposed substitute, and require the supplier to validate the footprint, interface, voltage range, and conversion performance before approval.
Where can I buy ADS7846AN online?
Use the Request a Quote form on this page to request ADS7846AN availability, current pricing, lot information, and lead time. The verified listings confirm that the part is cataloged as a 16-pin TSSOP touch-screen controller, but they do not print a qualifying quantity-break price table. Requesting a quote keeps the commercial inquiry tied to the exact ADS7846AN ordering code.
What is the price of ADS7846AN?
Current ADS7846AN pricing should be obtained through the Request a Quote form on this page because the verified listings do not provide a qualifying quantity-break table for the exact ordering code. The structured pricing area displays current commercial terms when available. Engineers should quote the exact MPN and required production quantity so the manufacturer, condition, and packaging are matched correctly.
What is the lead time for ADS7846AN?
The current lead time for ADS7846AN should be requested through the Request a Quote form on this page. Lead time can depend on the requested quantity, date code, inspection level, and packaging arrangement. The verified catalog information identifies the component and its interface characteristics, while a quotation response should provide the actionable manufacturing schedule for the specific order.
Is ADS7846AN in stock?
Stock status for the exact ADS7846AN should be confirmed through the Request a Quote form on this page. The verified distributor result states that the component is available for ordering, but it does not expose a complete quantity-break inventory table suitable for publication. Include your required quantity and target date in the request so the available supply can be matched to the production plan.

के लिए इंजीनियरिंग संदर्भ डेटा ADS7846AN — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the ADS7846AN for a new 4-wire resistive touch design that requires a 12-bit controller, a 2.2 V to 5.25 V supply, and support for Microwire, QSPI, or SPI. Its integrated drivers, 125 kHz maximum clock rate, and low-power mode are useful in portable and industrial products, while the family-level battery and temperature measurements can reduce external circuitry. The ADS7843N is the strongest choice when preserving an existing ADS7843 design is more important than accessing those added functions; Texas Instruments states that the ADS7846 is pin-compatible with it. The ADS7844Y and ADS7845Y are useful same-family options only after confirming their exact package, electrical ratings, and touch-interface behavior. No specific cross-brand MPN should be selected without package-level and firmware validation.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद ADS7843N ADS7844Y ADS7845Y ADS7846Y
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package TSSOP-16 TSSOP-16 SSOP-16 SSOP-16 SSOP-16
Product Type 4-wire resistive touch-screen controller 4-wire resistive touch-screen controller 4-wire resistive touch-screen controller 4-wire resistive touch-screen controller 4-wire resistive touch-screen controller

मुख्य विशेषताएँ

  • Supports three host serial protocols in one controller (बनामADS7843N)
  • Adds battery and temperature measurement functions (बनामADS7843N)
  • Supports low-power portable operation (बनामADS7844Y)
  • Provides a 125 kHz maximum clock rate (बनामADS7845Y)

डिज़ाइन नोट्स

Route the four touch-panel connections as a compact analog input group and connect them to the controller with minimal trace length and no stubs. Keep switching-regulator paths, high-current return lines, and fast digital clocks away from the panel connector and input traces. Use a continuous ground plane beneath the analog section and follow the manufacturer layout recommendation for decoupling placement.

Treat the touch interface as an analog measurement path rather than a conventional digital sensor bus. Place the controller close to the panel connector, use short and properly referenced traces, and avoid splitting the ground plane beneath the analog inputs. If the cable between the panel and PCB is long, evaluate the added capacitance against the recommended input network before applying the datasheet example values.

Do not assume that a family member is interchangeable solely because its conversion resolution and protocol are similar. Confirm the exact package drawing, pin names, supply limits, interface timing, and shutdown behavior for each ordering code. The ADS7846 is documented as 100% pin-compatible with the ADS7843, but added family features can still require software changes and board-level validation.

Decouple the controller supply close to its supply and ground pins, and route high-current return currents away from the touch measurement reference. For battery-operated equipment, use the low-power operating mode and disable functions that are not required between touch scans. Verify startup, shutdown, and wake behavior at the actual supply range because the measured panel readings depend on stable excitation and reference voltage.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The ADS7846AN is an interface IC rather than an automotive-qualified device. No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was found in the manufacturer and distributor information accessed for this product.

डेटा सत्यापन तिथि: 2026-11-14 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

ads7846 touchscreen ADS7846AN datasheet ADS7846AN pinout ADS7846AN datasheet pdf ADS7846AN equivalent ADS7846AN replacement ADS7846AN vs ADS7843 ADS7846AN TSSOP-16 pinout ADS7846AN application circuit ADS7846AN price ADS7846AN stock Texas Instruments ADS7846AN

संबंधित कंपोनेंट्स और शब्द

Texas Instruments ADS7846AN ADS7846 ADS7843 ADS7844 ADS7845 TSC2046E TSC2008 4-wire resistive touch-screen controller touch-screen controller interface IC semiconductor 12-bit analog-to-digital conversion Microwire QSPI SPI resistive touch panel TSSOP-16 surface-mount package embedded host processor panel excitation battery measurement temperature measurement low-power touch acquisition
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें