ADSP-21571BSWZ-4 - 450MHz Dual-Core SHARC+ DSP | Analog Devices
MPN: ADSP-21571BSWZ-4 ✓ ActiveADSP-21571BSWZ-4 Overview
A digital signal processor is a specialized semiconductor architecture optimized for arithmetic operations on continuous streams of samples. Unlike a general-purpose microcontroller, which executes sequential control logic, a DSP uses parallel multiply-accumulate resources, dedicated memory paths, and hardware accelerators to complete filtering, Fourier analysis, modulation, and signal-conditioning workloads efficiently. The ADSP-21571 belongs to the SHARC family of SIMD processors, in which multiple data elements can be processed during the same instruction cycle.
The ADSP-21571BSWZ-4 emphasizes parallel fixed- and floating-point computation at a 450 MHz clock. These characteristics suit audio codecs, digital receivers, speech processing, instrumentation, and real-time control loops that require deterministic numerical throughput. Its exposed thermal pad supports improved heat transfer from the processor to the PCB, while the 176-pin surface-mount package exposes the device's parallel external interfaces and dedicated peripheral resources.
Analog Devices groups the ADSP-21571 with its SHARC+ processor portfolio, whose architecture emphasizes SIMD execution and efficient handling of real-time signal data. Designers should map each peripheral, clock, reset, and communication signal to the manufacturer pin-description table before laying out a board. Supply rails require the decoupling network specified in the manufacturer datasheet, especially around the exposed-pad thermal and electrical requirements.
Typical applications include professional audio decoding, bidirectional communications, industrial vibration analysis, and embedded control systems. In an audio system, the processor can perform sample-rate conversion, filtering, mixing, and dynamic-range processing. In communications equipment, its parallel architecture supports modulation, demodulation, and spectral analysis. In instrumentation, it can accelerate FFT-based measurement and real-time filtering.
The main design trade-off is package size and pin complexity: a 24 x 24 mm LQFP requires careful escape routing, and the exposed pad must be connected to the appropriate power and thermal planes. This page combines the manufacturer product information with distributor packaging records, drop-in family alternatives, parameter comparisons, and practical PCB guidance to support component selection and board planning.
Drop-in alternatives for ADSP-21571BSWZ-4 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with ADSP-21571BSWZ-4 (same form factor and footprint) — differing in Package, RoHS Status, Architecture, Core Architecture, Product Type.
ADSP-21571KSWZ-4
✅ Drop-InContact for price
View Datasheet →ADSP-21571CSWZ-5
✅ Drop-InContact for price
View Datasheet →ADSP-SC571BSWZ-4
✅ Drop-InContact for price
View Datasheet →ADSP-SC571KSWZ-4
✅ Drop-InContact for price
View Datasheet →ADSP-21571BSWZ-2
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
ADSP-21571BSWZ-4 Specifications
| Processor Type | Fixed/Floating Point Digital Signal Processor (DSP) |
| Clock Speed | 450 MHz |
| Core Configuration | 2 x SHARC+ cores |
| Architecture | SIMD SHARC+ |
| Package | 176-LQFP-EP (24 x 24 mm) |
| Pin Count | 176 pins |
| Operating Voltage | 1.1 V |
| Ambient Operating Temperature | -40°C to 85°C |
| Mounting Type | Surface Mount |
| Exposed Pad | Yes |
| RoHS Status | RoHS |
| Product Family | ADSP-21571 |
| Core Type | Super Harvard Architecture (SHARC) family |
| Data Format Support | Fixed-point and floating-point |
| Supplier Temperature Classification | -40°C to 85°C TA |
ADSP-21571BSWZ-4 176-lqfp-ep (24 x 24 mm) Pin Configuration Guide
Pin configuration for ADSP-21571BSWZ-4 (176-lqfp-ep (24 x 24 mm) package). Pin numbering, functions, and connection diagrams are defined in the manufacturer datasheet. Refer to it for the exact footprint and soldering guidelines.
No detailed pinout data available for ADSP-21571BSWZ-4.
Refer to the datasheet for full pin configuration.
Typical Applications
ADSP-21571BSWZ-4 is suitable for 6 applications: Professional Audio Signal Processing, Communications Modulation and Demodulation, Industrial Vibration and Condition Monitoring, Test and Measurement Instrumentation, Medical and Biosignal Processing, Machine Vision and Image Preprocessing.
Professional Audio Signal Processing
The ADSP-21571BSWZ-4 fits professional audio processing because two 450 MHz SHARC+ cores provide parallel arithmetic for filtering, mixing, sample-rate conversion, and dynamic-range processing. Its SIMD architecture can execute multiple fixed- or floating-point lanes in parallel, reducing the instruction burden of sample-by-sample audio algorithms. A typical implementation uses the processor for decoding or channel processing while DMA transfers blocks between external memory and the DSP core. The 450 MHz clock provides more throughput than the 200 MHz family option, although the designer must still validate latency, memory bandwidth, and thermal performance for the selected audio sample rate.
Recommended
Communications Modulation and Demodulation
The ADSP-21571BSWZ-4 supports real-time communications functions such as filtering, modulation, demodulation, and spectral analysis. Its two SHARC+ cores at 450 MHz provide parallel SIMD throughput for complex-valued baseband operations, while fixed- and floating-point support lets firmware balance integer efficiency with numeric precision. A practical receiver can use DMA-controlled buffers to move samples between an external interface and DSP memory without involving the CPU for every transfer. System timing must satisfy the external memory and interface requirements in the manufacturer documentation, particularly because sustained sample rates can make memory bandwidth the limiting factor.
Recommended
Industrial Vibration and Condition Monitoring
The ADSP-21571BSWZ-4 is suitable for industrial vibration monitoring because parallel SHARC+ execution accelerates digital filters, FFT-related workloads, and feature extraction on continuous sensor streams. Two 450 MHz cores can divide work between time-domain filtering and frequency-domain analysis, allowing deterministic processing without relying on a general-purpose CPU. A typical installation connects sensors through external analog interfaces, acquires blocks with DMA, and computes spectral features for fault detection. Because the ambient rating extends to 85°C, the design still needs careful thermal management around the exposed pad and a mechanical enclosure that limits temperature rise.
Recommended
Test and Measurement Instrumentation
The ADSP-21571BSWZ-4 can serve as the real-time processing engine in oscilloscope, spectrum-analysis, and precision signal-measurement equipment. The dual-core SHARC+ architecture supports parallel filtering and transform-related computation at a 450 MHz clock, reducing the processing interval between acquisition and result display. External memory should be organized to sustain the selected sample rate and transfer width, while DMA scheduling keeps sample movement predictable. The exposed-pad LQFP package requires a low-impedance thermal and power-plane connection, making board layout and copper area integral to sustained measurement throughput.
Recommended
Medical and Biosignal Processing
The ADSP-21571BSWZ-4 can process biosignals when a medical device requires deterministic filtering, feature extraction, and real-time analysis. Its two 450 MHz SHARC+ cores execute fixed- and floating-point algorithms in parallel, which is useful for ECG, EMG, and physiological monitoring pipelines that continuously ingest samples. A typical design isolates acquisition in an external interface, transfers buffered samples with DMA, and applies digital filtering before transmitting results to a control processor. The device's -40°C to 85°C ambient range covers many enclosed instruments, but medical-system qualification, isolation design, and safety requirements remain outside the component specification.
Recommended
Machine Vision and Image Preprocessing
The ADSP-21571BSWZ-4 is appropriate for image-preprocessing stages that perform filtering, noise reduction, feature extraction, or sensor-data conditioning before a higher-level processor handles recognition. Its parallel SIMD architecture is well suited to repetitive pixel and block operations, while the dual-core configuration can separate acquisition handling from algorithm execution. In a camera pipeline, DMA can move image regions into external memory and the SHARC+ cores can execute parallel kernels with predictable latency. The design must match frame bandwidth to memory performance and include sufficient PCB copper for heat removal from the exposed pad.
Recommended
Recommended Products Summary
Engineering reference data for ADSP-21571BSWZ-4 — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | ADSP-21571KSWZ-4 | ADSP-21571CSWZ-5 | ADSP-SC571BSWZ-4 | ADSP-SC571KSWZ-4 | ADSP-21571BSWZ-2 |
|---|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 176-LQFP-EP (24 x 24 mm) | 176-LQFP-EP (24 x 24 mm) | 176-LQFP-EP (24 x 24 mm) | 176-LQFP-EP (24 x 24 mm) | 176-LQFP-EP (24 x 24 mm) | 176-LQFP-EP (24 x 24 mm) |
| Processor Family | ADSP-21571 | ADSP-21571 | ADSP-21571 | ADSP-SC571 | ADSP-SC571 | ADSP-21571 |
| Pin Count | 176 pins | 176 pins | 176 pins | 176 pins | 176 pins | 176 pins |
Key Differentiators
- Higher same-family clock option for throughput-sensitive designs (vs ADSP-21571BSWZ-2)
- Current ADSP-21571 family positioning over the older SC571 naming (vs ADSP-SC571BSWZ-4)
- Defined B-grade temperature and -4 speed ordering option (vs ADSP-21571KSWZ-4)
Design Notes
Treat the exposed pad as both an electrical and thermal feature. Connect it to the required power and ground structure using the manufacturer datasheet, and provide as much uninterrupted PCB copper as the layout permits beneath and around the package. Estimate junction temperature from processor power, package thermal resistance, and copper area rather than relying on ambient temperature alone. The -40°C to 85°C rating describes allowable operating conditions, not the amount of heat the board can absorb.
Route clock, reset, high-speed memory, and communications signals according to the Analog Devices reference layouts and pin-description table. Keep the 450 MHz clock distribution short and symmetric, avoid stubs on high-speed nets, and provide the specified local decoupling at each supply pin. The 176-pin LQFP footprint leaves narrow escape-routing channels, so complete pin assignment before releasing the PCB artwork.
Do not substitute the K, C, SC571, or -2 order codes solely because the package drawing looks identical. Verify clock speed, temperature grade, exposed-pad connectivity, memory configuration, peripheral assignment, and software support in the manufacturer documentation. A footprint match preserves mechanical assembly, but it does not by itself establish pin-to-pin functional compatibility.
Plan external-memory routing and DMA bandwidth around the sustained sample rate. High-volume streaming between memory and the SHARC+ cores can saturate interfaces even when the arithmetic kernel itself is fast. Use the manufacturer memory timing and termination guidance, keep return paths continuous, and verify signal integrity with simulation or measurements at the operating clock.
Compliance Information
A distributor component record identifies the part as RoHS. No separate REACH, AEC-Q100, halogen-free, or conflict-minerals declaration was identified.