ADSP-21571CSWZ-5 - 500MHz Dual SHARC+ DSP | ADI
MPN: ADSP-21571CSWZ-5 ✓ ActiveADSP-21571CSWZ-5 Overview
A digital signal processor is a semiconductor optimized for arithmetic-intensive operations on continuously sampled or streamed data. In the product hierarchy, a DSP belongs to the processor family alongside microcontrollers and FPGAs, but its architecture emphasizes deterministic real-time arithmetic, parallel data paths, and dedicated memory organization. The SHARC+ architecture used by the ADSP-21571 family supports fixed-point and floating-point processing, making it suitable for communications, audio, industrial-control, and embedded signal-processing systems.
Three headline characteristics define this device: a 500 MHz clock rating, two SHARC+ DSP cores, and a 176-LQFP exposed-pad package. The processor's fixed/floating-point arithmetic supports both integer and floating-point algorithms. Its dual-core organization can distribute independent processing tasks or support coordinated workloads when the firmware, memory system, and interrupt architecture are configured appropriately.
Analog Devices positions the ADSP-21571 within its SHARC+ processor portfolio and relates the device to the ADSP-SC573 architecture, which combines dual-core SHARC+ processing with an Arm Cortex-A5 control processor. This heterogeneous processing approach can separate real-time DSP workloads from higher-level control functions, reducing the need for an additional controller in connected embedded systems. Exact peripheral availability, memory organization, clocking, and thermal limits must be confirmed against the manufacturer datasheet for the selected orderable variant.
Typical engineering uses include real-time audio processing, communications signal chains, industrial motor and vibration analysis, test-and-measurement front ends, and embedded control with dedicated DSP acceleration. The 500 MHz SHARC+ cores are particularly relevant when an algorithm requires sustained SIMD arithmetic, predictable interrupt response, or deterministic execution under a controlled firmware environment.
PCB implementation should preserve the exposed-pad thermal and electrical requirements of the 176-LQFP package. Place the decoupling network close to the supply pins, route high-speed interfaces according to the manufacturer's reference layout, and provide a continuous ground reference beneath the exposed pad. Thermal design and power-rail sequencing should be validated at the highest expected operating temperature rather than inferred from nominal clock frequency alone.
This page organizes the confirmed processor, package, power, and application information into a design-oriented resource. It also distinguishes direct family alternatives from processors that require a new board design, helping engineers compare clock rate, package compatibility, processor architecture, and procurement constraints before committing to a hardware platform.
Drop-in alternatives for ADSP-21571CSWZ-5 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with ADSP-21571CSWZ-5 (same form factor and footprint) — differing in Architecture, RoHS Status, Package, DSP Core Count, Product Type.
ADSP-21571KSWZ-5
✅ Drop-InContact for price
View Datasheet →ADSP-21571BSWZ-5
✅ Drop-InContact for price
View Datasheet →ADSP-21571CSWZ-5 Specifications
| Product Type | Fixed/Floating-Point Digital Signal Processor |
| Processor Family | SHARC+ |
| DSP Core Count | 2 cores |
| Maximum Stated Clock Frequency | 500 MHz |
| Core Supply Voltage | 1.15 V |
| I/O Supply Voltage | 3.30 V |
| Arithmetic Support | Fixed-point and floating-point |
| Package | 176-LQFP exposed pad |
| Package Body Size | 24 mm x 24 mm |
| Mounting Type | Surface mount |
| Exposed Pad | Present |
| Control Processor Reference | Arm Cortex-A5 in the related ADSP-SC573 architecture |
| Instruction Architecture | SIMD SHARC family |
| RoHS Status | Unknown |
| REACH Status | Unknown |
ADSP-21571CSWZ-5 24 mm x 24 mm Pin Configuration Guide
Pin configuration for ADSP-21571CSWZ-5 (24 mm x 24 mm package). Pin numbering, functions, and connection diagrams are defined in the manufacturer datasheet. Refer to it for the exact footprint and soldering guidelines.
No detailed pinout data available for ADSP-21571CSWZ-5.
Refer to the datasheet for full pin configuration.
Typical Applications
ADSP-21571CSWZ-5 is suitable for 6 applications: Industrial Vibration Analysis, Audio Signal Processing, Communications Signal Chain, Motor and Power Control, Test and Measurement Front End, Embedded Control and Sensor Fusion.
Industrial Vibration Analysis
The ADSP-21571CSWZ-5 fits industrial vibration-monitoring systems that require real-time filtering, spectral analysis, and feature extraction close to the sensor interface. Two 500 MHz SHARC+ cores can support parallelized DSP workloads, while fixed- and floating-point execution allows algorithms to retain precision where required. Place the processor on a high-speed control board with local sensor ADC connectivity and use its 1.15 V core and 3.30 V I/O rails in the system power architecture. The principal design consideration is maintaining deterministic data flow from acquisition through decision logic without introducing excessive board delay or EMI coupling.
Audio Signal Processing
The ADSP-21571CSWZ-5 is suitable for digital audio products requiring deterministic filtering, mixing, equalization, or format conversion at a 500 MHz-class processing rate. The dual SHARC+ organization can support parallel audio-channel work, while the fixed/floating-point capability accommodates sample-accurate signal paths and higher-level numerical algorithms. A practical implementation places the DSP between high-performance audio converters and a network or control processor, with short and impedance-controlled digital interconnects. Validate converter interface timing, clock ratios, and supported data formats against the exact manufacturer datasheet before final signal-path allocation.
Communications Signal Chain
The ADSP-21571CSWZ-5 can serve as the dedicated real-time processor in communications equipment where modulation, filtering, channelization, or packet preprocessing must execute predictably. Its two 500 MHz SHARC+ cores provide SIMD-oriented arithmetic capacity, and fixed/floating-point support is useful for algorithms spanning efficient integer paths and precision-sensitive stages. The processor should sit close to the radio or transceiver data interface to reduce bus latency and preserve timing margin. Designers must confirm available serial interfaces, DMA behavior, memory topology, and supported clocking in the manufacturer datasheet for the exact grade.
Motor and Power Control
The ADSP-21571CSWZ-5 is appropriate for sophisticated motor-control platforms that combine deterministic sampling, digital filtering, and supervisory control. The two 500 MHz SHARC+ cores allow control-loop computation and supervisory processing to be organized efficiently, subject to firmware partitioning and the processor's memory and interrupt resources. Its 1.15 V core and 3.30 V I/O rails support a split power tree, while the exposed-pad LQFP requires careful copper and thermal implementation. Confirm the grade-specific temperature range, analog-interface ecosystem, and safety requirements before using the processor in safety-critical machinery.
Test and Measurement Front End
The ADSP-21571CSWZ-5 fits high-performance measurement instruments that need real-time acquisition processing, calibration, filtering, or transform analysis. Its 500 MHz rating and dual SHARC+ cores support throughput-intensive numerical tasks, while floating-point execution is useful for algorithms requiring dynamic range beyond basic fixed-point stages. The processor can perform preprocessing close to the converter before results are transferred to a host controller. For accurate results, synchronize sampling and processor clocks, use controlled impedance routing for high-rate interfaces, and separate sensitive analog sections from the digital switching activity associated with the exposed pad and I/O rails.
Embedded Control and Sensor Fusion
The ADSP-21571CSWZ-5 is suitable for embedded systems that must combine sensor acquisition with real-time processing in a single processor package. Two 500 MHz SHARC+ cores support parallel signal workloads, and the processor's fixed/floating-point arithmetic is useful for filtering, estimation, and control functions. In a connected product, the device can preprocess sensor data before forwarding results to a communications processor or system controller, reducing avoidable host workload. The board design should provide local decoupling, a stable clock reference, careful exposed-pad thermal relief, and verified pin multiplexing for each peripheral interface selected by the firmware design.
Engineering reference data for ADSP-21571CSWZ-5 — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | ADSP-21571KSWZ-5 | ADSP-21571BSWZ-5 |
|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices |
| Package | 176-LQFP exposed pad (24x24 mm) | 176-LQFP exposed pad - same package family | 176-LQFP exposed pad - same package family |
| Processor Family | ADSP-21571 SHARC+ | ADSP-21571 SHARC+ | ADSP-21571 SHARC+ |
| Ordering Grade | C suffix | K suffix | B suffix |
Key Differentiators
- Dual-SHARC processing at a 500 MHz stated clock (vs ADSP-21571KSWZ-5)
- Confirmed fixed/floating-point DSP classification (vs ADSP-21571BSWZ-5)
- 176-LQFP exposed-pad package supports PCB reuse within the family (vs ADSP-21571KSWZ-5)
Design Notes
Treat the exposed pad as both a thermal path and a package-level electrical connection. Follow the Analog Devices manufacturer datasheet for exposed-pad connection, via arrangement, and copper recommendations. Estimated: the allowable dissipation must be calculated from the worst-case core and I/O power, ambient temperature, and the package-specific junction-to-ambient thermal resistance; those numerical inputs were not established, so no thermal-rise estimate is asserted.
Separate the 1.15 V core and 3.30 V I/O rails and verify their permitted sequencing and ramp limits in the manufacturer datasheet. Place local high-frequency and bulk decoupling at the associated supply pins, with the return path referenced to the ground plane beneath the processor. Avoid combining the rails through a single unfiltered route, because switching current shared between core and I/O loads can increase supply disturbance and complicate fault analysis.
Use the manufacturer's reference layout as the basis for a 176-LQFP exposed-pad design. Preserve pin-1 orientation, provide adequate escape routing for memory and serial interfaces, and connect the thermal pad according to the exact package drawing. Validate signal integrity at the highest operating clock with the intended peripherals enabled, and keep analog inputs, references, and clocks away from high-current switching paths where the board design allows it.
Do not substitute an ADSP-21571 suffix solely because the package matches. Verify the ordering-code table, temperature grade, qualification status, exposed-pad connection, and lifecycle status for the exact replacement. Also confirm that the replacement has the same clock, memory, serial-interface, and peripheral requirements. A package-compatible processor can still create software or hardware changes when its grade, mask, or qualification status differs.
Compliance Information
The exact grade-specific compliance and qualification status was not stated. Confirm RoHS, REACH, automotive qualification, lead-free, halogen-free, and conflict-minerals declarations in the Analog Devices manufacturer product documentation.