AKM Semiconductor

AK4363VF - 24-Bit Stereo Audio DAC with PLL | AKM

MPN: AK4363VF ✗ End of Life
2.7 V to 5.5 V Vdss 24-VSOP, 0.220 mm pitch, 5.60 mm width Package 27 MHz recovered MPEG clock Speed
MOQ: 1 |

AK4363VF Overview

AKM Semiconductor Inc. AK4363VF is a 24-bit stereo CMOS digital-to-analog converter with an integrated phase-locked loop, designed for digital video broadcast set-top boxes and DVD equipment. The device operates from a 2.7 V to 5.5 V supply, supports sampling rates from 16 kHz to 96 kHz, and is packaged in a surface-mount 24-VSOP.

A digital-to-analog converter is an interface IC that converts digital audio samples into analog voltage signals suitable for downstream amplifiers, speakers, headphones, or audio-processing stages. The AK4363VF belongs to the broader DAC and mixed-signal IC hierarchy, combining a stereo DAC, clock-recovery circuitry, and analog output filtering in one component.

The AK4363VF produces single-ended analog outputs that are internally analog-filtered to suppress out-of-band noise. This filtering approach can eliminate the need for external reconstruction filters in suitable signal chains. Its integrated phase-locked loop can lock to a recovered 27 MHz MPEG clock, with selectable sampling-clock frequencies supporting the converter's 16 kHz to 96 kHz operating range.

The serial digital interface, 24-bit conversion resolution, stereo output architecture, and integrated PLL reduce the number of separate components required in a digital-audio reproduction path. Single-ended outputs simplify analog connection compared with a differential-output design, although board-level grounding becomes more important because output-reference noise can couple directly into the reproduced signal.

Typical uses include digital broadcast set-top boxes, DVD players, digital video equipment, and other consumer systems that recover a clock from a serial audio stream. The 24-VSOP surface-mount package is suitable for automated production, while its 2.7 V to 5.5 V analog-and-digital supply range permits integration with common embedded multimedia platforms.

Designers should route analog and digital return currents carefully, place bypass components near the supply pins, and follow the manufacturer pin-description table when assigning PCB nets. Verify the required master and slave clock arrangement, audio data format, mute behavior, and output load before releasing a PCB because these details determine whether the integrated PLL can operate as intended.

This product record combines the converter's defining electrical and packaging characteristics with practical application guidance, sourcing answers, and a compatibility-focused replacement assessment. It is intended to help engineers determine whether the AK4363VF fits an existing 24-VSOP audio design and whether redesign is necessary when the original device is unavailable.

Drop-in alternatives for AK4363VF — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

AK4363VN

✅ Drop-In ⚠️ Specs Unverified
📦 24-VSOP
Same AK4363 family conversion resolution and 24-VSOP package class; exact supply limits, clock configuration, and lifecycle differences require confirmation from the applicable manufacturer datasheet.

📋 Reference alternative (not in catalog)

AK4363VF Maximum Ratings & Electrical Characteristics

Device Type Stereo audio digital-to-analog converter with phase-locked loop
Conversion Resolution 24 bit
Number of Channels 2 channels
Sampling Rate 16 kHz to 96 kHz
Supply Voltage 2.7 V to 5.5 V
Supply Type Analog and digital dual supply
Process Technology CMOS
Digital Interface Serial
PLL Reference Clock 27 MHz recovered MPEG clock
Analog Output Configuration Single-ended
Output Filtering On-chip analog filtering for out-of-band noise removal
External Output Filter Requirement Not required for out-of-band noise removal under the manufacturer's stated operating conditions
Package 24-VSOP, 0.220 mm pitch, 5.60 mm width
Mounting Type Surface mount
Packaging Tape and reel

AK4363VF 24-vsop, 0.220 mm pitch, 5.60 mm width Pin Configuration Guide

Pin configuration for AK4363VF (24-vsop, 0.220 mm pitch, 5.60 mm width package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.

24-vsop, 0.220 mm pitch, 5.60 mm width package pinout diagram for AK4363VF

No detailed pinout data available for AK4363VF.

Refer to the datasheet for full pin configuration.

Typical Applications

AK4363VF is suitable for 6 applications: Digital Broadcast Set-Top Box, DVD Player Audio Output, Digital Video Multimedia System, Recovered-Audio Clocking, Stereo Analog-Audio Endpoint, Legacy Consumer Audio Board.

📺

Digital Broadcast Set-Top Box

The AK4363VF fits the final digital-audio reproduction stage of a broadcast set-top box because it combines a 24-bit stereo DAC, an integrated PLL, and filtered single-ended outputs in one 24-VSOP device. Its serial interface supports digital audio streams at 16 kHz to 96 kHz, while the PLL can lock to a recovered 27 MHz MPEG clock. The system can therefore pass recovered audio data directly to the converter without adding a separate stereo DAC or basic output reconstruction stage. The designer must still verify clock mode, divider selection, mute behavior, and analog routing, because these functions determine how cleanly the recovered stream becomes a usable stereo output.

🖥️

DVD Player Audio Output

The AK4363VF was explicitly identified for DVD equipment, where a compact, low-component-count analog-audio path is valuable. It converts two serial digital-audio channels into filtered single-ended analog outputs at 24-bit resolution and sampling rates from 16 kHz to 96 kHz. Because out-of-band noise filtering is integrated into the converter, the receiver can avoid adding a basic external reconstruction-filter stage when the recommended loading and layout conditions are satisfied. Integration is strongest in legacy or service-oriented designs whose host processor already provides compatible I2S-style serial data and a recoverable clock.

🎥

Digital Video Multimedia System

The AK4363VF can provide the stereo analog-audio endpoint for digital-video equipment that receives compressed audio and needs a conventional line-level output. Its 2.7 V to 5.5 V supply range aligns with common 3.3 V and 5 V embedded system rails, while the surface-mount 24-VSOP supports automated assembly. The integrated PLL is valuable when the platform recovers a 27 MHz MPEG-related reference and can select a suitable sampling-clock output. Board planning should preserve a quiet analog return path and place bypass capacitors close to the relevant supply pins to prevent digital switching activity from modulating the reproduced output.

🌐

Recovered-Audio Clocking

The AK4363VF is suitable for systems where the audio source does not provide a directly usable master clock and must reconstruct its timing through a PLL. According to the manufacturer datasheet, the phase-locked loop locks to a recovered 27 MHz MPEG clock and offers selectable sampling-clock frequencies for 16 kHz to 96 kHz operation. Integrating that clock function with the stereo DAC reduces the number of separate clock-generation and conversion components in legacy broadcast designs. The implementation must be checked against the source's expected cycle timing, reset requirements, and supported operating modes before the circuit is finalized.

🎧

Stereo Analog-Audio Endpoint

The AK4363VF can serve as a compact stereo analog-audio endpoint in older consumer electronics, broadcast peripherals, and service platforms that still use single-ended DAC outputs. It supports 24-bit conversion across a 16 kHz to 96 kHz sampling range and integrates analog filtering intended to suppress out-of-band noise without a basic external filter. That integration is especially helpful where board area and assembly cost matter more than the flexibility of a newer high-resolution codec. The receiving amplifier should be checked for compatible input impedance and amplitude, and the PCB should maintain a controlled analog ground and output reference.

🔧

Legacy Consumer Audio Board

The AK4363VF is useful in repair and continuation designs for legacy set-top boxes, DVD players, and related multimedia products because it combines the stereo DAC and phase-locked loop in a 24-VSOP package. The exact AK4363VF is listed as obsolete, so lifecycle planning remains essential even when its original footprint is convenient. For new production, an engineer should compare the exact order code with a supported same-family option and confirm that the replacement preserves digital timing, mute and reset behavior, supply sequencing, and analog output expectations. If the original board also relies on obsolete peripherals, a broader platform refresh may offer better long-term support.

What is the AK4363VF?
The AK4363VF is a 24-bit stereo CMOS digital-to-analog converter with an integrated phase-locked loop. According to the Asahi Kasei Microsystems datasheet, it accepts serial digital audio data, supports sampling rates from 16 kHz to 96 kHz, and generates single-ended analog outputs for digital video broadcast set-top boxes and DVD equipment.
What is the supply voltage range of the AK4363VF?
The AK4363VF operates from 2.7 V to 5.5 V using analog and digital supplies. This range makes the converter suitable for embedded consumer and multimedia equipment that uses 3.3 V or 5 V power rails. Decoupling and return-current routing should still follow the manufacturer layout guidance for the specific 24-VSOP implementation.
Does the AK4363VF require an external reconstruction filter?
No external filter is required merely to remove the DAC's out-of-band noise because the AK4363VF includes analog filtering on its single-ended outputs. According to the Asahi Kasei Microsystems datasheet, this integrated filtering simplifies the analog output path. Additional filtering may still be useful for channel-specific attenuation, board-layout mitigation, or system-level EMC requirements.
What are the key specifications of AK4363VF that engineers should know?
The AK4363VF combines 24-bit resolution, two audio channels, 16 kHz to 96 kHz sampling, a serial interface, and an integrated PLL in a 24-VSOP package. It operates from 2.7 V to 5.5 V and provides filtered single-ended outputs. The integrated PLL can operate from a recovered 27 MHz MPEG clock with selectable sampling-clock frequencies.
Where can I download the AK4363VF datasheet PDF?
The AK4363VF manufacturer datasheet is available as a PDF through the Asahi Kasei Microsystems document link listed on this page. It describes the stereo DAC, integrated PLL, 24-VSOP pin assignments, electrical characteristics, clocking, digital audio interface, and typical application circuits. Review the pin-description table before assigning PCB signals.
Where can I find the AK4363VF pinout?
The AK4363VF pin assignment is defined in the pin-description table and package drawing in the Asahi Kasei Microsystems AK4363 datasheet. The component uses a 24-VSOP package with 0.220 mm pitch and a 5.60 mm width. Use that table for exact pin numbers because functions such as supplies, clocks, serial data, resets, mutes, and analog outputs must be mapped precisely.
What clock does the AK4363VF PLL use?
The integrated AK4363VF PLL can lock to a recovered 27 MHz MPEG clock and select the required sampling-clock frequency. The manufacturer describes the converter as supporting 16 kHz to 96 kHz sampling. Clock source, master-versus-slave operation, and supported divider settings should be confirmed in the datasheet before PCB release.
Can the AK4363VF be used in a DVD player?
Yes. The Asahi Kasei Microsystems datasheet identifies digital video broadcast set-top boxes and DVD equipment as primary applications for the AK4363VF. Its 24-bit stereo DAC, filtered single-ended outputs, 16 kHz to 96 kHz sampling range, and integrated PLL support digital-audio reproduction paths commonly found in these systems.
What applications are suitable for the AK4363VF?
The AK4363VF is suitable for digital broadcast receivers, set-top boxes, DVD players, and multimedia equipment that converts serial digital audio into analog stereo signals. Its 24-VSOP package supports surface-mount production, while the 2.7 V to 5.5 V supply range accommodates common 3.3 V and 5 V embedded platforms.
Is AK4363VF suitable for a digital video audio-output design?
Yes, the AK4363VF was designed specifically for digital video broadcast and DVD audio paths. It accepts serial audio data, converts two channels at 24-bit resolution, supports sampling rates from 16 kHz to 96 kHz, and provides filtered single-ended outputs. The recovered-clock requirement makes PLL and system-clock verification especially important.
Where can I buy AK4363VF online?
Use the Request a Quote form on this page to request AK4363VF availability, current lead time, and purchasing terms. Because the device is listed as obsolete, requesters should also state the required package, quantity, and traceability needs. The quote team can confirm whether an approved source or another lifecycle route is appropriate for the production build.
What is the price of AK4363VF?
Current commercial terms for the obsolete AK4363VF should be requested through the Request a Quote form on this page. Include the required quantity, target reel format, shipment location, and expected production schedule. Requesting a complete quote helps account for lifecycle constraints and any special sourcing requirements without relying on a stale market listing.
What is the lead time for AK4363VF?
The current lead time for AK4363VF should be confirmed through the Request a Quote form on this page. As an obsolete 24-VSOP audio DAC, its availability may depend on remaining factory supply, controlled inventory, or an approved sourcing route. Include your required delivery date and annual usage so the quote can reflect the actual procurement need.
Is AK4363VF in stock?
AK4363VF stock status should be confirmed through the Request a Quote form on this page rather than inferred from general catalog listings. The device is identified as obsolete, so availability can change independently of its technical specifications. Provide the required quantity and schedule when requesting a quotation to determine the current sourcing position.
What is the best drop-in replacement for AK4363VF?
The AK4363VN is the closest same-family candidate identified for a drop-in review because it belongs to the AK4363 stereo DAC family and is associated with the same 24-VSOP package class. No fully verified cross-brand pin-compatible replacement was identified. Confirm pin functions, clock requirements, electrical limits, and lifecycle status before treating it as a production replacement.
What can replace the AK4363VF?
The AK4363VN is the leading same-family replacement candidate for the AK4363VF, subject to a final pin and clocking review. The cross-reference search did not establish a manufacturer-qualified, pin-to-pin cross-brand substitute for this obsolete 24-VSOP converter. If digital-interface, PLL, mute, or analog-output requirements differ, the practical choice may require an equivalent converter in a different package and corresponding PCB redesign.
Is the AK4363VN the same as the AK4363VF?
The AK4363VN is a closely related member of the AK4363 family and is the most relevant same-brand replacement candidate for the AK4363VF. The two should not be treated as automatically identical without checking the order codes, pin descriptions, clock configuration, and operating limits in the applicable datasheets. The AK4363VF's 24-VSOP footprint makes a footprint check mandatory.
When should I choose AK4363VF over AK4363VN?
Choose the AK4363VF only when an existing design specifically requires that exact obsolete order code and its documented behavior. For new or replacement production, AK4363VN is the more practical candidate because it belongs to the same converter family, subject to confirming package, pin, clock, and lifecycle requirements. If either candidate is unavailable, evaluate the system-level redesign before committing.

Engineering reference data for AK4363VF — comparison, design guidance, and compliance information.

Selection Guide

Choose the exact AK4363VF when maintaining an existing 24-VSOP design whose schematic, layout, and bill of materials explicitly call out that order code, particularly when the system uses its recovered 27 MHz MPEG-clock PLL. Consider AK4363VN when an AK4363-family replacement is needed and its manufacturer documentation confirms identical pin, clock, electrical, and lifecycle requirements. Do not choose it solely because the package name matches. If no verified same-package production option remains, assess whether the host can support a modern audio codec; such a migration may use a different package, interface, voltage, or clock architecture and therefore require PCB changes. The AK4363VF remains attractive for repair and continuation use because it combines 24-bit stereo conversion, filtering, and PLL functionality, but its obsolete lifecycle status makes long-term procurement planning essential.

Comparison with Alternatives

Parameter This Product AK4363VN
Package 24-VSOP, 0.220 mm pitch, 5.60 mm width 24-VSOP package class
Brand AKM Semiconductor Inc. AKM Semiconductor Inc.
Device Type Stereo audio DAC with integrated PLL Stereo audio DAC with integrated PLL
Conversion Resolution 24 bit 24 bit
Number of Channels 2 channels 2 channels
Sampling Rate 16 kHz to 96 kHz 16 kHz to 96 kHz
Supply Voltage 2.7 V to 5.5 V 2.7 V to 5.5 V
Analog Output Single-ended Single-ended
PLL Reference Selectable frequencies locked to a recovered 27 MHz MPEG clock Selectable frequencies locked to a recovered 27 MHz MPEG clock

Key Differentiators

  • Combines a stereo DAC and phase-locked loop in one converter (vs AK4363VN)
  • Designed for recovered MPEG-related audio clocking (vs AK4363VN)
  • Integrated analog output filtering (vs AK4363VN)

Design Notes

Separate the digital audio and clock-return currents from the analog output reference where the board stackup permits. Place the required bypass capacitors close to the supply and ground pins, and keep the converter's analog outputs away from high-speed switching nodes. The single-ended architecture makes reference stability important because output-level and noise performance depend directly on the quality of the analog return path.

Follow the manufacturer's recommended analog and digital supply connections rather than assuming the 2.7 V to 5.5 V range permits every power configuration. Verify the permitted relationship between supply rails, startup order, and operating mode. Add local high-frequency bypass capacitance and a suitable bulk reservoir near the converter if the source rail has long PCB traces or transient loading.

Do not treat an obsolete status as proof that the exact device is immediately procurable, and do not assume a family member is interchangeable without reviewing its pin table. Before substituting, compare clock-source requirements, serial-data timing, reset and mute polarity, analog output loading, supply limits, and exposed thermal or package details. A footprint match alone does not guarantee functional equivalence.

Route serial data, bit clock, and master-clock traces as controlled impedance paths when the source device and board environment require it. Keep clock traces short, avoid stubs, and maintain continuous reference planes beneath high-speed nets. The AK4363VF relies on clean timing for serial data capture and PLL lock, so an apparently correct schematic can still fail if clock jitter or edge quality is excessive.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

No compliance declarations or automotive qualification statement were identified for the AK4363VF. Confirm environmental and material compliance directly with AKM Semiconductor Inc. before production release.

Data verified on: 2026-11-10 — data verified and curated by XAIPART's component engineering team

Related Searches

AK4363VF datasheet AK4363VF pinout AK4363VF datasheet pdf AK4363VF specifications AK4363VF 24-VSOP AK4363VF 24 bit DAC AK4363VF 96 kHz AK4363VF equivalent AK4363VF replacement AK4363VF vs AK4363VN AK4363VF footprint AK4363VF application circuit AKM AK4363VF price AKM AK4363VF stock where to buy AK4363VF

Related Components & Terms

AKM Semiconductor Inc. AK4363VF AK4363VN digital-to-analog converter DAC audio DAC stereo DAC CMOS phase-locked loop PLL 24-bit resolution 16 kHz to 96 kHz sampling single-ended output MPEG clock 27 MHz clock 2.7 V to 5.5 V supply 24-VSOP VSOP package family surface mount SMD digital broadcast set-top box DVD player out-of-band noise filtering serial digital audio interface
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details