Microchip Technology

ATTINY861A-XU - 20MHz 8KB AVR MCU | Microchip

MPN: ATTINY861A-XU ✓ Active
1.8 V to 5.5 V Vdss 20-pin TSSOP Package 20 MHz Speed 8 KB in-system programmable Memory
MOQ: 1 |

ATTINY861A-XU Overview

The Microchip Technology ATTINY861A-XU is a picoPower 8-bit AVR RISC microcontroller with an operating frequency of 20 MHz, 8 KB of in-system programmable Flash memory, 512 bytes of EEPROM, 512 bytes of SRAM, and 16 general-purpose I/O lines, housed in a 20-pin TSSOP package. It combines compact embedded control with 32 general-purpose working registers and integrated timing peripherals.

A microcontroller is a programmable semiconductor that integrates a CPU core, memory, I/O ports, and peripherals on one chip. The ATTINY861A belongs to the AVR and tinyAVR families within the broader embedded-controller hierarchy. Its RISC-based architecture executes compact control software, while the 8 KB Flash program memory allows boot code, application logic, and configuration data to be stored directly on the device.

Three features define the device's practical capability. Its 20 MHz maximum clock supports faster control-loop and peripheral timing than lower-frequency 8-bit AVR implementations. Its 16 general-purpose I/O lines provide interfaces for sensors, actuators, indicators, and communications. The 512-byte EEPROM also supports nonvolatile parameter storage, while the 512-byte SRAM provides working memory for stacks, variables, and intermediate calculations.

The ATTINY861A device family includes an 8-bit timer/counter with compare modes, along with 16 I/O lines and 32 working registers. These resources support compact control tasks such as timing pulse generation, sensor sampling, motor or LED control, and sequential logic. The picoPower architecture is intended to balance processing capability with low-power operation, although an exact active-current figure is not stated on the manufacturer product page.

Typical uses include compact industrial controllers, battery-powered sensing modules, LED lighting controllers, small motor-control boards, and Arduino-compatible hobby projects. The 20-pin TSSOP package supports dense PCB layouts, while the relatively small memory capacity favors embedded applications whose firmware can be kept compact.

For PCB implementation, use the pin-description table and connection diagrams in the Microchip ATtiny861A documentation when assigning tracks. The TSSOP lead pitch requires careful footprint verification, and programming, clock, reset, and decoupling connections should follow the device's established reference patterns rather than relying solely on generic MCU layouts.

This page combines the manufacturer's device description with pin-compatible family alternatives, a parameter comparison, application guidance, and practical design notes. It is intended to accelerate component selection while preserving the distinction between a true PCB-compatible choice and a merely similar microcontroller.

Drop-in alternatives for ATTINY861A-XU — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

ATTINY261A-XU

✅ Drop-In
Microchip Technology
📦 20-pin TSSOP
8-bit AVR RISC microcontroller · 20 MHz · 2 KB (1K x 16) · 128 B · 128 B · 16 · 32 · 8-bit with compare modes

Contact for price

View Datasheet →

ATTINY461A-XU

✅ Drop-In ⚠️ Specs Unverified
Microchip Technology
📦 20-pin TSSOP
8-bit RISC microcontroller · AVR enhanced RISC · 20 MHz · 4 KB · 2K x 16 · 256 bytes · 256 bytes · 16

Contact for price

View Datasheet →

ATTINY861A-XU Maximum Ratings & Electrical Characteristics

Product Type 8-bit AVR RISC microcontroller
Maximum Clock Frequency 20 MHz
Flash Memory 8 KB in-system programmable
Flash Organization 4K x 16
EEPROM 512 bytes
SRAM 512 bytes
General-Purpose I/O Lines 16
General-Purpose Working Registers 32
Timer/Counter 8-bit timer/counter with compare modes
Architecture AVR 8-bit RISC
Low-Power Technology picoPower
Supply Voltage Range 1.8 V to 5.5 V
Nominal Supply Voltages 2.5 V, 3.3 V, and 5 V
Package 20-pin TSSOP
Mounting Type Surface mount
RoHS Status Compliant
Programming Interface In-system programmable Flash

ATTINY861A-XU 20-pin tssop Pin Configuration Guide

Pin configuration for ATTINY861A-XU (20-pin tssop package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.

20-pin tssop package pinout diagram for ATTINY861A-XU

No detailed pinout data available for ATTINY861A-XU.

Refer to the datasheet for full pin configuration.

Typical Applications

ATTINY861A-XU is suitable for 6 applications: Compact Industrial Control Module, Battery-Powered Sensor Interface, LED Lighting and Sequencer, Small Motor and Actuator Controller, Arduino-Compatible Automation Controller, Remote Control and Keypad Interface.

🏭

Compact Industrial Control Module

The ATTINY861A-XU fits compact control modules that supervise sensors, indicators, relays, or small actuators over a 1.8 V to 5.5 V supply. Its 16 general-purpose I/O lines provide practical interface capacity, while the 20 MHz AVR core supports responsive sequencing and timer-based control. The 8 KB Flash accommodates a complete embedded program, and 512 bytes of EEPROM can retain calibration values or operating counters. Designers should partition the 512-byte SRAM carefully for stacks and variables, particularly if interrupt handlers or buffered communication routines are added.

🧩

Battery-Powered Sensor Interface

The ATTINY861A-XU is suitable for a small battery-powered sensor interface that periodically reads an analog or digital sensor and records operating information. Its 16 I/O lines can support sensor inputs, status indicators, and a serial communication interface, while the picoPower 8-bit AVR architecture is designed around efficient embedded control. The 512-byte EEPROM is useful for preserving counters or calibration data across power cycles, although write endurance and retention should be considered for frequently updated values. Average-current calculations must include the selected clock source and active duration.

💡

LED Lighting and Sequencer

The ATTINY861A-XU can implement an LED sequencer, status-light controller, or programmable illumination timer using its 16 general-purpose I/O lines and 8-bit timer/counter with compare modes. At 20 MHz, the device can manage multiple timing events and software-driven sequences while reserving pins for a button, serial configuration interface, and fault indication. Its 8 KB Flash provides room for patterns and control logic, while 512 bytes of SRAM is adequate when animation state is compact. Constant-current LED drivers and high-power strings still require suitable external transistor and thermal designs.

🔧

Small Motor and Actuator Controller

The ATTINY861A-XU is appropriate for low-power motor, valve, or actuator control where a compact 8-bit microcontroller must coordinate input sensing, timing, and output switching. Sixteen I/O lines provide connections for control inputs, status feedback, and external driver interfaces, while the timer/counter compare modes support repeatable pulse and period generation. The 20-pin TSSOP package keeps the controller area small, but the MCU does not directly replace a motor driver, current-sense amplifier, or power-stage MOSFET. Verify stall current, switching frequency, protection behavior, and thermal rise in the complete actuator circuit.

📱

Arduino-Compatible Automation Controller

The ATTINY861A-XU can serve as the controller in an Arduino-compatible automation or educational platform using 3.3 V or 5 V logic. The device supports 16 general-purpose I/O lines, 20 MHz operation, and in-system programmable Flash, enabling straightforward firmware updates and peripheral interfacing. Its 8 KB program-memory limit favors concise sketches or tightly compiled control logic, and a board-specific bootloader or programming connector must be implemented correctly. Verify the exact Arduino pin mapping because physical connector labels do not necessarily correspond to the same numbered MCU pins.

📺

Remote Control and Keypad Interface

The ATTINY861A-XU fits remote-control panels, keypad scanners, and simple human-interface modules where a microcontroller must detect inputs and update LEDs or an attached display. Its 16 I/O lines can be divided among matrix keys, status LEDs, and a communications interface, while the 8-bit timer/counter supports debouncing, periodic scanning, or output timing. The 512-byte EEPROM can store configuration settings, and the 8 KB Flash supports structured keypad and communication routines. For matrix scanning, account for ghost-key states and settle time rather than assuming every key event is a single electrical transition.

What are the key specifications of ATTINY861A-XU that engineers should know?
The ATTINY861A-XU is a 20 MHz, 8-bit AVR microcontroller with 8 KB of Flash memory, 512 bytes of EEPROM, 512 bytes of SRAM, and 16 general-purpose I/O lines. According to the Microchip ATtiny861A product page, it also provides 32 general-purpose working registers and an 8-bit timer/counter with compare modes. The device is packaged in a 20-pin TSSOP and operates from 1.8 V to 5.5 V.
What is the ATTINY861A-XU and what does it do?
The ATTINY861A-XU is a compact picoPower 8-bit AVR RISC microcontroller intended for embedded-control tasks. According to the Microchip ATtiny861A product page, it combines 20 MHz operation, 8 KB of in-system programmable Flash, 512 bytes of EEPROM, 512 bytes of SRAM, and 16 general-purpose I/O lines. It can execute control firmware for sensing, timing, LED sequencing, actuator control, and other low-to-medium-complexity embedded functions.
Where can I download the ATTINY861A datasheet PDF?
The official ATTINY861A documentation is available through the Microchip ATtiny861A product page at https://www.microchip.com/en-us/product/ATtiny861A. Use the manufacturer page for the current datasheet, device revision information, package drawings, electrical characteristics, and programming guidance. The ATTINY861A-XU ordering code identifies the 20-pin TSSOP configuration, while the family document also covers related devices in the tinyAVR family.
Where can I find the ATTINY861A pinout?
The ATTINY861A pinout, signal names, and package dimensions should be taken from the pin-description table in the Microchip ATtiny861A datasheet. The ATTINY861A-XU uses a 20-pin TSSOP package with 16 general-purpose I/O lines, so pin assignments must be checked against the specific package variant rather than copied from an older ATtiny861 drawing. Use the manufacturer pin table when creating the PCB footprint and assigning power, ground, reset, clock, programming, and I/O nets.
Is ATTINY861A-XU suitable for a 3.3 V Arduino-style controller?
The ATTINY861A-XU is suitable for a 3.3 V embedded controller because its documented supply range is 1.8 V to 5.5 V and 3.3 V is one of the listed nominal operating voltages. The 16 I/O lines can support sensors, indicators, and actuators, while the 8 KB Flash capacity limits the size of the application program. Compatibility with a particular Arduino-compatible board still depends on pin mapping, programming connectors, bootloader support, and the board's voltage-level arrangement.
How much memory does the ATTINY861A-XU have?
The ATTINY861A-XU has 8 KB of in-system programmable Flash, 512 bytes of EEPROM, and 512 bytes of SRAM. According to the Microchip ATtiny861A product page, the Flash is organized as 4K x 16 and the device provides 32 general-purpose working registers. EEPROM is intended for values that must survive a power cycle, while SRAM is used for stack and variable storage during program execution.
What is the difference between ATTINY861A-XU and ATTINY261A-XU?
The ATTINY861A-XU provides 8 KB of Flash, 512 bytes of EEPROM, and 512 bytes of SRAM, while the ATTINY261A-XU provides 2 KB of Flash, 128 bytes of EEPROM, and 128 bytes of SRAM. Microchip migration documentation identifies ATtiny261A as a pin- and function-compatible subfamily member, but the reduced memory can prevent an existing 861A firmware image from fitting. The two devices therefore share a footprint while offering materially different memory capacity.
When should I choose ATTINY861A-XU over ATTINY261A-XU?
Choose ATTINY861A-XU when firmware size, EEPROM capacity, or SRAM demand exceeds the ATtiny261A limits. The 861A provides 8 KB of Flash versus 2 KB, 512 bytes of EEPROM versus 128 bytes, and 512 bytes of SRAM versus 128 bytes. For a compact timing or I/O-control design with a very small program, ATTINY261A-XU may be sufficient, but code compiled for the 861A may not fit in the 261A.
What can replace ATTINY861A-XU on the same PCB?
ATTINY261A-XU is a same-package, pin-compatible candidate for an ATTINY861A-XU PCB, but it has only 2 KB of Flash, 128 bytes of EEPROM, and 128 bytes of SRAM compared with 8 KB, 512 bytes, and 512 bytes. Microchip migration documentation supports pin and functional compatibility within the tinyAVR family. Before replacement, confirm that the application program fits, boot-code assumptions remain valid, and every peripheral used by the design is supported.
Is ATTINY861A-XU the same as ATTINY461A-XU?
ATTINY861A-XU and ATTINY461A-XU are related tinyAVR devices with a compatible 20-pin TSSOP footprint, but they are not identical. The 861A has 8 KB of Flash, while the 461A family position provides less program memory, and their peripheral sets are not interchangeable without review. Treat the 461A as a redesign candidate only after checking the instruction footprint, timer functions, boot-loader behavior, memory requirements, and every peripheral used by the application.
What is the best Microchip equivalent for ATTINY861A-XU?
The closest same-package family candidates are ATTINY261A-XU and ATTINY461A-XU, but neither is a functionally exact substitute for every ATTINY861A-XU application. The principal differences are Flash, EEPROM, SRAM, and peripheral capability. For the lowest-risk replacement, retain an ATTINY861A device where its larger memory and timer resources are required; otherwise, validate the selected family member against the complete application and peripheral list.
ATTINY861A-XU vs ATTINY261A-XU: which is better for an embedded controller?
The ATTINY861A-XU is better when an embedded controller needs more firmware and data memory, while ATTINY261A-XU is adequate for a simpler design with a compact program. Both use a 20-pin TSSOP and support the same 20 MHz device speed and 1.8 V to 5.5 V supply range. According to Microchip migration documentation, ATtiny261A belongs to a pin- and function-compatible subfamily, but its smaller memory can constrain software migration.
Where can I buy ATTINY861A-XU online?
Use the Request a Quote form on this page to request ATTINY861A-XU availability, current unit pricing, and order lead time. Quote requests are the appropriate route when production quantities, date codes, or shipment timing must be confirmed against the current supplier position. The exact 20-pin TSSOP ordering code should remain unchanged, and any authorized shipment should be checked against the target assembly's moisture, packing, and traceability requirements.
What is the lead time for ATTINY861A-XU?
The current lead time for ATTINY861A-XU should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, inventory position, date-code requirement, and shipping destination, so a historical listing does not establish a guaranteed production schedule. Include your requested quantity, target date, acceptable packing format, and shipment location in the request to obtain a useful commitment.
Is ATTINY861A-XU in stock?
Current ATTINY861A-XU inventory should be checked through the Request a Quote form on this page. A distributor page may not reflect a live stock reservation, particularly when exact date codes, quantities, or production-release conditions are required. Specify whether full quantity is needed at once and whether any permitted date-code range is acceptable. Do not treat a general catalog listing as a confirmed allocation for a scheduled build.

Engineering reference data for ATTINY861A-XU — comparison, design guidance, and compliance information.

Selection Guide

Choose ATTINY861A-XU when a compact 20 MHz AVR controller needs the full 8 KB program space, 512 bytes of EEPROM, 512 bytes of SRAM, and 16 I/O lines without changing the established 20-pin TSSOP layout. ATTINY261A-XU is appropriate for simpler designs whose firmware and data comfortably fit 2 KB of Flash, 128 bytes of EEPROM, and 128 bytes of SRAM. Consider ATTINY461A-XU for an intermediate memory requirement, but verify its peripheral set and recompile the firmware. None of these alternatives should be selected solely from the package name: confirm reset behavior, timer channels, comparator or ADC resources, programming method, interrupt requirements, and supply timing against the schematic. The ATTINY861A-XU is the safest choice when existing firmware, data structures, or peripherals depend on the larger memory and full device capability.

Comparison with Alternatives

Parameter This Product ATTINY261A-XU ATTINY461A-XU
Package 20-pin TSSOP 20-pin TSSOP - same 20-pin TSSOP - same
Brand Microchip Technology Microchip Technology Microchip Technology
Maximum Clock Frequency 20 MHz 20 MHz 20 MHz
Flash Memory 8 KB 2 KB 4 KB
EEPROM 512 bytes 128 bytes 256 bytes
SRAM 512 bytes 128 bytes 256 bytes
General-Purpose I/O Lines 16 16 16
Supply Voltage Range 1.8 V to 5.5 V 1.8 V to 5.5 V 1.8 V to 5.5 V
General-Purpose Working Registers 32 32 32
Programming Method In-system programmable Flash In-system programmable Flash In-system programmable Flash

Key Differentiators

  • Higher Flash capacity within the same tinyAVR family (vs ATTINY261A-XU)
  • More nonvolatile and working memory (vs ATTINY261A-XU)
  • Larger memory budget than the intermediate family member (vs ATTINY461A-XU)

Design Notes

Verify the 20-pin TSSOP footprint against the package drawing in the Microchip ATtiny861A documentation before routing. Keep the exposed programming and programming-signals area accessible if in-system programming is required, place the decoupling capacitor close to the supply pins, and maintain unobstructed copper access around the device. Because alternative family members share the package but differ in memory and peripherals, use the exact device pin table for every PCB revision.

Design the supply for the complete ATTINY861A-XU operating range of 1.8 V to 5.5 V, including ripple, startup, and peripheral load conditions. Add local supply decoupling and provide a clean connection to every ground pin. If the device is battery powered, calculate average current from the active-current estimate, sleep-current estimate, clock behavior, and duty cycle; do not use a maximum operating current figure as the battery-sizing value.

The principal replacement risk is memory mismatch rather than package mismatch. ATTINY261A-XU has only 2 KB of Flash, 128 bytes of EEPROM, and 128 bytes of SRAM, so firmware built for ATTINY861A-XU may exceed its Flash and RAM capacity. Before substituting a family member, rebuild the firmware, check every used peripheral and interrupt vector, verify boot-code assumptions, and confirm that configuration data still fits the smaller EEPROM.

Separate sensitive analog inputs and communication lines from fast-switching or high-current outputs. If the TSSOP carries sensor signals, use a quiet ground path and place input filtering close to the source. Keep oscillator, programming, and decoupling connections short, and review unused pins against the device documentation rather than leaving them floating without checking whether the family device requires a defined state.

Compliance Information

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The LCSC product listing identifies the ATTINY861A-XU as RoHS compliant. No automotive qualification or additional environmental declarations are stated.

Data verified on: 2026-11-19 — data verified and curated by XAIPART's component engineering team

Related Searches

attiny861a datasheet attiny861a pinout attiny861a microcontroller attiny861a arduino microcontrolador attiny861a ATTINY861A-XU datasheet pdf ATTINY861A-XU pinout ATTINY861A-XU equivalent ATTINY861A-XU replacement ATTINY861A-XU vs ATTINY261A-XU ATTINY861A-XU price ATTINY861A-XU stock Microchip ATTINY861A-XU

Related Components & Terms

Microchip Technology ATTINY861A-XU ATTINY861A ATTINY261A-XU ATTINY461A-XU AVR tinyAVR 8-bit microcontroller RISC processor embedded controller semiconductor picoPower in-system programmable Flash EEPROM SRAM general-purpose I/O timer/counter compare mode 20-pin TSSOP TSSOP package family surface-mount package Arduino-compatible controller industrial control sensor interface LED sequencer motor controller
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details