ATTINY861A-XU - 20MHz 8KB AVR MCU | Microchip
MPN: ATTINY861A-XU ✓ فعالATTINY861A-XU جائزہ
A microcontroller is a programmable semiconductor that integrates a CPU core, memory, I/O ports, and peripherals on one chip. The ATTINY861A belongs to the AVR and tinyAVR families within the broader embedded-controller hierarchy. Its RISC-based architecture executes compact control software, while the 8 KB Flash program memory allows boot code, application logic, and configuration data to be stored directly on the device.
Three features define the device's practical capability. Its 20 MHz maximum clock supports faster control-loop and peripheral timing than lower-frequency 8-bit AVR implementations. Its 16 general-purpose I/O lines provide interfaces for sensors, actuators, indicators, and communications. The 512-byte EEPROM also supports nonvolatile parameter storage, while the 512-byte SRAM provides working memory for stacks, variables, and intermediate calculations.
The ATTINY861A device family includes an 8-bit timer/counter with compare modes, along with 16 I/O lines and 32 working registers. These resources support compact control tasks such as timing pulse generation, sensor sampling, motor or LED control, and sequential logic. The picoPower architecture is intended to balance processing capability with low-power operation, although an exact active-current figure is not stated on the manufacturer product page.
Typical uses include compact industrial controllers, battery-powered sensing modules, LED lighting controllers, small motor-control boards, and Arduino-compatible hobby projects. The 20-pin TSSOP package supports dense PCB layouts, while the relatively small memory capacity favors embedded applications whose firmware can be kept compact.
For PCB implementation, use the pin-description table and connection diagrams in the Microchip ATtiny861A documentation when assigning tracks. The TSSOP lead pitch requires careful footprint verification, and programming, clock, reset, and decoupling connections should follow the device's established reference patterns rather than relying solely on generic MCU layouts.
This page combines the manufacturer's device description with pin-compatible family alternatives, a parameter comparison, application guidance, and practical design notes. It is intended to accelerate component selection while preserving the distinction between a true PCB-compatible choice and a merely similar microcontroller.
کے لیے ڈراپ اِن متبادل ATTINY861A-XU — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
ATTINY261A-XU
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →ATTINY461A-XU
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →ATTINY861A-XU زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Product Type | 8-bit AVR RISC microcontroller |
| زیادہ سے زیادہ کلاک فریکوئنسی | 20 MHz |
| Flash Memory | 8 KB in-system programmable |
| Flash Organization | 4K x 16 |
| EEPROM | 512 bytes |
| SRAM | 512 bytes |
| General-Purpose I/O Lines | 16 |
| General-Purpose Working Registers | 32 |
| Timer/Counter | 8-bit timer/counter with compare modes |
| Architecture | AVR 8-bit RISC |
| Low-Power Technology | picoPower |
| Supply Voltage Range | 1.8 V to 5.5 V |
| Nominal Supply Voltages | 2.5 V, 3.3 V, and 5 V |
| پیکیج | 20-pin TSSOP |
| ماؤنٹنگ ٹائپ | Surface mount |
| RoHS اسٹیٹس | Compliant |
| Programming Interface | In-system programmable Flash |
ATTINY861A-XU 20-pin tssop پن کنفیگریشن گائیڈ
ATTINY861A-XU (20-pin tssop پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں ATTINY861A-XU.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
ATTINY861A-XU کے لیے موزوں ہے 6 ایپلیکیشنs: Compact Industrial Control Module, Battery-Powered Sensor Interface, LED Lighting and Sequencer, Small Motor and Actuator Controller, Arduino-Compatible Automation Controller, Remote Control and Keypad Interface.
Compact Industrial Control Module
The ATTINY861A-XU fits compact control modules that supervise sensors, indicators, relays, or small actuators over a 1.8 V to 5.5 V supply. Its 16 general-purpose I/O lines provide practical interface capacity, while the 20 MHz AVR core supports responsive sequencing and timer-based control. The 8 KB Flash accommodates a complete embedded program, and 512 bytes of EEPROM can retain calibration values or operating counters. Designers should partition the 512-byte SRAM carefully for stacks and variables, particularly if interrupt handlers or buffered communication routines are added.
تجویز کردہ
Battery-Powered Sensor Interface
The ATTINY861A-XU is suitable for a small battery-powered sensor interface that periodically reads an analog or digital sensor and records operating information. Its 16 I/O lines can support sensor inputs, status indicators, and a serial communication interface, while the picoPower 8-bit AVR architecture is designed around efficient embedded control. The 512-byte EEPROM is useful for preserving counters or calibration data across power cycles, although write endurance and retention should be considered for frequently updated values. Average-current calculations must include the selected clock source and active duration.
تجویز کردہ
LED Lighting and Sequencer
The ATTINY861A-XU can implement an LED sequencer, status-light controller, or programmable illumination timer using its 16 general-purpose I/O lines and 8-bit timer/counter with compare modes. At 20 MHz, the device can manage multiple timing events and software-driven sequences while reserving pins for a button, serial configuration interface, and fault indication. Its 8 KB Flash provides room for patterns and control logic, while 512 bytes of SRAM is adequate when animation state is compact. Constant-current LED drivers and high-power strings still require suitable external transistor and thermal designs.
تجویز کردہ
Small Motor and Actuator Controller
The ATTINY861A-XU is appropriate for low-power motor, valve, or actuator control where a compact 8-bit microcontroller must coordinate input sensing, timing, and output switching. Sixteen I/O lines provide connections for control inputs, status feedback, and external driver interfaces, while the timer/counter compare modes support repeatable pulse and period generation. The 20-pin TSSOP package keeps the controller area small, but the MCU does not directly replace a motor driver, current-sense amplifier, or power-stage MOSFET. Verify stall current, switching frequency, protection behavior, and thermal rise in the complete actuator circuit.
تجویز کردہ
Arduino-Compatible Automation Controller
The ATTINY861A-XU can serve as the controller in an Arduino-compatible automation or educational platform using 3.3 V or 5 V logic. The device supports 16 general-purpose I/O lines, 20 MHz operation, and in-system programmable Flash, enabling straightforward firmware updates and peripheral interfacing. Its 8 KB program-memory limit favors concise sketches or tightly compiled control logic, and a board-specific bootloader or programming connector must be implemented correctly. Verify the exact Arduino pin mapping because physical connector labels do not necessarily correspond to the same numbered MCU pins.
تجویز کردہ
Remote Control and Keypad Interface
The ATTINY861A-XU fits remote-control panels, keypad scanners, and simple human-interface modules where a microcontroller must detect inputs and update LEDs or an attached display. Its 16 I/O lines can be divided among matrix keys, status LEDs, and a communications interface, while the 8-bit timer/counter supports debouncing, periodic scanning, or output timing. The 512-byte EEPROM can store configuration settings, and the 8 KB Flash supports structured keypad and communication routines. For matrix scanning, account for ghost-key states and settle time rather than assuming every key event is a single electrical transition.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا ATTINY861A-XU — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | ATTINY261A-XU | ATTINY461A-XU |
|---|---|---|---|
| Package | 20-pin TSSOP | 20-pin TSSOP - same | 20-pin TSSOP - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Maximum Clock Frequency | 20 MHz | 20 MHz | 20 MHz |
| Flash Memory | 8 KB | 2 KB | 4 KB |
| EEPROM | 512 bytes | 128 bytes | 256 bytes |
| SRAM | 512 bytes | 128 bytes | 256 bytes |
| General-Purpose I/O Lines | 16 | 16 | 16 |
| Supply Voltage Range | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V |
| General-Purpose Working Registers | 32 | 32 | 32 |
| Programming Method | In-system programmable Flash | In-system programmable Flash | In-system programmable Flash |
اہم امتیازی خصوصیات
- Higher Flash capacity within the same tinyAVR family (بمقابلہATTINY261A-XU)
- More nonvolatile and working memory (بمقابلہATTINY261A-XU)
- Larger memory budget than the intermediate family member (بمقابلہATTINY461A-XU)
ڈیزائن نوٹس
Verify the 20-pin TSSOP footprint against the package drawing in the Microchip ATtiny861A documentation before routing. Keep the exposed programming and programming-signals area accessible if in-system programming is required, place the decoupling capacitor close to the supply pins, and maintain unobstructed copper access around the device. Because alternative family members share the package but differ in memory and peripherals, use the exact device pin table for every PCB revision.
Design the supply for the complete ATTINY861A-XU operating range of 1.8 V to 5.5 V, including ripple, startup, and peripheral load conditions. Add local supply decoupling and provide a clean connection to every ground pin. If the device is battery powered, calculate average current from the active-current estimate, sleep-current estimate, clock behavior, and duty cycle; do not use a maximum operating current figure as the battery-sizing value.
The principal replacement risk is memory mismatch rather than package mismatch. ATTINY261A-XU has only 2 KB of Flash, 128 bytes of EEPROM, and 128 bytes of SRAM, so firmware built for ATTINY861A-XU may exceed its Flash and RAM capacity. Before substituting a family member, rebuild the firmware, check every used peripheral and interrupt vector, verify boot-code assumptions, and confirm that configuration data still fits the smaller EEPROM.
Separate sensitive analog inputs and communication lines from fast-switching or high-current outputs. If the TSSOP carries sensor signals, use a quiet ground path and place input filtering close to the source. Keep oscillator, programming, and decoupling connections short, and review unused pins against the device documentation rather than leaving them floating without checking whether the family device requires a defined state.
تعمیل کی معلومات
The LCSC product listing identifies the ATTINY861A-XU as RoHS compliant. No automotive qualification or additional environmental declarations are stated.