ATXMEGA64D3-MN - 32MHz 64KB AVR MCU | Microchip Technology
MPN: ATXMEGA64D3-MN ✓ ActiveATXMEGA64D3-MN Overview
An 8/16-bit microcontroller is a programmable semiconductor that integrates a processor core, nonvolatile program memory, data memory, and peripherals into one device. The ATXMEGA family belongs to the hierarchy of microcontroller, embedded processor, semiconductor, and electronic component. It combines an AVR processing core with programmable peripherals that support event-driven control, timing, communications, analog measurement, and data acquisition without requiring separate logic devices for every function.
The XMEGA D3 architecture includes 64 KB of ISP Flash with read-while-write capability and a 4 KB boot-code section. Its memory arrangement supports firmware update, bootloader operation, and moderate data-processing workloads. The device also provides 2 KB of EEPROM for persistent parameters, 4 KB of SRAM for working data, and a four-channel event system that can connect peripherals directly and reduce processor intervention during time-critical operations.
The ATXMEGA64D3-MN supports operation from a 1.6 V to 3.6 V supply, allowing use in low-voltage industrial, consumer, communications, and embedded-control products. Its 32 MHz maximum clock rate provides useful performance for protocol handling, control loops, human-machine-interface scanning, and supervisory tasks while retaining the efficiency expected from an 8/16-bit architecture.
Typical applications include industrial data-acquisition modules, compact control boards, sensor-hub controllers, communication equipment, and low-power embedded products. The 64 KB Flash capacity is suitable for moderate application firmware, while the event system and programmable multi-level interrupt logic help designers organize deterministic responses across internal peripherals.
Design decisions should include careful review of pin multiplexing, supply decoupling, exposed-pad layout, and programming configuration before PCB release. Because the package contains 64 leads and an exposed thermal pad, the land pattern and soldering process must match the manufacturer package drawing. Use the pin-description table in the manufacturer datasheet when assigning traces and programming the I/O multiplexing registers.
This page combines manufacturer and distributor product information with application guidance, design notes, comparison fields, and verified drop-in replacement screening. The alternatives list intentionally excludes unverified package variants so that engineers can distinguish an electrically similar device from a genuinely pin-compatible replacement.
Drop-in alternatives for ATXMEGA64D3-MN — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with ATXMEGA64D3-MN (same form factor and footprint) — differing in Package, Event System Channels.
ATXMEGA64D3-MH
✅ Drop-InContact for price
View Datasheet →ATXMEGA128A3U-MN
✅ Drop-In📋 Reference alternative (not in catalog)
ATXMEGA64D3-MNR
✅ Drop-In📋 Reference alternative (not in catalog)
ATXMEGA64A3-MN
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
ATXMEGA64D4-MN
✅ Drop-In ⚠️ Specs UnverifiedContact for price
View Datasheet →ATXMEGA64D3-MN Maximum Ratings & Electrical Characteristics
| Product Type | 8/16-bit AVR XMEGA D3 microcontroller |
| Maximum Clock Frequency | 32 MHz |
| Flash Memory | 64 KB |
| Flash Organization | 32K x 16 |
| Boot Loader Section | 4 KB |
| EEPROM Memory | 2 KB |
| SRAM | 4 KB |
| Operating Voltage | 1.6 V to 3.6 V |
| Event System Channels | 4 channels |
| Programmable Multi-Level Interrupt Logic | Supported |
| ISP Flash Read-While-Write | Supported |
| Package | 64-VFQFN with exposed pad |
| Package Dimensions | 9 mm x 9 mm |
| Lead Count | 64 pins |
| Mounting Type | Surface mount |
| Temperature Rating | 105 C |
| Green Product Classification | Green |
| Programming Interface | ISP |
ATXMEGA64D3-MN 9 mm x 9 mm Pin Configuration Guide
Pin configuration for ATXMEGA64D3-MN (9 mm x 9 mm package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for ATXMEGA64D3-MN.
Refer to the datasheet for full pin configuration.
Typical Applications
ATXMEGA64D3-MN is suitable for 6 applications: Industrial Data-Acquisition Controller, Low-Voltage Sensor Hub, Communication Equipment Controller, Compact HMI and Control Panel, Battery-Powered Monitoring Device, Programmable Logic Controller.
Industrial Data-Acquisition Controller
The ATXMEGA64D3-MN fits compact data-acquisition equipment that must collect sensor information while managing control logic and communications on one PCB. Its 32 MHz clock supports responsive task scheduling, while 64 KB of ISP Flash provides room for application firmware, drivers, and protocol handlers. The four-channel event system can coordinate timer, capture, and communication events with less processor polling, helping preserve deterministic response time. The 1.6 V to 3.6 V operating range also supports low-voltage industrial architectures. Design the analog front end separately, and use the manufacturer I/O and pin tables when assigning external sensor interfaces, status indicators, and communication signals.
Recommended
Low-Voltage Sensor Hub
The ATXMEGA64D3-MN is appropriate for a low-voltage sensor hub that combines periodic measurements, local filtering, status reporting, and configuration storage. Its 4 KB of SRAM supports working buffers and communication structures, while 2 KB of EEPROM can retain calibration values or device settings. The event system is particularly useful when several internal events must be prioritized without continuous polling. Operation from 1.6 V to 3.6 V allows integration with modern low-voltage sensors and power-management stages. Keep unused I/O pins in defined states, review wake-up behavior, and confirm timer accuracy against the system measurement schedule before finalizing the embedded design.
Recommended
Communication Equipment Controller
ATXMEGA64D3-MN can serve as the supervisory controller in communication equipment that needs protocol management, configuration storage, and coordinated timing. The 32 MHz operating rate provides useful headroom for packet processing and status handling, and the 64 KB Flash capacity supports embedded firmware, communication stacks, and update logic. Its programmable multi-level interrupt logic can help service several event sources according to priority. For a production design, calculate protocol timing margins at the operating temperature and supply limits, isolate communication transceivers from sensitive timing paths, and validate every assigned peripheral and multiplexing option against the manufacturer pin and clock documentation.
Recommended
Compact HMI and Control Panel
The ATXMEGA64D3-MN can manage a compact human-machine interface with buttons, indicators, a small display, and an embedded control sequence. Its 64 KB of ISP Flash is suitable for interface logic and moderate application code, while 4 KB of SRAM can hold display buffers and input state. Event-driven peripheral coordination helps scan controls and update indicators efficiently. A 1.6 V to 3.6 V supply range supports compact mixed-signal systems, although an appropriate regulator and level-compatible display interface remain necessary. Place decoupling close to each supply connection, review active current across display and indicator loads, and use the manufacturer's package drawing to establish the exposed-pad connection before fabrication.
Recommended
Battery-Powered Monitoring Device
ATXMEGA64D3-MN is suitable for a battery-powered environmental or asset-monitoring device that needs local logic, nonvolatile parameters, and low-voltage operation. EEPROM can preserve calibration data, thresholds, and counters, reducing repeated configuration activity through the communications interface. The 32 MHz clock provides enough performance for sampling coordination and protocol tasks without requiring a more complex processor architecture. Energy optimization still depends on the chosen active mode, idle mode, peripheral clocks, sensor duty cycle, and regulator efficiency. Validate wake-up timing, brownout behavior, and current consumption on the assembled board, and keep sensor excitation paths switched away from the MCU supply whenever the design permits.
Recommended
Programmable Logic Controller
The ATXMEGA64D3-MN can be used in a small PLC or machine-control module where deterministic digital inputs, timer functions, interlocks, communications, and local diagnostics must be coordinated. Its four-channel event system and multi-level interrupt logic help structure time-sensitive internal events, while the 64 KB Flash capacity supports control routines and a bootloader. The 1.6 V to 3.6 V operating range supports industrial control modules built around low-voltage logic. Engineer the safety margin around worst-case clock accuracy, supply tolerance, and peripheral timing. Review reset behavior, watchdog use, I/O isolation, output-driver loading, and fail-safe states before using the device as part of a production control system.
Recommended
Recommended Products Summary
Engineering reference data for ATXMEGA64D3-MN — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product |
|---|---|
| Brand | Microchip Technology |
| Package | 64-VFQFN with exposed pad, 9 mm x 9 mm |
| Product Type | 8/16-bit AVR XMEGA D3 microcontroller |
| Maximum Clock Frequency | 32 MHz |
| Flash Memory | 64 KB |
| EEPROM Memory | 2 KB |
| SRAM | 4 KB |
| Operating Voltage | 1.6 V to 3.6 V |
| Event System | 4 channels |
| Programmable Multi-Level Interrupt Logic | Supported |
Key Differentiators
- Balanced embedded-control resource set (vs ATXMEGA64A1-CUR)
- Event-driven peripheral coordination (vs ATXMEGA256D3-AU)
- Compact 64-VFQFN implementation (vs ATXMEGA256D3-AU)
Design Notes
Use the manufacturer 64-VFQFN land pattern and exposed-pad geometry rather than a generic QFN footprint. Connect the exposed pad as directed in the package drawing, preserve the specified solder-mask and copper clearance, and place decoupling capacitors adjacent to the relevant supply pins. Adequate short power paths reduce inductive voltage excursions when the 32 MHz core and switching peripherals change state.
Assign communication, timer-sensitive, programming, and reset functions only after checking the pin-multiplexing matrix in the manufacturer data sheet. Keep crystal or clock paths short and return high-current outputs to suitable ground planes. Because peripheral functions can move between pins through configuration registers, document the final fuse and software settings alongside the schematic so the PCB and firmware remain synchronized.
Estimated: the regulator power loss depends on the selected supply voltage, core current, and peripheral activity, so calculate it from the actual operating mode rather than using a fixed dissipation value. Verify the minimum and maximum input voltage against the 1.6 V to 3.6 V device range, include startup margin for the internal clock and I/O loads, and confirm that the selected supply remains stable through clock transitions and peripheral activation.
Do not treat a related XMEGA ordering code as a drop-in replacement solely because it has a similar flash capacity. Verify the 64-pin package dimensions, exposed-pad assignment, pin names, alternate-function assignments, clock system, memory organization, boot configuration, and electrical limits. Also confirm that programming tools and boot logic support the replacement before releasing any substitute into production.
Compliance Information
Distributor listings identify the device as green, but the exact RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive-qualification declarations for this ordering code require confirmation from Microchip Technology.